On the 65816, if you say "JSR foo" from bank $12, but "foo" is an
address in bank 0, most assemblers will conclude that you're forming
a 16-bit argument with a 16-bit address and assemble happily. 64tass
halts with an error. Up until v1.55 or so, you could fake it out
by supplying a large offset.
This no longer works. The preferred way to say "no really I mean to
do this" is to append ",k" to the operand. We now do that as needed.
I didn't want to define a new ExpressionMode for 64tass just to
support an operand modifier that should probably never actually get
generated (you can't call across banks with JSR!), so this is
implemented with a quirk and an op flag.
64tass v1.56.2625 is now the default.
(issue #104)
Two things changed: (1) string literals can now hold backslash
escapes like "\n"; (2) MVN/MVP operands can now be prefixed with '#'.
The former was a breaking change because any string with "\" must
be changed to "\\". This is now handled by the string operand
formatter.
Also, improved test harness output. Show the assembler versions at
the end, and include assembler failure messages in the collected
output.
Code generated by one of the C compilers sets up the stack frame and
then maps the direct page on top of it. If the value at the top of
the stack is 16 bits, it will be referenced via address $ff. The
local variable editor was regarding this as illegal, because lvars are
currently only defined for direct page data, and the value doesn't
entirely fit there (unless you're doing an indirect JMP on an NMOS
6502, in which case it wraps around to $00... but let's ignore that).
The actual max width of a local variable is 257 because of the
possibility of a 16-bit access at $ff.
Older versions of SourceGen don't seem to have an issue when they
encounter this situation, as worrying about (start+width) is really
just an editor affectation. The access itself is still a direct-page
operation. You won't be able to edit the entry without reducing the
length, but otherwise everything works. I don't think there's a need
to bump the file version.
Replaced the link at the top of the manual. Remove reference to
old tutorial doc. Added an obsolescence notice to the top of the
old tutorial. Updated tutorial message and link in README.
Also, fixed sidenav style.
A few tweaks:
- Test now requires an ORG on offset +000002, not just a correct
address.
- Suppress on-screen display of the initial ORG directive when
a PRG file is detected. Subtle, but helpful.
- In new project setup, fix initial address for PRG projects that
load at $0000.
- In new project setup, add a "load address" comment to the first line.
Also, fix some out-of-date documentation.
(issue #90)
C64 PRG files are pretty common. Their salient feature is that they
start with a 16-bit value that is used as the load address. The
value is commonly generated by the assembler itself, rather than
explicitly added to the source file.
Not all assemblers know what a PRG file is, and some of them handle
it in ways that are difficult to guarantee in SourceGen. ACME adds
the 16-bit header when the output file name ends in ".prg", cc65
uses a modified config file, 64tass uses a different command-line
option, and Merlin 32 has no idea what they are.
This change adds PRG file detection and handling to the 64tass code
generator. Doing so required making a few changes to the gen/asm
interfaces, because we now need to have the generator pass additional
flags to the assembler, and sometimes we need code generation to
start somewhere other than offset zero. Overall the changes were
pretty minor.
The 20042-address-changes test needed a 6502-only variant. A new test
(20040-address-changes) has been added and given a PRG header. As
part of this change the 65816 variant was changed to use addresses
in bank 2, which uncovered a code generation bug that this change
also fixes.
The 64tass --long-address flag doesn't appear to be necessary for
files <= 65536 bytes long, so we no longer emit it for those.
(issue #90)
Before:
Hint As Code Entry Point
Hint As Data Start
Hint As Inline Data
Remove Hints
After:
Tag Address As Code Start Point
Tag Address As Code Stop Point
Tag Bytes As Inline Data
Remove Analyzer Tags
The goal is to reduce confusion. The old nomenclature was causing
problems because it's inaccurate -- they're directives, not hints --
and made it look like you need to mark data items explicitly. The
new action names emphasize the idea that you should be tagging a
single address for start/stop, not blanketing a region.
This change updates the user interface, manual, and tutorials, but
does not change how the items are referred to in code, and does not
change how the program works.
(issue #89)
Modified the asm source generators and on-screen display to show the
DP arg for BBR/BBS as hex. The instructions are otherwise treated
as relative branches, e.g. the DP arg doesn't get factored into the
cross-reference table.
ACME/cc65 put the bit number in the mnemonic, 64tass wants it to be
in the first argument, and Merlin32 wants nothing to do with any of
this because it's incompatible with the 65816.
Added an "all ops" test for W65C02.
We were claiming W65C02S, but it turns out that CPU has the Rockwell
extensions and the STP/WAI instructions. We need to change existing
references to be "WDC 65C02", and add a new CPU definition for the
actual W65C02S chip.
This adds the new CPU definition, the instruction definitions for
the Rockwell extensions, and updates the selectors in project properties
and the instruction chart tool.
This change shouldn't affect any existing projects. Still more to do
before W65C02 works though, mostly because the Rockwell instructions
introduced a new two-argument address mode that has to be handled in
various places.
Sometimes you just want to turn cycle counts on for a bit, and going
through app settings is tiresome. Now there's a toolbar checkbox
for it. The icon isn't ideal, but it'll do.
Consider:
LDA $00 loads a value from address $00
LDA $00,X might load from $00, or might not
LDA ($00),Y dereferences $00 as a 16-bit pointer
LDA ($00,X) dereferences a pointer, not necessarily from $00
When perusing the cross-reference list, it's useful to be able to
tell whether an instruction is accessing the location, using it as a
base address, or deferencing it as a pointer. We now show "ptr" in
the list for pointer dereferences. (We already showed "idx" for
indexed accesses.)
The "show cycle counts in comments" setting is the only one that
affects both the on-screen display and generated source code. This
felt a little weird, so it's now two independent settings. This
also provided an opportunity to move it to the initial tab, so it's
easier to toggle on and off. Overall it feels less confusing to have
two settings for essentially the same thing, because code generation
is distinct from everything else.
The "spaces between bytes" setting was moved to the Display Format
tab, which seems a better fit.
Documentation and tutorial have been updated.
Also did a little bit of cleanup in EditAppSettings.
This experimental feature applied platform symbols to the project,
setting labels where the platform symbol's address matched an internal
address. The feature now applies project symbols as well, and has
been renamed to "apply external symbols".
We now report the number of labels set.
First, make the per-segment comments and notes optional.
Second, add an "offset segment by $0100" feature that tries to shift
each segment forward 256 bytes. Doing so avoids potential ambiguity
with direct page locations.
The 20212-reloc-data test no longer has the per-segment comments.
The "smart" PLP handler tries to recover the flags from an earlier
PHP. The non-smart version just marks all the flags as indeterminate.
This doesn't work well on the 65816 in native mode, because having
the M/X flags in an indeterminate state is rarely what you want.
Code rarely uses PLP to reset the flags to a specific state, preferring
explicit SEP/REP. The analyzer is more likely to get the correct
answer by simply leaving the flags in their prior state.
A test case has been added to 20052-branches-and-banks, which now has
"smart PLP" disabled.
Long operands, such as strings and bulk data, can span multiple lines.
SourceGen wraps them at 64 characters, which is fine for assembly
output but occasionally annoying on screen: if the operand column is
wide enough to show the entire value, the comment column is pushed
pretty far to the right.
This change makes the width configurable, as 32/48/64 characters,
with a pop-up in app settings.
The assemblers are all wired to 64 characters, though we could make
this configurable as well with an assembler-specific setting.
Some things have moved around a bit in app settings. The Asm Config
tab now comes last. Having it sandwiched in the middle of tabs that
altered the on-screen display didn't make much sense. The Display
Format is now explicitly for opcodes and operands, and is split into
two columns. The left column is managed by the "quick set" feature,
the right column is independent.
Another chapter in the never-ending AppDomain security saga.
If a computer goes to sleep while SourceGen is running with a project
open, life gets confusing when the system wakes up. The keep-alive
timer fires and a ping is sent to the remote AppDomain, successfully.
At the same time, the lease expires on the remote side, and the objects
are discarded (apparently without bothering to query the ILease object).
This failure mode is 100% repeatable.
Since we can't prevent sandbox objects from disappearing, we have to
detect and recover from the problem. Fortunately we don't keep any
necessary state on the plugin side, so we can just tear the whole
thing down and recreate it.
The various methods in ScriptManager now do a "health check" before
making calls into the plugin AppDomain. If the ping attempt fails,
the AppDomain is "rebooted" by destroying it and creating a new one,
reloading all plugins that were in there before. The plugin binaries
*should* still be in the PluginDllCache directory since the ping failure
was due to objects being discarded, not AppDomain shutdown, and Windows
doesn't let you mess with files that hold executable code.
A new "reboot security sandbox" option has been added to the DEBUG
menu to facilitate testing.
The PluginManager's Ping() method gets called more often, but not to
the extent that performance will be affected.
This change also adds a finalizer to DisasmProject, since we're relying
on it to shut down the ScriptManager, and it's relying on callers to
invoke its cleanup function. The finalizer throws an assertion if the
cleanup function doesn't get called.
(Issue #82)
Changed "Use Keep-Alive Hack" to "Disable Keep-Alive Hack" to emphasize
that it defaults to enabled. Added a menu item for "Disable Security
Sandbox". Added a warning to both that tells the user that they must
reopen the current project for the change to take effect.
Note neither of these is persisted in app settings.
The new name is more indicative of the purpose of the directory.
Updated the docs to point out that you can delete the contents any
time you want, so long as SourceGen isn't running at the time.
Also, change the default column widths for the exporter.
When we have relocation data available, the code currently skips the
process of matching an address with a label for a PEA instruction when
the instruction in question doesn't have reloc data. This does a
great job of separating code that pushes parts of addresses from code
that pushes constants.
This change expands the behavior to exclude instructions with 16-bit
address operands that use the Data Bank Register, e.g. "LDA abs"
and "LDA abs,X". This is particularly useful for code that accesses
structured data using the operand as the structure offset, e.g.
"LDX addr" / "LDA $0000,X"
The 20212-reloc-data test has been updated to check the behavior.
Implemented "smart" PLB handling. If we see PHK/PLB, or 8-bit
LDA imm/PHA/PLB, we create a data bank change item. The feature
can be disabled with a project property.
On the 65816, 16-bit data access instructions (e.g. LDA abs) are
expanded to 24 bits by merging in the Data Bank Register (B). The
value of the register is difficult to determine via static analysis,
so we need a way to annotate the disassembly with the correct value.
Without this, the mapping of address to file offset will sometimes
be incorrect.
This change adds the basic data structures and "fixup" function, a
functional but incomplete editor, and source for a new test case.
The Absolute Indirect and Absolute Indirect Long addressing modes
(e.g. "JMP (addr)" and "JMP [addr]") are 16-bit values in bank 0.
The code analyzer was placing them in the program bank, which
meant the wrong symbol was being used.
Also, tweak some docs.
This was a relatively lightweight change to confirm the usefulness
of relocation data. The results were very positive.
The relatively superficial integration of the data into the data
analysis process causes some problems, e.g. the cross-reference table
entries show an offset because the code analyzer's computed operand
offset doesn't match the value of the label. The feature should be
considered experimental
The feature can be enabled or disabled with a project property. The
results were sufficiently useful and non-annoying to make the setting
enabled by default.
Code generated for 64tass was incorrect for JSR/JMP to a location
outside the file bounds. A test added to 20052-branches-and-banks
revealed an issue with cc65 generation as well.
It's nice to be able to save images from the visualization editor
for display elsewhere. This can be done during HTML export, but
that's inconvenient when you just want one image, and doesn't allow
the output size to be specified.
This change adds an Export button to the Edit Visualization dialog.
The current bitmap, wireframe, or wireframe animation can be saved
to a GIF image. A handful of sizes can be selected from a pop-up
menu.
If you double-click on the opcode of an instruction whose operand is
an address or equate, the selection jumps to that address. This
feature is now available in the Navigate menu, with the keyboard
shortcut Ctrl+J.
While testing the feature I noticed that the keyboard focus wasn't
following the selection, so if you jumped to an address and then
used the up/down arrows, you jumped back to the previous location.
(This was true when double-clicking an opcode to jump; it was just
less noticeable since the next action was likely mouse-based.) This
has been fixed by updating the ListView item focus when we jump to a
new location.
See also issue #63 and issue #72.
Added a visualizer for the CHR ROM pattern tables, and a semi-useful
visualizer for tile grids.
Also added a few chars in an 8x8 font that visualizers can use to
label things.
Sometimes it's useful to know whether an address referenced by a
function is a direct access, or is being used as a base address.
(I'm somewhat undecided on this one, since it clutters up the list
a bit. Giving it a try.)
- Freeze Note brushes, so HTML export doesn't blow up when it tries
to access them.
- Add Ctrl+Shift+E as keyboard shortcut for File > Export.
- For code/data percentage, count inline data as data.
- Tweak code/data percentage text.
- Document Merlin32 '{' bug.
- Tweak tutorial text.
There's no "standard" coordinate system, so the choice is arbitrary.
However, an examination of the Transporter mesh in Elite revealed
that the mesh was designed for a left-handed coordinate system. We
can compensate for that trivially in the Elite visualizer, but we
might as well match what they're doing. (The only change required
in the code is a couple of sign changes on the Z coordinate, and an
update to the rotation matrix.)
This also downsizes Matrix44 to Matrix33, exposes the rotation mode
enum, and adds a left-handed ZYX rotation mode.
This does mean that meshes that put the front at +Z will show their
backsides initially, since we're now oriented as if we're flying
the ships rather than facing them. I considered adding a 180-degree
Y rotation (with a tweak to the rotation matrix handedness to correct
the first rotation axis) to have them facing by default, but figured
that might be confusing since +Z is supposed to be away.
Anybody who really wants it to be the other way can trivially flip
the coordinates in their visualizer (negate xc/zc).
The Z coordinates in the visualization test project were flipped so
that the design is still facing the viewer at rotation (0,0,0).
Also, tweak the perspective projection scaling to fill out the area
a bit more, and change the visualization editor to use the grid's
size when setting the path dimensions.
Also, note gimbal lock.
Added a new category "sprite sheet", which is essentially a more
generalized version of the bitmap font renderer. It has the full
set of options for col/row/cell stride and colors. (Issue #74,
issue #75)
Added a flag that flips the high bits on bitmaps. Sometimes data
is stored with the high bit clear, but the high bit is set as it's
rendered. (Issue #76)
Also, fixed the keyboard shortcuts in the Edit Visualization Set
window, which were 'N' for both "New ___" items. (Issue #57)
Added "show undocumented opcodes" checkbox, so you can choose
whether or not to see them at all. (Issue #60)
Added formatter call for the instruction mnemonics so they get
capitalized when the app is configured for upper-case opcodes.
(Issue #59)
Fix a bug where the instruction chart and ASCII chart were writing
their modes to the same setting, stomping each other.
Also, pluralized a button in the file concatenator.