Altered the address region edit UI a little to improve clarity.
Also, close the hex dump viewer window when Escape is hit. (The
tool windows don't have "cancel" buttons, so the key has to be
handled explicitly.)
The initial screen is largely blank, with just the four large buttons
for new/open/recent1/recent2. It now also has a "tip of the day" box,
with text and an optional image.
The tips and images are kept in the RuntimeData directory. They're
small enough that they could have been baked into the binary, but
there's enough other stuff going on there that it didn't seem
necessary. Also, if the tips annoy you, removing the tips file will
hide the tip UI.
The index of the tip shown is based on the day of the year, modulo
the number of defined tips. So it will be different every day (with
a bit of hand-waving at the end of the year).
This action removes operand formatting from all code and data in the
selected range. In most cases this is equivalent to simply editing
the various items and clicking the "default" format radio button,
but the feature can be used to remove data formats that end up inside
multi-byte instructions. Instructions with such formats cause warnings
and were tricky to fix.
Labels embedded in multi-byte items are also tricky to remove, so this
clears those as well. It does not remove visible labels. This is
done in a single pass, which means that labels that would become visible
after the formatting is cleared will still be removed.
Also, fix inclusion of address range end lines when restoring the
selection. Their peculiar nature -- being associated with the offset
of the last byte of multi-byte items -- was interfering with the
selection save code. This does not add them to the selection when
an address region deletion is undone, since technically they weren't
part of the selection.
Also, moved Edit Note higher in the Actions menu.
Implemented address region pre-labels. These are useful if the code is
relocating a block from address A to address B, because the code that
does the copying refers to both the "before" address and the "after"
address. Previously you'd give the block the "after" address and the
"before" would just appears as hex, because it's effectively an
external address.
Pre-labels are shown on screen with their address, but no other fields.
Showing the address makes it easy to see the label's value, which isn't
always obvious right before a .arstart. The labels are suppressed if the
address value evaluates to non-addressable.
This defines a new type of symbol, which is external and always global
in scope. Pre-labels affect label localization and must go through
the usual remapping to handle clashes with opcode mnemonics and the
use of leading underscores. Cross-references are computed, but are
associated with the file offset rather than the label line itself.
Added a new filter to the Symbols window ("PreL").
Implemented label input and checking in the address editor. Generally
added highlighting of relevant error labels.
Implemented "is relative" flag. This only affects source code
generation, replacing ".arstart <addr>" with ".arstart *+<value>".
Only output by 64tass and ACME generators.
Added a bold-text summary to radio buttons in address region edit
dialog. This makes it much easier to see what you're doing. Added
a warning to the label edit dialog when a label is being placed in
a non-addressable region.
Modified double-click behavior for .arstart/.arend to jump to the
other end when the opcode is clicked on. This matches the behavior
of instructions with address operands.
Reordered Actions menu, putting "edit operand" at the top.
Fixed AddressMap entry collision testing.
Fixed PRG issue with multiple address regions at offset +000002.
Added regression tests. Most of the complicated stuff with regions
is tested by unit tests inside AddressMap, but we still need to
exercise nested region code generation.
Updated project file format to save the new map entries.
Tweaked appearance of .arend directives to show the .arstart address
in the operand field. This makes it easier to match them up on screen.
Also, add a synthetic comment on auto-generated .arstart entries.
Added .arstart/.arend to the things that respond to Jump to Operand
(Ctrl+J). Selecting one jumps to the other end. (Well, it jumps
to the code nearest the other, which will do for now.)
Added a menu item to display a text rendering of the address map.
Helpful when things get complicated.
Modified the linear map iterator to return .arend items with the offset
of the last byte in the region, rather than the first byte of the
following region. While the "exclusive end" approach is pretty
common, it caused problems when updating the line list, because it
meant that the .arend directives were outside the range of offsets
being updated (and, for directives at the end of the file, outside
the file itself). This was painful to deal with for partial updates.
Changing this required some relatively subtle changes and annoyed some
of the debug assertions, such as the one where all Line items have
offsets that match the start of a line, but it's the cleaner approach.
This is another attempt to fix the ListView keyboard position
behavior. Basic problem: if you change something in the ListView,
the keyboard position is lost, and WPF doesn't expose a nice way to
save and restore it. It appears the way to set the position is by
calling Focus() on the specific item you want to have as the "current"
keyboard position, but you can only do that at certain times.
This attempt removes the grid-splitter resize hack, in favor of just
setting a "needs refocus" flag when we restore the selection set.
This causes Focus() to be called from the StatusChanged callback on
the next event with status="containers generated".
During testing I noticed some other odd behavior: if you used "goto"
to jump to an address, up/down arrows would change focus to a
different control (menu items, grid splitters, etc). The problem
there was that we were setting focus to the ListView control rather
than to a ListViewItem, so arrow keys were in control-traversal mode
rather than list-walk mode. That is also fixed.
(Issue #105)
Variables, types, and comments have been updated to reflect the new
naming scheme.
The project file serialization code is untouched, because the data
is output as serialized enumerated values. Adding a string conversion
layer didn't seem worthwhile.
No changes in behavior.
(issue #89)
Before:
Hint As Code Entry Point
Hint As Data Start
Hint As Inline Data
Remove Hints
After:
Tag Address As Code Start Point
Tag Address As Code Stop Point
Tag Bytes As Inline Data
Remove Analyzer Tags
The goal is to reduce confusion. The old nomenclature was causing
problems because it's inaccurate -- they're directives, not hints --
and made it look like you need to mark data items explicitly. The
new action names emphasize the idea that you should be tagging a
single address for start/stop, not blanketing a region.
This change updates the user interface, manual, and tutorials, but
does not change how the items are referred to in code, and does not
change how the program works.
(issue #89)
Sometimes you just want to turn cycle counts on for a bit, and going
through app settings is tiresome. Now there's a toolbar checkbox
for it. The icon isn't ideal, but it'll do.
This experimental feature applied platform symbols to the project,
setting labels where the platform symbol's address matched an internal
address. The feature now applies project symbols as well, and has
been renamed to "apply external symbols".
We now report the number of labels set.
Another chapter in the never-ending AppDomain security saga.
If a computer goes to sleep while SourceGen is running with a project
open, life gets confusing when the system wakes up. The keep-alive
timer fires and a ping is sent to the remote AppDomain, successfully.
At the same time, the lease expires on the remote side, and the objects
are discarded (apparently without bothering to query the ILease object).
This failure mode is 100% repeatable.
Since we can't prevent sandbox objects from disappearing, we have to
detect and recover from the problem. Fortunately we don't keep any
necessary state on the plugin side, so we can just tear the whole
thing down and recreate it.
The various methods in ScriptManager now do a "health check" before
making calls into the plugin AppDomain. If the ping attempt fails,
the AppDomain is "rebooted" by destroying it and creating a new one,
reloading all plugins that were in there before. The plugin binaries
*should* still be in the PluginDllCache directory since the ping failure
was due to objects being discarded, not AppDomain shutdown, and Windows
doesn't let you mess with files that hold executable code.
A new "reboot security sandbox" option has been added to the DEBUG
menu to facilitate testing.
The PluginManager's Ping() method gets called more often, but not to
the extent that performance will be affected.
This change also adds a finalizer to DisasmProject, since we're relying
on it to shut down the ScriptManager, and it's relying on callers to
invoke its cleanup function. The finalizer throws an assertion if the
cleanup function doesn't get called.
(Issue #82)
Changed "Use Keep-Alive Hack" to "Disable Keep-Alive Hack" to emphasize
that it defaults to enabled. Added a menu item for "Disable Security
Sandbox". Added a warning to both that tells the user that they must
reopen the current project for the change to take effect.
Note neither of these is persisted in app settings.
This is still an "experimental" feature, but it's getting expanded
a bit. The implementation now lives in its own class. An "export"
feature that generates SGEC data has been added. The file extension
has been changed from ".sgec" to ".txt" to make it simpler to edit
under Windows.
On the 65816, 16-bit data access instructions (e.g. LDA abs) are
expanded to 24 bits by merging in the Data Bank Register (B). The
value of the register is difficult to determine via static analysis,
so we need a way to annotate the disassembly with the correct value.
Without this, the mapping of address to file offset will sometimes
be incorrect.
This change adds the basic data structures and "fixup" function, a
functional but incomplete editor, and source for a new test case.
If you double-click on the opcode of an instruction whose operand is
an address or equate, the selection jumps to that address. This
feature is now available in the Navigate menu, with the keyboard
shortcut Ctrl+J.
While testing the feature I noticed that the keyboard focus wasn't
following the selection, so if you jumped to an address and then
used the up/down arrows, you jumped back to the previous location.
(This was true when double-clicking an opcode to jump; it was just
less noticeable since the next action was likely mouse-based.) This
has been fixed by updating the ListView item focus when we jump to a
new location.
See also issue #63 and issue #72.
SourceGen Edit Commands is a feature that allows you to generate
commands into a file and have SourceGen apply them to the current
project. I'm not expecting this to be used by anyone but me, so
for now I'm just adding an entry to the debug menu that can read
comments out of a file.
Also, fixed a bug in the re-centering min/max code that prevented
it from working on trivial shapes.
Also, renamed the atari-avg visualizer to atari-avg-bz, with the
expectation that one day somebody might want to create a variant
for newer games.
- Freeze Note brushes, so HTML export doesn't blow up when it tries
to access them.
- Add Ctrl+Shift+E as keyboard shortcut for File > Export.
- For code/data percentage, count inline data as data.
- Tweak code/data percentage text.
- Document Merlin32 '{' bug.
- Tweak tutorial text.
Added some more plumbing. Updated visualization set edit dialog,
which now does word-wrapping correctly in the buttons. Added Alt+V
as the hotkey for Create/Edit Visualization Set, which allows you
to double-tap it to leap into the visualization editor.
Experimented with Path drawing, which looks like it could do just
what we need.
Also, show the file size in KB in the code/data/junk breakdown at the
bottom of the window. (Technically it's KiB, but that looked funny.)
The tool allows you to cut a piece out of a file by specifying an
offset and a length. A pair of hex dumps helps you verify that the
positions are correct.
Also, minor cleanups elsewhere.
(1) Added an option to limit the number of bytes per line. This is
handy for things like bitmaps, where you might want to put (say) 3
or 8 bytes per line to reflect the structure.
(2) Added an application setting that determines whether the screen
listing shows Merlin/ACME dense hex (20edfd) or 64tass/cc65 hex bytes
($20,$ed,$fd). Made the setting part of the assembler-driven display
definitions. Updated 64tass+cc65 to use ".byte" as their dense hex
pseudo-op, and to use the updated formatter code. No changes to
regression test output.
(Changes were requested in issue #42.)
Also, added a resize gripper to the bottom-right corner of the main
window. (These seem to have generally fallen out of favor, but I
like having it there.)
- Show the full path in the tooltip for the two "recent project"
buttons shown on the launch panel.
- Reset the app title bar and status bar contents when the project
is closed.
Correct handling of local variables. We now correctly uniquify them
with regard to non-unique labels. Because local vars can effectively
have global scope we mostly want to treat them as global, but they're
uniquified relative to other globals very late in the process, so we
can't just throw them in the symbol table and be done. Fortunately
local variables exist in a separate namespace, so we just need to
uniquify the variables relative to the post-localization symbol table.
In other words, we take the symbol table, apply the label map, and
rename any variable that clashes.
This also fixes an older problem where we weren't masking the
leading '_' on variable labels when generating 64tass output.
The code list now makes non-unique labels obvious, but you can't tell
the difference between unique global and unique local. What's more,
the default type value in Edit Label is now adjusted to Global for
unique locals that were auto-generated. To make it a bit easier to
figure out what's what, the Info panel now has a "label type" line
that reports the type.
The 2023-non-unique-labels test had some additional tests added to
exercise conflicts with local variables. The 2019-local-variables
test output changed slightly because the de-duplicated variable
naming convention was simplified.
Added serialization of non-unique labels to project files.
The address labels are stored without the non-unique tag, because we
can get that from the file offset. (If we stored it, we'd need to
extract the value and verify that it matches the offset.) Operand
weak references are symbolic, and so do include the tag string.
We weren't validating symbol labels before. Now we are.
This also adds a "NonU" filter to the Symbols window so the labels
can be shown or hidden as desired.
Also, added source for a first pass at a regression test.
Jumps to the first offset associated with the change at the top of
the Undo stack. We generally jump to the code/data offset, not the
specific line affected. It's possible to do better (and we do, for
Notes), but probably not worthwhile.
As noted in issue #52, the side panels can't be resized once the
ListView gets focus. The root of the problem is a workaround for a
selection problem that involves catching the Item Container
Generator's Status Changed event, and setting an item's focus. It
appears that changing the size of the ListView causes the
StatusChanged event to fire, which cause the handler to grab the
focus, which causes the splitters to stop moving after one step.
This change adds a workaround that prevents the original workaround
from doing anything while a splitter is in the process of being
dragged. It doesn't solve all problems -- you can't move the
splitters more than one step with the keyboard -- but it allows them
to be dragged around with the mouse.
There's got to be a better way to deal with this.
If we detect a problem that requires intervention during loading,
e.g. we find unknown elements because we're loading a file created
by a newer version, default to read-only mode.
Read only mode (1) refuses to apply changes, (2) refuses to add
changes to the undo/redo list, and (3) disables Save/SaveAs. The
mode is indicated in the title bar.
Also, flipped the order of items in the title bar so that "6502bench
SourceGen" comes last. This allows you to read the project name in
short window title snippets. (Visual Studio, Notepad, and others
do it this way as well.)
Not a huge improvement, but things are slightly more organized, and
there's a splash of color in the form of a border around the text
describing the format of code and data lines.
Added an "IsConstant" property to Symbol.
Mark the "info" window as read-only.
When the project closes, clear the contents of the Symbols and
Notes windows.
Clarify some Apple II I/O definitions.
This adds a window that displays all of the instructions for a
given CPU in a summary grid. Undocumented instructions are
included, but shown in grey italics.
Also, tweaked AppSettings to not mark itself as dirty if a "set"
operation doesn't actually change anything.
Implemented show/hide mechanic, using a button on the right side of
the status bar to show status and to trigger un-hide.
Also, show I/O direction in project symbols editor list.
This converts the "problem list viewer" tool to a grid that appears
below the code list view when non-empty. Not all messages are
problems, so it's being renamed to "message list".
Created a Navigate menu, and put the menu items for Find and Go To
in it. Added menu items for nav-forward and nav-backward, which
until now were only available as toolbar buttons.
Most of SourceGen uses standard WPF controls, which get their default
style from the system theme. The main disassembly list uses a
custom style, and always looks like the Windows default theme.
Some people greatly prefer white text on a black background, so we
now provide a way to get that. This also requires muting the colors
used for Notes, since those were chosen to contrast with black text.
This does not affect anything other than the ListView used for
code, because everything else can be set through the Windows
"personalization" interface. We might want to change the way the
Notes window looks though, to avoid having glowing bookmarks on
the side.
The Find box now has forward/backward radio buttons. Find Next
searches forward, and Find Previous searches backward, regardless
of the direction of the initial search.
The standard key sequence for "find previous" is Shift+F3. The WPF
ListView has some weird logic that does something like: if you hit
a key, and the selection changes, and the shift key was held down,
then you must have meant to select a range. So Shift+F3 often (but
not always) selects a range. I think this might be fixable if I can
figure out how ListView keeps track of the current keyboard
navigation position (which is not the same as the selection). For
now I'm working around the problem by using Ctrl+F3 to search.
Yay WPF.
We were changing the control template for lines with long comments
and notes, matching the default Win10 style. This got ugly when a
non-default theme was being used, particularly "dark" themes,
because the long-comment lines looked significantly different from
everything else.
We now fully specify the style for the ListView and ListViewItems,
which means everybody's main window now looks like the default Win10
style. Which is unfortunate, but significantly easier than creating
a full set of theme-specific styles.
We now specify black text for highlighted address/label fields,
because they otherwise become illegible when we apply our background
highlight color. In the Notes window, we set the background of
un-highlighted entries to white, so that we can always read it with
black text.
Addresses issue #50.
Added a Width column to the list in the project symbol editor.
Changed the local variable table editor and the project symbol editor
to use DataGrid instead of ListView. This gets us easy sorting on
arbitrary columns. The previous code was reloading the display list
after every change; now we just add/edit/remove individual items,
which helps keep the list position and selection stable.
