1
0
mirror of https://github.com/fadden/6502bench.git synced 2025-01-22 12:33:56 +00:00
6502bench/SourceGen/SGTestData/Source/2021-external-symbols.S

121 lines
3.8 KiB
ArmAsm
Raw Normal View History

Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
; Copyright 2019 faddenSoft. All Rights Reserved.
; See the LICENSE.txt file for distribution terms (Apache 2.0).
;
; Assembler: Merlin 32
; EDIT: the project must include the three platform symbol files.
org $1000
; make sure platform symbols don't get set for file data
; DO NOT set a user label here
Start lda Start-1 ;CodeWrap+255
ldx Start ;(auto)
ldy Start+1 ;(auto+1)
lda END ;(auto)
lda END+1 ;CodeWrap+X
lda END+8 ;CodeWrap+Y
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
nop
; test overlapping labels (multiple sym files)
lda $1ffe ;(no sym)
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
lda $1fff ;should be SameName1-1
lda $2000 ;should be SameName1
lda $200f ;(no sym)
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
lda $2010 ;should be SameName2-1
lda $2011 ;should be SameName2
lda $2012 ;(no sym)
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
lda $201f ;(no sym)
lda $2020 ;(no sym)
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
lda $2021 ;should be sym-1
lda $2022 ;should be SameName3
nop
; test overlapping values (multiple sym files)
lda $2100 ;should be SameValA_A
lda $2110 ;should be SameValB_A
lda $2120 ;should be SameValC_C
nop
; test overlap with project symbol
; EDIT: define project symbols ProjSym1 at $2202(4b) and ProjSim2 at $220a(1b)
lda $21fe ;(no sym)
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
lda $21ff ;SYM-1
lda $2200 ;ChkProj1
lda $2201 ;ChkProj1+1
lda $2202 ;ProjSym
lda $2203 ;ProjSym1+1
lda $2204 ;ProjSym1+2
lda $2205 ;ProjSym1+3
lda $2206 ;ChkProj2+2
lda $2207 ;ChkProj2+3
lda $2208 ;(no sym)
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
lda $2209 ;ProjSym2-1
lda $220a ;ProjSym2
lda $220b ;(no sym)
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
nop
; test overlapping regions, single file
lda $2ffe ;(no sym)
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
lda $2fff ;Over1-1
lda $3000 ;Over1
lda $3001 ;Over1+1
lda $3002 ;Over2
lda $3003 ;Over2+1
lda $3004 ;Over2+2
lda $3005 ;Over2+3
lda $3006 ;Over2a
lda $3007 ;Over3+1
lda $3008 ;Over3+2
lda $3009 ;Over3+3
lda $300a ;Over3+4
lda $300b ;Over3+5
lda $300c ;Over3+6
lda $300d ;Over1+13
lda $300e ;Over1+14
lda $300f ;Over1+15
lda $3010 ;(no sym)
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
nop
; test overlapping regions, multiple platform files
lda $30fe ;(no sym)
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
lda $30ff ;SepOver1-1
lda $3100 ;SepOver1
lda $3101 ;SepOver1+1
lda $3102 ;SepOver1+2
lda $3103 ;SepOver1+3
lda $3104 ;SepOver2+2
lda $3105 ;SepOver2+3
lda $3106 ;(no sym)
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
nop
; test overlap with local variable
; EDIT: create variable LocalVar at $41(2b)
ldx $3e ;(no sym)
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
ldx $3f ;should be OverVar-1
ldx $40 ;should be OverVar
ldx $41 ;should be LocalVar
ldx $42 ;should be LocalVar+1
ldx $43 ;should be OverVar+3
ldx $44 ;(no sym)
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
nop
lda $3fff ;EDIT: change to "FatConst"
lda $4000 ;(no sym)
lda $4001 ;(no sym)
Allow explicit widths in project/platform symbols, part 3 Implement multi-byte project/platform symbols by filling out a table of addresses. Each symbol is "painted" into the table, replacing an existing entry if the new entry has higher priority. This allows us to handle overlapping entries, giving boosted priority to platform symbols that are defined in .sym65 files loaded later. The bounds on project/platform symbols are now rigidly defined. If the "nearby" feature is enabled, references to SYM-1 will be picked up, but we won't go hunting for SYM+1 unless the symbol is at least two bytes wide. The cost of adding a symbol to the symbol table is about the same, but we don't have a quick way to remove a symbol. Previously, if two platform symbols had the same value, the symbol with the alphabetically lowest label would win. Now, the symbol defined in the most-recently-loaded file wins. (If you define two symbols with the same value in the same file, it's still resolved alphabetically.) This allows the user to pick the winner by arranging the load order of the platform symbol files. Platform symbols now keep a reference to the file ident of the symbol file that defined them, so we can show the symbols's source in the Info panel. These changes altered the behavior of test 2008-address-changes, which includes some tests on external addresses that are close to labeled internal addresses. The previous behavior essentially treated user labels as being 3 bytes wide and extending outside the file bounds, which was mildly convenient on occasion but felt a little skanky. (We could do with a way to define external symbols relative to internal symbols, for things like the source address of code that gets relocated.) Also, re-enabled some unit tests. Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:26:05 -07:00
; test bank wrap
lda $fff8 ;should be BankWrap+8
lda $08 ;should be BankWrap+24 or <BankWrap-232
END rts