// DESCRIPTION: Verilator: Verilog Test module
//
// This file ONLY is placed under the Creative Commons Public Domain, for
// any use, without warranty, 2012 by Wilson Snyder.
// SPDX-License-Identifier: CC0-1.0

module t (/*AUTOARG*/
   // Inputs
   clk
   );
   input clk;

   integer 	cyc=0;
   reg [63:0] 	crc;
   reg [63:0] 	sum;

   // verilator lint_off MULTIDRIVEN
   /*AUTOWIRE*/
   // Beginning of automatic wires (for undeclared instantiated-module outputs)
   wire [31:0]		out;			// From test of Test.v
   wire [15:0]		out2;			// From test of Test.v
   // End of automatics
   // verilator lint_on MULTIDRIVEN

   Test test (
	      .en (crc[21:20]),
	      .a1 (crc[19:18]),
	      .a0 (crc[17:16]),
	      .d1 (crc[15:8]),
	      .d0 (crc[7:0]),
	      /*AUTOINST*/
	      // Outputs
	      .out			(out[31:0]),
	      .out2			(out2[15:0]),
	      // Inputs
	      .clk			(clk));

   // Aggregate outputs into a single result vector
   wire [63:0] result = {out2, 16'h0, out};

   // Test loop
`ifdef TEST_VERBOSE
   always @ (negedge clk) begin
      $write("[%0t] cyc==%0d crc=%x result=%x\n",$time, cyc, crc, result);
   end
`endif
   always @ (posedge clk) begin
`ifdef TEST_VERBOSE
      $write("[%0t] cyc==%0d crc=%x result=%x\n",$time, cyc, crc, result);
`endif
      cyc <= cyc + 1;
      crc <= {crc[62:0], crc[63]^crc[2]^crc[0]};
      sum <= result ^ {sum[62:0],sum[63]^sum[2]^sum[0]};
      if (cyc==0) begin
	 // Setup
	 crc <= 64'h5aef0c8d_d70a4497;
	 sum <= 64'h0;
	 test.clear();
      end
      else if (cyc<10) begin
	 sum <= 64'h0;
	 test.clear();
      end
      else if (cyc<90) begin
      end
      else if (cyc==99) begin
	 $write("[%0t] cyc==%0d crc=%x sum=%x\n",$time, cyc, crc, sum);
	 if (crc !== 64'hc77bb9b3784ea091) $stop;
	 // What checksum will we end up with (above print should match)
`define EXPECTED_SUM 64'hc68a94a34ec970aa
	 if (sum !== `EXPECTED_SUM) $stop;
	 $write("*-* All Finished *-*\n");
	 $finish;
      end
   end

endmodule

module Test (/*AUTOARG*/
   // Outputs
   out, out2,
   // Inputs
   clk, en, a0, a1, d0, d1
   );

   input clk;
   input [1:0] en;
   input [1:0] a0;
   input [1:0] a1;
   input [7:0] d0;
   input [7:0] d1;
   output reg [31:0] out;
   // verilator lint_off MULTIDRIVEN
   output reg [15:0] out2;

   reg [7:0] 	     mem [4];
   // verilator lint_on MULTIDRIVEN

   task clear();
      for (int i=0; i<4; ++i) mem[i] = 0;
   endtask

   always @(posedge clk) begin
      if (en[0]) begin
	 mem[a0] <= d0;
	 out2[7:0] <= d0;
      end
   end
   always @(negedge clk) begin
      if (en[1]) begin
	 mem[a1] <= d1;
	 out2[15:8] <= d0;
      end
   end

   assign out = {mem[3],mem[2],mem[1],mem[0]};

endmodule