6502/AtomBusMon
1
0
Fork 0
mirror of https://github.com/hoglet67/AtomBusMon.git synced 2024-06-12 09:29:33 +00:00
Code Issues Projects Releases Wiki Activity

Z80: cosmetic (remove replication of a register)

Browse Source 
Change-Id: I9ac3bf846da6f713e12b3d336cd9a25b5b6d8c96
This commit is contained in:
David Banks 2019-10-30 17:41:50 +00:00
parent 768863fb85
commit ceedc701ca
1 changed files with 13 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
src/Z80CpuMon.vhd
View File

@ -109,8 +109,7 @@ type state_type is (idle, nop_t1, nop_t2, nop_t3, nop_t4, rd_t1, rd_wa, rd_t2, r
signal IORQ_n_int : std_logic;
signal RFSH_n_int : std_logic;
signal M1_n_int : std_logic;
signal WAIT_n_int : std_logic;
signal WAIT_n_int1 : std_logic;
signal WAIT_n_latched : std_logic;
signal TState : std_logic_vector(2 downto 0);
signal TState1 : std_logic_vector(2 downto 0);
signal SS_Single : std_logic;
@ -143,7 +142,6 @@ type state_type is (idle, nop_t1, nop_t2, nop_t3, nop_t4, rd_t1, rd_wa, rd_t2, r
signal mon_rfsh_n : std_logic;
signal mon_rd_n : std_logic;
signal mon_wr_n : std_logic;
signal mon_wait_n : std_logic;
signal INT_n_sync : std_logic;
signal NMI_n_sync : std_logic;
@ -276,7 +274,7 @@ begin
RESET_n => RESET_n_int,
CLK_n => cpu_clk,
CEN => cpu_clken,
WAIT_n => WAIT_n_int,
WAIT_n => WAIT_n,
INT_n => INT_n_sync,
NMI_n => NMI_n_sync,
BUSRQ_n => BUSRQ_n,
@ -313,13 +311,7 @@ begin
CountCycle <= '1' when state = idle else '0';
-- For the break point logic to work, the following must happen
-- SS_Single taken high by BusMonCore on the rising edge at the start of T2
-- WAIT_n_int must be taken low before the falling edge in the middle of T2
-- This implies a combinatorial path from SS_Single to WAIT_n_int
WAIT_n_int <= WAIT_n;
-- The breakpoint logic stops the Z80 in M1/T3 using cpu_clken
cpu_clken <= '0' when state = idle and SS_Single = '1' and Sync1 = '1' else
'0' when state /= idle else
'1';
@ -328,7 +320,7 @@ begin
skip_opcode_latch : process(CLK_n)
begin
if rising_edge(CLK_n) then
if (M1_n_int = '0' and WAIT_n_int1 = '1' and TState = "010") then
if (M1_n_int = '0' and WAIT_n_latched = '1' and TState = "010") then
if (skipNextOpcode = '0' and (Data = x"CB" or Data = x"DD" or Data = x"ED" or Data = x"FD")) then
skipNextOpcode <= '1';
else
@ -341,18 +333,18 @@ begin
-- For instruction breakpoints, we make the monitoring decision as early as possibe
-- to allow time to stop the current instruction, which is possible because we don't
-- really care about the data (it's re-read from memory by the disassembler).
Sync0 <= '1' when WAIT_n_int = '1' and M1_n_int = '0' and TState = "010" and skipNextOpcode = '0' else '0';
Sync0 <= '1' when WAIT_n = '1' and M1_n_int = '0' and TState = "010" and skipNextOpcode = '0' else '0';
-- For memory reads/write breakpoints we make the monitoring decision in the middle of T2
-- but only if WAIT_n is '1' so we catch the right data.
Read_n0 <= not (WAIT_n_int and (not RD_n_int) and (not MREQ_n_int) and (M1_n_int)) when TState = "010" else '1';
Write_n0 <= not (WAIT_n_int and ( RD_n_int) and (not MREQ_n_int) and (M1_n_int)) when TState = "010" else '1';
Read_n0 <= not (WAIT_n and (not RD_n_int) and (not MREQ_n_int) and (M1_n_int)) when TState = "010" else '1';
Write_n0 <= not (WAIT_n and ( RD_n_int) and (not MREQ_n_int) and (M1_n_int)) when TState = "010" else '1';
-- For IO reads/writes we make the monitoring decision in the middle of the second T2 cycle
-- but only if WAIT_n is '1' so we catch the right data.
-- This one cycle delay accounts for the forced wait state
ReadIO_n0 <= not (WAIT_n_int and (not RD_n_int) and (not IORQ_n_int) and (M1_n_int)) when TState1 = "010" else '1';
WriteIO_n0 <= not (WAIT_n_int and ( RD_n_int) and (not IORQ_n_int) and (M1_n_int)) when TState1 = "010" else '1';
ReadIO_n0 <= not (WAIT_n and (not RD_n_int) and (not IORQ_n_int) and (M1_n_int)) when TState1 = "010" else '1';
WriteIO_n0 <= not (WAIT_n and ( RD_n_int) and (not IORQ_n_int) and (M1_n_int)) when TState1 = "010" else '1';
-- Hold the monitoring decision so it is valid on the rising edge of the clock
-- For instruction fetches and writes, the monitor sees these at the start of T3
@ -368,7 +360,7 @@ begin
ReadIO_n <= ReadIO_n1;
WriteIO_n <= WriteIO_n0;
-- Latch wait seen by T80 on the falling edge, for use on the next rising edge
WAIT_n_int1 <= WAIT_n_int;
WAIT_n_latched <= WAIT_n;
end if;
end process;
@ -524,7 +516,7 @@ begin
rfsh_addr(6 downto 0) <= rfsh_addr(6 downto 0) + 1;
mon_xx_n <= mode;
when nop_t2 =>
if mon_wait_n = '1' then
if WAIT_n_latched = '1' then
mon_m1_n <= '1';
mon_xx_n <= '1';
if SS_Step_held = '1' or SS_Single = '0' then
@ -559,7 +551,7 @@ begin
when rd_wa =>
state <= rd_t2;
when rd_t2 =>
if mon_wait_n = '1' then
if WAIT_n_latched = '1' then
state <= rd_t3;
end if;
when rd_t3 =>
@ -576,7 +568,7 @@ begin
when wr_wa =>
state <= wr_t2;
when wr_t2 =>
if mon_wait_n = '1' then
if WAIT_n_latched = '1' then
state <= wr_t3;
end if;
when wr_t3 =>
@ -623,8 +615,6 @@ begin
else
mon_wr_n <= '1';
end if;
-- Sample wait on the falling edge of the clock
mon_wait_n <= WAIT_n;
end if;
end process;