6502/6502bench
1
0
Fork 0
mirror of https://github.com/fadden/6502bench.git synced 2024-05-31 22:41:37 +00:00
Code Issues Projects Releases Wiki Activity
0d9814d993
6502bench/SourceGen/MainController.cs
Andy McFadden 0d9814d993 Allow explicit widths in project/platform symbols, part 3 
Implement multi-byte project/platform symbols by filling out a table
of addresses.  Each symbol is "painted" into the table, replacing
an existing entry if the new entry has higher priority.  This allows
us to handle overlapping entries, giving boosted priority to platform
symbols that are defined in .sym65 files loaded later.

The bounds on project/platform symbols are now rigidly defined.  If
the "nearby" feature is enabled, references to SYM-1 will be picked
up, but we won't go hunting for SYM+1 unless the symbol is at least
two bytes wide.

The cost of adding a symbol to the symbol table is about the same,
but we don't have a quick way to remove a symbol.

Previously, if two platform symbols had the same value, the symbol
with the alphabetically lowest label would win.  Now, the symbol
defined in the most-recently-loaded file wins.  (If you define two
symbols with the same value in the same file, it's still resolved
alphabetically.)  This allows the user to pick the winner by
arranging the load order of the platform symbol files.

Platform symbols now keep a reference to the file ident of the
symbol file that defined them, so we can show the symbols's source
in the Info panel.

These changes altered the behavior of test 2008-address-changes,
which includes some tests on external addresses that are close to
labeled internal addresses.  The previous behavior essentially
treated user labels as being 3 bytes wide and extending outside the
file bounds, which was mildly convenient on occasion but felt a
little skanky.  (We could do with a way to define external symbols
relative to internal symbols, for things like the source address of
code that gets relocated.)

Also, re-enabled some unit tests.

Also, added a bit of identifying stuff to CrashLog.txt.
2019-10-02 16:50:15 -07:00

3613 lines
153 KiB
C#
Raw Blame History

/*
* Copyright 2019 faddenSoft
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
using System;
using System.Collections.Generic;
using System.Diagnostics;
using System.IO;
using System.Text;
using System.Web.Script.Serialization;
using System.Windows;
using System.Windows.Input;
using Microsoft.Win32;
using Asm65;
using CommonUtil;
using CommonWPF;
using SourceGen.Sandbox;
using SourceGen.WpfGui;
namespace SourceGen {
/// <summary>
/// This class manages user interaction. The goal is for this to be relatively
/// GUI-toolkit-agnostic, with all the WPF stuff tucked into the code-behind files. An
/// instance of this class is created by MainWindow when the app starts.
///
/// There is some Windows-specific stuff, like MessageBox and OpenFileDialog.
/// </summary>
public class MainController {
private const string SETTINGS_FILE_NAME = "SourceGen-settings";
#region Project state
// Currently open project, or null if none.
private DisasmProject mProject;
// Pathname to 65xx data file.
private string mDataPathName;
// Pathname of .dis65 file. This will be empty for a new project.
private string mProjectPathName;
/// <summary>
/// Data backing the code list.
/// </summary>
public LineListGen CodeLineList { get; private set; }
#endregion Project state
/// <summary>
/// Reference back to MainWindow object.
/// </summary>
private MainWindow mMainWin;
/// <summary>
/// Hex dump viewer window. This is used for the currently open project.
/// </summary>
private Tools.WpfGui.HexDumpViewer mHexDumpDialog;
// Debug windows.
private Tools.WpfGui.ShowText mShowAnalysisTimersDialog;
public bool IsDebugAnalysisTimersOpen { get { return mShowAnalysisTimersDialog != null; } }
private Tools.WpfGui.ShowText mShowAnalyzerOutputDialog;
public bool IsDebugAnalyzerOutputOpen { get { return mShowAnalyzerOutputDialog != null; } }
private Tools.WpfGui.ProblemListViewer mShowProblemListDialog;
public bool IsDebugProblemListOpen { get { return mShowProblemListDialog != null; } }
private Tools.WpfGui.ShowText mShowUndoRedoHistoryDialog;
public bool IsDebugUndoRedoHistoryOpen { get { return mShowUndoRedoHistoryDialog != null; } }
/// <summary>
/// This holds any un-owned Windows that we don't otherwise track. It's used for
/// hex dump windows of arbitrary files. We need to close them when the main window
/// is closed.
/// </summary>
private List<Window> mUnownedWindows = new List<Window>();
/// <summary>
/// ASCII chart reference window. Not tied to the project.
/// </summary>
private Tools.WpfGui.AsciiChart mAsciiChartDialog;
/// <summary>
/// Returns true if the ASCII chart window is currently open.
/// </summary>
public bool IsAsciiChartOpen { get { return mAsciiChartDialog != null; } }
/// <summary>
/// List of recently-opened projects.
/// </summary>
public List<string> RecentProjectPaths = new List<string>(MAX_RECENT_PROJECTS);
public const int MAX_RECENT_PROJECTS = 6;
/// <summary>
/// Analyzed selection state, updated whenever the selection changes.
/// </summary>
public SelectionState SelectionAnalysis { get; set; }
/// <summary>
/// Activity log generated by the code and data analyzers. Displayed in window.
/// </summary>
private DebugLog mGenerationLog;
/// <summary>
/// Timing data generated during analysis.
/// </summary>
TaskTimer mReanalysisTimer = new TaskTimer();
/// <summary>
/// Stack for navigate forward/backward.
/// </summary>
private NavStack mNavStack = new NavStack();
/// <summary>
/// Output format configuration.
/// </summary>
private Formatter.FormatConfig mFormatterConfig;
/// <summary>
/// Output format controller.
///
/// This is shared with the DisplayList.
/// </summary>
private Formatter mOutputFormatter;
/// <summary>
/// Pseudo-op names.
///
/// This is shared with the DisplayList.
/// </summary>
private PseudoOp.PseudoOpNames mPseudoOpNames;
/// <summary>
/// String we most recently searched for.
/// </summary>
private string mFindString = string.Empty;
/// <summary>
/// Initial start point of most recent search.
/// </summary>
private int mFindStartIndex = -1;
/// <summary>
/// Used to highlight the line that is the target of the selected line.
/// </summary>
private int mTargetHighlightIndex = -1;
/// <summary>
/// CPU definition used when the Formatter was created. If the CPU choice or
/// inclusion of undocumented opcodes changes, we need to wipe the formatter.
/// </summary>
private CpuDef mOutputFormatterCpuDef;
/// <summary>
/// Instruction description object. Used for Info window.
/// </summary>
private OpDescription mOpDesc = OpDescription.GetOpDescription(null);
/// <summary>
/// If true, plugins will execute in the main application's AppDomain instead of
/// the sandbox.
/// </summary>
private bool mUseMainAppDomainForPlugins = false;
/// <summary>
/// Code list column numbers.
/// </summary>
public enum CodeListColumn {
Offset = 0, Address, Bytes, Flags, Attributes, Label, Opcode, Operand, Comment,
COUNT // must be last; must equal number of columns
}
/// <summary>
/// Clipboard format enumeration.
/// </summary>
public enum ClipLineFormat {
Unknown = -1,
AssemblerSource = 0,
Disassembly = 1,
AllColumns = 2
}
/// <summary>
/// True if a project is open and AnalyzeUncategorizedData is enabled.
/// </summary>
public bool IsAnalyzeUncategorizedDataEnabled {
get {
if (mProject == null) {
return false;
}
return mProject.ProjectProps.AnalysisParams.AnalyzeUncategorizedData;
}
}
#region Init and settings
public MainController(MainWindow win) {
mMainWin = win;
ScriptManager.UseKeepAliveHack = true;
}
/// <summary>
/// Early initialization, before the window is visible. Notably, we want to get the
/// window placement data, so we can position and size the window before it's first
/// drawn (avoids a blink).
/// </summary>
public void WindowSourceInitialized() {
// Load the settings from the file. If this fails we have no way to tell the user,
// so just keep going.
LoadAppSettings();
SetAppWindowLocation();
}
/// <summary>
/// Perform one-time initialization after the Window has finished loading. We defer
/// to this point so we can report fatal errors directly to the user.
/// </summary>
public void WindowLoaded() {
Debug.Assert(CommonUtil.RangeSet.Test());
Debug.Assert(CommonUtil.TypedRangeSet.Test());
Debug.Assert(CommonUtil.Version.Test());
if (RuntimeDataAccess.GetDirectory() == null) {
MessageBox.Show(Res.Strings.RUNTIME_DIR_NOT_FOUND,
Res.Strings.RUNTIME_DIR_NOT_FOUND_CAPTION,
MessageBoxButton.OK, MessageBoxImage.Error);
Application.Current.Shutdown();
return;
}
try {
PluginDllCache.PreparePluginDir();
} catch (Exception ex) {
string pluginPath = PluginDllCache.GetPluginDirPath();
if (pluginPath == null) {
pluginPath = "<???>";
}
string msg = string.Format(Res.Strings.PLUGIN_DIR_FAIL_FMT,
pluginPath + ": " + ex.Message);
MessageBox.Show(msg, Res.Strings.PLUGIN_DIR_FAIL_CAPTION,
MessageBoxButton.OK, MessageBoxImage.Error);
Application.Current.Shutdown();
return;
}
// Place the main window and apply the various settings.
ApplyAppSettings();
UpdateTitle();
mMainWin.UpdateRecentLinks();
ProcessCommandLine();
// Create an initial value.
SelectionAnalysis = UpdateSelectionState();
}
private void ProcessCommandLine() {
string[] args = Environment.GetCommandLineArgs();
if (args.Length == 2) {
DoOpenFile(Path.GetFullPath(args[1]));
}
}
/// <summary>
/// Loads settings from the settings file into AppSettings.Global. Does not apply
/// them to the ProjectView.
/// </summary>
private void LoadAppSettings() {
AppSettings settings = AppSettings.Global;
// Set some default settings for first-time use. The general rule is to set
// a default value of false, 0, or the empty string, so we only need to set
// values here when that isn't the case. The point at which the setting is
// actually used is expected to do something reasonable by default.
settings.SetBool(AppSettings.SYMWIN_SHOW_USER, true);
settings.SetBool(AppSettings.SYMWIN_SHOW_PROJECT, true);
settings.SetBool(AppSettings.SYMWIN_SHOW_PLATFORM, false);
settings.SetBool(AppSettings.SYMWIN_SHOW_AUTO, false);
settings.SetBool(AppSettings.SYMWIN_SHOW_CONST, true);
settings.SetBool(AppSettings.SYMWIN_SHOW_ADDR, true);
settings.SetBool(AppSettings.SYMWIN_SORT_ASCENDING, true);
settings.SetInt(AppSettings.SYMWIN_SORT_COL, (int)Symbol.SymbolSortField.Name);
settings.SetBool(AppSettings.FMT_UPPER_OPERAND_A, true);
settings.SetBool(AppSettings.FMT_UPPER_OPERAND_S, true);
settings.SetBool(AppSettings.FMT_ADD_SPACE_FULL_COMMENT, true);
settings.SetBool(AppSettings.FMT_SPACES_BETWEEN_BYTES, true);
settings.SetString(AppSettings.FMT_OPCODE_SUFFIX_LONG, "l");
settings.SetString(AppSettings.FMT_OPERAND_PREFIX_ABS, "a:");
settings.SetString(AppSettings.FMT_OPERAND_PREFIX_LONG, "f:");
settings.SetBool(AppSettings.SRCGEN_ADD_IDENT_COMMENT, true);
settings.SetBool(AppSettings.SRCGEN_LONG_LABEL_NEW_LINE, true);
#if DEBUG
settings.SetBool(AppSettings.DEBUG_MENU_ENABLED, true);
#else
settings.SetBool(AppSettings.DEBUG_MENU_ENABLED, false);
#endif
// Make sure we have entries for these.
settings.SetString(AppSettings.CDLV_FONT_FAMILY,
mMainWin.CodeListFontFamily.ToString());
settings.SetInt(AppSettings.CDLV_FONT_SIZE, (int)mMainWin.CodeListFontSize);
// Character and string delimiters.
Formatter.DelimiterSet chrDel = Formatter.DelimiterSet.GetDefaultCharDelimiters();
string chrSer = chrDel.Serialize();
settings.SetString(AppSettings.FMT_CHAR_DELIM, chrSer);
Formatter.DelimiterSet strDel = Formatter.DelimiterSet.GetDefaultStringDelimiters();
string strSer = strDel.Serialize();
settings.SetString(AppSettings.FMT_STRING_DELIM, strSer);
// Load the settings file, and merge it into the globals.
string runtimeDataDir = RuntimeDataAccess.GetDirectory();
if (runtimeDataDir == null) {
Debug.WriteLine("Unable to load settings file");
return;
}
string settingsDir = Path.GetDirectoryName(runtimeDataDir);
string settingsPath = Path.Combine(settingsDir, SETTINGS_FILE_NAME);
try {
string text = File.ReadAllText(settingsPath);
AppSettings fileSettings = AppSettings.Deserialize(text);
AppSettings.Global.MergeSettings(fileSettings);
Debug.WriteLine("Settings file loaded and merged");
} catch (Exception ex) {
Debug.WriteLine("Unable to read settings file: " + ex.Message);
}
}
/// <summary>
/// Saves AppSettings to a file.
/// </summary>
private void SaveAppSettings() {
if (!AppSettings.Global.Dirty) {
Debug.WriteLine("Settings not dirty, not saving");
return;
}
// Main window position and size.
AppSettings.Global.SetString(AppSettings.MAIN_WINDOW_PLACEMENT,
mMainWin.GetPlacement());
// Horizontal splitters.
AppSettings.Global.SetInt(AppSettings.MAIN_LEFT_PANEL_WIDTH,
(int)mMainWin.LeftPanelWidth);
AppSettings.Global.SetInt(AppSettings.MAIN_RIGHT_PANEL_WIDTH,
(int)mMainWin.RightPanelWidth);
// Vertical splitters.
AppSettings.Global.SetInt(AppSettings.MAIN_REFERENCES_HEIGHT,
(int)mMainWin.ReferencesPanelHeight);
AppSettings.Global.SetInt(AppSettings.MAIN_SYMBOLS_HEIGHT,
(int)mMainWin.SymbolsPanelHeight);
mMainWin.CaptureColumnWidths();
string runtimeDataDir = RuntimeDataAccess.GetDirectory();
if (runtimeDataDir == null) {
Debug.WriteLine("Unable to save settings file");
return;
}
string settingsDir = Path.GetDirectoryName(runtimeDataDir);
string settingsPath = Path.Combine(settingsDir, SETTINGS_FILE_NAME);
try {
string cereal = AppSettings.Global.Serialize();
File.WriteAllText(settingsPath, cereal);
AppSettings.Global.Dirty = false;
Debug.WriteLine("Saved settings (" + settingsPath + ")");
} catch (Exception ex) {
Debug.WriteLine("Failed to save settings: " + ex.Message);
}
}
/// <summary>
/// Replaces the contents of the global settings object with the new settings,
/// then applies them to the project.
/// </summary>
/// <param name="settings">New settings.</param>
public void SetAppSettings(AppSettings settings) {
AppSettings.Global.ReplaceSettings(settings);
ApplyAppSettings();
// We get called whenever Apply or OK is hit in the settings editor, so it's
// a pretty good time to save the settings out.
SaveAppSettings();
}
/// <summary>
/// Sets the app window's location and size. This should be called before the window has
/// finished initialization.
/// </summary>
private void SetAppWindowLocation() {
const int DEFAULT_SPLIT = 250;
AppSettings settings = AppSettings.Global;
string placement = settings.GetString(AppSettings.MAIN_WINDOW_PLACEMENT, null);
if (placement != null) {
mMainWin.SetPlacement(placement);
}
mMainWin.LeftPanelWidth =
settings.GetInt(AppSettings.MAIN_LEFT_PANEL_WIDTH, DEFAULT_SPLIT);
mMainWin.RightPanelWidth =
settings.GetInt(AppSettings.MAIN_RIGHT_PANEL_WIDTH, DEFAULT_SPLIT);
mMainWin.ReferencesPanelHeight =
settings.GetInt(AppSettings.MAIN_REFERENCES_HEIGHT, 350);
mMainWin.SymbolsPanelHeight =
settings.GetInt(AppSettings.MAIN_SYMBOLS_HEIGHT, 400);
mMainWin.RestoreColumnWidths();
}
/// <summary>
/// Applies "actionable" settings to the ProjectView, pulling them out of the global
/// settings object. If a project is open, refreshes the display list and all sub-windows.
/// </summary>
private void ApplyAppSettings() {
Debug.WriteLine("ApplyAppSettings...");
AppSettings settings = AppSettings.Global;
// Set up the formatter.
mFormatterConfig = new Formatter.FormatConfig();
AsmGen.GenCommon.ConfigureFormatterFromSettings(AppSettings.Global,
ref mFormatterConfig);
mFormatterConfig.mEndOfLineCommentDelimiter = ";";
mFormatterConfig.mFullLineCommentDelimiterBase = ";";
mFormatterConfig.mBoxLineCommentDelimiter = string.Empty;
mFormatterConfig.mLocalVariableLablePrefix =
settings.GetString(AppSettings.FMT_LOCAL_VARIABLE_PREFIX, string.Empty);
string chrDelCereal = settings.GetString(AppSettings.FMT_CHAR_DELIM, null);
if (chrDelCereal != null) {
mFormatterConfig.mCharDelimiters =
Formatter.DelimiterSet.Deserialize(chrDelCereal);
}
string strDelCereal = settings.GetString(AppSettings.FMT_STRING_DELIM, null);
if (strDelCereal != null) {
mFormatterConfig.mStringDelimiters =
Formatter.DelimiterSet.Deserialize(strDelCereal);
}
// Update the formatter, and null out mOutputFormatterCpuDef to force a refresh
// of related items.
mOutputFormatter = new Formatter(mFormatterConfig);
mOutputFormatterCpuDef = null;
// Set pseudo-op names. Entries aren't allowed to be blank, so we start with the
// default values and merge in whatever the user has configured.
mPseudoOpNames = PseudoOp.DefaultPseudoOpNames;
string pseudoCereal = settings.GetString(AppSettings.FMT_PSEUDO_OP_NAMES, null);
if (!string.IsNullOrEmpty(pseudoCereal)) {
PseudoOp.PseudoOpNames deser = PseudoOp.PseudoOpNames.Deserialize(pseudoCereal);
if (deser != null) {
mPseudoOpNames = PseudoOp.PseudoOpNames.Merge(mPseudoOpNames, deser);
}
}
// Configure the Symbols window.
mMainWin.SymFilterUserLabels =
settings.GetBool(AppSettings.SYMWIN_SHOW_USER, false);
mMainWin.SymFilterAutoLabels =
settings.GetBool(AppSettings.SYMWIN_SHOW_AUTO, false);
mMainWin.SymFilterProjectSymbols =
settings.GetBool(AppSettings.SYMWIN_SHOW_PROJECT, false);
mMainWin.SymFilterPlatformSymbols =
settings.GetBool(AppSettings.SYMWIN_SHOW_PLATFORM, false);
mMainWin.SymFilterConstants =
settings.GetBool(AppSettings.SYMWIN_SHOW_CONST, false);
mMainWin.SymFilterAddresses =
settings.GetBool(AppSettings.SYMWIN_SHOW_ADDR, false);
// Get the configured font info. If nothing is configured, use whatever the
// code list happens to be using now.
string fontFamilyName = settings.GetString(AppSettings.CDLV_FONT_FAMILY, null);
if (fontFamilyName == null) {
fontFamilyName = mMainWin.CodeListFontFamily.ToString();
}
int size = settings.GetInt(AppSettings.CDLV_FONT_SIZE, -1);
if (size <= 0) {
size = (int)mMainWin.CodeListFontSize;
}
mMainWin.SetCodeListFont(fontFamilyName, size);
// Update the column widths. This was done earlier during init, but may need to be
// repeated if the show/hide buttons were used in Settings.
mMainWin.RestoreColumnWidths();
// Unpack the recent-project list.
UnpackRecentProjectList();
// Enable the DEBUG menu if configured.
mMainWin.ShowDebugMenu =
AppSettings.Global.GetBool(AppSettings.DEBUG_MENU_ENABLED, false);
// Finally, update the display list generator with all the fancy settings.
if (CodeLineList != null) {
// Regenerate the display list with the latest formatter config and
// pseudo-op definition. (These are set as part of the refresh.)
UndoableChange uc =
UndoableChange.CreateDummyChange(UndoableChange.ReanalysisScope.DisplayOnly);
ApplyChanges(new ChangeSet(uc), false);
}
}
private void UnpackRecentProjectList() {
RecentProjectPaths.Clear();
string cereal = AppSettings.Global.GetString(
AppSettings.PRVW_RECENT_PROJECT_LIST, null);
if (string.IsNullOrEmpty(cereal)) {
return;
}
try {
JavaScriptSerializer ser = new JavaScriptSerializer();
RecentProjectPaths = ser.Deserialize<List<string>>(cereal);
} catch (Exception ex) {
Debug.WriteLine("Failed deserializing recent projects: " + ex.Message);
return;
}
}
/// <summary>
/// Ensures that the named project is at the top of the list. If it's elsewhere
/// in the list, move it to the top. Excess items are removed.
/// </summary>
/// <param name="projectPath"></param>
private void UpdateRecentProjectList(string projectPath) {
if (string.IsNullOrEmpty(projectPath)) {
// This can happen if you create a new project, then close the window
// without having saved it.
return;
}
int index = RecentProjectPaths.IndexOf(projectPath);
if (index == 0) {
// Already in the list, nothing changes. No need to update anything else.
return;
}
if (index > 0) {
RecentProjectPaths.RemoveAt(index);
}
RecentProjectPaths.Insert(0, projectPath);
// Trim the list to the max allowed.
while (RecentProjectPaths.Count > MAX_RECENT_PROJECTS) {
Debug.WriteLine("Recent projects: dropping " +
RecentProjectPaths[MAX_RECENT_PROJECTS]);
RecentProjectPaths.RemoveAt(MAX_RECENT_PROJECTS);
}
// Store updated list in app settings. JSON-in-JSON is ugly and inefficient,
// but it'll do for now.
JavaScriptSerializer ser = new JavaScriptSerializer();
string cereal = ser.Serialize(RecentProjectPaths);
AppSettings.Global.SetString(AppSettings.PRVW_RECENT_PROJECT_LIST, cereal);
mMainWin.UpdateRecentLinks();
}
/// <summary>
/// Updates the main form title to show project name and modification status.
/// </summary>
private void UpdateTitle() {
// Update main window title.
StringBuilder sb = new StringBuilder();
sb.Append(Res.Strings.TITLE_BASE);
if (mProject != null) {
sb.Append(" - ");
if (string.IsNullOrEmpty(mProjectPathName)) {
sb.Append(Res.Strings.TITLE_NEW_PROJECT);
} else {
sb.Append(Path.GetFileName(mProjectPathName));
}
if (mProject.IsDirty) {
sb.Append(" ");
sb.Append(Res.Strings.TITLE_MODIFIED);
}
}
mMainWin.Title = sb.ToString();
}
#endregion Init and settings
#region Project management
private bool PrepareNewProject(string dataPathName, SystemDef sysDef) {
DisasmProject proj = new DisasmProject();
mDataPathName = dataPathName;
mProjectPathName = string.Empty;
byte[] fileData = null;
try {
fileData = LoadDataFile(dataPathName);
} catch (Exception ex) {
Debug.WriteLine("PrepareNewProject exception: " + ex);
string message = Res.Strings.OPEN_DATA_FAIL_CAPTION;
string caption = Res.Strings.OPEN_DATA_FAIL_MESSAGE + ": " + ex.Message;
MessageBox.Show(caption, message, MessageBoxButton.OK,
MessageBoxImage.Error);
return false;
}
proj.UseMainAppDomainForPlugins = mUseMainAppDomainForPlugins;
proj.Initialize(fileData.Length);
proj.PrepForNew(fileData, Path.GetFileName(dataPathName));
// Initial header comment is the program name and version.
string cmt = string.Format(Res.Strings.DEFAULT_HEADER_COMMENT_FMT, App.ProgramVersion);
proj.LongComments.Add(LineListGen.Line.HEADER_COMMENT_OFFSET,
new MultiLineComment(cmt));
// The system definition provides a set of defaults that can be overridden.
// We pull everything of interest out and then discard the object.
proj.ApplySystemDef(sysDef);
mProject = proj;
return true;
}
#if false
private class FinishPrepProgress : WorkProgress.IWorker {
public string ExtMessages { get; private set; }
private MainController mMainCtrl;
public FinishPrepProgress(MainController mainCtrl) {
mMainCtrl = mainCtrl;
}
public object DoWork(BackgroundWorker worker) {
string messages = mMainCtrl.mProject.LoadExternalFiles();
mMainCtrl.DoRefreshProject(UndoableChange.ReanalysisScope.CodeAndData);
return messages;
}
public void RunWorkerCompleted(object results) {
ExtMessages = (string)results;
}
}
#endif
private void FinishPrep() {
CodeLineList = new LineListGen(mProject, mMainWin.CodeDisplayList,
mOutputFormatter, mPseudoOpNames);
string messages = mProject.LoadExternalFiles();
if (messages.Length != 0) {
// ProjectLoadIssues isn't quite the right dialog, but it'll do. This is
// purely informative; no decision needs to be made.
ProjectLoadIssues dlg = new ProjectLoadIssues(mMainWin, messages,
ProjectLoadIssues.Buttons.Continue);
dlg.ShowDialog();
}
// Ideally we'd call DoRefreshProject (and LoadExternalFiles) from a progress
// dialog, but we're not allowed to update the DisplayList from a different thread.
RefreshProject(UndoableChange.ReanalysisScope.CodeAndData);
// Populate the Symbols list.
PopulateSymbolsList();
// Load initial contents of Notes panel.
PopulateNotesList();
mMainWin.ShowCodeListView = true;
mNavStack.Clear();
UpdateRecentProjectList(mProjectPathName);
UpdateTitle();
}
/// <summary>
/// Loads the data file, reading it entirely into memory.
///
/// All errors are reported as exceptions.
/// </summary>
/// <param name="dataFileName">Full pathname.</param>
/// <returns>Data file contents.</returns>
private byte[] LoadDataFile(string dataFileName) {
byte[] fileData;
using (FileStream fs = File.Open(dataFileName, FileMode.Open, FileAccess.Read)) {
// Check length; should have been caught earlier.
if (fs.Length > DisasmProject.MAX_DATA_FILE_SIZE) {
throw new InvalidDataException(
string.Format(Res.Strings.OPEN_DATA_TOO_LARGE_FMT,
fs.Length / 1024, DisasmProject.MAX_DATA_FILE_SIZE / 1024));
} else if (fs.Length == 0) {
throw new InvalidDataException(Res.Strings.OPEN_DATA_EMPTY);
}
fileData = new byte[fs.Length];
int actual = fs.Read(fileData, 0, (int)fs.Length);
if (actual != fs.Length) {
// Not expected -- should be able to read the entire file in one shot.
throw new Exception(Res.Strings.OPEN_DATA_PARTIAL_READ);
}
}
return fileData;
}
/// <summary>
/// Applies the changes to the project, adds them to the undo stack, and updates
/// the display.
/// </summary>
/// <param name="cs">Set of changes to apply.</param>
private void ApplyUndoableChanges(ChangeSet cs) {
if (cs.Count == 0) {
Debug.WriteLine("ApplyUndoableChanges: change set is empty");
}
ApplyChanges(cs, false);
mProject.PushChangeSet(cs);
UpdateTitle();
// If the debug dialog is visible, update it.
if (mShowUndoRedoHistoryDialog != null) {
mShowUndoRedoHistoryDialog.DisplayText = mProject.DebugGetUndoRedoHistory();
}
}
/// <summary>
/// Applies the changes to the project, and updates the display.
///
/// This is called by the undo/redo commands. Don't call this directly from the
/// various UI-driven functions, as this does not add the change to the undo stack.
/// </summary>
/// <param name="cs">Set of changes to apply.</param>
/// <param name="backward">If set, undo the changes instead.</param>
private void ApplyChanges(ChangeSet cs, bool backward) {
mReanalysisTimer.Clear();
mReanalysisTimer.StartTask("ProjectView.ApplyChanges()");
mReanalysisTimer.StartTask("Save selection");
mMainWin.CodeListView_DebugValidateSelectionCount();
int topItemIndex = mMainWin.CodeListView_GetTopIndex();
LineListGen.SavedSelection savedSel = LineListGen.SavedSelection.Generate(
CodeLineList, mMainWin.CodeDisplayList.SelectedIndices, topItemIndex);
//savedSel.DebugDump();
// Clear this so we don't try to fiddle with it later.
mTargetHighlightIndex = -1;
mReanalysisTimer.EndTask("Save selection");
mReanalysisTimer.StartTask("Apply changes");
UndoableChange.ReanalysisScope needReanalysis = mProject.ApplyChanges(cs, backward,
out RangeSet affectedOffsets);
mReanalysisTimer.EndTask("Apply changes");
string refreshTaskStr = "Refresh w/reanalysis=" + needReanalysis;
mReanalysisTimer.StartTask(refreshTaskStr);
if (needReanalysis != UndoableChange.ReanalysisScope.None) {
Debug.WriteLine("Refreshing project (" + needReanalysis + ")");
RefreshProject(needReanalysis);
} else {
Debug.WriteLine("Refreshing " + affectedOffsets.Count + " offsets");
RefreshCodeListViewEntries(affectedOffsets);
mProject.Validate(); // shouldn't matter w/o reanalysis, but do it anyway
}
mReanalysisTimer.EndTask(refreshTaskStr);
DisplayListSelection newSel = savedSel.Restore(CodeLineList, out topItemIndex);
//newSel.DebugDump();
// Restore the selection. The selection-changed event will cause updates to the
// references, notes, and info panels.
mReanalysisTimer.StartTask("Restore selection and top position");
mMainWin.CodeListView_SetSelection(newSel);
mMainWin.CodeListView_SetTopIndex(topItemIndex);
mReanalysisTimer.EndTask("Restore selection and top position");
// Update the Notes and Symbols windows. References should refresh automatically
// when the selection is restored.
PopulateNotesList();
PopulateSymbolsList();
mReanalysisTimer.EndTask("ProjectView.ApplyChanges()");
//mReanalysisTimer.DumpTimes("ProjectView timers:", mGenerationLog);
if (mShowAnalysisTimersDialog != null) {
string timerStr = mReanalysisTimer.DumpToString("ProjectView timers:");
mShowAnalysisTimersDialog.DisplayText = timerStr;
}
// Lines may have moved around. Update the selection highlight. It's important
// we do it here, and not down in DoRefreshProject(), because at that point the
// ListView's selection index could be referencing a line off the end.
// (This may not be necessary with WPF, because the way highlights work changed.)
UpdateSelectionHighlight();
}
/// <summary>
/// Updates all of the specified ListView entries. This is called after minor changes,
/// such as editing a comment or renaming a label, that can be handled by regenerating
/// selected parts of the DisplayList.
/// </summary>
/// <param name="offsetSet"></param>
private void RefreshCodeListViewEntries(RangeSet offsetSet) {
IEnumerator<RangeSet.Range> iter = offsetSet.RangeListIterator;
while (iter.MoveNext()) {
RangeSet.Range range = iter.Current;
CodeLineList.GenerateRange(range.Low, range.High);
}
}
/// <summary>
/// Refreshes the project after something of substance has changed. Some
/// re-analysis will be done, followed by a complete rebuild of the DisplayList.
/// </summary>
/// <param name="reanalysisRequired">Indicates whether reanalysis is required, and
/// what level.</param>
private void RefreshProject(UndoableChange.ReanalysisScope reanalysisRequired) {
Debug.Assert(reanalysisRequired != UndoableChange.ReanalysisScope.None);
// NOTE: my goal is to arrange things so that reanalysis (data-only, and ideally
// code+data) takes less than 100ms. With that response time there's no need for
// background processing and progress bars. Since we need to do data-only
// reanalysis after many common operations, the program becomes unpleasant to
// use if we miss this goal, and progress bars won't make it less so.
if (mProject.FileDataLength > 65536) {
try {
Mouse.OverrideCursor = Cursors.Wait;
DoRefreshProject(reanalysisRequired);
} finally {
Mouse.OverrideCursor = null;
}
} else {
DoRefreshProject(reanalysisRequired);
}
if (mGenerationLog != null) {
//mReanalysisTimer.StartTask("Save _log");
//mGenerationLog.WriteToFile(@"C:\Src\WorkBench\SourceGen\TestData\_log.txt");
//mReanalysisTimer.EndTask("Save _log");
if (mShowAnalyzerOutputDialog != null) {
mShowAnalyzerOutputDialog.DisplayText = mGenerationLog.WriteToString();
}
}
if (mShowProblemListDialog != null) {
mShowProblemListDialog.Update();
}
if (FormatDescriptor.DebugCreateCount != 0) {
Debug.WriteLine("FormatDescriptor total=" + FormatDescriptor.DebugCreateCount +
" prefab=" + FormatDescriptor.DebugPrefabCount + " (" +
(FormatDescriptor.DebugPrefabCount * 100) / FormatDescriptor.DebugCreateCount +
"%)");
}
}
/// <summary>
/// Refreshes the project after something of substance has changed.
/// </summary>
/// <remarks>
/// Ideally from this point on we can run on a background thread. The tricky part
/// is the close relationship between LineListGen and DisplayList -- we can't update
/// DisplayList from a background thread. Until that's fixed, putting up a "working..."
/// dialog or other UI will be awkward.
/// </remarks>
/// <param name="reanalysisRequired">Indicates whether reanalysis is required, and
/// what level.</param>
private void DoRefreshProject(UndoableChange.ReanalysisScope reanalysisRequired) {
// Changing the CPU type or whether undocumented instructions are supported
// invalidates the Formatter's mnemonic cache. We can change these values
// through undo/redo, so we need to check it here.
if (mOutputFormatterCpuDef != mProject.CpuDef) { // reference equality is fine
Debug.WriteLine("CpuDef has changed, resetting formatter (now " +
mProject.CpuDef + ")");
mOutputFormatter = new Formatter(mFormatterConfig);
CodeLineList.SetFormatter(mOutputFormatter);
CodeLineList.SetPseudoOpNames(mPseudoOpNames);
mOutputFormatterCpuDef = mProject.CpuDef;
}
if (reanalysisRequired != UndoableChange.ReanalysisScope.DisplayOnly) {
mGenerationLog = new CommonUtil.DebugLog();
mGenerationLog.SetMinPriority(CommonUtil.DebugLog.Priority.Debug);
mGenerationLog.SetShowRelTime(true);
mReanalysisTimer.StartTask("Call DisasmProject.Analyze()");
mProject.Analyze(reanalysisRequired, mGenerationLog, mReanalysisTimer);
mReanalysisTimer.EndTask("Call DisasmProject.Analyze()");
}
mReanalysisTimer.StartTask("Generate DisplayList");
CodeLineList.GenerateAll();
mReanalysisTimer.EndTask("Generate DisplayList");
}
#endregion Project management
#region Main window UI event handlers
public void NewProject() {
if (!CloseProject()) {
return;
}
string sysDefsPath = RuntimeDataAccess.GetPathName("SystemDefs.json");
if (sysDefsPath == null) {
MessageBox.Show(Res.Strings.ERR_LOAD_CONFIG_FILE, Res.Strings.OPERATION_FAILED,
MessageBoxButton.OK, MessageBoxImage.Error);
return;
}
SystemDefSet sds = null;
try {
sds = SystemDefSet.ReadFile(sysDefsPath);
} catch (Exception ex) {
Debug.WriteLine("Failed loading system def set: " + ex);
MessageBox.Show(Res.Strings.ERR_LOAD_CONFIG_FILE, Res.Strings.OPERATION_FAILED,
MessageBoxButton.OK, MessageBoxImage.Error);
return;
}
NewProject dlg = new NewProject(mMainWin, sds);
if (dlg.ShowDialog() != true) {
return;
}
bool ok = PrepareNewProject(Path.GetFullPath(dlg.DataFileName), dlg.SystemDef);
if (ok) {
FinishPrep();
}
}
public void OpenRecentProject(int projIndex) {
if (!CloseProject()) {
return;
}
DoOpenFile(RecentProjectPaths[projIndex]);
}
/// <summary>
/// Handles opening an existing project by letting the user select the project file.
/// </summary>
public void OpenProject() {
if (!CloseProject()) {
return;
}
OpenFileDialog fileDlg = new OpenFileDialog() {
Filter = ProjectFile.FILENAME_FILTER + "|" + Res.Strings.FILE_FILTER_ALL,
FilterIndex = 1
};
if (fileDlg.ShowDialog() != true) {
return;
}
string projPathName = Path.GetFullPath(fileDlg.FileName);
DoOpenFile(projPathName);
}
/// <summary>
/// Handles opening an existing project, given a full pathname to the project file.
/// </summary>
private void DoOpenFile(string projPathName) {
Debug.WriteLine("DoOpenFile: " + projPathName);
Debug.Assert(mProject == null);
if (!File.Exists(projPathName)) {
// Should only happen for projects in "recents".
string msg = string.Format(Res.Strings.ERR_FILE_NOT_FOUND_FMT, projPathName);
MessageBox.Show(msg, Res.Strings.ERR_FILE_GENERIC_CAPTION,
MessageBoxButton.OK, MessageBoxImage.Error);
return;
}
DisasmProject newProject = new DisasmProject();
newProject.UseMainAppDomainForPlugins = mUseMainAppDomainForPlugins;
// Deserialize the project file. I want to do this before loading the data file
// in case we decide to store the data file name in the project (e.g. the data
// file is a disk image or zip archive, and we need to know which part(s) to
// extract).
if (!ProjectFile.DeserializeFromFile(projPathName, newProject,
out FileLoadReport report)) {
// Should probably use a less-busy dialog for something simple like
// "permission denied", but the open file dialog handles most simple
// stuff directly.
ProjectLoadIssues dlg = new ProjectLoadIssues(mMainWin, report.Format(),
ProjectLoadIssues.Buttons.Cancel);
dlg.ShowDialog();
// ignore dlg.DialogResult
return;
}
// Now open the data file, generating the pathname by stripping off the ".dis65"
// extension. If we can't find the file, show a message box and offer the option to
// locate it manually, repeating the process until successful or canceled.
const string UNKNOWN_FILE = "UNKNOWN";
string dataPathName;
if (projPathName.Length <= ProjectFile.FILENAME_EXT.Length) {
dataPathName = UNKNOWN_FILE;
} else {
dataPathName = projPathName.Substring(0,
projPathName.Length - ProjectFile.FILENAME_EXT.Length);
}
byte[] fileData;
while ((fileData = FindValidDataFile(ref dataPathName, newProject,
out bool cancel)) == null) {
if (cancel) {
// give up
Debug.WriteLine("Abandoning attempt to open project");
return;
}
}
newProject.SetFileData(fileData, Path.GetFileName(dataPathName), ref report);
// If there were warnings, notify the user and give the a chance to cancel.
if (report.Count != 0) {
ProjectLoadIssues dlg = new ProjectLoadIssues(mMainWin, report.Format(),
ProjectLoadIssues.Buttons.ContinueOrCancel);
bool? ok = dlg.ShowDialog();
if (ok != true) {
return;
}
}
mProject = newProject;
mProjectPathName = mProject.ProjectPathName = projPathName;
FinishPrep();
}
/// <summary>
/// Finds and loads the specified data file. The file's length and CRC must match
/// the project's expectations.
/// </summary>
/// <param name="dataPathName">Full path to file.</param>
/// <param name="proj">Project object.</param>
/// <param name="cancel">Returns true if we want to cancel the attempt.</param>
/// <returns></returns>
private byte[] FindValidDataFile(ref string dataPathName, DisasmProject proj,
out bool cancel) {
FileInfo fi = new FileInfo(dataPathName);
if (!fi.Exists) {
Debug.WriteLine("File '" + dataPathName + "' doesn't exist");
dataPathName = ChooseDataFile(dataPathName,
Res.Strings.OPEN_DATA_DOESNT_EXIST);
cancel = (dataPathName == null);
return null;
}
if (fi.Length != proj.FileDataLength) {
Debug.WriteLine("File '" + dataPathName + "' has length=" + fi.Length +
", expected " + proj.FileDataLength);
dataPathName = ChooseDataFile(dataPathName,
string.Format(Res.Strings.OPEN_DATA_WRONG_LENGTH_FMT,
fi.Length, proj.FileDataLength));
cancel = (dataPathName == null);
return null;
}
byte[] fileData = null;
try {
fileData = LoadDataFile(dataPathName);
} catch (Exception ex) {
Debug.WriteLine("File '" + dataPathName + "' failed to load: " + ex.Message);
dataPathName = ChooseDataFile(dataPathName,
string.Format(Res.Strings.OPEN_DATA_LOAD_FAILED_FMT, ex.Message));
cancel = (dataPathName == null);
return null;
}
uint crc = CRC32.OnWholeBuffer(0, fileData);
if (crc != proj.FileDataCrc32) {
Debug.WriteLine("File '" + dataPathName + "' has CRC32=" + crc +
", expected " + proj.FileDataCrc32);
// Format the CRC as signed decimal, so that interested parties can
// easily replace the value in the .dis65 file.
dataPathName = ChooseDataFile(dataPathName,
string.Format(Res.Strings.OPEN_DATA_WRONG_CRC_FMT,
(int)crc, (int)proj.FileDataCrc32));
cancel = (dataPathName == null);
return null;
}
cancel = false;
return fileData;
}
/// <summary>
/// Displays a "do you want to pick a different file" message, then (on OK) allows the
/// user to select a file.
/// </summary>
/// <param name="origPath">Pathname of original file.</param>
/// <param name="errorMsg">Message to display in the message box.</param>
/// <returns>Full path of file to open.</returns>
private string ChooseDataFile(string origPath, string errorMsg) {
DataFileLoadIssue dlg = new DataFileLoadIssue(mMainWin, origPath, errorMsg);
bool? ok = dlg.ShowDialog();
if (ok != true) {
return null;
}
OpenFileDialog fileDlg = new OpenFileDialog() {
FileName = Path.GetFileName(origPath),
Filter = Res.Strings.FILE_FILTER_ALL
};
if (fileDlg.ShowDialog() != true) {
return null;
}
string newPath = Path.GetFullPath(fileDlg.FileName);
Debug.WriteLine("User selected data file " + newPath);
return newPath;
}
/// <summary>
/// Saves the project, querying for the filename.
/// </summary>
/// <returns>True on success, false if the save attempt failed or was canceled.</returns>
public bool SaveProjectAs() {
SaveFileDialog fileDlg = new SaveFileDialog() {
Filter = ProjectFile.FILENAME_FILTER + "|" + Res.Strings.FILE_FILTER_ALL,
FilterIndex = 1,
ValidateNames = true,
AddExtension = true,
FileName = Path.GetFileName(mDataPathName) + ProjectFile.FILENAME_EXT
};
if (fileDlg.ShowDialog() != true) {
Debug.WriteLine("SaveAs canceled by user");
return false;
}
string pathName = Path.GetFullPath(fileDlg.FileName);
Debug.WriteLine("Project save path: " + pathName);
if (!DoSave(pathName)) {
return false;
}
// Success, record the path name.
mProjectPathName = mProject.ProjectPathName = pathName;
// add it to the title bar
UpdateTitle();
return true;
}
/// <summary>
/// Saves the project. If it hasn't been saved before, use save-as behavior instead.
/// </summary>
/// <returns>True on success, false if the save attempt failed.</returns>
public bool SaveProject() {
if (string.IsNullOrEmpty(mProjectPathName)) {
return SaveProjectAs();
}
return DoSave(mProjectPathName);
}
private bool DoSave(string pathName) {
Debug.WriteLine("SAVING " + pathName);
if (!ProjectFile.SerializeToFile(mProject, pathName, out string errorMessage)) {
MessageBox.Show(Res.Strings.ERR_PROJECT_SAVE_FAIL + ": " + errorMessage,
Res.Strings.OPERATION_FAILED,
MessageBoxButton.OK, MessageBoxImage.Error);
return false;
}
mProject.ResetDirtyFlag();
// If the debug dialog is visible, update it.
if (mShowUndoRedoHistoryDialog != null) {
mShowUndoRedoHistoryDialog.DisplayText = mProject.DebugGetUndoRedoHistory();
}
UpdateTitle();
// Update this, in case this was a new project.
UpdateRecentProjectList(pathName);
// Seems like a good time to save this off too.
SaveAppSettings();
return true;
}
/// <summary>
/// Handles main window closing.
/// </summary>
/// <returns>True if it's okay for the window to close, false to cancel it.</returns>
public bool WindowClosing() {
SaveAppSettings();
if (!CloseProject()) {
return false;
}
// WPF won't exit until all windows are closed, so any unowned windows need
// to be cleaned up here.
mAsciiChartDialog?.Close();
mHexDumpDialog?.Close();
mShowAnalysisTimersDialog?.Close();
mShowAnalyzerOutputDialog?.Close();
mShowProblemListDialog?.Close();
mShowUndoRedoHistoryDialog?.Close();
while (mUnownedWindows.Count > 0) {
int count = mUnownedWindows.Count;
mUnownedWindows[0].Close();
if (count == mUnownedWindows.Count) {
// Window failed to remove itself; this will cause an infinite loop.
// The user will have to close them manually.
Debug.Assert(false, "Failed to close window " + mUnownedWindows[0]);
break;
}
}
return true;
}
/// <summary>
/// Closes the project and associated modeless dialogs. Unsaved changes will be
/// lost, so if the project has outstanding changes the user will be given the
/// opportunity to cancel.
/// </summary>
/// <returns>True if the project was closed, false if the user chose to cancel.</returns>
public bool CloseProject() {
Debug.WriteLine("CloseProject() - dirty=" +
(mProject == null ? "N/A" : mProject.IsDirty.ToString()));
if (mProject != null && mProject.IsDirty) {
DiscardChanges dlg = new DiscardChanges(mMainWin);
bool? ok = dlg.ShowDialog();
if (ok != true) {
return false;
} else if (dlg.UserChoice == DiscardChanges.Choice.SaveAndContinue) {
if (!SaveProject()) {
return false;
}
}
}
// Close modeless dialogs that depend on project.
mHexDumpDialog?.Close();
mShowAnalysisTimersDialog?.Close();
mShowAnalyzerOutputDialog?.Close();
mShowProblemListDialog?.Close();
mShowUndoRedoHistoryDialog?.Close();
// Discard all project state.
if (mProject != null) {
mProject.Cleanup();
mProject = null;
}
mDataPathName = null;
mProjectPathName = null;
mTargetHighlightIndex = -1;
mMainWin.ShowCodeListView = false;
mMainWin.ProjectClosing();
mGenerationLog = null;
// Not necessary, but it lets us check the memory monitor to see if we got
// rid of everything.
GC.Collect();
return true;
}
public bool IsProjectOpen() {
return mProject != null;
}
public void AssembleProject() {
if (string.IsNullOrEmpty(mProjectPathName)) {
// We need a project pathname so we know where to write the assembler
// source files, and what to call the output files. We could just pop up the
// Save As dialog, but that seems confusing unless we do a custom dialog with
// an explanation, or have some annoying click-through.
//
// This only appears for never-saved projects, not projects with unsaved data.
MessageBox.Show(Res.Strings.SAVE_BEFORE_ASM, Res.Strings.SAVE_BEFORE_ASM_CAPTION,
MessageBoxButton.OK, MessageBoxImage.Information);
return;
}
AsmGen.WpfGui.GenAndAsm dlg =
new AsmGen.WpfGui.GenAndAsm(mMainWin, this, mProject, mProjectPathName);
dlg.ShowDialog();
}
/// <summary>
/// Copies the selection to the clipboard as formatted text.
/// </summary>
public void CopyToClipboard() {
DisplayListSelection selection = mMainWin.CodeDisplayList.SelectedIndices;
if (selection.Count == 0) {
Debug.WriteLine("Selection is empty!");
return;
}
ClipLineFormat format = (ClipLineFormat)AppSettings.Global.GetEnum(
AppSettings.CLIP_LINE_FORMAT,
typeof(ClipLineFormat),
(int)ClipLineFormat.AssemblerSource);
int[] rightWidths = new int[] { 9, 8, 11, 100 };
Exporter.ActiveColumnFlags colFlags = Exporter.ActiveColumnFlags.None;
if (format == ClipLineFormat.Disassembly) {
colFlags |= Exporter.ActiveColumnFlags.Address |
Exporter.ActiveColumnFlags.Bytes;
} else if (format == ClipLineFormat.AllColumns) {
colFlags = Exporter.ActiveColumnFlags.ALL;
}
Exporter eport = new Exporter(mProject, CodeLineList, mOutputFormatter,
colFlags, rightWidths);
eport.Selection = selection;
// Might want to set Mouse.OverrideCursor if the selection exceeds a few
// hundred thousand lines.
eport.SelectionToString(true, out string fullText, out string csvText);
DataObject dataObject = new DataObject();
dataObject.SetText(fullText.ToString());
// We want to have both plain text and CSV data on the clipboard. To add both
// formats we need to stream it to a DataObject. Complicating matters is Excel's
// entirely reasonable desire to have data in UTF-8 rather than UTF-16.
//
// (I'm not sure pasting assembly bits into Excel is actually useful, so this
// should probably be optional.)
//
// https://stackoverflow.com/a/369219/294248
const bool addCsv = true;
if (addCsv) {
byte[] csvData = Encoding.UTF8.GetBytes(csvText.ToString());
MemoryStream stream = new MemoryStream(csvData);
dataObject.SetData(DataFormats.CommaSeparatedValue, stream);
}
Clipboard.SetDataObject(dataObject, true);
}
/// <summary>
/// Opens the application settings dialog. All changes to settings are made directly
/// to the AppSettings.Global object.
/// </summary>
public void EditAppSettings() {
ShowAppSettings(mMainWin, WpfGui.EditAppSettings.Tab.Unknown,
AsmGen.AssemblerInfo.Id.Unknown);
}
public void ShowAppSettings(Window owner, EditAppSettings.Tab initialTab,
AsmGen.AssemblerInfo.Id initialAsmId) {
EditAppSettings dlg = new EditAppSettings(owner, mMainWin, this,
initialTab, initialAsmId);
dlg.ShowDialog();
// The settings code calls SetAppSettings() directly whenever "Apply" is hit.
}
public void HandleCodeListDoubleClick(int row, int col) {
//Debug.WriteLine("DCLICK: row=" + row + " col=" + col);
mMainWin.CodeListView_DebugValidateSelectionCount();
// Clicking on some types of lines, such as ORG directives, results in
// specific behavior regardless of which column you click in. We're just
// checking the clicked-on line to decide what action to take. If it doesn't
// make sense to do for a multi-line selection, the action will have been
// disabled.
LineListGen.Line line = CodeLineList[row];
switch (line.LineType) {
case LineListGen.Line.Type.EquDirective:
// Currently only does something for project symbols; platform symbols
// do nothing.
if (CanEditProjectSymbol()) {
EditProjectSymbol();
}
break;
case LineListGen.Line.Type.OrgDirective:
if (CanEditAddress()) {
EditAddress();
}
break;
case LineListGen.Line.Type.RegWidthDirective:
if (CanEditStatusFlags()) {
EditStatusFlags();
}
break;
case LineListGen.Line.Type.LongComment:
if (CanEditLongComment()) {
EditLongComment();
}
break;
case LineListGen.Line.Type.Note:
if (CanEditNote()) {
EditNote();
}
break;
case LineListGen.Line.Type.LocalVariableTable:
if (CanEditLocalVariableTable()) {
EditLocalVariableTable();
}
break;
case LineListGen.Line.Type.Code:
case LineListGen.Line.Type.Data:
// For code and data, we have to break it down by column.
switch ((CodeListColumn)col) {
case CodeListColumn.Offset:
// does nothing
break;
case CodeListColumn.Address:
// edit address
if (CanEditAddress()) {
EditAddress();
}
break;
case CodeListColumn.Bytes:
ShowHexDump();
break;
case CodeListColumn.Flags:
if (CanEditStatusFlags()) {
EditStatusFlags();
}
break;
case CodeListColumn.Attributes:
// does nothing
break;
case CodeListColumn.Label:
if (CanEditLabel()) {
EditLabel();
}
break;
case CodeListColumn.Opcode:
// File offset should always be valid, since we excluded the EQU
// statements and header comment earlier.
if (line.FileOffset >= 0) {
Anattrib attr = mProject.GetAnattrib(line.FileOffset);
FormatDescriptor dfd = attr.DataDescriptor;
// Does this have an operand with an in-file target offset?
// (Resolve it as a numeric reference.)
if (attr.OperandOffset >= 0) {
// Yup, find the line for that offset and jump to it.
GoToOffset(attr.OperandOffset, false, true);
} else if (dfd != null && dfd.HasSymbol) {
// Operand has a symbol, do a symbol lookup.
if (dfd.SymbolRef.IsVariable) {
GoToVarDefinition(line.FileOffset, dfd.SymbolRef, true);
} else {
int labelOffset = mProject.FindLabelOffsetByName(
dfd.SymbolRef.Label);
if (labelOffset >= 0) {
GoToOffset(labelOffset, false, true);
}
}
} else if (attr.IsDataStart || attr.IsInlineDataStart) {
// If it's an Address or Symbol, we can try to resolve
// the value. (Symbols should have been resolved by the
// previous clause, but Address entries would not have been.)
int operandOffset = DataAnalysis.GetDataOperandOffset(
mProject, line.FileOffset);
if (operandOffset >= 0) {
GoToOffset(operandOffset, false, true);
}
}
}
break;
case CodeListColumn.Operand:
if (CanEditOperand()) {
EditOperand();
}
break;
case CodeListColumn.Comment:
if (CanEditComment()) {
EditComment();
}
break;
}
break;
default:
Debug.WriteLine("Double-click: unhandled line type " + line.LineType);
break;
}
}
public bool CanDeleteMlc() {
if (SelectionAnalysis.mNumItemsSelected != 1) {
return false;
}
return (SelectionAnalysis.mLineType == LineListGen.Line.Type.LongComment ||
SelectionAnalysis.mLineType == LineListGen.Line.Type.Note);
}
// Delete multi-line comment (Note or LongComment)
public void DeleteMlc() {
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
LineListGen.Line line = CodeLineList[selIndex];
int offset = line.FileOffset;
UndoableChange uc;
if (line.LineType == LineListGen.Line.Type.Note) {
if (!mProject.Notes.TryGetValue(offset, out MultiLineComment oldNote)) {
Debug.Assert(false);
return;
}
uc = UndoableChange.CreateNoteChange(offset, oldNote, null);
} else if (line.LineType == LineListGen.Line.Type.LongComment) {
if (!mProject.LongComments.TryGetValue(offset, out MultiLineComment oldComment)) {
Debug.Assert(false);
return;
}
uc = UndoableChange.CreateLongCommentChange(offset, oldComment, null);
} else {
Debug.Assert(false);
return;
}
ChangeSet cs = new ChangeSet(uc);
ApplyUndoableChanges(cs);
}
public bool CanEditAddress() {
if (SelectionAnalysis.mNumItemsSelected != 1) {
return false;
}
EntityCounts counts = SelectionAnalysis.mEntityCounts;
// Line must be code, data, or an ORG directive.
return (counts.mDataLines > 0 || counts.mCodeLines > 0) ||
(SelectionAnalysis.mLineType == LineListGen.Line.Type.OrgDirective);
}
public void EditAddress() {
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
int offset = CodeLineList[selIndex].FileOffset;
Anattrib attr = mProject.GetAnattrib(offset);
EditAddress dlg = new EditAddress(mMainWin, attr.Address, mProject.CpuDef.MaxAddressValue);
if (dlg.ShowDialog() != true) {
return;
}
if (offset == 0 && dlg.Address < 0) {
// Not allowed. The AddressMap will just put it back, which confuses
// the undo operation.
Debug.WriteLine("EditAddress: not allowed to remove address at offset +000000");
} else if (attr.Address != dlg.Address) {
Debug.WriteLine("EditAddress: changing addr at offset +" + offset.ToString("x6") +
" to " + dlg.Address);
AddressMap addrMap = mProject.AddrMap;
// Get the previous address map entry for this exact offset, if one
// exists. This may be different from the value used as the default
// (attr.Address), which is the address assigned to the offset, in
// the case where no previous mapping existed.
int prevAddress = addrMap.Get(offset);
UndoableChange uc = UndoableChange.CreateAddressChange(offset,
prevAddress, dlg.Address);
ChangeSet cs = new ChangeSet(uc);
ApplyUndoableChanges(cs);
} else {
Debug.WriteLine("EditAddress: no change");
}
}
public bool CanEditComment() {
if (SelectionAnalysis.mNumItemsSelected != 1) {
return false;
}
// Line must be code or data.
return (SelectionAnalysis.mLineType == LineListGen.Line.Type.Code ||
SelectionAnalysis.mLineType == LineListGen.Line.Type.Data);
}
public void EditComment() {
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
int offset = CodeLineList[selIndex].FileOffset;
string oldComment = mProject.Comments[offset];
EditComment dlg = new EditComment(mMainWin, oldComment);
if (dlg.ShowDialog() == true) {
if (!oldComment.Equals(dlg.CommentText)) {
Debug.WriteLine("Changing comment at +" + offset.ToString("x6"));
UndoableChange uc = UndoableChange.CreateCommentChange(offset,
oldComment, dlg.CommentText);
ChangeSet cs = new ChangeSet(uc);
ApplyUndoableChanges(cs);
}
}
}
public void EditHeaderComment() {
EditLongComment(LineListGen.Line.HEADER_COMMENT_OFFSET);
}
public bool CanEditLabel() {
if (SelectionAnalysis.mNumItemsSelected != 1) {
return false;
}
EntityCounts counts = SelectionAnalysis.mEntityCounts;
// Single line, code or data.
return (counts.mDataLines > 0 || counts.mCodeLines > 0);
}
public void EditLabel() {
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
int offset = CodeLineList[selIndex].FileOffset;
Anattrib attr = mProject.GetAnattrib(offset);
EditLabel dlg = new EditLabel(mMainWin, attr.Symbol, attr.Address,
mProject.SymbolTable);
if (dlg.ShowDialog() != true) {
return;
}
// NOTE: if label matching is case-insensitive, we want to allow a situation
// where a label is being renamed from "FOO" to "Foo". (We should be able to
// test for object equality on the Symbol.)
if (attr.Symbol != dlg.LabelSym) {
Debug.WriteLine("Changing label at offset +" + offset.ToString("x6"));
// For undo/redo, we want to update the UserLabels value. This may
// be different from the Anattrib symbol, which can have an auto-generated
// value.
Symbol oldUserValue = null;
if (mProject.UserLabels.ContainsKey(offset)) {
oldUserValue = mProject.UserLabels[offset];
}
if (oldUserValue == dlg.LabelSym) {
// Only expected when attr.Symbol is Auto
Debug.Assert(attr.Symbol.SymbolSource == Symbol.Source.Auto);
Debug.Assert(oldUserValue == null);
Debug.WriteLine("Ignoring attempt to delete an auto label");
} else {
UndoableChange uc = UndoableChange.CreateLabelChange(offset,
oldUserValue, dlg.LabelSym);
ChangeSet cs = new ChangeSet(uc);
ApplyUndoableChanges(cs);
}
}
}
public bool CanCreateLocalVariableTable() {
if (SelectionAnalysis.mNumItemsSelected != 1) {
return false;
}
// Only allow on code lines. This is somewhat arbitrary; data would work fine.
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
if (CodeLineList[selIndex].LineType != LineListGen.Line.Type.Code) {
return false;
}
int offset = CodeLineList[selIndex].FileOffset;
// Don't allow creation if a table already exists.
return !mProject.LvTables.ContainsKey(offset);
}
public void CreateLocalVariableTable() {
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
int offset = CodeLineList[selIndex].FileOffset;
Debug.Assert(!mProject.LvTables.ContainsKey(offset));
CreateOrEditLocalVariableTable(offset);
}
public bool CanEditLocalVariableTable() {
if (SelectionAnalysis.mNumItemsSelected != 1) {
return false;
}
// Check to see if the offset of the first-defined table is less than or equal to
// the offset of the selected line. If so, we know there's a table, though we
// don't know which one.
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
int offset = CodeLineList[selIndex].FileOffset;
return mProject.LvTables.Count > 0 && mProject.LvTables.Keys[0] <= offset;
}
public void EditLocalVariableTable() {
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
int offset = CodeLineList[selIndex].FileOffset;
// Find the offset of the nearest table that's earlier in the file.
int bestOffset = -1;
foreach (KeyValuePair<int,LocalVariableTable> kvp in mProject.LvTables) {
if (kvp.Key > offset) {
break; // too far
}
bestOffset = kvp.Key;
}
Debug.Assert(bestOffset >= 0);
CreateOrEditLocalVariableTable(bestOffset);
}
private void CreateOrEditLocalVariableTable(int offset) {
// Get existing table, if any.
mProject.LvTables.TryGetValue(offset, out LocalVariableTable oldLvt);
EditLocalVariableTable dlg = new EditLocalVariableTable(mMainWin, mProject,
mOutputFormatter, oldLvt, offset);
if (dlg.ShowDialog() != true) {
return;
}
if (offset != dlg.NewOffset) {
// Table moved. We create two changes, one to delete the current table, one
// to create a new table.
Debug.Assert(!mProject.LvTables.TryGetValue(dlg.NewOffset,
out LocalVariableTable unused));
UndoableChange rem = UndoableChange.CreateLocalVariableTableChange(offset,
oldLvt, null);
UndoableChange add = UndoableChange.CreateLocalVariableTableChange(dlg.NewOffset,
null, dlg.NewTable);
ChangeSet cs = new ChangeSet(2);
cs.Add(rem);
cs.Add(add);
ApplyUndoableChanges(cs);
} else if (oldLvt != dlg.NewTable) {
// New table, edited in place, or deleted.
UndoableChange uc = UndoableChange.CreateLocalVariableTableChange(offset,
oldLvt, dlg.NewTable);
ChangeSet cs = new ChangeSet(uc);
ApplyUndoableChanges(cs);
} else {
Debug.WriteLine("LvTable unchanged");
}
}
public bool CanEditLongComment() {
if (SelectionAnalysis.mNumItemsSelected != 1) {
return false;
}
EntityCounts counts = SelectionAnalysis.mEntityCounts;
// Single line, code or data, or a long comment.
return (counts.mDataLines > 0 || counts.mCodeLines > 0 ||
SelectionAnalysis.mLineType == LineListGen.Line.Type.LongComment);
}
public void EditLongComment() {
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
int offset = CodeLineList[selIndex].FileOffset;
EditLongComment(offset);
}
private void EditLongComment(int offset) {
EditLongComment dlg = new EditLongComment(mMainWin, mOutputFormatter);
if (mProject.LongComments.TryGetValue(offset, out MultiLineComment oldComment)) {
dlg.LongComment = oldComment;
}
if (dlg.ShowDialog() != true) {
return;
}
MultiLineComment newComment = dlg.LongComment;
if (oldComment != newComment) {
Debug.WriteLine("Changing long comment at +" + offset.ToString("x6"));
UndoableChange uc = UndoableChange.CreateLongCommentChange(offset,
oldComment, newComment);
ChangeSet cs = new ChangeSet(uc);
ApplyUndoableChanges(cs);
}
}
public bool CanEditNote() {
if (SelectionAnalysis.mNumItemsSelected != 1) {
return false;
}
EntityCounts counts = SelectionAnalysis.mEntityCounts;
// Single line, code or data, or a note.
return (counts.mDataLines > 0 || counts.mCodeLines > 0 ||
SelectionAnalysis.mLineType == LineListGen.Line.Type.Note);
}
public void EditNote() {
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
int offset = CodeLineList[selIndex].FileOffset;
MultiLineComment oldNote;
if (!mProject.Notes.TryGetValue(offset, out oldNote)) {
oldNote = null;
}
EditNote dlg = new EditNote(mMainWin, oldNote);
dlg.ShowDialog();
if (dlg.DialogResult != true) {
return;
}
MultiLineComment newNote = dlg.Note;
if (oldNote != newNote) {
Debug.WriteLine("Changing note at +" + offset.ToString("x6"));
UndoableChange uc = UndoableChange.CreateNoteChange(offset,
oldNote, newNote);
ChangeSet cs = new ChangeSet(uc);
ApplyUndoableChanges(cs);
}
}
public bool CanEditOperand() {
if (SelectionAnalysis.mNumItemsSelected == 0) {
return false;
} else if (SelectionAnalysis.mNumItemsSelected == 1) {
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
int selOffset = CodeLineList[selIndex].FileOffset;
bool editInstr = (CodeLineList[selIndex].LineType == LineListGen.Line.Type.Code &&
mProject.GetAnattrib(selOffset).IsInstructionWithOperand);
bool editData = (CodeLineList[selIndex].LineType == LineListGen.Line.Type.Data);
return editInstr || editData;
} else {
// Data operands are one of the few things we can edit in bulk. It's okay
// if meta-data like ORGs and Notes are selected, but we don't allow it if
// any code is selected.
EntityCounts counts = SelectionAnalysis.mEntityCounts;
return (counts.mDataLines > 0 && counts.mCodeLines == 0);
}
}
public void EditOperand() {
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
int selOffset = CodeLineList[selIndex].FileOffset;
if (CodeLineList[selIndex].LineType == LineListGen.Line.Type.Code) {
EditInstructionOperand(selOffset);
} else {
// We allow the selection to include meta-data like .org and Notes.
//Debug.Assert(CodeLineList[selIndex].LineType == LineListGen.Line.Type.Data);
EditDataOperand(selOffset);
}
}
private void EditInstructionOperand(int offset) {
EditInstructionOperand dlg = new EditInstructionOperand(mMainWin, mProject,
offset, mOutputFormatter);
if (dlg.ShowDialog() != true) {
return;
}
ChangeSet cs = new ChangeSet(1);
mProject.OperandFormats.TryGetValue(offset, out FormatDescriptor dfd);
if (dlg.FormatDescriptorResult != dfd) {
UndoableChange uc = UndoableChange.CreateOperandFormatChange(offset,
dfd, dlg.FormatDescriptorResult);
cs.Add(uc);
} else {
Debug.WriteLine("No change to operand format");
}
// Check for changes to a local variable table. The edit dialog can't delete an
// entire table, so a null value here means no changes were made.
if (dlg.LocalVariableResult != null) {
int tableOffset = dlg.LocalVariableTableOffsetResult;
LocalVariableTable lvt = mProject.LvTables[tableOffset];
Debug.Assert(lvt != null); // cannot create a table either
UndoableChange uc = UndoableChange.CreateLocalVariableTableChange(tableOffset,
lvt, dlg.LocalVariableResult);
cs.Add(uc);
} else {
Debug.WriteLine("No change to LvTable");
}
// Check for changes to label at operand target address. Labels can be created,
// modified, or deleted.
if (dlg.SymbolEditOffsetResult >= 0) {
mProject.UserLabels.TryGetValue(dlg.SymbolEditOffsetResult, out Symbol oldLabel);
UndoableChange uc = UndoableChange.CreateLabelChange(dlg.SymbolEditOffsetResult,
oldLabel, dlg.SymbolEditResult);
cs.Add(uc);
} else {
Debug.WriteLine("No change to label");
}
// Check for changes to a project property. The dialog can create a new entry or
// modify an existing entry.
if (dlg.ProjectPropertyResult != null) {
DefSymbol oldSym = dlg.PrevProjectPropertyResult;
DefSymbol newSym = dlg.ProjectPropertyResult;
ProjectProperties newProps = new ProjectProperties(mProject.ProjectProps);
// Add new entry, or replace existing entry.
if (oldSym != null) {
newProps.ProjectSyms.Remove(oldSym.Label);
}
newProps.ProjectSyms.Add(newSym.Label, newSym);
UndoableChange uc = UndoableChange.CreateProjectPropertiesChange(
mProject.ProjectProps, newProps);
cs.Add(uc);
} else {
Debug.WriteLine("No change to project property");
}
Debug.WriteLine("EditInstructionOperand: " + cs.Count + " changes");
if (cs.Count != 0) {
ApplyUndoableChanges(cs);
}
}
private void EditDataOperand(int offset) {
Debug.Assert(mMainWin.CodeListView_GetSelectionCount() > 0);
TypedRangeSet trs = GroupedOffsetSetFromSelected();
if (trs.Count == 0) {
Debug.Assert(false, "EditDataOperand found nothing to edit"); // shouldn't happen
return;
}
// If the first offset has a FormatDescriptor, pass that in as a recommendation
// for the default value in the dialog. This allows single-item editing to work
// as expected. If the format can't be applied to the full selection (which
// would disable that radio button), the dialog will have to pick something
// that does work.
//
// We could pull this out of Anattribs, which would let the dialog reflect the
// auto-format that the user was just looking at. However, I think it's better
// if the dialog shows what's actually there, i.e. no formatting at all.
IEnumerator<TypedRangeSet.Tuple> iter =
(IEnumerator<TypedRangeSet.Tuple>)trs.GetEnumerator();
iter.MoveNext();
TypedRangeSet.Tuple firstOffset = iter.Current;
mProject.OperandFormats.TryGetValue(firstOffset.Value, out FormatDescriptor dfd);
EditDataOperand dlg = new EditDataOperand(mMainWin, mProject.FileData,
mProject.SymbolTable, mOutputFormatter, trs, dfd);
dlg.ShowDialog();
if (dlg.DialogResult == true) {
// Merge the changes into the OperandFormats list. We need to remove all
// FormatDescriptors that overlap the selected region. We don't need to
// pass the selection set in, because the dlg.Results list spans the exact
// set of ranges.
//
// If nothing actually changed, don't generate an undo record.
ChangeSet cs = mProject.GenerateFormatMergeSet(dlg.Results);
if (cs.Count != 0) {
ApplyUndoableChanges(cs);
} else {
Debug.WriteLine("No change to data formats");
}
}
}
public bool CanEditProjectSymbol() {
if (SelectionAnalysis.mNumItemsSelected != 1) {
return false;
}
if (SelectionAnalysis.mLineType != LineListGen.Line.Type.EquDirective) {
return false;
}
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
int symIndex = LineListGen.DefSymIndexFromOffset(CodeLineList[selIndex].FileOffset);
DefSymbol defSym = mProject.ActiveDefSymbolList[symIndex];
return (defSym.SymbolSource == Symbol.Source.Project);
}
public void EditProjectSymbol() {
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
int symIndex = LineListGen.DefSymIndexFromOffset(CodeLineList[selIndex].FileOffset);
DefSymbol origDefSym = mProject.ActiveDefSymbolList[symIndex];
Debug.Assert(origDefSym.SymbolSource == Symbol.Source.Project);
EditDefSymbol dlg = new EditDefSymbol(mMainWin, mOutputFormatter,
mProject.ProjectProps.ProjectSyms, origDefSym, null);
if (dlg.ShowDialog() == true) {
ProjectProperties newProps = new ProjectProperties(mProject.ProjectProps);
newProps.ProjectSyms.Remove(origDefSym.Label);
newProps.ProjectSyms[dlg.NewSym.Label] = dlg.NewSym;
UndoableChange uc = UndoableChange.CreateProjectPropertiesChange(
mProject.ProjectProps, newProps);
ChangeSet cs = new ChangeSet(uc);
ApplyUndoableChanges(cs);
}
}
public bool CanEditStatusFlags() {
if (SelectionAnalysis.mNumItemsSelected != 1) {
return false;
}
EntityCounts counts = SelectionAnalysis.mEntityCounts;
// Single line, must be code or a RegWidth directive.
return (SelectionAnalysis.mLineType == LineListGen.Line.Type.Code ||
SelectionAnalysis.mLineType == LineListGen.Line.Type.RegWidthDirective);
}
public void EditStatusFlags() {
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
int offset = CodeLineList[selIndex].FileOffset;
EditStatusFlags dlg = new EditStatusFlags(mMainWin,
mProject.StatusFlagOverrides[offset], mProject.CpuDef.HasEmuFlag);
if (dlg.ShowDialog() != true) {
return;
}
if (dlg.FlagValue != mProject.StatusFlagOverrides[offset]) {
UndoableChange uc = UndoableChange.CreateStatusFlagChange(offset,
mProject.StatusFlagOverrides[offset], dlg.FlagValue);
ChangeSet cs = new ChangeSet(uc);
ApplyUndoableChanges(cs);
}
}
public void EditProjectProperties() {
string projectDir = string.Empty;
if (!string.IsNullOrEmpty(mProjectPathName)) {
projectDir = Path.GetDirectoryName(mProjectPathName);
}
EditProjectProperties dlg = new EditProjectProperties(mMainWin, mProject.ProjectProps,
projectDir, mOutputFormatter);
dlg.ShowDialog();
ProjectProperties newProps = dlg.NewProps;
// The dialog result doesn't matter, because the user might have hit "apply"
// before hitting "cancel".
if (newProps != null) {
UndoableChange uc = UndoableChange.CreateProjectPropertiesChange(
mProject.ProjectProps, newProps);
ApplyUndoableChanges(new ChangeSet(uc));
}
}
public void Export() {
string outName;
if (string.IsNullOrEmpty(mProjectPathName)) {
outName = Path.GetFileName(mDataPathName);
} else {
outName = Path.GetFileName(mProjectPathName);
}
Export dlg = new Export(mMainWin, outName);
if (dlg.ShowDialog() == false) {
return;
}
int[] rightWidths = new int[] {
dlg.AsmLabelColWidth, dlg.AsmOpcodeColWidth,
dlg.AsmOperandColWidth, dlg.AsmCommentColWidth
};
Exporter eport = new Exporter(mProject, CodeLineList, mOutputFormatter,
dlg.ColFlags, rightWidths);
eport.IncludeNotes = dlg.IncludeNotes;
eport.LongLabelNewLine = dlg.LongLabelNewLine;
if (dlg.SelectionOnly) {
DisplayListSelection selection = mMainWin.CodeDisplayList.SelectedIndices;
if (selection.Count == 0) {
// no selection == select all
selection = null;
}
eport.Selection = selection;
}
// This is generally fast enough that I don't feel the need to create a
// progress window.
try {
Mouse.OverrideCursor = Cursors.Wait;
if (dlg.GenType == WpfGui.Export.GenerateFileType.Html) {
eport.OutputToHtml(dlg.PathName, dlg.OverwriteCss);
} else {
eport.OutputToText(dlg.PathName, dlg.TextModeCsv);
}
} finally {
Mouse.OverrideCursor = null;
}
}
public void Find() {
FindBox dlg = new FindBox(mMainWin, mFindString);
if (dlg.ShowDialog() == true) {
mFindString = dlg.TextToFind;
mFindStartIndex = -1;
FindText();
}
}
public void FindNext() {
FindText();
}
private void FindText() {
if (string.IsNullOrEmpty(mFindString)) {
return;
}
// Start from the topmost selected line, or the start of the file if nothing
// is selected.
int index = mMainWin.CodeListView_GetFirstSelectedIndex();
if (index < 0) {
index = 0;
}
// Start one past the selected item.
index++;
if (index == CodeLineList.Count) {
index = 0;
}
//Debug.WriteLine("FindText index=" + index + " start=" + mFindStartIndex +
// " str=" + mFindString);
while (index != mFindStartIndex) {
if (mFindStartIndex < 0) {
// need to latch this inside the loop so the initial test doesn't fail
mFindStartIndex = index;
}
string searchStr = CodeLineList.GetSearchString(index);
int matchPos = searchStr.IndexOf(mFindString,
StringComparison.InvariantCultureIgnoreCase);
if (matchPos >= 0) {
//Debug.WriteLine("Match " + index + ": " + searchStr);
mMainWin.CodeListView_EnsureVisible(index);
mMainWin.CodeListView_DeselectAll();
mMainWin.CodeListView_SelectRange(index, 1);
return;
}
index++;
if (index == CodeLineList.Count) {
index = 0;
}
}
// Announce that we've wrapped around, then clear the start index.
MessageBox.Show(Res.Strings.FIND_REACHED_START,
Res.Strings.FIND_REACHED_START_CAPTION, MessageBoxButton.OK,
MessageBoxImage.Information);
mFindStartIndex = -1;
mMainWin.CodeListView_Focus();
}
public bool CanFormatAsWord() {
EntityCounts counts = SelectionAnalysis.mEntityCounts;
// This is insufficient -- we need to know how many bytes are selected, and
// whether they're already formatted as multi-byte items. Too expensive to
// deal with here, so we'll need to show failure dialogs instead (ugh).
return (counts.mDataLines > 0 && counts.mCodeLines == 0);
}
public void FormatAsWord() {
TypedRangeSet trs = GroupedOffsetSetFromSelected();
if (trs.Count == 0) {
Debug.Assert(false, "nothing to edit"); // shouldn't happen
return;
}
// If the user has only selected a single byte, we want to add the following byte
// to the selection, then proceed as usual. We can't simply modify the ListView
// selection because the following item might be an auto-detected string or fill,
// and we'd be adding multiple bytes. We have to be careful when grabbing the byte
// in case there's a region-split at that point (e.g. user label or .ORG).
//
// We could expand this to allow multiple regions, each of which is a single byte,
// but we'd need to deal with the case where the user selects two adjacent bytes that
// cross a region boundary.
if (trs.RangeCount == 1) {
// Exactly one range entry. Check its size.
IEnumerator<TypedRangeSet.TypedRange> checkIter = trs.RangeListIterator;
checkIter.MoveNext();
TypedRangeSet.TypedRange rng = checkIter.Current;
if (rng.Low == rng.High && rng.Low < mProject.FileDataLength - 1) {
// Single byte selected. Check to see if it's okay to grab the next byte.
Anattrib thisAttr = mProject.GetAnattrib(rng.Low);
Debug.Assert(thisAttr.DataDescriptor.Length == 1);
int nextOffset = rng.Low + 1;
Anattrib nextAttr = mProject.GetAnattrib(nextOffset);
// This must match what GroupedOffsetSetFromSelected() does.
if (!mProject.UserLabels.ContainsKey(nextOffset) &&
!mProject.HasCommentOrNote(nextOffset) &&
thisAttr.Address == nextAttr.Address - 1) {
// Good to go.
Debug.WriteLine("Grabbing second byte from +" + nextOffset.ToString("x6"));
trs.Add(nextOffset, rng.Type);
}
}
}
// Confirm that every selected byte is a single-byte data item (either set by
// the user or as part of the uncategorized data scan).
foreach (TypedRangeSet.Tuple tup in trs) {
FormatDescriptor dfd = mProject.GetAnattrib(tup.Value).DataDescriptor;
if (dfd != null && dfd.Length != 1) {
Debug.WriteLine("Can't format as word: offset +" + tup.Value.ToString("x6") +
" has len=" + dfd.Length + " (must be 1)");
MessageBox.Show(Res.Strings.INVALID_FORMAT_WORD_SEL_NON1,
Res.Strings.INVALID_FORMAT_WORD_SEL_CAPTION,
MessageBoxButton.OK, MessageBoxImage.Error);
return;
}
}
// Confirm that, in each region, an even number of bytes are selected.
IEnumerator<TypedRangeSet.TypedRange> rngIter = trs.RangeListIterator;
while (rngIter.MoveNext()) {
TypedRangeSet.TypedRange rng = rngIter.Current;
int rangeLen = rng.High - rng.Low + 1;
if ((rangeLen & 0x01) != 0) {
string msg = string.Format(Res.Strings.INVALID_FORMAT_WORD_SEL_UNEVEN_FMT,
trs.RangeCount);
MessageBox.Show(msg,
Res.Strings.INVALID_FORMAT_WORD_SEL_CAPTION,
MessageBoxButton.OK, MessageBoxImage.Error);
return;
}
}
// Selection is good, generate changes.
SortedList<int, FormatDescriptor> newFmts = new SortedList<int, FormatDescriptor>();
rngIter.Reset();
FormatDescriptor newDfd = FormatDescriptor.Create(2, FormatDescriptor.Type.NumericLE,
FormatDescriptor.SubType.None);
while (rngIter.MoveNext()) {
TypedRangeSet.TypedRange rng = rngIter.Current;
for (int i = rng.Low; i <= rng.High; i += 2) {
newFmts.Add(i, newDfd);
}
}
ChangeSet cs = mProject.GenerateFormatMergeSet(newFmts);
if (cs.Count != 0) {
ApplyUndoableChanges(cs);
}
}
public bool CanFormatAddressTable() {
EntityCounts counts = SelectionAnalysis.mEntityCounts;
// Must be at least one line of data, and no code. Note this is lines, not bytes,
// so we can't screen out single-byte lines without additional work.
return (counts.mDataLines > 0 && counts.mCodeLines == 0);
}
public void FormatAddressTable() {
TypedRangeSet trs = GroupedOffsetSetFromSelected();
if (trs.Count == 0) {
// shouldn't happen
Debug.Assert(false, "FormatSplitAddressTable found nothing to edit");
return;
}
FormatAddressTable dlg = new FormatAddressTable(mMainWin, mProject, trs,
mOutputFormatter);
dlg.ShowDialog();
if (dlg.DialogResult != true) {
return;
}
// Start with the format descriptors.
ChangeSet cs = mProject.GenerateFormatMergeSet(dlg.NewFormatDescriptors);
// Add in the user labels.
foreach (KeyValuePair<int, Symbol> kvp in dlg.NewUserLabels) {
Symbol oldUserValue = null;
if (mProject.UserLabels.ContainsKey(kvp.Key)) {
Debug.Assert(false, "should not be replacing label");
oldUserValue = mProject.UserLabels[kvp.Key];
}
UndoableChange uc = UndoableChange.CreateLabelChange(kvp.Key,
oldUserValue, kvp.Value);
cs.Add(uc);
}
// Apply code hints.
if (dlg.WantCodeHints) {
TypedRangeSet newSet = new TypedRangeSet();
TypedRangeSet undoSet = new TypedRangeSet();
foreach (int offset in dlg.AllTargetOffsets) {
if (!mProject.GetAnattrib(offset).IsInstruction) {
CodeAnalysis.TypeHint oldType = mProject.TypeHints[offset];
if (oldType == CodeAnalysis.TypeHint.Code) {
continue; // already set
}
undoSet.Add(offset, (int)oldType);
newSet.Add(offset, (int)CodeAnalysis.TypeHint.Code);
}
}
if (newSet.Count != 0) {
cs.Add(UndoableChange.CreateTypeHintChange(undoSet, newSet));
}
}
// Finally, apply the change.
if (cs.Count != 0) {
ApplyUndoableChanges(cs);
} else {
Debug.WriteLine("No changes found");
}
}
public void Goto() {
GotoBox dlg = new GotoBox(mMainWin, mProject, mOutputFormatter);
if (dlg.ShowDialog() == true) {
GoToOffset(dlg.TargetOffset, false, true);
mMainWin.CodeListView_Focus();
}
}
/// <summary>
/// Moves the view and selection to the specified offset. We want to select stuff
/// differently if we're jumping to a note vs. jumping to an instruction.
/// </summary>
/// <param name="gotoOffset">Offset to jump to.</param>
/// <param name="doPush">If set, push new offset onto navigation stack.</param>
public void GoToOffset(int gotoOffset, bool jumpToNote, bool doPush) {
NavStack.Location prevLoc = GetCurrentlySelectedLocation();
if (gotoOffset == prevLoc.Offset && jumpToNote == prevLoc.IsNote) {
// we're jumping to ourselves?
Debug.WriteLine("Ignoring goto to current position");
return;
}
int topLineIndex = CodeLineList.FindLineIndexByOffset(gotoOffset);
if (topLineIndex < 0) {
Debug.Assert(false, "failed goto offset +" + gotoOffset.ToString("x6"));
return;
}
int lastLineIndex;
if (jumpToNote) {
// Select all note lines, disregard the rest.
while (CodeLineList[topLineIndex].LineType != LineListGen.Line.Type.Note) {
topLineIndex++;
Debug.Assert(CodeLineList[topLineIndex].FileOffset == gotoOffset);
}
lastLineIndex = topLineIndex + 1;
while (lastLineIndex < CodeLineList.Count &&
CodeLineList[lastLineIndex].LineType == LineListGen.Line.Type.Note) {
lastLineIndex++;
}
} else if (gotoOffset < 0) {
// This is the offset of the header comment or a .EQ directive. Don't mess with it.
lastLineIndex = topLineIndex + 1;
} else {
// Advance to the code or data line.
while (CodeLineList[topLineIndex].LineType != LineListGen.Line.Type.Code &&
CodeLineList[topLineIndex].LineType != LineListGen.Line.Type.Data) {
topLineIndex++;
}
lastLineIndex = topLineIndex + 1;
}
// Make sure the item is visible. For notes, this can span multiple lines.
mMainWin.CodeListView_EnsureVisible(lastLineIndex - 1);
mMainWin.CodeListView_EnsureVisible(topLineIndex);
// Update the selection.
mMainWin.CodeListView_DeselectAll();
mMainWin.CodeListView_SelectRange(topLineIndex, lastLineIndex - topLineIndex);
if (doPush) {
// Update the back stack and associated controls.
mNavStack.Push(prevLoc);
}
}
/// <summary>
/// Moves the view and selection to the definition of a local variable.
/// </summary>
/// <param name="offset">Offset at which the variable was referenced.</param>
/// <param name="symRef">Reference to variable.</param>
public void GoToVarDefinition(int offset, WeakSymbolRef symRef, bool doPush) {
Debug.Assert(offset >= 0);
Debug.Assert(symRef.IsVariable);
LocalVariableLookup lvLookup = new LocalVariableLookup(mProject.LvTables, mProject,
false);
int varOffset = lvLookup.GetDefiningTableOffset(offset, symRef);
if (varOffset <= 0) {
Debug.WriteLine("Local variable not found; offset=" + offset + " ref=" + symRef);
return;
}
// We have the offset to which the local variable table is bound. We need to
// walk down until we find the variable definitions, and find the line with the
// matching symbol.
//
// We're comparing to the formatted strings -- safer than trying to find the symbol
// in the table and then guess at how the table arranges itself for display -- so we
// need to compare the formatted form of the label.
string cmpStr = mOutputFormatter.FormatVariableLabel(symRef.Label);
int lineIndex = CodeLineList.FindLineIndexByOffset(varOffset);
while (lineIndex < mProject.FileDataLength) {
LineListGen.Line line = CodeLineList[lineIndex];
if (line.FileOffset != varOffset) {
// we've gone too far
Debug.WriteLine("ran out of LV table");
return;
}
if (line.LineType == LineListGen.Line.Type.LocalVariableTable) {
DisplayList.FormattedParts parts = CodeLineList.GetFormattedParts(lineIndex);
if (cmpStr.Equals(parts.Label)) {
// Eureka
NavStack.Location prevLoc = GetCurrentlySelectedLocation();
mMainWin.CodeListView_EnsureVisible(lineIndex);
// Update the selection.
mMainWin.CodeListView_DeselectAll();
mMainWin.CodeListView_SelectRange(lineIndex, 1);
if (doPush) {
// Update the back stack and associated controls.
mNavStack.Push(prevLoc);
}
return;
} else {
//Debug.WriteLine("Var: '" + cmpStr + "' != '" + parts.Label + "'");
}
}
lineIndex++;
}
}
private NavStack.Location GetCurrentlySelectedLocation() {
int index = mMainWin.CodeListView_GetFirstSelectedIndex();
if (index < 0) {
// nothing selected, use top instead
index = mMainWin.CodeListView_GetTopIndex();
}
int offset = CodeLineList[index].FileOffset;
bool isNote = (CodeLineList[index].LineType == LineListGen.Line.Type.Note);
return new NavStack.Location(offset, isNote);
}
public bool CanNavigateBackward() {
return mNavStack.HasBackward;
}
public void NavigateBackward() {
Debug.Assert(mNavStack.HasBackward);
NavStack.Location backLoc = mNavStack.MoveBackward(GetCurrentlySelectedLocation());
GoToOffset(backLoc.Offset, backLoc.IsNote, false);
}
public bool CanNavigateForward() {
return mNavStack.HasForward;
}
public void NavigateForward() {
Debug.Assert(mNavStack.HasForward);
NavStack.Location fwdLoc = mNavStack.MoveForward(GetCurrentlySelectedLocation());
GoToOffset(fwdLoc.Offset, fwdLoc.IsNote, false);
}
/// <summary>
/// Scrolls the code list so that the specified label is shown.
/// </summary>
/// <param name="sym">Label symbol.</param>
public void GoToLabel(Symbol sym) {
if (sym.IsInternalLabel) {
int offset = mProject.FindLabelOffsetByName(sym.Label);
if (offset >= 0) {
GoToOffset(offset, false, true);
} else {
Debug.WriteLine("DClick symbol: " + sym + ": label not found");
}
} else {
Debug.WriteLine("DClick symbol: " + sym + ": not label");
}
}
public void SelectionChanged() {
SelectionAnalysis = UpdateSelectionState();
UpdateReferencesPanel();
UpdateInfoPanel();
UpdateSelectionHighlight();
}
/// <summary>
/// Gathered facts about the current selection. Recalculated whenever the selection
/// changes.
/// </summary>
public class SelectionState {
// Number of selected items or lines, reduced. This will be:
// 0 if no lines are selected
// 1 if a single *item* is selected (regardless of number of lines)
// >1 if more than one item is selected (exact value not specified)
public int mNumItemsSelected;
// Single selection: the type of line selected. (Multi-sel: Unclassified)
public LineListGen.Line.Type mLineType;
// Single selection: is line an instruction with an operand. (Multi-sel: False)
public bool mIsInstructionWithOperand;
// Single selection: is line an EQU directive for a project symbol. (Multi-sel: False)
public bool mIsProjectSymbolEqu;
// Some totals.
public EntityCounts mEntityCounts;
public SelectionState() {
mLineType = LineListGen.Line.Type.Unclassified;
mEntityCounts = new EntityCounts();
}
}
/// <summary>
/// Updates Actions menu enable states when the selection changes.
/// </summary>
/// is selected.</param>
public SelectionState UpdateSelectionState() {
int selCount = mMainWin.CodeListView_GetSelectionCount();
//Debug.WriteLine("UpdateSelectionState: selCount=" + selCount);
SelectionState state = new SelectionState();
// Use IsSingleItemSelected(), rather than just checking sel.Count, because we
// want the user to be able to e.g. EditData on a multi-line string even if all
// lines in the string are selected.
if (selCount < 0) {
// nothing selected, leave everything set to false / 0
state.mEntityCounts = new EntityCounts();
} else if (IsSingleItemSelected()) {
int firstIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
state.mNumItemsSelected = 1;
state.mEntityCounts = GatherEntityCounts(firstIndex);
LineListGen.Line line = CodeLineList[firstIndex];
state.mLineType = line.LineType;
state.mIsInstructionWithOperand = (line.LineType == LineListGen.Line.Type.Code &&
mProject.GetAnattrib(line.FileOffset).IsInstructionWithOperand);
if (line.LineType == LineListGen.Line.Type.EquDirective) {
// See if this EQU directive is for a project symbol.
int symIndex = LineListGen.DefSymIndexFromOffset(line.FileOffset);
DefSymbol defSym = mProject.ActiveDefSymbolList[symIndex];
state.mIsProjectSymbolEqu = (defSym.SymbolSource == Symbol.Source.Project);
}
} else {
state.mNumItemsSelected = 2;
state.mEntityCounts = GatherEntityCounts(-1);
}
return state;
}
/// <summary>
/// Entity count collection, for GatherEntityCounts.
/// </summary>
public class EntityCounts {
public int mCodeLines;
public int mDataLines;
public int mBlankLines;
public int mControlLines;
public int mCodeHints;
public int mDataHints;
public int mInlineDataHints;
public int mNoHints;
};
/// <summary>
/// Gathers a count of different line types and hints that are currently selected.
/// </summary>
/// <param name="singleLineIndex">If a single line is selected, pass the index in.
/// Otherwise, pass -1 to traverse the entire line list.</param>
/// <returns>Object with computed totals.</returns>
private EntityCounts GatherEntityCounts(int singleLineIndex) {
//DateTime startWhen = DateTime.Now;
int codeLines, dataLines, blankLines, controlLines;
int codeHints, dataHints, inlineDataHints, noHints;
codeLines = dataLines = blankLines = controlLines = 0;
codeHints = dataHints = inlineDataHints = noHints = 0;
int startIndex, endIndex;
if (singleLineIndex < 0) {
startIndex = 0;
endIndex = mMainWin.CodeDisplayList.Count - 1;
} else {
startIndex = endIndex = singleLineIndex;
}
for (int i = startIndex; i <= endIndex; i++) {
if (!mMainWin.CodeDisplayList.SelectedIndices[i]) {
// not selected, ignore
continue;
}
LineListGen.Line line = CodeLineList[i];
switch (line.LineType) {
case LineListGen.Line.Type.Code:
codeLines++;
break;
case LineListGen.Line.Type.Data:
dataLines++;
break;
case LineListGen.Line.Type.Blank:
// Don't generally care how many blank lines there are, but we do want
// to exclude them from the other categories: if we have nothing but
// blank lines, there's nothing to do.
blankLines++;
break;
default:
// These are only editable as single-line items. We do allow mass
// code hint selection to include them (they will be ignored).
// org, equ, rwid, long comment...
controlLines++;
break;
}
// A single line can span multiple offsets, each of which could have a
// different hint. Note the code/data hints are only applied to the first
// byte of each selected line, so we're not quite in sync with that.
//
// For multi-line items, the OffsetSpan of the first item covers the entire
// item (it's the same for all Line instances), so we only want to do this for
// the first entry.
if (line.SubLineIndex == 0) {
for (int offset = line.FileOffset; offset < line.FileOffset + line.OffsetSpan;
offset++) {
switch (mProject.TypeHints[offset]) {
case CodeAnalysis.TypeHint.Code:
codeHints++;
break;
case CodeAnalysis.TypeHint.Data:
dataHints++;
break;
case CodeAnalysis.TypeHint.InlineData:
inlineDataHints++;
break;
case CodeAnalysis.TypeHint.NoHint:
noHints++;
break;
default:
Debug.Assert(false);
break;
}
}
}
}
//Debug.WriteLine("GatherEntityCounts (start=" + startIndex + " end=" + endIndex +
// " len=" + mMainWin.CodeDisplayList.Count +
// ") took " + (DateTime.Now - startWhen).TotalMilliseconds + " ms");
return new EntityCounts() {
mCodeLines = codeLines,
mDataLines = dataLines,
mBlankLines = blankLines,
mControlLines = controlLines,
mCodeHints = codeHints,
mDataHints = dataHints,
mInlineDataHints = inlineDataHints,
mNoHints = noHints
};
}
/// <summary>
/// Determines whether the current selection spans a single item. This could be a
/// single-line item or a multi-line item.
/// </summary>
private bool IsSingleItemSelected() {
int firstIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
if (firstIndex < 0) {
// empty selection
return false;
}
int lastIndex = mMainWin.CodeListView_GetLastSelectedIndex();
if (lastIndex == firstIndex) {
// only one line is selected
return true;
}
// Just check the first and last entries to see if they're the same.
LineListGen.Line firstItem = CodeLineList[firstIndex];
LineListGen.Line lastItem = CodeLineList[lastIndex];
if (firstItem.FileOffset == lastItem.FileOffset &&
firstItem.LineType == lastItem.LineType) {
return true;
}
return false;
}
private bool mUpdatingSelectionHighlight; // recursion guard
/// <summary>
/// Updates the selection highlight. When a code item with an operand offset is
/// selected, such as a branch, we want to highlight the address and label of the
/// target.
/// </summary>
private void UpdateSelectionHighlight() {
int targetIndex = FindSelectionHighlight();
if (mTargetHighlightIndex != targetIndex && !mUpdatingSelectionHighlight) {
Debug.WriteLine("Target highlight moving from " + mTargetHighlightIndex +
" to " + targetIndex);
// The highlight is currently implemented by modifying the item in the
// display list. Because those items are immutable, we have to remove the
// old and add a new. The WPF ListView maintains its selection by object
// reference, so replacing an item requires removing the old item from the
// selection set and adding it to the new.
//
// So if a line references itself (like the ZipGS cache conditioner loop does),
// it will be the selected line while we're doing this little dance. When the
// calls below update the selection, this method will be called again. This
// turns into infinite recursion.
mUpdatingSelectionHighlight = true;
mMainWin.CodeListView_RemoveSelectionHighlight(mTargetHighlightIndex);
mMainWin.CodeListView_AddSelectionHighlight(targetIndex);
mUpdatingSelectionHighlight = false;
mTargetHighlightIndex = targetIndex;
}
}
private int FindSelectionHighlight() {
if (mMainWin.CodeListView_GetSelectionCount() != 1) {
return -1;
}
int selIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
LineListGen.Line line = CodeLineList[selIndex];
if (!line.IsCodeOrData) {
return -1;
}
Debug.Assert(line.FileOffset >= 0);
// Does this have an operand with an in-file target offset?
Anattrib attr = mProject.GetAnattrib(line.FileOffset);
if (attr.OperandOffset >= 0) {
return CodeLineList.FindCodeDataIndexByOffset(attr.OperandOffset);
} else if (attr.IsDataStart || attr.IsInlineDataStart) {
// If it's an Address or Symbol, we can try to resolve
// the value.
int operandOffset = DataAnalysis.GetDataOperandOffset(mProject, line.FileOffset);
if (operandOffset >= 0) {
return CodeLineList.FindCodeDataIndexByOffset(operandOffset);
}
}
return -1;
}
public void ShowFileHexDump() {
OpenFileDialog fileDlg = new OpenFileDialog() {
Filter = Res.Strings.FILE_FILTER_ALL,
FilterIndex = 1
};
if (fileDlg.ShowDialog() != true) {
return;
}
string fileName = fileDlg.FileName;
FileInfo fi = new FileInfo(fileName);
if (fi.Length > Tools.WpfGui.HexDumpViewer.MAX_LENGTH) {
string msg = string.Format(Res.Strings.OPEN_DATA_TOO_LARGE_FMT,
fi.Length / 1024, Tools.WpfGui.HexDumpViewer.MAX_LENGTH / 1024);
MessageBox.Show(msg, Res.Strings.OPEN_DATA_FAIL_CAPTION,
MessageBoxButton.OK, MessageBoxImage.Error);
return;
}
byte[] data;
try {
data = File.ReadAllBytes(fileName);
} catch (Exception ex) {
// not expecting this to happen
MessageBox.Show(ex.Message);
return;
}
// Create the dialog without an owner, and add it to the "unowned" list.
Tools.WpfGui.HexDumpViewer dlg = new Tools.WpfGui.HexDumpViewer(null,
data, mOutputFormatter);
dlg.SetFileName(Path.GetFileName(fileName));
dlg.Closing += (sender, e) => {
Debug.WriteLine("Window " + dlg + " closed, removing from unowned list");
mUnownedWindows.Remove(dlg);
};
mUnownedWindows.Add(dlg);
dlg.Show();
}
public void ShowHexDump() {
if (mHexDumpDialog == null) {
// Create and show modeless dialog. This one is "always on top" by default,
// to allow the user to click around to various points. Note that "on top"
// means on top of *everything*. We create this without an owner so that,
// when it's not on top, it can sit behind the main app window until you
// double-click something else.
mHexDumpDialog = new Tools.WpfGui.HexDumpViewer(null,
mProject.FileData, mOutputFormatter);
mHexDumpDialog.Closing += (sender, e) => {
Debug.WriteLine("Hex dump dialog closed");
//showHexDumpToolStripMenuItem.Checked = false;
mHexDumpDialog = null;
};
mHexDumpDialog.Topmost = true;
mHexDumpDialog.Show();
}
// Bring it to the front of the window stack. This also transfers focus to the
// window.
mHexDumpDialog.Activate();
// Set the dialog's position.
if (mMainWin.CodeListView_GetSelectionCount() > 0) {
int firstIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
int lastIndex = mMainWin.CodeListView_GetLastSelectedIndex();
// offsets can be < 0 if they've selected EQU statements
int firstOffset = Math.Max(0, CodeLineList[firstIndex].FileOffset);
int lastOffset = Math.Max(firstOffset, CodeLineList[lastIndex].FileOffset +
CodeLineList[lastIndex].OffsetSpan - 1);
mHexDumpDialog.ShowOffsetRange(firstOffset, lastOffset);
}
}
/// <summary>
/// Handles the four Actions - edit hint commands.
/// </summary>
/// <param name="hint">Type of hint to apply.</param>
/// <param name="firstByteOnly">If set, only the first byte on each line is hinted.</param>
public void MarkAsType(CodeAnalysis.TypeHint hint, bool firstByteOnly) {
RangeSet sel;
if (firstByteOnly) {
sel = new RangeSet();
foreach (int index in mMainWin.CodeDisplayList.SelectedIndices) {
int offset = CodeLineList[index].FileOffset;
if (offset >= 0) {
// Not interested in the header stuff for hinting.
sel.Add(offset);
}
}
} else {
sel = OffsetSetFromSelected();
}
TypedRangeSet newSet = new TypedRangeSet();
TypedRangeSet undoSet = new TypedRangeSet();
foreach (int offset in sel) {
if (offset < 0) {
// header comment
continue;
}
CodeAnalysis.TypeHint oldType = mProject.TypeHints[offset];
if (oldType == hint) {
// no change, don't add to set
continue;
}
undoSet.Add(offset, (int)oldType);
newSet.Add(offset, (int)hint);
}
if (newSet.Count == 0) {
Debug.WriteLine("No changes found (" + hint + ", " + sel.Count + " offsets)");
return;
}
UndoableChange uc = UndoableChange.CreateTypeHintChange(undoSet, newSet);
ChangeSet cs = new ChangeSet(uc);
ApplyUndoableChanges(cs);
}
/// <summary>
/// Converts the set of selected items into a set of offsets. If a line
/// spans multiple offsets (e.g. a 3-byte instruction), offsets for every
/// byte are included.
///
/// Boundaries such as labels and address changes are ignored.
/// </summary>
/// <returns>RangeSet with all offsets.</returns>
private RangeSet OffsetSetFromSelected() {
RangeSet rs = new RangeSet();
foreach (int index in mMainWin.CodeDisplayList.SelectedIndices) {
int offset = CodeLineList[index].FileOffset;
// Mark every byte of an instruction or multi-byte data item --
// everything that is represented by the line the user selected.
int len;
if (offset >= 0) {
len = mProject.GetAnattrib(offset).Length;
} else {
// header area
len = 1;
}
Debug.Assert(len > 0);
for (int i = offset; i < offset + len; i++) {
rs.Add(i);
}
}
return rs;
}
/// <summary>
/// Handles Help - Help
/// </summary>
public void ShowHelp() {
HelpAccess.ShowHelp(HelpAccess.Topic.Contents);
}
/// <summary>
/// Handles Help - About
/// </summary>
public void ShowAboutBox() {
AboutBox dlg = new AboutBox(mMainWin);
dlg.ShowDialog();
}
public void ToggleAsciiChart() {
if (mAsciiChartDialog == null) {
// Create without owner so it doesn't have to be in front of main window.
mAsciiChartDialog = new Tools.WpfGui.AsciiChart(null);
mAsciiChartDialog.Closing += (sender, e) => {
Debug.WriteLine("ASCII chart closed");
mAsciiChartDialog = null;
};
mAsciiChartDialog.Show();
} else {
mAsciiChartDialog.Close();
}
}
public void ToggleDataScan() {
ProjectProperties oldProps = mProject.ProjectProps;
ProjectProperties newProps = new ProjectProperties(oldProps);
newProps.AnalysisParams.AnalyzeUncategorizedData =
!newProps.AnalysisParams.AnalyzeUncategorizedData;
UndoableChange uc = UndoableChange.CreateProjectPropertiesChange(oldProps, newProps);
ApplyUndoableChanges(new ChangeSet(uc));
}
public bool CanToggleSingleByteFormat() {
EntityCounts counts = SelectionAnalysis.mEntityCounts;
return (counts.mDataLines > 0 && counts.mCodeLines == 0);
}
public void ToggleSingleByteFormat() {
TypedRangeSet trs = GroupedOffsetSetFromSelected();
if (trs.Count == 0) {
Debug.Assert(false, "nothing to edit"); // shouldn't happen
return;
}
// Check the format descriptor of the first selected offset.
int firstOffset = -1;
foreach (TypedRangeSet.Tuple tup in trs) {
firstOffset = tup.Value;
break;
}
Debug.Assert(mProject.GetAnattrib(firstOffset).IsDataStart);
bool toDefault = false;
if (mProject.OperandFormats.TryGetValue(firstOffset, out FormatDescriptor curDfd)) {
if (curDfd.FormatType == FormatDescriptor.Type.NumericLE &&
curDfd.FormatSubType == FormatDescriptor.SubType.None &&
curDfd.Length == 1) {
// Currently single-byte, toggle to default.
toDefault = true;
}
}
// Iterate through the selected regions.
SortedList<int, FormatDescriptor> newFmts = new SortedList<int, FormatDescriptor>();
IEnumerator<TypedRangeSet.TypedRange> rngIter = trs.RangeListIterator;
while (rngIter.MoveNext()) {
TypedRangeSet.TypedRange rng = rngIter.Current;
if (toDefault) {
// Create a single REMOVE descriptor that covers the full span.
FormatDescriptor newDfd = FormatDescriptor.Create(rng.High - rng.Low + 1,
FormatDescriptor.Type.REMOVE, FormatDescriptor.SubType.None);
newFmts.Add(rng.Low, newDfd);
} else {
// Add individual single-byte format descriptors for everything.
FormatDescriptor newDfd = FormatDescriptor.Create(1,
FormatDescriptor.Type.NumericLE, FormatDescriptor.SubType.None);
for (int i = rng.Low; i <= rng.High; i++) {
newFmts.Add(i, newDfd);
}
}
}
ChangeSet cs = mProject.GenerateFormatMergeSet(newFmts);
if (cs.Count != 0) {
ApplyUndoableChanges(cs);
}
}
/// <summary>
/// Converts the ListView's selected items into a set of offsets. If a line
/// spans multiple offsets (e.g. a 3-byte instruction), offsets for every
/// byte are included.
///
/// Contiguous regions with user labels or address changes are split into
/// independent regions by using a serial number for the range type. Same for
/// long comments and notes.
///
/// We don't split based on existing data format items. That would make it impossible
/// to convert from (say) a collection of single bytes to a collection of double bytes
/// or a string. It should not be possible to select part of a formatted section,
/// unless the user has been playing weird games with type hints to get overlapping
/// format descriptors.
/// </summary>
/// <returns>TypedRangeSet with all offsets.</returns>
private TypedRangeSet GroupedOffsetSetFromSelected() {
TypedRangeSet rs = new TypedRangeSet();
int groupNum = 0;
int expectedAddr = -1;
DateTime startWhen = DateTime.Now;
int prevOffset = -1;
foreach (int index in mMainWin.CodeDisplayList.SelectedIndices) {
// Don't add an offset to the set if the only part of it that is selected
// is a directive or blank line. We only care about file offsets, so skip
// anything that isn't code or data.
if (!CodeLineList[index].IsCodeOrData) {
continue;
}
int offset = CodeLineList[index].FileOffset;
if (offset == prevOffset) {
// This is a continuation of a multi-line item like a string. We've
// already accounted for all bytes associated with this offset.
continue;
}
Anattrib attr = mProject.GetAnattrib(offset);
if (expectedAddr == -1) {
expectedAddr = attr.Address;
}
// Check for user labels.
if (mProject.UserLabels.ContainsKey(offset)) {
//if (mProject.GetAnattrib(offset).Symbol != null) {
// We consider auto labels when splitting regions for the data analysis,
// but I don't think we want to take them into account here. The specific
// example that threw me was loading a 16-bit value from an address table.
// The code does "LDA table,X / STA / LDA table+1,X / STA", which puts auto
// labels at the first two addresses -- splitting the region. That's good
// for the uncategorized data analyzer, but very annoying if you want to
// slap a 16-bit numeric format on all entries in a table.
groupNum++;
} else if (mProject.HasCommentOrNote(offset)) {
// Don't carry across a long comment or note.
groupNum++;
} else if (attr.Address != expectedAddr) {
// For a contiguous selection, this should only happen if there's a .ORG
// address change. For non-contiguous selection this is expected. In the
// latter case, incrementing the group number is unnecessary but harmless.
Debug.WriteLine("Address break: " + attr.Address + " vs. " + expectedAddr);
//Debug.Assert(mProject.AddrMap.Get(offset) >= 0);
expectedAddr = attr.Address;
groupNum++;
}
// Mark every byte of an instruction or multi-byte data item --
// everything that is represented by the line the user selected. Control
// statements and blank lines aren't relevant here, as we only care about
// file offsets.
int len = CodeLineList[index].OffsetSpan; // attr.Length;
Debug.Assert(len > 0);
for (int i = offset; i < offset + len; i++) {
rs.Add(i, groupNum);
}
// Advance the address.
expectedAddr += len;
prevOffset = offset;
}
Debug.WriteLine("Offset selection conv took " +
(DateTime.Now - startWhen).TotalMilliseconds + " ms");
return rs;
}
#endregion Main window UI event handlers
#region References panel
/// <summary>
/// Updates the "references" panel to reflect the current selection.
///
/// The number of references to any given address should be relatively small, and
/// won't change without a data refresh, so recreating the list every time shouldn't
/// be a problem.
/// </summary>
private void UpdateReferencesPanel() {
mMainWin.ReferencesList.Clear();
if (mMainWin.CodeListView_GetSelectionCount() != 1) {
// Nothing selected, or multiple lines selected.
return;
}
int lineIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
LineListGen.Line.Type type = CodeLineList[lineIndex].LineType;
if (type != LineListGen.Line.Type.Code &&
type != LineListGen.Line.Type.Data &&
type != LineListGen.Line.Type.EquDirective &&
type != LineListGen.Line.Type.LocalVariableTable) {
// Code, data, and platform symbol EQUs have xrefs.
return;
}
XrefSet xrefs;
// Find the appropriate xref set.
if (type == LineListGen.Line.Type.LocalVariableTable) {
DefSymbol defSym = CodeLineList.GetLocalVariableFromLine(lineIndex);
xrefs = (defSym == null) ? null : defSym.Xrefs;
} else {
int offset = CodeLineList[lineIndex].FileOffset;
if (offset < 0) {
// EQU in header
int index = LineListGen.DefSymIndexFromOffset(offset);
DefSymbol defSym = mProject.ActiveDefSymbolList[index];
xrefs = defSym.Xrefs;
} else {
xrefs = mProject.GetXrefSet(offset);
}
}
if (xrefs == null || xrefs.Count == 0) {
return;
}
// TODO(someday): localization
Asm65.Formatter formatter = mOutputFormatter;
bool showBank = !mProject.CpuDef.HasAddr16;
for (int i = 0; i < xrefs.Count; i++) {
XrefSet.Xref xr = xrefs[i];
string typeStr;
switch (xr.Type) {
case XrefSet.XrefType.SubCallOp:
typeStr = "call ";
break;
case XrefSet.XrefType.BranchOp:
typeStr = "branch ";
break;
case XrefSet.XrefType.RefFromData:
typeStr = "data ";
break;
case XrefSet.XrefType.MemAccessOp:
switch (xr.AccType) {
case OpDef.MemoryEffect.Read:
typeStr = "read ";
break;
case OpDef.MemoryEffect.Write:
typeStr = "write ";
break;
case OpDef.MemoryEffect.ReadModifyWrite:
typeStr = "rmw ";
break;
case OpDef.MemoryEffect.None: // e.g. LDA #<symbol, PEA addr
typeStr = "ref ";
break;
case OpDef.MemoryEffect.Unknown:
default:
Debug.Assert(false);
typeStr = "??! ";
break;
}
break;
default:
Debug.Assert(false);
typeStr = "??? ";
break;
}
MainWindow.ReferencesListItem rli = new MainWindow.ReferencesListItem(xr.Offset,
formatter.FormatOffset24(xr.Offset),
formatter.FormatAddress(mProject.GetAnattrib(xr.Offset).Address, showBank),
(xr.IsByName ? "Sym " : "Oth ") + typeStr +
formatter.FormatAdjustment(-xr.Adjustment));
mMainWin.ReferencesList.Add(rli);
}
}
public bool CanUndo() {
return (mProject != null && mProject.CanUndo);
}
/// <summary>
/// Handles Edit - Undo.
/// </summary>
public void UndoChanges() {
if (!mProject.CanUndo) {
Debug.Assert(false, "Nothing to undo");
return;
}
ChangeSet cs = mProject.PopUndoSet();
ApplyChanges(cs, true);
UpdateTitle();
// If the debug dialog is visible, update it.
if (mShowUndoRedoHistoryDialog != null) {
mShowUndoRedoHistoryDialog.DisplayText = mProject.DebugGetUndoRedoHistory();
}
}
public bool CanRedo() {
return (mProject != null && mProject.CanRedo);
}
/// <summary>
/// Handles Edit - Redo.
/// </summary>
public void RedoChanges() {
if (!mProject.CanRedo) {
Debug.Assert(false, "Nothing to redo");
return;
}
ChangeSet cs = mProject.PopRedoSet();
ApplyChanges(cs, false);
UpdateTitle();
// If the debug dialog is visible, update it.
if (mShowUndoRedoHistoryDialog != null) {
mShowUndoRedoHistoryDialog.DisplayText = mProject.DebugGetUndoRedoHistory();
}
}
#endregion References panel
#region Notes panel
private void PopulateNotesList() {
mMainWin.NotesList.Clear();
foreach (KeyValuePair<int, MultiLineComment> kvp in mProject.Notes) {
int offset = kvp.Key;
MultiLineComment mlc = kvp.Value;
// Replace line break with bullet. If there's a single CRLF at the end, strip it.
string nocrlfStr;
if (mlc.Text.EndsWith("\r\n")) {
nocrlfStr =
mlc.Text.Substring(0, mlc.Text.Length - 2).Replace("\r\n", " \u2022 ");
} else {
nocrlfStr = mlc.Text.Replace("\r\n", " \u2022 ");
}
MainWindow.NotesListItem nli = new MainWindow.NotesListItem(offset,
mOutputFormatter.FormatOffset24(offset),
nocrlfStr,
mlc.BackgroundColor);
mMainWin.NotesList.Add(nli);
}
}
#endregion Notes panel
#region Symbols panel
private void PopulateSymbolsList() {
mMainWin.SymbolsList.Clear();
foreach (Symbol sym in mProject.SymbolTable) {
MainWindow.SymbolsListItem sli = new MainWindow.SymbolsListItem(sym,
sym.SourceTypeString,
mOutputFormatter.FormatHexValue(sym.Value, 0),
sym.Label);
mMainWin.SymbolsList.Add(sli);
}
}
#endregion Symbols panel
#region Info panel
private void UpdateInfoPanel() {
if (mMainWin.CodeListView_GetSelectionCount() != 1) {
// Nothing selected, or multiple lines selected.
mMainWin.InfoPanelContents = string.Empty;
return;
}
int lineIndex = mMainWin.CodeListView_GetFirstSelectedIndex();
LineListGen.Line line = CodeLineList[lineIndex];
StringBuilder sb = new StringBuilder(250);
// TODO(someday): this should be made easier to localize
string lineTypeStr;
string extraStr = string.Empty;
switch (line.LineType) {
case LineListGen.Line.Type.Code:
lineTypeStr = "code";
break;
case LineListGen.Line.Type.Data:
if (mProject.GetAnattrib(line.FileOffset).IsInlineData) {
lineTypeStr = "inline data";
} else {
lineTypeStr = "data";
}
break;
case LineListGen.Line.Type.LongComment:
lineTypeStr = "comment";
break;
case LineListGen.Line.Type.Note:
lineTypeStr = "note";
break;
case LineListGen.Line.Type.Blank:
lineTypeStr = "blank line";
//lineTypeStr = "blank line (+" +
// mOutputFormatter.FormatOffset24(line.FileOffset) + ")";
break;
case LineListGen.Line.Type.OrgDirective:
lineTypeStr = "address directive";
break;
case LineListGen.Line.Type.RegWidthDirective:
lineTypeStr = "register width directive";
break;
case LineListGen.Line.Type.EquDirective: {
lineTypeStr = "equate";
int symIndex = LineListGen.DefSymIndexFromOffset(line.FileOffset);
DefSymbol defSym = mProject.ActiveDefSymbolList[symIndex];
string sourceStr;
if (defSym.SymbolSource == Symbol.Source.Project) {
sourceStr = "project symbol definition";
} else if (defSym.SymbolSource == Symbol.Source.Platform) {
sourceStr = "platform symbol file (#" + defSym.LoadOrdinal +
":" + defSym.FileIdentifier + ")";
} else {
sourceStr = "???";
}
extraStr = "Source: " + sourceStr;
if (defSym.SymbolType == Symbol.Type.Constant) {
extraStr += " (constant)";
} else {
extraStr += " (address)";
}
}
break;
case LineListGen.Line.Type.LocalVariableTable:
lineTypeStr = "variable table";
if (mProject.LvTables.TryGetValue(line.FileOffset,
out LocalVariableTable lvt)) {
extraStr = string.Format("{0} entries, clear-previous={1}",
lvt.Count, lvt.ClearPrevious);
}
break;
default:
lineTypeStr = "???";
break;
}
// For anything that isn't code or data, show something simple and bail.
if (line.OffsetSpan == 0) {
sb.AppendFormat(Res.Strings.INFO_LINE_SUM_NON_FMT,
lineIndex, lineTypeStr);
#if DEBUG
sb.Append(" [offset=+" + line.FileOffset.ToString("x6") + "]");
#endif
if (!string.IsNullOrEmpty(extraStr)) {
sb.Append("\r\n\r\n");
sb.Append(extraStr);
}
mMainWin.InfoPanelContents = sb.ToString();
return;
}
Debug.Assert(line.IsCodeOrData);
Anattrib attr = mProject.GetAnattrib(line.FileOffset);
// Show number of bytes of code/data.
if (line.OffsetSpan == 1) {
sb.AppendFormat(Res.Strings.INFO_LINE_SUM_SINGULAR_FMT,
lineIndex, line.OffsetSpan, lineTypeStr);
} else {
sb.AppendFormat(Res.Strings.INFO_LINE_SUM_PLURAL_FMT,
lineIndex, line.OffsetSpan, lineTypeStr);
}
sb.Append("\r\n");
if (!mProject.OperandFormats.TryGetValue(line.FileOffset, out FormatDescriptor dfd)) {
// No user-specified format, but there may be a generated format.
sb.AppendFormat(Res.Strings.INFO_FD_SUM_FMT, Res.Strings.DEFAULT_VALUE);
if (attr.DataDescriptor != null) {
sb.Append(" [");
sb.Append(attr.DataDescriptor.ToUiString());
sb.Append("]");
}
} else {
// User-specified operand format.
// If the descriptor has a weak reference to an unknown symbol, should we
// call that out here?
sb.AppendFormat(Res.Strings.INFO_FD_SUM_FMT, dfd.ToUiString());
// If the format descriptor for an instruction has the wrong length, it will
// be ignored. Call that out.
if (attr.IsInstructionStart && attr.Length != dfd.Length) {
sb.AppendFormat(" [incorrect format length]");
}
}
sb.Append("\r\n");
// Debug only
//sb.Append("DEBUG: opAddr=" + attr.OperandAddress.ToString("x4") +
// " opOff=" + attr.OperandOffset.ToString("x4") + "\r\n");
sb.Append("\u2022Attributes:");
if (attr.IsHinted) {
sb.Append(" Hinted(");
for (int i = 0; i < line.OffsetSpan; i++) {
switch (mProject.TypeHints[line.FileOffset + i]) {
case CodeAnalysis.TypeHint.Code:
sb.Append("C");
break;
case CodeAnalysis.TypeHint.Data:
sb.Append("D");
break;
case CodeAnalysis.TypeHint.InlineData:
sb.Append("I");
break;
default:
break;
}
if (i > 8) {
sb.Append("...");
break;
}
}
sb.Append(')');
}
if (attr.IsEntryPoint) {
sb.Append(" EntryPoint");
}
if (attr.IsBranchTarget) {
sb.Append(" BranchTarget");
}
if (attr.DoesNotContinue) {
sb.Append(" NoContinue");
}
if (attr.DoesNotBranch) {
sb.Append(" NoBranch");
}
if (mProject.StatusFlagOverrides[line.FileOffset].AsInt != 0) {
sb.Append(" StatusFlags");
}
sb.Append("\r\n\r\n");
if (attr.IsInstruction) {
Asm65.OpDef op = mProject.CpuDef.GetOpDef(mProject.FileData[line.FileOffset]);
string shortDesc = mOpDesc.GetShortDescription(op.Mnemonic);
if (!string.IsNullOrEmpty(shortDesc)) {
if (op.IsUndocumented) {
sb.Append("\u25b6[*] ");
} else {
sb.Append("\u25b6 ");
}
sb.Append(shortDesc);
string addrStr = mOpDesc.GetAddressModeDescription(op.AddrMode);
if (!string.IsNullOrEmpty(addrStr)) {
sb.Append(", ");
sb.Append(addrStr);
}
sb.Append("\r\n");
}
sb.Append("\u2022Cycles: ");
int cycles = op.Cycles;
Asm65.OpDef.CycleMod cycMods = op.CycleMods;
sb.Append(cycles.ToString());
if (cycMods != 0) {
sb.Append(" (");
int workBits = (int)cycMods;
while (workBits != 0) {
// Isolate rightmost bit.
int firstBit = (~workBits + 1) & workBits;
sb.Append(mOpDesc.GetCycleModDescription((OpDef.CycleMod)firstBit));
// Remove from set.
workBits &= ~firstBit;
if (workBits != 0) {
// more to come
sb.Append(", ");
}
}
sb.Append(")");
}
sb.Append("\r\n");
const string FLAGS = "NVMXDIZC";
sb.Append("\u2022Flags affected: ");
Asm65.StatusFlags affectedFlags = op.FlagsAffected;
for (int i = 0; i < 8; i++) {
if (affectedFlags.GetBit((StatusFlags.FlagBits)(7 - i)) >= 0) {
sb.Append(' ');
sb.Append(FLAGS[i]);
} else {
sb.Append(" -");
}
}
sb.Append("\r\n");
string longDesc = mOpDesc.GetLongDescription(op.Mnemonic);
if (!string.IsNullOrEmpty(longDesc)) {
sb.Append("\r\n");
sb.Append(longDesc);
sb.Append("\r\n");
}
} else {
// do we want descriptions of the pseudo-ops?
}
// Publish
mMainWin.InfoPanelContents = sb.ToString();
}
#endregion Info panel
#region Debug features
public void Debug_ExtensionScriptInfo() {
string info = mProject.DebugGetLoadedScriptInfo();
Tools.WpfGui.ShowText dlg = new Tools.WpfGui.ShowText(mMainWin, info);
dlg.Title = "Loaded Extension Script Info";
dlg.ShowDialog();
}
public void Debug_ShowAnalysisTimers() {
if (mShowAnalysisTimersDialog == null) {
Tools.WpfGui.ShowText dlg = new Tools.WpfGui.ShowText(null, "(no data yet)");
dlg.Title = "Analysis Timers";
dlg.Closing += (sender, e) => {
Debug.WriteLine("Analysis timers dialog closed");
mShowAnalysisTimersDialog = null;
};
dlg.Show();
mShowAnalysisTimersDialog = dlg;
} else {
// Ask the dialog to close. Do the cleanup in the event.
mShowAnalysisTimersDialog.Close();
}
}
public void Debug_ShowAnalyzerOutput() {
if (mShowAnalyzerOutputDialog == null) {
Tools.WpfGui.ShowText dlg = new Tools.WpfGui.ShowText(null, "(no data yet)");
dlg.Title = "Analyzer Output";
dlg.Closing += (sender, e) => {
Debug.WriteLine("Analyzer output dialog closed");
mShowAnalyzerOutputDialog = null;
};
dlg.Show();
mShowAnalyzerOutputDialog = dlg;
} else {
// Ask the dialog to close. Do the cleanup in the event.
mShowAnalyzerOutputDialog.Close();
}
}
public void Debug_ShowProblemList() {
if (mShowProblemListDialog == null) {
Tools.WpfGui.ProblemListViewer dlg =
new Tools.WpfGui.ProblemListViewer(null, mProject, mOutputFormatter);
dlg.Closing += (sender, e) => {
Debug.WriteLine("Problem list window closed");
mShowProblemListDialog = null;
};
dlg.Show();
mShowProblemListDialog = dlg;
} else {
// Ask the dialog to close. Do the cleanup in the event.
mShowProblemListDialog.Close();
}
}
public void Debug_ShowUndoRedoHistory() {
if (mShowUndoRedoHistoryDialog == null) {
Tools.WpfGui.ShowText dlg = new Tools.WpfGui.ShowText(null,
mProject.DebugGetUndoRedoHistory());
dlg.Title = "Undo/Redo History";
dlg.Closing += (sender, e) => {
Debug.WriteLine("Undo/redo history dialog closed");
mShowUndoRedoHistoryDialog = null;
};
dlg.Show();
mShowUndoRedoHistoryDialog = dlg;
} else {
// Ask the dialog to close. Do the cleanup in the event.
mShowUndoRedoHistoryDialog.Close();
}
}
public void Debug_RunSourceGenerationTests() {
Tests.WpfGui.GenTestRunner dlg = new Tests.WpfGui.GenTestRunner(mMainWin);
dlg.ShowDialog();
}
public void Debug_Refresh() {
Debug.WriteLine("Reanalyzing...");
// Call through ApplyChanges so we update the timer task output.
UndoableChange uc =
UndoableChange.CreateDummyChange(UndoableChange.ReanalysisScope.CodeAndData);
ApplyChanges(new ChangeSet(uc), false);
UpdateTitle(); // in case something changed
}
public void Debug_ToggleCommentRulers() {
MultiLineComment.DebugShowRuler = !MultiLineComment.DebugShowRuler;
// Don't need to repeat the analysis, but we do want to save/restore the
// selection and top position when the comment fields change size.
UndoableChange uc =
UndoableChange.CreateDummyChange(UndoableChange.ReanalysisScope.DataOnly);
ApplyChanges(new ChangeSet(uc), false);
}
public void Debug_ToggleKeepAliveHack() {
ScriptManager.UseKeepAliveHack = !ScriptManager.UseKeepAliveHack;
}
#endregion Debug features
}
}
Reference in New Issue View Git Blame Copy Permalink