6502/6502bench
1
0
Fork 0
mirror of https://github.com/fadden/6502bench.git synced 2024-11-05 06:04:36 +00:00
Code Issues Projects Releases Wiki Activity
cd937709fa
6502bench/SourceGen/WpfGui/EditAppSettings.xaml

833 lines
57 KiB
Plaintext
Raw Normal View History

Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
<!--
Copyright 2019 faddenSoft
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
Move WPF code from SourceGenWPF to SourceGen
2019-07-20 20:28:10 +00:00
<Window x:Class="SourceGen.WpfGui.EditAppSettings"
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
Change how the "quick set" settings work The last two tabs in the Edit App Settings dialog have "quick set" buttons configure all fields for a particular assembler, or reset them to default values. The previous UI was a little annoying, because you had to pick something from the combo box and then hit "set" to push the change. It was also confusing, because if you came back later the combo box was just set to the first entry, not the thing you picked last. Now, picking an entry from the combo box immediately updates all fields. The combo box selection is set to reflect the actual contents (so if you set everything just right, the combo box will change to a specific assembler). If nothing matches, a special entry labeled "Custom" is selected. Also, rearranged the tutorial sections in the manual so the address table formatting comes last, and appears in the local TOC.
2019-10-12 00:39:52 +00:00
xmlns:system="clr-namespace:System;assembly=mscorlib"
Move WPF code from SourceGenWPF to SourceGen
2019-07-20 20:28:10 +00:00
xmlns:local="clr-namespace:SourceGen.WpfGui"
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
mc:Ignorable="d"
Title="Edit Application Settings"
Implemented the first ("Code View") tab of settings Notable items include the column show/hide buttons, which were straightforward except for the "determine the default width" part, and the font picker, which is no longer a standard dialog. The latter was complicated by the absence of a good way to detect whether a font is mono-spaced or not without calling back into code meant for WinForms font manipulation (with a dash of PInvoke). Yay WPF. Also, enabled character ellipsis for code list items.
2019-06-27 00:11:58 +00:00
Width="700" Height="440" ResizeMode="NoResize"
ShowInTaskbar="False" WindowStartupLocation="CenterOwner"
Loaded="Window_Loaded">
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
Change how the "quick set" settings work The last two tabs in the Edit App Settings dialog have "quick set" buttons configure all fields for a particular assembler, or reset them to default values. The previous UI was a little annoying, because you had to pick something from the combo box and then hit "set" to push the change. It was also confusing, because if you came back later the combo box was just set to the first entry, not the thing you picked last. Now, picking an entry from the combo box immediately updates all fields. The combo box selection is set to reflect the actual contents (so if you set everything just right, the combo box will change to a specific assembler). If nothing matches, a special entry labeled "Custom" is selected. Also, rearranged the tutorial sections in the manual so the address table formatting comes last, and appears in the local TOC.
2019-10-12 00:39:52 +00:00
<Window.Resources>
Add "quick set" menu to delimiter settings tab Added a pop-up menu with three options: default (curly quotes), straight, and Merlin. Removed the "reset to defaults" buttons. Also, slightly rearranged the Display Format tab so that the quick set pop-up is on the left, near the items it affects. Moved the "use comma-separated format for bulk data" checkbox over as well, since it's part of the set.
2021-10-14 22:10:32 +00:00
<system:String x:Key="str_PresetCustom">Custom</system:String>
<system:String x:Key="str_PresetDefault">Default</system:String>
Change how the "quick set" settings work The last two tabs in the Edit App Settings dialog have "quick set" buttons configure all fields for a particular assembler, or reset them to default values. The previous UI was a little annoying, because you had to pick something from the combo box and then hit "set" to push the change. It was also confusing, because if you came back later the combo box was just set to the first entry, not the thing you picked last. Now, picking an entry from the combo box immediately updates all fields. The combo box selection is set to reflect the actual contents (so if you set everything just right, the combo box will change to a specific assembler). If nothing matches, a special entry labeled "Custom" is selected. Also, rearranged the tutorial sections in the manual so the address table formatting comes last, and appears in the local TOC.
2019-10-12 00:39:52 +00:00
<system:String x:Key="str_ExpStyleCommon">Common</system:String>
<system:String x:Key="str_ExpStyleCc65">cc65</system:String>
<system:String x:Key="str_ExpStyleMerlin">Merlin</system:String>
Add "quick set" menu to delimiter settings tab Added a pop-up menu with three options: default (curly quotes), straight, and Merlin. Removed the "reset to defaults" buttons. Also, slightly rearranged the Display Format tab so that the quick set pop-up is on the left, near the items it affects. Moved the "use comma-separated format for bulk data" checkbox over as well, since it's part of the set.
2021-10-14 22:10:32 +00:00
<system:String x:Key="str_DelimStraight">Straight</system:String>
<system:String x:Key="str_DelimMerlin">Merlin</system:String>
Change how the "quick set" settings work The last two tabs in the Edit App Settings dialog have "quick set" buttons configure all fields for a particular assembler, or reset them to default values. The previous UI was a little annoying, because you had to pick something from the combo box and then hit "set" to push the change. It was also confusing, because if you came back later the combo box was just set to the first entry, not the thing you picked last. Now, picking an entry from the combo box immediately updates all fields. The combo box selection is set to reflect the actual contents (so if you set everything just right, the combo box will change to a specific assembler). If nothing matches, a special entry labeled "Custom" is selected. Also, rearranged the tutorial sections in the manual so the address table formatting comes last, and appears in the local TOC.
2019-10-12 00:39:52 +00:00
</Window.Resources>
Rough project properties layout
2019-07-01 21:07:30 +00:00
<DockPanel Margin="8">
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
<StackPanel DockPanel.Dock="Bottom" Orientation="Horizontal" HorizontalAlignment="Right">
<Button Name="applyButton" Content="Apply" Margin="0,0,20,0"
Implemented the first ("Code View") tab of settings Notable items include the column show/hide buttons, which were straightforward except for the "determine the default width" part, and the font picker, which is no longer a standard dialog. The latter was complicated by the absence of a good way to detect whether a font is mono-spaced or not without calling back into code meant for WinForms font manipulation (with a dash of PInvoke). Yay WPF. Also, enabled character ellipsis for code list items.
2019-06-27 00:11:58 +00:00
Width="70" IsEnabled="{Binding IsDirty}" Click="ApplyButton_Click"/>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
<Button Name="okButton" Content="OK" IsDefault="True"
Implemented the first ("Code View") tab of settings Notable items include the column show/hide buttons, which were straightforward except for the "determine the default width" part, and the font picker, which is no longer a standard dialog. The latter was complicated by the absence of a good way to detect whether a font is mono-spaced or not without calling back into code meant for WinForms font manipulation (with a dash of PInvoke). Yay WPF. Also, enabled character ellipsis for code list items.
2019-06-27 00:11:58 +00:00
Width="70" Click="OkButton_Click"/>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
<Button Name="cancelButton" Content="Cancel" IsCancel="True"
Width="70" Margin="4,0,0,0"/>
</StackPanel>
Implemented the first ("Code View") tab of settings Notable items include the column show/hide buttons, which were straightforward except for the "determine the default width" part, and the font picker, which is no longer a standard dialog. The latter was complicated by the absence of a good way to detect whether a font is mono-spaced or not without calling back into code meant for WinForms font manipulation (with a dash of PInvoke). Yay WPF. Also, enabled character ellipsis for code list items.
2019-06-27 00:11:58 +00:00
<TabControl Name="tabControl" DockPanel.Dock="Top" Margin="0,0,0,8">
<TabItem Name="codeViewTab" Header="Code View">
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="0.75*"/>
<ColumnDefinition Width="*"/>
<ColumnDefinition Width="*"/>
</Grid.ColumnDefinitions>
<Grid.RowDefinitions>
<RowDefinition Height="Auto"/>
<RowDefinition Height="Auto"/>
<RowDefinition Height="*"/>
<RowDefinition Height="Auto"/>
</Grid.RowDefinitions>
Define and use "delimiter sets" A delimiter definition is four strings (prefix, open, close, suffix) that are concatenated with the character or string data to form an operand. A delimiter set is a collection of delimiter definitions, with separate entries for each character encoding. This is a convenient way to configure Formatter objects, import and export data from the app settings file, and manage the UI needed to allow the user to customize how things look. The full set of options didn't fit on the first app settings tab, so there's now a separate tab just for specifying character and string delimiters. (This might be overkill, but there are various plausible scenarios that make use of it.) The delimiters for on-screen display of strings can now be configured.
2019-08-14 22:25:09 +00:00
<GroupBox Grid.Column="0" Grid.Row="0" Grid.RowSpan="2" Header="Column Visibility"
Minor cleanup Remove left/right arrow PNGs. Remove duplicate copies of icon. Tweak some comments. Set application icon. Adjust padding on group boxes in first tab of app settings.
2019-08-12 20:45:00 +00:00
Margin="0,0,10,0" Padding="2,0">
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
<StackPanel>
Implemented the first ("Code View") tab of settings Notable items include the column show/hide buttons, which were straightforward except for the "determine the default width" part, and the font picker, which is no longer a standard dialog. The latter was complicated by the absence of a good way to detect whether a font is mono-spaced or not without calling back into code meant for WinForms font manipulation (with a dash of PInvoke). Yay WPF. Also, enabled character ellipsis for code list items.
2019-06-27 00:11:58 +00:00
<Button Name="showCol0" Content="{}{0} Offset" Width="120" Margin="0,4"
Click="ColumnVisibilityButton_Click"/>
<Button Name="showCol1" Content="{}{0} Address" Width="120" Margin="0,4"
Click="ColumnVisibilityButton_Click"/>
<Button Name="showCol2" Content="{}{0} Bytes" Width="120" Margin="0,4"
Click="ColumnVisibilityButton_Click"/>
<Button Name="showCol3" Content="{}{0} Flags" Width="120" Margin="0,4"
Click="ColumnVisibilityButton_Click"/>
<Button Name="showCol4" Content="{}{0} Attributes" Width="120" Margin="0,4"
Click="ColumnVisibilityButton_Click"/>
<Button Name="showCol5" Content="{}{0} Label" Width="120" Margin="0,4"
Click="ColumnVisibilityButton_Click"/>
<Button Name="showCol6" Content="{}{0} Opcode" Width="120" Margin="0,4"
Click="ColumnVisibilityButton_Click"/>
<Button Name="showCol7" Content="{}{0} Operand" Width="120" Margin="0,4"
Click="ColumnVisibilityButton_Click"/>
<Button Name="showCol8" Content="{}{0} Comment" Width="120" Margin="0,4"
Click="ColumnVisibilityButton_Click"/>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
</StackPanel>
</GroupBox>
<GroupBox Grid.Column="1" Grid.Row="0" Header="Code List Font"
Minor cleanup Remove left/right arrow PNGs. Remove duplicate copies of icon. Tweak some comments. Set application icon. Adjust padding on group boxes in first tab of app settings.
2019-08-12 20:45:00 +00:00
Margin="5,0,5,0" Padding="2,4">
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
<StackPanel>
Minor cleanup Remove left/right arrow PNGs. Remove duplicate copies of icon. Tweak some comments. Set application icon. Adjust padding on group boxes in first tab of app settings.
2019-08-12 20:45:00 +00:00
<TextBlock>Current font:</TextBlock>
Implemented the first ("Code View") tab of settings Notable items include the column show/hide buttons, which were straightforward except for the "determine the default width" part, and the font picker, which is no longer a standard dialog. The latter was complicated by the absence of a good way to detect whether a font is mono-spaced or not without calling back into code meant for WinForms font manipulation (with a dash of PInvoke). Yay WPF. Also, enabled character ellipsis for code list items.
2019-06-27 00:11:58 +00:00
<TextBlock Name="codeListFontDesc" Margin="0,4,0,0">10-pt Hoser Sans</TextBlock>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
<Button Content="Select Font..." Width="120" Margin="0,8,0,0"
Implemented the first ("Code View") tab of settings Notable items include the column show/hide buttons, which were straightforward except for the "determine the default width" part, and the font picker, which is no longer a standard dialog. The latter was complicated by the absence of a good way to detect whether a font is mono-spaced or not without calling back into code meant for WinForms font manipulation (with a dash of PInvoke). Yay WPF. Also, enabled character ellipsis for code list items.
2019-06-27 00:11:58 +00:00
HorizontalAlignment="Left" Click="SelectFontButton_Click"/>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
</StackPanel>
</GroupBox>
Define and use "delimiter sets" A delimiter definition is four strings (prefix, open, close, suffix) that are concatenated with the character or string data to form an operand. A delimiter set is a collection of delimiter definitions, with separate entries for each character encoding. This is a convenient way to configure Formatter objects, import and export data from the app settings file, and manage the UI needed to allow the user to customize how things look. The full set of options didn't fit on the first app settings tab, so there's now a separate tab just for specifying character and string delimiters. (This might be overkill, but there are various plausible scenarios that make use of it.) The delimiters for on-screen display of strings can now be configured.
2019-08-14 22:25:09 +00:00
<GroupBox Grid.Column="1" Grid.Row="1" Header="Upper Case Display"
Minor cleanup Remove left/right arrow PNGs. Remove duplicate copies of icon. Tweak some comments. Set application icon. Adjust padding on group boxes in first tab of app settings.
2019-08-12 20:45:00 +00:00
Margin="5,0,5,0" Padding="2,4">
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
<StackPanel>
Add first pass at source export dialog Ported the column width stuff from EditAppSettings, which it turns out can be simplified slightly. Moved the clipboard copy code out into its own class. Disabled "File > Print", which has never done anything and isn't likely to do anything in the near future. Also, added a note to 2019-local-variables about a test case it should probably have.
2019-09-11 00:43:31 +00:00
<CheckBox Content="Hexadecimal values" Margin="0,4"
Implemented the first ("Code View") tab of settings Notable items include the column show/hide buttons, which were straightforward except for the "determine the default width" part, and the font picker, which is no longer a standard dialog. The latter was complicated by the absence of a good way to detect whether a font is mono-spaced or not without calling back into code meant for WinForms font manipulation (with a dash of PInvoke). Yay WPF. Also, enabled character ellipsis for code list items.
2019-06-27 00:11:58 +00:00
IsChecked="{Binding UpperHexValues}"/>
<CheckBox Content="Opcodes" Margin="0,4"
IsChecked="{Binding UpperOpcodes}"/>
<CheckBox Content="Pseudo-opcodes" Margin="0,4"
IsChecked="{Binding UpperPseudoOps}"/>
<CheckBox Content="Operand A" Margin="0,4"
IsChecked="{Binding UpperOperandA}"/>
<CheckBox Content="Operand S" Margin="0,4"
IsChecked="{Binding UpperOperandS}"/>
<CheckBox Content="Operand X/Y" Margin="0,4"
IsChecked="{Binding UpperOperandXY}"/>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
<StackPanel Orientation="Horizontal">
Implemented the first ("Code View") tab of settings Notable items include the column show/hide buttons, which were straightforward except for the "determine the default width" part, and the font picker, which is no longer a standard dialog. The latter was complicated by the absence of a good way to detect whether a font is mono-spaced or not without calling back into code meant for WinForms font manipulation (with a dash of PInvoke). Yay WPF. Also, enabled character ellipsis for code list items.
2019-06-27 00:11:58 +00:00
<Button Content="All Lower" Width="75" Margin="0,4,0,0" Click="AllLower_Click"/>
<Button Content="All Upper" Width="75" Margin="8,4,0,0" Click="AllUpper_Click"/>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
</StackPanel>
</StackPanel>
</GroupBox>
<GroupBox Grid.Column="2" Grid.Row="0" Header="Clipboard"
Minor cleanup Remove left/right arrow PNGs. Remove duplicate copies of icon. Tweak some comments. Set application icon. Adjust padding on group boxes in first tab of app settings.
2019-08-12 20:45:00 +00:00
Margin="10,0,0,0" Padding="2,4">
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
<StackPanel>
Minor cleanup Remove left/right arrow PNGs. Remove duplicate copies of icon. Tweak some comments. Set application icon. Adjust padding on group boxes in first tab of app settings.
2019-08-12 20:45:00 +00:00
<TextBlock>Format for lines copied to clipboard:</TextBlock>
Implemented the first ("Code View") tab of settings Notable items include the column show/hide buttons, which were straightforward except for the "determine the default width" part, and the font picker, which is no longer a standard dialog. The latter was complicated by the absence of a good way to detect whether a font is mono-spaced or not without calling back into code meant for WinForms font manipulation (with a dash of PInvoke). Yay WPF. Also, enabled character ellipsis for code list items.
2019-06-27 00:11:58 +00:00
<ComboBox Name="clipboardFormatComboBox" IsReadOnly="True" Margin="0,8,0,0"
Clean up clipboard format combo box The order of items in XAML was tied to enum values, which isn't great. Since the value gets stored in the settings file, we want the values to come from the code-behind. So now we provide an ItemsSource for the combo box from the code-behind instead of defining the items in XAML.
2019-06-28 22:39:35 +00:00
ItemsSource="{Binding ClipboardFormatItems}" DisplayMemberPath="Name"
SelectionChanged="ClipboardFormatComboBox_SelectionChanged"/>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
</StackPanel>
</GroupBox>
Define and use "delimiter sets" A delimiter definition is four strings (prefix, open, close, suffix) that are concatenated with the character or string data to form an operand. A delimiter set is a collection of delimiter definitions, with separate entries for each character encoding. This is a convenient way to configure Formatter objects, import and export data from the app settings file, and manage the UI needed to allow the user to customize how things look. The full set of options didn't fit on the first app settings tab, so there's now a separate tab just for specifying character and string delimiters. (This might be overkill, but there are various plausible scenarios that make use of it.) The delimiters for on-screen display of strings can now be configured.
2019-08-14 22:25:09 +00:00
<GroupBox Grid.Column="2" Grid.Row="1" Header="Miscellaneous"
Margin="10,0,0,0" Padding="2,4">
<StackPanel>
Add toolbar button for "show cycle counts" Sometimes you just want to turn cycle counts on for a bit, and going through app settings is tiresome. Now there's a toolbar checkbox for it. The icon isn't ideal, but it'll do.
2020-09-05 00:49:28 +00:00
<CheckBox Content="Show cycle counts for instructions" Margin="0,4"
Split "show cycle counts" in two The "show cycle counts in comments" setting is the only one that affects both the on-screen display and generated source code. This felt a little weird, so it's now two independent settings. This also provided an opportunity to move it to the initial tab, so it's easier to toggle on and off. Overall it feels less confusing to have two settings for essentially the same thing, because code generation is distinct from everything else. The "spaces between bytes" setting was moved to the Display Format tab, which seems a better fit. Documentation and tutorial have been updated. Also did a little bit of cleanup in EditAppSettings.
2020-08-27 20:13:58 +00:00
IsChecked="{Binding ShowCycleCountsScreen}"/>
SourceGen After Dark Most of SourceGen uses standard WPF controls, which get their default style from the system theme. The main disassembly list uses a custom style, and always looks like the Windows default theme. Some people greatly prefer white text on a black background, so we now provide a way to get that. This also requires muting the colors used for Notes, since those were chosen to contrast with black text. This does not affect anything other than the ListView used for code, because everything else can be set through the Windows "personalization" interface. We might want to change the way the Notes window looks though, to avoid having glowing bookmarks on the side.
2019-10-13 00:23:32 +00:00
<CheckBox Content="Use &quot;dark&quot; color scheme" Margin="0,4"
IsChecked="{Binding DarkColorScheme}"/>
Define and use "delimiter sets" A delimiter definition is four strings (prefix, open, close, suffix) that are concatenated with the character or string data to form an operand. A delimiter set is a collection of delimiter definitions, with separate entries for each character encoding. This is a convenient way to configure Formatter objects, import and export data from the app settings file, and manage the UI needed to allow the user to customize how things look. The full set of options didn't fit on the first app settings tab, so there's now a separate tab just for specifying character and string delimiters. (This might be overkill, but there are various plausible scenarios that make use of it.) The delimiters for on-screen display of strings can now be configured.
2019-08-14 22:25:09 +00:00
</StackPanel>
</GroupBox>
<CheckBox Grid.Column="0" Grid.Row="4" Content="Enable DEBUG menu" Margin="4,16,0,0"
IsChecked="{Binding EnableDebugMenu}"/>
</Grid>
</TabItem>
<TabItem Name="textDelimitersTab" Header="Text Delimiters">
Add "quick set" menu to delimiter settings tab Added a pop-up menu with three options: default (curly quotes), straight, and Merlin. Removed the "reset to defaults" buttons. Also, slightly rearranged the Display Format tab so that the quick set pop-up is on the left, near the items it affects. Moved the "use comma-separated format for bulk data" checkbox over as well, since it's part of the set.
2021-10-14 22:10:32 +00:00
<DockPanel LastChildFill="False">
<TextBlock DockPanel.Dock="Top" Margin="4,0,0,0"
Text="Select pseudo-op names for display. This does not affect source code generation. Blank entries get a default value."/>
Define and use "delimiter sets" A delimiter definition is four strings (prefix, open, close, suffix) that are concatenated with the character or string data to form an operand. A delimiter set is a collection of delimiter definitions, with separate entries for each character encoding. This is a convenient way to configure Formatter objects, import and export data from the app settings file, and manage the UI needed to allow the user to customize how things look. The full set of options didn't fit on the first app settings tab, so there's now a separate tab just for specifying character and string delimiters. (This might be overkill, but there are various plausible scenarios that make use of it.) The delimiters for on-screen display of strings can now be configured.
2019-08-14 22:25:09 +00:00
Add "quick set" menu to delimiter settings tab Added a pop-up menu with three options: default (curly quotes), straight, and Merlin. Removed the "reset to defaults" buttons. Also, slightly rearranged the Display Format tab so that the quick set pop-up is on the left, near the items it affects. Moved the "use comma-separated format for bulk data" checkbox over as well, since it's part of the set.
2021-10-14 22:10:32 +00:00
<Grid DockPanel.Dock="Top" Height="240" Margin="4,0">
Remove "high" versions of string pseudo-ops High ASCII and other encodings will be noted in the operand field, not the opcode, so we no longer need these. This removes the six input fields from the Pseudo-Op tab of app settings. Values were stored as a serialized class in settings, which generally works correctly as far as forward/backward compatibility goes, so no worries there. This also adds four "delimiter pattern" fields to the Code View tab, allowing the user to customize how encoded strings are marked up for the code list. The values aren't actually used yet. Also, fixed an issue where changes to text fields on the Pseudo-Op tab weren't raising the dirty flag.
2019-08-11 23:22:16 +00:00
Add "quick set" menu to delimiter settings tab Added a pop-up menu with three options: default (curly quotes), straight, and Merlin. Removed the "reset to defaults" buttons. Also, slightly rearranged the Display Format tab so that the quick set pop-up is on the left, near the items it affects. Moved the "use comma-separated format for bulk data" checkbox over as well, since it's part of the set.
2021-10-14 22:10:32 +00:00
<Grid.Resources>
<!-- TextBox spacer -->
<Thickness x:Key="TBS" Left="2" Top="4" Right="0" Bottom="0"/>
<Thickness x:Key="ENC" Left="0" Top="3" Right="4" Bottom="3"/>
</Grid.Resources>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="*"/>
<ColumnDefinition Width="*"/>
</Grid.ColumnDefinitions>
<Grid.RowDefinitions>
<RowDefinition Height="Auto"/>
<RowDefinition Height="Auto"/>
<RowDefinition Height="Auto"/>
<RowDefinition Height="*"/>
</Grid.RowDefinitions>
Remove "high" versions of string pseudo-ops High ASCII and other encodings will be noted in the operand field, not the opcode, so we no longer need these. This removes the six input fields from the Pseudo-Op tab of app settings. Values were stored as a serialized class in settings, which generally works correctly as far as forward/backward compatibility goes, so no worries there. This also adds four "delimiter pattern" fields to the Code View tab, allowing the user to customize how encoded strings are marked up for the code list. The values aren't actually used yet. Also, fixed an issue where changes to text fields on the Pseudo-Op tab weren't raising the dirty flag.
2019-08-11 23:22:16 +00:00
Add "quick set" menu to delimiter settings tab Added a pop-up menu with three options: default (curly quotes), straight, and Merlin. Removed the "reset to defaults" buttons. Also, slightly rearranged the Display Format tab so that the quick set pop-up is on the left, near the items it affects. Moved the "use comma-separated format for bulk data" checkbox over as well, since it's part of the set.
2021-10-14 22:10:32 +00:00
<GroupBox Grid.Column="0" Grid.Row="1" Header="Character Operand Delimiters" Margin="4"
Padding="2,4">
<StackPanel>
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="Auto"/>
<ColumnDefinition Width="Auto"/>
<ColumnDefinition Width="Auto"/>
<ColumnDefinition Width="Auto"/>
<ColumnDefinition Width="Auto"/>
</Grid.ColumnDefinitions>
<Grid.RowDefinitions>
<RowDefinition Height="Auto"/>
<RowDefinition Height="Auto"/>
<RowDefinition Height="Auto"/>
<RowDefinition Height="Auto"/>
<RowDefinition Height="Auto"/>
</Grid.RowDefinitions>
<!-- decorative lines to set off row/column headers -->
<Rectangle Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="5"
VerticalAlignment="Bottom" Height="1"
Stroke="LightGray" Fill="Transparent"/>
<Rectangle Grid.Column="0" Grid.Row="0" Grid.RowSpan="5"
HorizontalAlignment="Right" Width="1"
Stroke="LightGray" Fill="Transparent"/>
<TextBlock Grid.Column="0" Grid.Row="0" Text="Encoding" Margin="0,2,0,3"/>
<TextBlock Grid.Column="1" Grid.Row="0" Text="Prefix" Margin="3,2,3,0"
HorizontalAlignment="Center"/>
<TextBlock Grid.Column="2" Grid.Row="0" Text="Open" Margin="3,2,3,0"
HorizontalAlignment="Center"/>
<TextBlock Grid.Column="3" Grid.Row="0" Text="Close" Margin="3,2,3,0"
HorizontalAlignment="Center"/>
<TextBlock Grid.Column="4" Grid.Row="0" Text="Suffix" Margin="3,2,3,0"
HorizontalAlignment="Center"/>
<TextBlock Text="Plain ASCII" Grid.Column="0" Grid.Row="1"
Margin="{StaticResource ENC}"/>
<TextBox Name="chrdAsciiPrefix" Grid.Column="1" Grid.Row="1"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="8"
Text="01234567"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="chrdAsciiOpen" Grid.Column="2" Grid.Row="1"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="chrdAsciiClose" Grid.Column="3" Grid.Row="1"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="chrdAsciiSuffix" Grid.Column="4" Grid.Row="1"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="12"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBlock Text="High ASCII" Grid.Column="0" Grid.Row="2"
Margin="{StaticResource ENC}"/>
<TextBox Name="chrdHighAsciiPrefix" Grid.Column="1" Grid.Row="2"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="8"
Text="01234567"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="chrdHighAsciiOpen" Grid.Column="2" Grid.Row="2"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="chrdHighAsciiClose" Grid.Column="3" Grid.Row="2"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="chrdHighAsciiSuffix" Grid.Column="4" Grid.Row="2"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="12"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBlock Text="C64 PETSCII" Grid.Column="0" Grid.Row="3"
Margin="{StaticResource ENC}"/>
<TextBox Name="chrdPetsciiPrefix" Grid.Column="1" Grid.Row="3"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="8"
Text="01234567"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="chrdPetsciiOpen" Grid.Column="2" Grid.Row="3"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="chrdPetsciiClose" Grid.Column="3" Grid.Row="3"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="chrdPetsciiSuffix" Grid.Column="4" Grid.Row="3"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="12"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBlock Text="C64 Screen Code" Grid.Column="0" Grid.Row="4"
Margin="{StaticResource ENC}"/>
<TextBox Name="chrdScreenCodePrefix" Grid.Column="1" Grid.Row="4"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="8"
Text="01234567"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="chrdScreenCodeOpen" Grid.Column="2" Grid.Row="4"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="chrdScreenCodeClose" Grid.Column="3" Grid.Row="4"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="chrdScreenCodeSuffix" Grid.Column="4" Grid.Row="4"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="12"
FontFamily="{StaticResource GeneralMonoFont}"/>
</Grid>
</StackPanel>
</GroupBox>
Define and use "delimiter sets" A delimiter definition is four strings (prefix, open, close, suffix) that are concatenated with the character or string data to form an operand. A delimiter set is a collection of delimiter definitions, with separate entries for each character encoding. This is a convenient way to configure Formatter objects, import and export data from the app settings file, and manage the UI needed to allow the user to customize how things look. The full set of options didn't fit on the first app settings tab, so there's now a separate tab just for specifying character and string delimiters. (This might be overkill, but there are various plausible scenarios that make use of it.) The delimiters for on-screen display of strings can now be configured.
2019-08-14 22:25:09 +00:00
Add "quick set" menu to delimiter settings tab Added a pop-up menu with three options: default (curly quotes), straight, and Merlin. Removed the "reset to defaults" buttons. Also, slightly rearranged the Display Format tab so that the quick set pop-up is on the left, near the items it affects. Moved the "use comma-separated format for bulk data" checkbox over as well, since it's part of the set.
2021-10-14 22:10:32 +00:00
<GroupBox Grid.Column="1" Grid.Row="1" Header="Text String Delimiters" Margin="4"
Padding="2,4">
<StackPanel>
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="Auto"/>
<ColumnDefinition Width="Auto"/>
<ColumnDefinition Width="Auto"/>
<ColumnDefinition Width="Auto"/>
<ColumnDefinition Width="Auto"/>
</Grid.ColumnDefinitions>
<Grid.RowDefinitions>
<RowDefinition Height="Auto"/>
<RowDefinition Height="Auto"/>
<RowDefinition Height="Auto"/>
<RowDefinition Height="Auto"/>
<RowDefinition Height="Auto"/>
</Grid.RowDefinitions>
<!-- decorative lines to set off row/column headers -->
<Rectangle Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="5"
VerticalAlignment="Bottom" Height="1"
Stroke="LightGray" Fill="Transparent"/>
<Rectangle Grid.Column="0" Grid.Row="0" Grid.RowSpan="5"
HorizontalAlignment="Right" Width="1"
Stroke="LightGray" Fill="Transparent"/>
<TextBlock Grid.Column="0" Grid.Row="0" Text="Encoding" Margin="0,2,0,3"/>
<TextBlock Grid.Column="1" Grid.Row="0" Text="Prefix" Margin="3,2,3,0"
HorizontalAlignment="Center"/>
<TextBlock Grid.Column="2" Grid.Row="0" Text="Open" Margin="3,2,3,0"
HorizontalAlignment="Center"/>
<TextBlock Grid.Column="3" Grid.Row="0" Text="Close" Margin="3,2,3,0"
HorizontalAlignment="Center"/>
<TextBlock Visibility="Hidden" Grid.Column="4" Grid.Row="0" Text="Suffix" Margin="3,2,3,0"
HorizontalAlignment="Center"/>
<TextBlock Text="Plain ASCII" Grid.Column="0" Grid.Row="1"
Margin="{StaticResource ENC}"/>
<TextBox Name="strdAsciiPrefix" Grid.Column="1" Grid.Row="1"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="8"
Text="01234567"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="strdAsciiOpen" Grid.Column="2" Grid.Row="1"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="strdAsciiClose" Grid.Column="3" Grid.Row="1"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Visibility="Hidden" Name="strdAsciiSuffix" Grid.Column="4" Grid.Row="1"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="12"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBlock Text="High ASCII" Grid.Column="0" Grid.Row="2"
Margin="{StaticResource ENC}"/>
<TextBox Name="strdHighAsciiPrefix" Grid.Column="1" Grid.Row="2"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="8"
Text="01234567"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="strdHighAsciiOpen" Grid.Column="2" Grid.Row="2"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="strdHighAsciiClose" Grid.Column="3" Grid.Row="2"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Visibility="Hidden" Name="strdHighAsciiSuffix" Grid.Column="4" Grid.Row="2"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="12"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBlock Text="C64 PETSCII" Grid.Column="0" Grid.Row="3"
Margin="{StaticResource ENC}"/>
<TextBox Name="strdPetsciiPrefix" Grid.Column="1" Grid.Row="3"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="8"
Text="01234567"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="strdPetsciiOpen" Grid.Column="2" Grid.Row="3"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="strdPetsciiClose" Grid.Column="3" Grid.Row="3"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Visibility="Hidden" Name="strdPetsciiSuffix" Grid.Column="4" Grid.Row="3"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="12"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBlock Text="C64 Screen Code" Grid.Column="0" Grid.Row="4"
Margin="{StaticResource ENC}"/>
<TextBox Name="strdScreenCodePrefix" Grid.Column="1" Grid.Row="4"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="8"
Text="01234567"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="strdScreenCodeOpen" Grid.Column="2" Grid.Row="4"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Name="strdScreenCodeClose" Grid.Column="3" Grid.Row="4"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="20" MaxLength="1"
FontFamily="{StaticResource GeneralMonoFont}"/>
<TextBox Visibility="Hidden" Name="strdScreenCodeSuffix" Grid.Column="4" Grid.Row="4"
HorizontalAlignment="Center" VerticalAlignment="Top"
Margin="{StaticResource TBS}" Width="65" MaxLength="12"
FontFamily="{StaticResource GeneralMonoFont}"/>
</Grid>
</StackPanel>
</GroupBox>
Define and use "delimiter sets" A delimiter definition is four strings (prefix, open, close, suffix) that are concatenated with the character or string data to form an operand. A delimiter set is a collection of delimiter definitions, with separate entries for each character encoding. This is a convenient way to configure Formatter objects, import and export data from the app settings file, and manage the UI needed to allow the user to customize how things look. The full set of options didn't fit on the first app settings tab, so there's now a separate tab just for specifying character and string delimiters. (This might be overkill, but there are various plausible scenarios that make use of it.) The delimiters for on-screen display of strings can now be configured.
2019-08-14 22:25:09 +00:00
Add "quick set" menu to delimiter settings tab Added a pop-up menu with three options: default (curly quotes), straight, and Merlin. Removed the "reset to defaults" buttons. Also, slightly rearranged the Display Format tab so that the quick set pop-up is on the left, near the items it affects. Moved the "use comma-separated format for bulk data" checkbox over as well, since it's part of the set.
2021-10-14 22:10:32 +00:00
<GroupBox Grid.Column="0" Grid.Row="2" Header="Sample Characters" Margin="4"
Padding="2,4">
<StackPanel>
<TextBox IsReadOnly="True"
Text="&#x2018;&#x2019;&#x2022;&#x201c;&#x201d;&#x2191;&#xab;&#xbb;&#x2770;&#x2771;"
FontFamily="{StaticResource GeneralMonoFont}" FontSize="16"/>
</StackPanel>
</GroupBox>
</Grid>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
Add "quick set" menu to delimiter settings tab Added a pop-up menu with three options: default (curly quotes), straight, and Merlin. Removed the "reset to defaults" buttons. Also, slightly rearranged the Display Format tab so that the quick set pop-up is on the left, near the items it affects. Moved the "use comma-separated format for bulk data" checkbox over as well, since it's part of the set.
2021-10-14 22:10:32 +00:00
<GroupBox DockPanel.Dock="Bottom" Header="Quick Set"
HorizontalAlignment="Left" Padding="2,4">
<ComboBox Name="textDelimQuickComboBox" Width="170" IsReadOnly="True"
ItemsSource="{Binding DelimPresets}" DisplayMemberPath="Name"
SelectionChanged="TextDelimQuickComboBox_SelectionChanged"/>
Define and use "delimiter sets" A delimiter definition is four strings (prefix, open, close, suffix) that are concatenated with the character or string data to form an operand. A delimiter set is a collection of delimiter definitions, with separate entries for each character encoding. This is a convenient way to configure Formatter objects, import and export data from the app settings file, and manage the UI needed to allow the user to customize how things look. The full set of options didn't fit on the first app settings tab, so there's now a separate tab just for specifying character and string delimiters. (This might be overkill, but there are various plausible scenarios that make use of it.) The delimiters for on-screen display of strings can now be configured.
2019-08-14 22:25:09 +00:00
</GroupBox>
Add "quick set" menu to delimiter settings tab Added a pop-up menu with three options: default (curly quotes), straight, and Merlin. Removed the "reset to defaults" buttons. Also, slightly rearranged the Display Format tab so that the quick set pop-up is on the left, near the items it affects. Moved the "use comma-separated format for bulk data" checkbox over as well, since it's part of the set.
2021-10-14 22:10:32 +00:00
</DockPanel>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
</TabItem>
Implemented the first ("Code View") tab of settings Notable items include the column show/hide buttons, which were straightforward except for the "determine the default width" part, and the font picker, which is no longer a standard dialog. The latter was complicated by the absence of a good way to detect whether a font is mono-spaced or not without calling back into code meant for WinForms font manipulation (with a dash of PInvoke). Yay WPF. Also, enabled character ellipsis for code list items.
2019-06-27 00:11:58 +00:00
<TabItem Name="displayFormatTab" Header="Display Format">
Make operand wrap length configurable Long operands, such as strings and bulk data, can span multiple lines. SourceGen wraps them at 64 characters, which is fine for assembly output but occasionally annoying on screen: if the operand column is wide enough to show the entire value, the comment column is pushed pretty far to the right. This change makes the width configurable, as 32/48/64 characters, with a pop-up in app settings. The assemblers are all wired to 64 characters, though we could make this configurable as well with an assembler-specific setting. Some things have moved around a bit in app settings. The Asm Config tab now comes last. Having it sandwiched in the middle of tabs that altered the on-screen display didn't make much sense. The Display Format is now explicitly for opcodes and operands, and is split into two columns. The left column is managed by the "quick set" feature, the right column is independent.
2020-07-20 01:39:27 +00:00
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="*"/>
<ColumnDefinition Width="Auto"/>
<ColumnDefinition Width="*"/>
</Grid.ColumnDefinitions>
<Grid.RowDefinitions>
<RowDefinition Height="Auto"/>
<RowDefinition Height="*"/>
</Grid.RowDefinitions>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
Make operand wrap length configurable Long operands, such as strings and bulk data, can span multiple lines. SourceGen wraps them at 64 characters, which is fine for assembly output but occasionally annoying on screen: if the operand column is wide enough to show the entire value, the comment column is pushed pretty far to the right. This change makes the width configurable, as 32/48/64 characters, with a pop-up in app settings. The assemblers are all wired to 64 characters, though we could make this configurable as well with an assembler-specific setting. Some things have moved around a bit in app settings. The Asm Config tab now comes last. Having it sandwiched in the middle of tabs that altered the on-screen display didn't make much sense. The Display Format is now explicitly for opcodes and operands, and is split into two columns. The left column is managed by the "quick set" feature, the right column is independent.
2020-07-20 01:39:27 +00:00
<TextBlock Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="3" Margin="4,0,0,0"
Text="Configure opcode/operand display format options. This does not affect source code generation."/>
<DockPanel Grid.Column="0" Grid.Row="1" LastChildFill="False">
<GroupBox Header="Operand Width Disambiguator" Width="300" DockPanel.Dock="Top"
HorizontalAlignment="Left" Margin="0,8,0,0" Padding="2,0">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="*"/>
<ColumnDefinition Width="*"/>
<ColumnDefinition Width="20"/>
<ColumnDefinition Width="*"/>
<ColumnDefinition Width="*"/>
</Grid.ColumnDefinitions>
<Grid.RowDefinitions>
<RowDefinition Height="Auto"/>
<RowDefinition Height="Auto"/>
<RowDefinition Height="Auto"/>
</Grid.RowDefinitions>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
Make operand wrap length configurable Long operands, such as strings and bulk data, can span multiple lines. SourceGen wraps them at 64 characters, which is fine for assembly output but occasionally annoying on screen: if the operand column is wide enough to show the entire value, the comment column is pushed pretty far to the right. This change makes the width configurable, as 32/48/64 characters, with a pop-up in app settings. The assemblers are all wired to 64 characters, though we could make this configurable as well with an assembler-specific setting. Some things have moved around a bit in app settings. The Asm Config tab now comes last. Having it sandwiched in the middle of tabs that altered the on-screen display didn't make much sense. The Display Format is now explicitly for opcodes and operands, and is split into two columns. The left column is managed by the "quick set" feature, the right column is independent.
2020-07-20 01:39:27 +00:00
<TextBlock Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2"
Text="Opcode suffix:" Margin="0,4,0,0"/>
<TextBlock Grid.Column="3" Grid.Row="0" Grid.ColumnSpan="2"
Text="Operand prefix:" Margin="0,4,0,0"/>
<TextBlock Grid.Column="0" Grid.Row="1" Text="16-bit:"
Margin="0,4,0,0"/>
<TextBox Grid.Column="1" Grid.Row="1" Margin="0,4,0,0" MaxLength="8"
FontFamily="{StaticResource GeneralMonoFont}"
Text="{Binding OpcodeSuffixAbs, UpdateSourceTrigger=PropertyChanged,
FallbackValue=.placeho}"/>
<TextBlock Grid.Column="3" Grid.Row="1" Text="16-bit:"
Margin="0,4,0,0"/>
<TextBox Grid.Column="4" Grid.Row="1" Margin="0,4,0,0" MaxLength="8"
FontFamily="{StaticResource GeneralMonoFont}"
Text="{Binding OperandPrefixAbs, UpdateSourceTrigger=PropertyChanged,
FallbackValue=.placeho}"/>
<TextBlock Grid.Column="0" Grid.Row="2" Text="24-bit:"
Margin="0,4,0,0"/>
<TextBox Grid.Column="1" Grid.Row="2" Margin="0,4,0,0" MaxLength="8"
FontFamily="{StaticResource GeneralMonoFont}"
Text="{Binding OpcodeSuffixLong, UpdateSourceTrigger=PropertyChanged,
FallbackValue=.placeho}"/>
<TextBlock Grid.Column="3" Grid.Row="2" Text="24-bit:"
Margin="0,4,0,0"/>
<TextBox Grid.Column="4" Grid.Row="2" Margin="0,4,0,0" MaxLength="8"
FontFamily="{StaticResource GeneralMonoFont}"
Text="{Binding OperandPrefixLong, UpdateSourceTrigger=PropertyChanged,
FallbackValue=.placeho}"/>
</Grid>
</GroupBox>
<StackPanel DockPanel.Dock="Top" Orientation="Horizontal" Margin="4,8,0,0">
<TextBlock Text="Expression style:" Margin="0,3,0,0"/>
<ComboBox Name="expressionStyleComboBox" Width="120" Margin="8,0,0,0"
ItemsSource="{Binding ExpressionStyleItems}" DisplayMemberPath="Name"
IsReadOnly="True"
SelectionChanged="ExpressionStyleComboBox_SelectionChanged"/>
</StackPanel>
Label rework, part 2 Continue development of non-unique labels. The actual labels are still unique, because we append a uniquifier tag, which gets added and removed behind the scenes. We're currently using the six-digit hex file offset because this is only used for internal address symbols. The label editor and most of the formatters have been updated. We can't yet assemble code that includes non-unique labels, but older stuff hasn't been broken. This removes the "disable label localization" property, since that's fundamentally incompatible with what we're doing, and adds a non- unique label prefix setting so you can put '@' or ':' in front of your should-be-local labels. Also, fixed a field name typo.
2019-11-13 01:24:41 +00:00
Make operand wrap length configurable Long operands, such as strings and bulk data, can span multiple lines. SourceGen wraps them at 64 characters, which is fine for assembly output but occasionally annoying on screen: if the operand column is wide enough to show the entire value, the comment column is pushed pretty far to the right. This change makes the width configurable, as 32/48/64 characters, with a pop-up in app settings. The assemblers are all wired to 64 characters, though we could make this configurable as well with an assembler-specific setting. Some things have moved around a bit in app settings. The Asm Config tab now comes last. Having it sandwiched in the middle of tabs that altered the on-screen display didn't make much sense. The Display Format is now explicitly for opcodes and operands, and is split into two columns. The left column is managed by the "quick set" feature, the right column is independent.
2020-07-20 01:39:27 +00:00
<StackPanel DockPanel.Dock="Top" Orientation="Horizontal" Margin="4,8,0,0">
<TextBlock Text="Non-unique label prefix:"/>
<TextBox Width="14" MaxLength="1" Margin="8,1,0,0"
Text="{Binding NonUniqueLabelPrefix, UpdateSourceTrigger=PropertyChanged,
FallbackValue=@}"
FontFamily="{StaticResource GeneralMonoFont}"/>
</StackPanel>
Make local variable prefix configurable for display It's kind of handy to have variable labels tagged. This makes it configurable. The quick-set for Merlin sets it to "]", all others leave it blank.
2019-08-31 21:54:44 +00:00
Make operand wrap length configurable Long operands, such as strings and bulk data, can span multiple lines. SourceGen wraps them at 64 characters, which is fine for assembly output but occasionally annoying on screen: if the operand column is wide enough to show the entire value, the comment column is pushed pretty far to the right. This change makes the width configurable, as 32/48/64 characters, with a pop-up in app settings. The assemblers are all wired to 64 characters, though we could make this configurable as well with an assembler-specific setting. Some things have moved around a bit in app settings. The Asm Config tab now comes last. Having it sandwiched in the middle of tabs that altered the on-screen display didn't make much sense. The Display Format is now explicitly for opcodes and operands, and is split into two columns. The left column is managed by the "quick set" feature, the right column is independent.
2020-07-20 01:39:27 +00:00
<StackPanel DockPanel.Dock="Top" Orientation="Horizontal" Margin="4,4,0,0">
<TextBlock Text="Local variable prefix:"/>
<TextBox Width="66" MaxLength="8" Margin="8,1,0,0"
Text="{Binding LocalVarPrefix, UpdateSourceTrigger=PropertyChanged,
FallbackValue=.placeho}"
FontFamily="{StaticResource GeneralMonoFont}"/>
</StackPanel>
Two changes to "dense hex" bulk data formatting (1) Added an option to limit the number of bytes per line. This is handy for things like bitmaps, where you might want to put (say) 3 or 8 bytes per line to reflect the structure. (2) Added an application setting that determines whether the screen listing shows Merlin/ACME dense hex (20edfd) or 64tass/cc65 hex bytes ($20,$ed,$fd). Made the setting part of the assembler-driven display definitions. Updated 64tass+cc65 to use ".byte" as their dense hex pseudo-op, and to use the updated formatter code. No changes to regression test output. (Changes were requested in issue #42.) Also, added a resize gripper to the bottom-right corner of the main window. (These seem to have generally fallen out of favor, but I like having it there.)
2019-12-11 01:41:00 +00:00
Add "quick set" menu to delimiter settings tab Added a pop-up menu with three options: default (curly quotes), straight, and Merlin. Removed the "reset to defaults" buttons. Also, slightly rearranged the Display Format tab so that the quick set pop-up is on the left, near the items it affects. Moved the "use comma-separated format for bulk data" checkbox over as well, since it's part of the set.
2021-10-14 22:10:32 +00:00
<CheckBox DockPanel.Dock="Top" Margin="4,8,0,0"
Content="Use comma-separated format for bulk data"
IsChecked="{Binding CommaSeparatedBulkData}"/>
Make operand wrap length configurable Long operands, such as strings and bulk data, can span multiple lines. SourceGen wraps them at 64 characters, which is fine for assembly output but occasionally annoying on screen: if the operand column is wide enough to show the entire value, the comment column is pushed pretty far to the right. This change makes the width configurable, as 32/48/64 characters, with a pop-up in app settings. The assemblers are all wired to 64 characters, though we could make this configurable as well with an assembler-specific setting. Some things have moved around a bit in app settings. The Asm Config tab now comes last. Having it sandwiched in the middle of tabs that altered the on-screen display didn't make much sense. The Display Format is now explicitly for opcodes and operands, and is split into two columns. The left column is managed by the "quick set" feature, the right column is independent.
2020-07-20 01:39:27 +00:00
<GroupBox DockPanel.Dock="Bottom" Header="Quick Set"
HorizontalAlignment="Left" Padding="2,4">
Add "quick set" menu to delimiter settings tab Added a pop-up menu with three options: default (curly quotes), straight, and Merlin. Removed the "reset to defaults" buttons. Also, slightly rearranged the Display Format tab so that the quick set pop-up is on the left, near the items it affects. Moved the "use comma-separated format for bulk data" checkbox over as well, since it's part of the set.
2021-10-14 22:10:32 +00:00
<ComboBox Name="displayFmtQuickComboBox" Width="170" IsReadOnly="True"
Make operand wrap length configurable Long operands, such as strings and bulk data, can span multiple lines. SourceGen wraps them at 64 characters, which is fine for assembly output but occasionally annoying on screen: if the operand column is wide enough to show the entire value, the comment column is pushed pretty far to the right. This change makes the width configurable, as 32/48/64 characters, with a pop-up in app settings. The assemblers are all wired to 64 characters, though we could make this configurable as well with an assembler-specific setting. Some things have moved around a bit in app settings. The Asm Config tab now comes last. Having it sandwiched in the middle of tabs that altered the on-screen display didn't make much sense. The Display Format is now explicitly for opcodes and operands, and is split into two columns. The left column is managed by the "quick set" feature, the right column is independent.
2020-07-20 01:39:27 +00:00
ItemsSource="{Binding DisplayPresets}" DisplayMemberPath="Name"
SelectionChanged="DisplayFmtQuickComboBox_SelectionChanged"/>
</GroupBox>
</DockPanel>
<Rectangle Grid.Column="1" Grid.Row="1" Margin="0,8,0,0"
VerticalAlignment="Stretch" Fill="LightGray" Width="2"/>
<DockPanel Grid.Column="2" Grid.Row="1" LastChildFill="False">
<CheckBox DockPanel.Dock="Top" Margin="4,12,0,0"
Split "show cycle counts" in two The "show cycle counts in comments" setting is the only one that affects both the on-screen display and generated source code. This felt a little weird, so it's now two independent settings. This also provided an opportunity to move it to the initial tab, so it's easier to toggle on and off. Overall it feels less confusing to have two settings for essentially the same thing, because code generation is distinct from everything else. The "spaces between bytes" setting was moved to the Display Format tab, which seems a better fit. Documentation and tutorial have been updated. Also did a little bit of cleanup in EditAppSettings.
2020-08-27 20:13:58 +00:00
Content="Add spaces in Bytes column"
IsChecked="{Binding SpacesBetweenBytes}"/>
Make operand wrap length configurable Long operands, such as strings and bulk data, can span multiple lines. SourceGen wraps them at 64 characters, which is fine for assembly output but occasionally annoying on screen: if the operand column is wide enough to show the entire value, the comment column is pushed pretty far to the right. This change makes the width configurable, as 32/48/64 characters, with a pop-up in app settings. The assemblers are all wired to 64 characters, though we could make this configurable as well with an assembler-specific setting. Some things have moved around a bit in app settings. The Asm Config tab now comes last. Having it sandwiched in the middle of tabs that altered the on-screen display didn't make much sense. The Display Format is now explicitly for opcodes and operands, and is split into two columns. The left column is managed by the "quick set" feature, the right column is independent.
2020-07-20 01:39:27 +00:00
<StackPanel DockPanel.Dock="Top" Orientation="Horizontal" Margin="4,8,0,0">
<TextBlock Text="Wrap operands at" Margin="0,3,0,0"/>
<ComboBox Name="operandWrapLenComboBox" Width="45" Margin="4,0,0,0"
ItemsSource="{Binding OperandWrapLenItems}" IsReadOnly="True"
SelectionChanged="OperandWrapLenComboBox_SelectionChanged"/>
<TextBlock Text="characters" Margin="4,3,0,0"/>
</StackPanel>
</DockPanel>
</Grid>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
</TabItem>
Implemented the first ("Code View") tab of settings Notable items include the column show/hide buttons, which were straightforward except for the "determine the default width" part, and the font picker, which is no longer a standard dialog. The latter was complicated by the absence of a good way to detect whether a font is mono-spaced or not without calling back into code meant for WinForms font manipulation (with a dash of PInvoke). Yay WPF. Also, enabled character ellipsis for code list items.
2019-06-27 00:11:58 +00:00
<TabItem Name="pseudoOpTab" Header="Pseudo-Op">
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
<DockPanel LastChildFill="False">
Implemented the first ("Code View") tab of settings Notable items include the column show/hide buttons, which were straightforward except for the "determine the default width" part, and the font picker, which is no longer a standard dialog. The latter was complicated by the absence of a good way to detect whether a font is mono-spaced or not without calling back into code meant for WinForms font manipulation (with a dash of PInvoke). Yay WPF. Also, enabled character ellipsis for code list items.
2019-06-27 00:11:58 +00:00
<TextBlock DockPanel.Dock="Top" Margin="4,0,0,0"
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
Text="Select pseudo-op names for display. This does not affect source code generation. Blank entries get a default value."/>
Implemented the first ("Code View") tab of settings Notable items include the column show/hide buttons, which were straightforward except for the "determine the default width" part, and the font picker, which is no longer a standard dialog. The latter was complicated by the absence of a good way to detect whether a font is mono-spaced or not without calling back into code meant for WinForms font manipulation (with a dash of PInvoke). Yay WPF. Also, enabled character ellipsis for code list items.
2019-06-27 00:11:58 +00:00
<Grid DockPanel.Dock="Top" Height="240" Margin="4,0">
Remove "high" versions of string pseudo-ops High ASCII and other encodings will be noted in the operand field, not the opcode, so we no longer need these. This removes the six input fields from the Pseudo-Op tab of app settings. Values were stored as a serialized class in settings, which generally works correctly as far as forward/backward compatibility goes, so no worries there. This also adds four "delimiter pattern" fields to the Code View tab, allowing the user to customize how encoded strings are marked up for the code list. The values aren't actually used yet. Also, fixed an issue where changes to text fields on the Pseudo-Op tab weren't raising the dirty flag.
2019-08-11 23:22:16 +00:00
<Grid.Resources>
<!-- TextBox spacer -->
<Thickness x:Key="TBS" Left="6" Top="0" Right="0" Bottom="0"/>
</Grid.Resources>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
<Grid.ColumnDefinitions>
<ColumnDefinition Width="*"/>
<ColumnDefinition Width="0.8*"/>
<ColumnDefinition Width="*"/>
<ColumnDefinition Width="0.8*"/>
<ColumnDefinition Width="*"/>
<ColumnDefinition Width="0.8*"/>
<ColumnDefinition Width="*"/>
<ColumnDefinition Width="0.8*"/>
</Grid.ColumnDefinitions>
<Grid.RowDefinitions>
<RowDefinition Height="*"/>
<RowDefinition Height="*"/>
<RowDefinition Height="*"/>
<RowDefinition Height="*"/>
<RowDefinition Height="*"/>
<RowDefinition Height="*"/>
Add junk/align directives Sometimes there's a bunch of junk in the binary that isn't used for anything. Often it's there to make things line up at the start of a page boundary. This adds a ".junk" directive that tells the disassembler that it can safely disregard the contents of a region. If the region ends on a power-of-two boundary, an alignment value can be specified. The assembly source generators will output an alignment directive when possible, a .fill directive when appropriate, and a .dense directive when all else fails. Because we're required to regenerate the original data file, it's not always possible to avoid generating a hex dump.
2019-10-19 03:28:02 +00:00
<RowDefinition Height="*"/>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
</Grid.RowDefinitions>
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
<!-- first row -->
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
<TextBlock Grid.Column="0" Grid.Row="0" Text="Equate:"
HorizontalAlignment="Right" VerticalAlignment="Center"/>
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
<TextBox Name="equDirectiveTextBox" Grid.Column="1" Grid.Row="0"
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
<TextBlock Grid.Column="2" Grid.Row="0" Text="Variable:"
HorizontalAlignment="Right" VerticalAlignment="Center"/>
<TextBox Name="varDirectiveTextBox" Grid.Column="3" Grid.Row="0"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBlock Grid.Column="4" Grid.Row="0" Text="Reg width:"
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
HorizontalAlignment="Right" VerticalAlignment="Center"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="regWidthDirectiveTextBox" Grid.Column="5" Grid.Row="0"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<!-- second row -->
<StackPanel Grid.Column="0" Grid.Row="1" VerticalAlignment="Center">
<TextBlock Text="Address range" HorizontalAlignment="Right"/>
<TextBlock Text="start:" HorizontalAlignment="Right"/>
</StackPanel>
<TextBox Name="arStartDirectiveTextBox" Grid.Column="1" Grid.Row="1"
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Text=".placeho" MaxLength="12"
FontFamily="{StaticResource GeneralMonoFont}"/>
<StackPanel Grid.Column="2" Grid.Row="1" VerticalAlignment="Center">
<TextBlock Text="Address range" HorizontalAlignment="Right"/>
<TextBlock Text="end:" HorizontalAlignment="Right"/>
</StackPanel>
<TextBox Name="arEndDirectiveTextBox" Grid.Column="3" Grid.Row="1"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<!-- third row -->
<StackPanel Grid.Column="0" Grid.Row="2" VerticalAlignment="Center">
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
<TextBlock Text="Little-endian" HorizontalAlignment="Right"/>
<TextBlock Text="data, one byte:" HorizontalAlignment="Right"/>
</StackPanel>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="defineData1TextBox" Grid.Column="1" Grid.Row="2"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBlock Grid.Column="2" Grid.Row="2" Text="Two bytes:"
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
HorizontalAlignment="Right" VerticalAlignment="Center"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="defineData2TextBox" Grid.Column="3" Grid.Row="2"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBlock Grid.Column="4" Grid.Row="2" Text="Three bytes:"
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
HorizontalAlignment="Right" VerticalAlignment="Center"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="defineData3TextBox" Grid.Column="5" Grid.Row="2"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBlock Grid.Column="6" Grid.Row="2" Text="Four bytes:"
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
HorizontalAlignment="Right" VerticalAlignment="Center"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="defineData4TextBox" Grid.Column="7" Grid.Row="2"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<!-- fourth row -->
<StackPanel Grid.Column="2" Grid.Row="3" VerticalAlignment="Center">
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
<TextBlock Text="Big-endian data," HorizontalAlignment="Right"/>
<TextBlock Text="two bytes:" HorizontalAlignment="Right"/>
</StackPanel>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="defineBigData2TextBox" Grid.Column="3" Grid.Row="3"
Add junk/align directives Sometimes there's a bunch of junk in the binary that isn't used for anything. Often it's there to make things line up at the start of a page boundary. This adds a ".junk" directive that tells the disassembler that it can safely disregard the contents of a region. If the region ends on a power-of-two boundary, an alignment value can be specified. The assembly source generators will output an alignment directive when possible, a .fill directive when appropriate, and a .dense directive when all else fails. Because we're required to regenerate the original data file, it's not always possible to avoid generating a hex dump.
2019-10-19 03:28:02 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Text=".placeho" MaxLength="12"
FontFamily="{StaticResource GeneralMonoFont}"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBlock Grid.Column="6" Grid.Row="3" Text="Bulk data:"
Add junk/align directives Sometimes there's a bunch of junk in the binary that isn't used for anything. Often it's there to make things line up at the start of a page boundary. This adds a ".junk" directive that tells the disassembler that it can safely disregard the contents of a region. If the region ends on a power-of-two boundary, an alignment value can be specified. The assembly source generators will output an alignment directive when possible, a .fill directive when appropriate, and a .dense directive when all else fails. Because we're required to regenerate the original data file, it's not always possible to avoid generating a hex dump.
2019-10-19 03:28:02 +00:00
HorizontalAlignment="Right" VerticalAlignment="Center"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="denseTextBox" Grid.Column="7" Grid.Row="3"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<!-- fifth row -->
<TextBlock Grid.Column="0" Grid.Row="4" Text="Fill:"
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
HorizontalAlignment="Right" VerticalAlignment="Center"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="fillTextBox" Grid.Column="1" Grid.Row="4"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
Add "uninitialized data" format type This allows regions that hold variable storage to be marked as data that is initialized by the program before it is used. Previously the choices were to treat it as bulk data (initialized) or junk (totally unused), neither of which are correct. This is functionally equivalent to "junk" as far as source code generation is concerned (though it doesn't have to be). For the code/data/junk counter, uninitialized data is counted as junk, because it technically does not need to be part of the binary.
2021-10-13 21:48:05 +00:00
<TextBlock Grid.Column="2" Grid.Row="4" Text="Uninitialized:"
HorizontalAlignment="Right" VerticalAlignment="Center"/>
<TextBox Name="uninitTextBox" Grid.Column="3" Grid.Row="4"
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Text=".placeho" MaxLength="12"
FontFamily="{StaticResource GeneralMonoFont}"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBlock Grid.Column="4" Grid.Row="4" Text="Junk:"
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
HorizontalAlignment="Right" VerticalAlignment="Center"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="junkTextBox" Grid.Column="5" Grid.Row="4"
Add junk/align directives Sometimes there's a bunch of junk in the binary that isn't used for anything. Often it's there to make things line up at the start of a page boundary. This adds a ".junk" directive that tells the disassembler that it can safely disregard the contents of a region. If the region ends on a power-of-two boundary, an alignment value can be specified. The assembly source generators will output an alignment directive when possible, a .fill directive when appropriate, and a .dense directive when all else fails. Because we're required to regenerate the original data file, it's not always possible to avoid generating a hex dump.
2019-10-19 03:28:02 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Text=".placeho" MaxLength="12"
FontFamily="{StaticResource GeneralMonoFont}"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBlock Grid.Column="6" Grid.Row="4" Text="Align:"
Add junk/align directives Sometimes there's a bunch of junk in the binary that isn't used for anything. Often it's there to make things line up at the start of a page boundary. This adds a ".junk" directive that tells the disassembler that it can safely disregard the contents of a region. If the region ends on a power-of-two boundary, an alignment value can be specified. The assembly source generators will output an alignment directive when possible, a .fill directive when appropriate, and a .dense directive when all else fails. Because we're required to regenerate the original data file, it's not always possible to avoid generating a hex dump.
2019-10-19 03:28:02 +00:00
HorizontalAlignment="Right" VerticalAlignment="Center"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="alignTextBox" Grid.Column="7" Grid.Row="4"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<!-- sixth row -->
<TextBlock Grid.Column="0" Grid.Row="5" Text="Generic str:"
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
HorizontalAlignment="Right" VerticalAlignment="Center"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="strGenericTextBox" Grid.Column="1" Grid.Row="5"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBlock Grid.Column="2" Grid.Row="5" Text="Reverse str:"
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
HorizontalAlignment="Right" VerticalAlignment="Center"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="strReverseTextBox" Grid.Column="3" Grid.Row="5"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBlock Grid.Column="4" Grid.Row="5" Text="Null-term str:"
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
HorizontalAlignment="Right" VerticalAlignment="Center"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="strNullTermTextBox" Grid.Column="5" Grid.Row="5"
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Text=".placeho" MaxLength="12"
FontFamily="{StaticResource GeneralMonoFont}"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBlock Grid.Column="6" Grid.Row="5" Text="DCI str:"
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
HorizontalAlignment="Right" VerticalAlignment="Center"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="strDciTextBox" Grid.Column="7" Grid.Row="5"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<!-- seventh row -->
<TextBlock Grid.Column="0" Grid.Row="6" Text="1-byte len str:"
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
HorizontalAlignment="Right" VerticalAlignment="Center"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="strLen8TextBox" Grid.Column="1" Grid.Row="6"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBlock Grid.Column="2" Grid.Row="6" Text="2-byte len str:"
Add VarDirective to PseudoOpNames Also, rearranged the pseudo-op app settings XAML to be a bit easier to maintain.
2019-08-29 19:14:47 +00:00
HorizontalAlignment="Right" VerticalAlignment="Center"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="strLen16TextBox" Grid.Column="3" Grid.Row="6"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Various improvements The PseudoOpNames class is increasingly being used in situations where mutability is undesirable. This change makes instances immutable, eliminating the Copy() method and adding a constructor that takes a Dictionary. The serialization code now operates on a Dictionary instead of the class properties, but the JSON encoding is identical, so this doesn't invalidate app settings file data. Added an equality test to PseudoOpNames. In LineListGen, don't reset the line list if the names haven't actually changed. Use a table lookup for C64 character conversions. I figure that should be faster than multiple conditionals on a modern x64 system. Fixed a 64tass generator issue where we tried to query project properties in a call that might not have a project available (specifically, getting FormatConfig values out of the generator for use in the "quick set" buttons for Display Format). Fixed a regression test harness issue where, if the assembler reported success but didn't actually generate output, an exception would be thrown that halted the tests. Increased the width of text entry fields on the Pseudo-Op tab of app settings. The previous 8-character limit wasn't wide enough to hold ACME's "!pseudopc". Also, use TrimEnd() to remove trailing spaces (leading spaces are still allowed). In the last couple of months, Win10 started stalling for a fraction of a second when executing assemblers. It doesn't do this every time; mostly it happens if it has been a while since the assembler was run. My guess is this has to do with changes to the built-in malware scanner. Whatever the case, we now change the mouse pointer to a wait cursor while updating the assembler version cache.
2019-08-17 18:14:05 +00:00
Text=".placeho" MaxLength="12"
Implement fourth settings tab ("Pseudo-Op") Largely unchanged from WinForms version. Creating and binding properties for every field seemed tedious.
2019-06-30 20:52:42 +00:00
FontFamily="{StaticResource GeneralMonoFont}"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBlock Grid.Column="6" Grid.Row="6" Text="Data bank:"
Data Bank Register management, part 3 Added a "fake" assembler pseudo-op for DBR changes. Display entries in line list. Added entry to double-click handler so that you can double-click on a PLB instruction operand to open the data bank editor.
2020-07-09 22:17:47 +00:00
HorizontalAlignment="Right" VerticalAlignment="Center"/>
ORG rework, part 3 Split ".org" into ".arstart" and ".arend" (address range start/end). Address range ends are now shown in the code list view, and the pseudo-op can be edited in app settings. Address range starts are now shown after notes and long comments, rather than before, which brings the on-screen display in sync with generated code. Reworked the address range editor UI to include the new features. The implementation is fully broken. More changes to the AddressMap API, putting the resolved region length into a separate ActualLength field. Added FindRegion(). Renamed some things. Code generation changed slightly: the blank line before a region-end line now comes after it, and ACME's "} ;!pseudopc" is now just "}". This required minor updates to some of the regression test results.
2021-09-22 21:39:39 +00:00
<TextBox Name="dataBankTextBox" Grid.Column="7" Grid.Row="6"
Data Bank Register management, part 3 Added a "fake" assembler pseudo-op for DBR changes. Display entries in line list. Added entry to double-click handler so that you can double-click on a PLB instruction operand to open the data bank editor.
2020-07-09 22:17:47 +00:00
VerticalAlignment="Center" Margin="{StaticResource TBS}"
Text=".placeho" MaxLength="12"
FontFamily="{StaticResource GeneralMonoFont}"/>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
</Grid>
<GroupBox DockPanel.Dock="Bottom" Header="Quick Set"
Add "quick set" menu to delimiter settings tab Added a pop-up menu with three options: default (curly quotes), straight, and Merlin. Removed the "reset to defaults" buttons. Also, slightly rearranged the Display Format tab so that the quick set pop-up is on the left, near the items it affects. Moved the "use comma-separated format for bulk data" checkbox over as well, since it's part of the set.
2021-10-14 22:10:32 +00:00
HorizontalAlignment="Left" Padding="2,4">
<ComboBox Name="pseudoOpQuickComboBox" Width="170" IsReadOnly="True"
Change how the "quick set" settings work The last two tabs in the Edit App Settings dialog have "quick set" buttons configure all fields for a particular assembler, or reset them to default values. The previous UI was a little annoying, because you had to pick something from the combo box and then hit "set" to push the change. It was also confusing, because if you came back later the combo box was just set to the first entry, not the thing you picked last. Now, picking an entry from the combo box immediately updates all fields. The combo box selection is set to reflect the actual contents (so if you set everything just right, the combo box will change to a specific assembler). If nothing matches, a special entry labeled "Custom" is selected. Also, rearranged the tutorial sections in the manual so the address table formatting comes last, and appears in the local TOC.
2019-10-12 00:39:52 +00:00
ItemsSource="{Binding PseudoOpPresets}" DisplayMemberPath="Name"
SelectionChanged="PseudoOpQuickComboBox_SelectionChanged"/>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
</GroupBox>
</DockPanel>
</TabItem>
Make operand wrap length configurable Long operands, such as strings and bulk data, can span multiple lines. SourceGen wraps them at 64 characters, which is fine for assembly output but occasionally annoying on screen: if the operand column is wide enough to show the entire value, the comment column is pushed pretty far to the right. This change makes the width configurable, as 32/48/64 characters, with a pop-up in app settings. The assemblers are all wired to 64 characters, though we could make this configurable as well with an assembler-specific setting. Some things have moved around a bit in app settings. The Asm Config tab now comes last. Having it sandwiched in the middle of tabs that altered the on-screen display didn't make much sense. The Display Format is now explicitly for opcodes and operands, and is split into two columns. The left column is managed by the "quick set" feature, the right column is independent.
2020-07-20 01:39:27 +00:00
<TabItem Name="asmConfigTab" Header="Asm Config">
<StackPanel>
<GroupBox Header="Assembler Configuration" Padding="2,4">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="Auto"/>
<ColumnDefinition Width="*"/>
</Grid.ColumnDefinitions>
<Grid.RowDefinitions>
<RowDefinition/>
<RowDefinition/>
<RowDefinition/>
</Grid.RowDefinitions>
<TextBlock Grid.Column="0" Grid.Row="0" Text="Assembler:"
HorizontalAlignment="Right" Margin="0,5,4,0"/>
<ComboBox Name="asmConfigComboBox" Grid.Column="1" Grid.Row="0" IsReadOnly="True"
Width="150" HorizontalAlignment="Left" Margin="0,4,0,20"
ItemsSource="{Binding AssemblerList}" DisplayMemberPath="Name"
SelectionChanged="AsmConfigComboBox_SelectionChanged"/>
<TextBlock Grid.Column="0" Grid.Row="1" Text="Executable:"
HorizontalAlignment="Right" Margin="0,0,4,0"/>
<DockPanel Grid.Column="1" Grid.Row="1">
<Button DockPanel.Dock="Right" Content="Browse..." Width="75"
Margin="8,0,0,8" Click="AsmExeBrowseButton_Click"/>
<TextBox Name="asmExePathTextBox" DockPanel.Dock="Left" Margin="0,0,0,8"
Text="C:\something" TextChanged="AsmExePathTextBox_TextChanged"/>
</DockPanel>
<TextBlock Grid.Column="0" Grid.Row="2" Text="Column widths:"
HorizontalAlignment="Right" Margin="0,0,4,0"/>
<StackPanel Grid.Column="1" Grid.Row="2" Orientation="Horizontal">
<TextBox Name="asmLabelColWidthTextBox" Width="60" Margin="0,0,4,0">
<TextBox.Text>
<Binding Path="AsmLabelColWidth" UpdateSourceTrigger="PropertyChanged">
<Binding.ValidationRules>
<local:AsmColWidthRule ValidatesOnTargetUpdated="True"/>
</Binding.ValidationRules>
</Binding>
</TextBox.Text>
</TextBox>
<TextBox Name="asmOpcodeColWidthTextBox" Width="60" Margin="0,0,4,0">
<TextBox.Text>
<Binding Path="AsmOpcodeColWidth" UpdateSourceTrigger="PropertyChanged">
<Binding.ValidationRules>
<local:AsmColWidthRule ValidatesOnTargetUpdated="True"/>
</Binding.ValidationRules>
</Binding>
</TextBox.Text>
</TextBox>
<TextBox Name="asmOperandColWidthTextBox" Width="60" Margin="0,0,4,0">
<TextBox.Text>
<Binding Path="AsmOperandColWidth" UpdateSourceTrigger="PropertyChanged">
<Binding.ValidationRules>
<local:AsmColWidthRule ValidatesOnTargetUpdated="True"/>
</Binding.ValidationRules>
</Binding>
</TextBox.Text>
</TextBox>
<TextBox Name="asmCommentColWidthTextBox" Width="60" Margin="0,0,8,0">
<TextBox.Text>
<Binding Path="AsmCommentColWidth" UpdateSourceTrigger="PropertyChanged">
<Binding.ValidationRules>
<local:AsmColWidthRule ValidatesOnTargetUpdated="True"/>
</Binding.ValidationRules>
</Binding>
</TextBox.Text>
</TextBox>
<TextBlock Text="(label, opcode, operand, comment)"/>
</StackPanel>
</Grid>
</GroupBox>
<TextBlock Text="General code generation:" Margin="4,16,0,0"/>
Split "show cycle counts" in two The "show cycle counts in comments" setting is the only one that affects both the on-screen display and generated source code. This felt a little weird, so it's now two independent settings. This also provided an opportunity to move it to the initial tab, so it's easier to toggle on and off. Overall it feels less confusing to have two settings for essentially the same thing, because code generation is distinct from everything else. The "spaces between bytes" setting was moved to the Display Format tab, which seems a better fit. Documentation and tutorial have been updated. Also did a little bit of cleanup in EditAppSettings.
2020-08-27 20:13:58 +00:00
<CheckBox Content="Show cycle counts in comments" Margin="4,8,0,0"
IsChecked="{Binding ShowCycleCountsAsm}"/>
Make operand wrap length configurable Long operands, such as strings and bulk data, can span multiple lines. SourceGen wraps them at 64 characters, which is fine for assembly output but occasionally annoying on screen: if the operand column is wide enough to show the entire value, the comment column is pushed pretty far to the right. This change makes the width configurable, as 32/48/64 characters, with a pop-up in app settings. The assemblers are all wired to 64 characters, though we could make this configurable as well with an assembler-specific setting. Some things have moved around a bit in app settings. The Asm Config tab now comes last. Having it sandwiched in the middle of tabs that altered the on-screen display didn't make much sense. The Display Format is now explicitly for opcodes and operands, and is split into two columns. The left column is managed by the "quick set" feature, the right column is independent.
2020-07-20 01:39:27 +00:00
<CheckBox Content="Put long labels on separate line" Margin="4,8,0,0"
IsChecked="{Binding LongLabelNewLine}"/>
<CheckBox Content="Identify assembler in output" Margin="4,8,0,0"
IsChecked="{Binding AddIdentComment}"/>
</StackPanel>
</TabItem>
Layout for app settings Multi-tab dialog with tons of controls. Also, fixed WorkProgress owner, and removed debug delay from source gen dialog.
2019-06-24 22:48:11 +00:00
</TabControl>
</DockPanel>
</Window>
Reference in New Issue Copy Permalink