6502/AtomBusMon
1
0
Fork 0
mirror of https://github.com/hoglet67/AtomBusMon.git synced 2025-03-12 21:32:35 +00:00
Code Issues Projects Releases Wiki Activity

Added option to do repeat a read/write command n times (where n can be large), incremented version to 0.37

Browse Source 
Change-Id: I4b1b02e8d67a581acbf4d5b044e86ffb2bc7e27e
This commit is contained in:
David Banks 2015-06-22 18:11:11 +01:00
parent 3c7fb3429e
commit eec6e10440
3 changed files with 75 additions and 52 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

BIN
AtomCpuMon.bit
View File

Binary file not shown.

71
firmware/AtomBusMon.c
View File

@ -258,12 +258,14 @@ unsigned char dopaddr[256] =
#define CMD_WATCH_READ 0x09
#define CMD_FIFO_RST 0x0A
#define CMD_LOAD_MEM 0x0C
#define CMD_RD_MEM 0x0E
#define CMD_WR_MEM 0x0F
#define CMD_RD_MEM 0x10
#define CMD_RD_MEM_INC 0x11
#define CMD_WR_MEM 0x12
#define CMD_WR_MEM_INC 0x13
// Control bits
#define CMD_MASK 0x1F
#define CMD_EDGE 0x10
#define CMD_MASK 0x3F
#define CMD_EDGE 0x20
#define MUXSEL_MASK 0x1F
#define MUXSEL_BIT 0
@ -328,7 +330,7 @@ char *triggerStrings[NUM_TRIGGERS] = {
};
#define VERSION "0.36"
#define VERSION "0.37"
#ifdef EMBEDDED_6502
#define NUM_CMDS 27
@ -649,29 +651,27 @@ unsigned int readByte() {
return hwRead8(OFFSET_DATA);
}
unsigned int readByteInc() {
hwCmd(CMD_RD_MEM_INC, 0);
Delay_us(10);
return hwRead8(OFFSET_DATA);
}
void writeByte() {
hwCmd(CMD_WR_MEM, 0);
}
unsigned int readMem(unsigned int addr) {
loadAddr(addr);
return readByte();
void writeByteInc() {
hwCmd(CMD_WR_MEM_INC, 0);
}
void writeMem(unsigned int addr, unsigned int data) {
loadData(data);
loadAddr(addr);
writeByte();
}
unsigned int disassemble(unsigned int addr)
{
unsigned int temp;
unsigned int op = readByte();
unsigned int op = readByteInc();
int mode = dopaddr[op];
unsigned int p1 = (mode > MARK2) ? readByte() : 0;
unsigned int p2 = (mode > MARK3) ? readByte() : 0;
unsigned int p1 = (mode > MARK2) ? readByteInc() : 0;
unsigned int p2 = (mode > MARK3) ? readByteInc() : 0;
log0("%04X : %s ", addr, opStrings[dopname[op]]);
switch (mode)
@ -840,7 +840,7 @@ void doCmdMem(char *params) {
loadAddr(memAddr);
for (i = 0; i < 0x100; i+= 16) {
for (j = 0; j < 16; j++) {
row[j] = readByte();
row[j] = readByteInc();
}
log0("%04X ", memAddr + i);
for (j = 0; j < 16; j++) {
@ -871,17 +871,32 @@ void doCmdDis(char *params) {
void doCmdWrite(char *params) {
unsigned int addr;
unsigned int data;
sscanf(params, "%x %x", &addr, &data);
long count = 1;
sscanf(params, "%x %x %ld", &addr, &data, &count);
log0("Wr: %04X = %X\n", addr, data);
writeMem(addr, data);
loadData(data);
loadAddr(addr);
while (count-- > 0) {
writeByte();
}
}
void doCmdRead(char *params) {
unsigned int addr;
sscanf(params, "%x", &addr);
unsigned int data;
data = readMem(addr);
unsigned int data2;
long count = 1;
sscanf(params, "%x %ld", &addr, &count);
loadAddr(addr);
data = readByte();
log0("Rd: %04X = %X\n", addr, data);
while (count-- > 1) {
data2 = readByte();
if (data2 != data) {
log0("Inconsistent Rd: %02X <> %02X\n", data2, data);
}
data = data2;
}
}
void doCmdFill(char *params) {
@ -894,7 +909,7 @@ void doCmdFill(char *params) {
loadData(data);
loadAddr(start);
for (i = start; i <= end; i++) {
hwCmd(CMD_WR_MEM, 0);
writeByteInc();
}
}
@ -908,7 +923,7 @@ void doCmdCrc(char *params) {
sscanf(params, "%x %x", &start, &end);
loadAddr(start);
for (i = start; i <= end; i++) {
data = readByte();
data = readByteInc();
for (j = 0; j < 8; j++) {
crc = crc << 1;
crc = crc | (data & 1);
@ -951,13 +966,15 @@ void test(unsigned int start, unsigned int end, int data) {
// Write
srand(data);
for (i = start; i <= end; i++) {
writeMem(i, getData(i, data));
loadData(getData(i, data));
loadAddr(i);
writeByteInc();
}
// Read
srand(data);
loadAddr(start);
for (i = start; i <= end; i++) {
actual = readByte();
actual = readByteInc();
expected = getData(i, data);
if (expected != actual) {
log0("Fail at %04lX (Wrote: %02X, Read back %02X)\n", i, expected, actual);

56
src/BusMonCore.vhd
View File

@ -96,7 +96,7 @@ architecture behavioral of BusMonCore is
signal cmd_edge : std_logic;
signal cmd_edge1 : std_logic;
signal cmd_edge2 : std_logic;
signal cmd : std_logic_vector(3 downto 0);
signal cmd : std_logic_vector(4 downto 0);
signal addr_sync : std_logic_vector(15 downto 0);
signal addr_inst : std_logic_vector(15 downto 0);
@ -113,6 +113,7 @@ architecture behavioral of BusMonCore is
signal bw_status : std_logic_vector(3 downto 0);
signal bw_status1 : std_logic_vector(3 downto 0);
signal auto_inc : std_logic;
signal brkpt_reg : std_logic_vector(num_comparators * reg_width - 1 downto 0);
signal brkpt_enable : std_logic;
@ -194,8 +195,8 @@ begin
portbout(1) => cmd(1),
portbout(2) => cmd(2),
portbout(3) => cmd(3),
portbout(4) => cmd_edge,
portbout(5) => open,
portbout(4) => cmd(4),
portbout(5) => cmd_edge,
portbout(6) => open,
portbout(7) => open,
@ -362,17 +363,19 @@ begin
end process;
-- 6502 Control Commands
-- 000x Enable/Disable single stepping
-- 001x Enable/Disable breakpoints / watches
-- 010x Load breakpoint register
-- 011x Reset
-- 1000 Single Step
-- 1001 FIFO Read
-- 1010 FIFO Reset
-- 110x Load memory address/data register
-- 1110 Read memory
-- 1111 Write memory
-- 0000x Enable/Disable single stepping
-- 0001x Enable/Disable breakpoints / watches
-- 0010x Load breakpoint register
-- 0011x Reset
-- 01000 Single Step
-- 01001 FIFO Read
-- 01010 FIFO Reset
-- 0110x Load memory address/data register
-- 0111x Unused
-- 1000x Read memory
-- 1001x Write memory
-- 101xx Unused
-- 11xxx Unused
risingProcess: process (Phi2)
begin
if rising_edge(Phi2) then
@ -392,47 +395,50 @@ begin
fifo_rst <= '0';
memory_rd <= '0';
memory_wr <= '0';
auto_inc <= '0';
if (cmd_edge2 = '0' and cmd_edge1 = '1') then
if (cmd(3 downto 1) = "000") then
if (cmd(4 downto 1) = "0000") then
single <= cmd(0);
end if;
if (cmd(3 downto 1) = "001") then
if (cmd(4 downto 1) = "0001") then
brkpt_enable <= cmd(0);
end if;
if (cmd(3 downto 1) = "010") then
if (cmd(4 downto 1) = "0010") then
brkpt_reg <= cmd(0) & brkpt_reg(brkpt_reg'length - 1 downto 1);
end if;
if (cmd(3 downto 1) = "110") then
if (cmd(4 downto 1) = "0110") then
addr_dout_reg <= cmd(0) & addr_dout_reg(addr_dout_reg'length - 1 downto 1);
end if;
if (cmd(3 downto 1) = "011") then
if (cmd(4 downto 1) = "0011") then
reset <= cmd(0);
end if;
if (cmd(3 downto 0) = "1001") then
if (cmd(4 downto 0) = "01001") then
fifo_rd <= '1';
end if;
if (cmd(3 downto 0) = "1010") then
if (cmd(4 downto 0) = "01010") then
fifo_rst <= '1';
end if;
if (cmd(3 downto 0) = "1110") then
if (cmd(4 downto 1) = "1000") then
memory_rd <= '1';
auto_inc <= cmd(0);
end if;
if (cmd(3 downto 0) = "1111") then
if (cmd(4 downto 1) = "1001") then
memory_wr <= '1';
auto_inc <= cmd(0);
end if;
end if;
-- Auto increment the memory address reg the cycle after a rd/wr
if (memory_rd = '1' or memory_wr = '1') then
if (auto_inc = '1' and (memory_rd = '1' or memory_wr = '1')) then
addr_dout_reg(23 downto 8) <= addr_dout_reg(23 downto 8) + 1;
end if;
@ -441,7 +447,7 @@ begin
single <= '1';
end if;
if ((single = '0') or (cmd_edge2 = '0' and cmd_edge1 = '1' and cmd = "1000")) then
if ((single = '0') or (cmd_edge2 = '0' and cmd_edge1 = '1' and cmd = "01000")) then
Rdy_int <= (not brkpt_active);
else
Rdy_int <= (not Sync);