mirror of
https://github.com/hoglet67/AtomBusMon.git
synced 2024-06-02 18:41:35 +00:00
1535 lines
59 KiB
VHDL
1535 lines
59 KiB
VHDL
-- -----------------------------------------------------------------------
|
|
--
|
|
-- This is a table driven 65Cx2 core by A.Daly
|
|
-- This is a derivative of the excellent FPGA64 core see below
|
|
--
|
|
-- -----------------------------------------------------------------------
|
|
-- Copyright 2005-2008 by Peter Wendrich (pwsoft@syntiac.com)
|
|
-- http://www.syntiac.com/fpga64.html
|
|
-- -----------------------------------------------------------------------
|
|
|
|
|
|
library IEEE;
|
|
use ieee.std_logic_1164.ALL;
|
|
use ieee.numeric_std.ALL;
|
|
|
|
entity R65C02 is
|
|
port (
|
|
|
|
reset : in std_logic;
|
|
clk : in std_logic;
|
|
enable : in std_logic;
|
|
nmi_n : in std_logic;
|
|
irq_n : in std_logic;
|
|
di : in unsigned(7 downto 0);
|
|
do : out unsigned(7 downto 0);
|
|
addr : out unsigned(15 downto 0);
|
|
nwe : out std_logic;
|
|
sync : out std_logic;
|
|
sync_irq : out std_logic;
|
|
-- 6502 registers (MSB) PC, SP, P, Y, X, A (LSB)
|
|
Regs : out std_logic_vector(63 downto 0)
|
|
);
|
|
end R65C02;
|
|
|
|
-- Store Zp (3) => fetch, cycle2, cycleEnd
|
|
-- Store Zp,x (4) => fetch, cycle2, preWrite, cycleEnd
|
|
-- Read Zp,x (4) => fetch, cycle2, cycleRead, cycleRead2
|
|
-- Rmw Zp,x (6) => fetch, cycle2, cycleRead, cycleRead2, cycleRmw, cycleEnd
|
|
-- Store Abs (4) => fetch, cycle2, cycle3, cycleEnd
|
|
-- Store Abs,x (5) => fetch, cycle2, cycle3, preWrite, cycleEnd
|
|
-- Rts (6) => fetch, cycle2, cycle3, cycleRead, cycleJump, cycleIncrEnd
|
|
-- Rti (6) => fetch, cycle2, stack1, stack2, stack3, cycleJump
|
|
-- Jsr (6) => fetch, cycle2, .. cycle5, cycle6, cycleJump
|
|
-- Jmp abs (-) => fetch, cycle2, .., cycleJump
|
|
-- Jmp (ind) (-) => fetch, cycle2, .., cycleJump
|
|
-- Brk / irq (6) => fetch, cycle2, stack2, stack3, stack4
|
|
-- -----------------------------------------------------------------------
|
|
|
|
architecture Behavioral of R65C02 is
|
|
|
|
-- signal counter : unsigned(27 downto 0);
|
|
-- signal mask_irq : std_logic;
|
|
-- signal mask_enable : std_logic;
|
|
-- Statemachine
|
|
|
|
type cpuCycles is (
|
|
opcodeFetch, -- New opcode is read and registers updated
|
|
cycle2,
|
|
cycle3,
|
|
cyclePreIndirect,
|
|
cycleIndirect,
|
|
cycleBranchTaken,
|
|
cycleBranchPage,
|
|
cyclePreRead, -- Cycle before read while doing zeropage indexed addressing.
|
|
cycleRead, -- Read cycle
|
|
cycleRead2, -- Second read cycle after page-boundary crossing.
|
|
cycleRmw, -- Calculate ALU output for read-modify-write instr.
|
|
cyclePreWrite, -- Cycle before write when doing indexed addressing.
|
|
cycleWrite, -- Write cycle for zeropage or absolute addressing.
|
|
cycleStack1,
|
|
cycleStack2,
|
|
cycleStack3,
|
|
cycleStack4,
|
|
cycleJump, -- Last cycle of Jsr, Jmp. Next fetch address is target addr.
|
|
cycleEnd
|
|
);
|
|
signal theCpuCycle : cpuCycles;
|
|
signal nextCpuCycle : cpuCycles;
|
|
signal updateRegisters : boolean;
|
|
signal processIrq : std_logic;
|
|
signal nmiReg: std_logic;
|
|
signal nmiEdge: std_logic;
|
|
signal irqReg : std_logic; -- Delay IRQ input with one clock cycle.
|
|
signal soReg : std_logic; -- SO pin edge detection
|
|
|
|
-- Opcode decoding
|
|
constant opcUpdateA : integer := 0;
|
|
constant opcUpdateX : integer := 1;
|
|
constant opcUpdateY : integer := 2;
|
|
constant opcUpdateS : integer := 3;
|
|
constant opcUpdateN : integer := 4;
|
|
constant opcUpdateV : integer := 5;
|
|
constant opcUpdateD : integer := 6;
|
|
constant opcUpdateI : integer := 7;
|
|
constant opcUpdateZ : integer := 8;
|
|
constant opcUpdateC : integer := 9;
|
|
|
|
constant opcSecondByte : integer := 10;
|
|
constant opcAbsolute : integer := 11;
|
|
constant opcZeroPage : integer := 12;
|
|
constant opcIndirect : integer := 13;
|
|
constant opcStackAddr : integer := 14; -- Push/Pop address
|
|
constant opcStackData : integer := 15; -- Push/Pop status/data
|
|
constant opcJump : integer := 16;
|
|
constant opcBranch : integer := 17;
|
|
constant indexX : integer := 18;
|
|
constant indexY : integer := 19;
|
|
constant opcStackUp : integer := 20;
|
|
constant opcWrite : integer := 21;
|
|
constant opcRmw : integer := 22;
|
|
constant opcIncrAfter : integer := 23; -- Insert extra cycle to increment PC (RTS)
|
|
constant opcRti : integer := 24;
|
|
constant opcIRQ : integer := 25;
|
|
|
|
|
|
constant opcInA : integer := 26;
|
|
constant opcInBrk : integer := 27;
|
|
constant opcInX : integer := 28;
|
|
constant opcInY : integer := 29;
|
|
constant opcInS : integer := 30;
|
|
constant opcInT : integer := 31;
|
|
constant opcInH : integer := 32;
|
|
constant opcInClear : integer := 33;
|
|
|
|
constant aluMode1From : integer := 34;
|
|
--
|
|
constant aluMode1To : integer := 37;
|
|
|
|
constant aluMode2From : integer := 38;
|
|
--
|
|
constant aluMode2To : integer := 40;
|
|
--
|
|
constant opcInCmp : integer := 41;
|
|
constant opcInCpx : integer := 42;
|
|
constant opcInCpy : integer := 43;
|
|
|
|
|
|
subtype addrDef is unsigned(0 to 15);
|
|
--
|
|
-- is Interrupt -----------------+
|
|
-- instruction is RTI ----------------+|
|
|
-- PC++ on last cycle (RTS) ---------------+||
|
|
-- RMW --------------+|||
|
|
-- Write -------------+||||
|
|
-- Pop/Stack up -------------+|||||
|
|
-- Branch ---------+ ||||||
|
|
-- Jump ----------+| ||||||
|
|
-- Push or Pop data -------+|| ||||||
|
|
-- Push or Pop addr ------+||| ||||||
|
|
-- Indirect -----+|||| ||||||
|
|
-- ZeroPage ----+||||| ||||||
|
|
-- Absolute ---+|||||| ||||||
|
|
-- PC++ on cycle2 --+||||||| ||||||
|
|
-- |AZI||JBXY|WM|||
|
|
constant immediate : addrDef := "1000000000000000";
|
|
constant implied : addrDef := "0000000000000000";
|
|
-- Zero page
|
|
constant readZp : addrDef := "1010000000000000";
|
|
constant writeZp : addrDef := "1010000000010000";
|
|
constant rmwZp : addrDef := "1010000000001000";
|
|
-- Zero page indexed
|
|
constant readZpX : addrDef := "1010000010000000";
|
|
constant writeZpX : addrDef := "1010000010010000";
|
|
constant rmwZpX : addrDef := "1010000010001000";
|
|
constant readZpY : addrDef := "1010000001000000";
|
|
constant writeZpY : addrDef := "1010000001010000";
|
|
constant rmwZpY : addrDef := "1010000001001000";
|
|
-- Zero page indirect
|
|
constant readIndX : addrDef := "1001000010000000";
|
|
constant writeIndX : addrDef := "1001000010010000";
|
|
constant rmwIndX : addrDef := "1001000010001000";
|
|
constant readIndY : addrDef := "1001000001000000";
|
|
constant writeIndY : addrDef := "1001000001010000";
|
|
constant rmwIndY : addrDef := "1001000001001000";
|
|
constant rmwInd : addrDef := "1001000000001000";
|
|
constant readInd : addrDef := "1001000000000000";
|
|
constant writeInd : addrDef := "1001000000010000";
|
|
-- |AZI||JBXY|WM||
|
|
-- Absolute
|
|
constant readAbs : addrDef := "1100000000000000";
|
|
constant writeAbs : addrDef := "1100000000010000";
|
|
constant rmwAbs : addrDef := "1100000000001000";
|
|
constant readAbsX : addrDef := "1100000010000000";
|
|
constant writeAbsX : addrDef := "1100000010010000";
|
|
constant rmwAbsX : addrDef := "1100000010001000";
|
|
constant readAbsY : addrDef := "1100000001000000";
|
|
constant writeAbsY : addrDef := "1100000001010000";
|
|
constant rmwAbsY : addrDef := "1100000001001000";
|
|
-- PHA PHP
|
|
constant push : addrDef := "0000010000000000";
|
|
-- PLA PLP
|
|
constant pop : addrDef := "0000010000100000";
|
|
-- Jumps
|
|
constant jsr : addrDef := "1000101000000000";
|
|
constant jumpAbs : addrDef := "1000001000000000";
|
|
constant jumpInd : addrDef := "1100001000000000";
|
|
constant jumpIndX : addrDef := "1100001010000000";
|
|
constant relative : addrDef := "1000000100000000";
|
|
-- Specials
|
|
constant rts : addrDef := "0000101000100100";
|
|
constant rti : addrDef := "0000111000100010";
|
|
constant brk : addrDef := "1000111000000001";
|
|
-- constant irq : addrDef := "0000111000000001";
|
|
-- constant : unsigned(0 to 0) := "0";
|
|
constant xxxxxxxx : addrDef := "----------0---00";
|
|
|
|
-- A = accu
|
|
-- X = index X
|
|
-- Y = index Y
|
|
-- S = Stack pointer
|
|
-- H = indexH
|
|
--
|
|
-- AEXYSTHc
|
|
constant aluInA : unsigned(0 to 7) := "10000000";
|
|
constant aluInBrk : unsigned(0 to 7) := "01000000";
|
|
constant aluInX : unsigned(0 to 7) := "00100000";
|
|
constant aluInY : unsigned(0 to 7) := "00010000";
|
|
constant aluInS : unsigned(0 to 7) := "00001000";
|
|
constant aluInT : unsigned(0 to 7) := "00000100";
|
|
constant aluInClr : unsigned(0 to 7) := "00000001";
|
|
constant aluInSet : unsigned(0 to 7) := "00000000";
|
|
constant aluInXXX : unsigned(0 to 7) := "--------";
|
|
|
|
-- Most of the aluModes are just like the opcodes.
|
|
-- aluModeInp -> input is output. calculate N and Z
|
|
-- aluModeCmp -> Compare for CMP, CPX, CPY
|
|
-- aluModeFlg -> input to flags needed for PLP, RTI and CLC, SEC, CLV
|
|
-- aluModeInc -> for INC but also INX, INY
|
|
-- aluModeDec -> for DEC but also DEX, DEY
|
|
|
|
subtype aluMode1 is unsigned(0 to 3);
|
|
subtype aluMode2 is unsigned(0 to 2);
|
|
subtype aluMode is unsigned(0 to 9);
|
|
|
|
-- Logic/Shift ALU
|
|
constant aluModeInp : aluMode1 := "0000";
|
|
constant aluModeP : aluMode1 := "0001";
|
|
constant aluModeInc : aluMode1 := "0010";
|
|
constant aluModeDec : aluMode1 := "0011";
|
|
constant aluModeFlg : aluMode1 := "0100";
|
|
constant aluModeBit : aluMode1 := "0101";
|
|
-- 0110
|
|
-- 0111
|
|
constant aluModeLsr : aluMode1 := "1000";
|
|
constant aluModeRor : aluMode1 := "1001";
|
|
constant aluModeAsl : aluMode1 := "1010";
|
|
constant aluModeRol : aluMode1 := "1011";
|
|
constant aluModeTSB : aluMode1 := "1100";
|
|
constant aluModeTRB : aluMode1 := "1101";
|
|
-- 1110
|
|
-- 1111;
|
|
|
|
-- Arithmetic ALU
|
|
constant aluModePss : aluMode2 := "000";
|
|
constant aluModeCmp : aluMode2 := "001";
|
|
constant aluModeAdc : aluMode2 := "010";
|
|
constant aluModeSbc : aluMode2 := "011";
|
|
constant aluModeAnd : aluMode2 := "100";
|
|
constant aluModeOra : aluMode2 := "101";
|
|
constant aluModeEor : aluMode2 := "110";
|
|
constant aluModeNoF : aluMode2 := "111";
|
|
--aluModeBRK
|
|
--constant aluBrk : aluMode := aluModeBRK & aluModePss & "---";
|
|
--constant aluFix : aluMode := aluModeInp & aluModeNoF & "---";
|
|
constant aluInp : aluMode := aluModeInp & aluModePss & "---";
|
|
constant aluP : aluMode := aluModeP & aluModePss & "---";
|
|
constant aluInc : aluMode := aluModeInc & aluModePss & "---";
|
|
constant aluDec : aluMode := aluModeDec & aluModePss & "---";
|
|
constant aluFlg : aluMode := aluModeFlg & aluModePss & "---";
|
|
constant aluBit : aluMode := aluModeBit & aluModeAnd & "---";
|
|
constant aluRor : aluMode := aluModeRor & aluModePss & "---";
|
|
constant aluLsr : aluMode := aluModeLsr & aluModePss & "---";
|
|
constant aluRol : aluMode := aluModeRol & aluModePss & "---";
|
|
constant aluAsl : aluMode := aluModeAsl & aluModePss & "---";
|
|
constant aluTSB : aluMode := aluModeTSB & aluModePss & "---";
|
|
constant aluTRB : aluMode := aluModeTRB & aluModePss & "---";
|
|
constant aluCmp : aluMode := aluModeInp & aluModeCmp & "100";
|
|
constant aluCpx : aluMode := aluModeInp & aluModeCmp & "010";
|
|
constant aluCpy : aluMode := aluModeInp & aluModeCmp & "001";
|
|
constant aluAdc : aluMode := aluModeInp & aluModeAdc & "---";
|
|
constant aluSbc : aluMode := aluModeInp & aluModeSbc & "---";
|
|
constant aluAnd : aluMode := aluModeInp & aluModeAnd & "---";
|
|
constant aluOra : aluMode := aluModeInp & aluModeOra & "---";
|
|
constant aluEor : aluMode := aluModeInp & aluModeEor & "---";
|
|
|
|
constant aluXXX : aluMode := (others => '-');
|
|
|
|
|
|
-- Stack operations. Push/Pop/None
|
|
constant stackInc : unsigned(0 to 0) := "0";
|
|
constant stackDec : unsigned(0 to 0) := "1";
|
|
constant stackXXX : unsigned(0 to 0) := "-";
|
|
|
|
subtype decodedBitsDef is unsigned(0 to 43);
|
|
type opcodeInfoTableDef is array(0 to 255) of decodedBitsDef;
|
|
constant opcodeInfoTable : opcodeInfoTableDef := (
|
|
-- +------- Update register A
|
|
-- |+------ Update register X
|
|
-- ||+----- Update register Y
|
|
-- |||+---- Update register S
|
|
-- |||| +-- Update Flags
|
|
-- |||| |
|
|
-- |||| _|__
|
|
-- |||| / \
|
|
-- AXYS NVDIZC addressing aluInput aluMode
|
|
-- AXYS NVDIZC addressing aluInput aluMode
|
|
"0000" & "001100" & brk & aluInBrk & aluP, -- 00 BRK
|
|
"1000" & "100010" & readIndX & aluInT & aluOra, -- 01 ORA (zp,x)
|
|
"0000" & "000000" & immediate & aluInXXX & aluXXX, -- 02 NOP ------- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 03 NOP ------- 65C02
|
|
"0000" & "000010" & rmwZp & aluInT & aluTSB, -- 04 TSB zp ----------- 65C02
|
|
"1000" & "100010" & readZp & aluInT & aluOra, -- 05 ORA zp
|
|
"0000" & "100011" & rmwZp & aluInT & aluAsl, -- 06 ASL zp
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 07 NOP ------- 65C02
|
|
"0000" & "000000" & push & aluInXXX & aluP, -- 08 PHP
|
|
"1000" & "100010" & immediate & aluInT & aluOra, -- 09 ORA imm
|
|
"1000" & "100011" & implied & aluInA & aluAsl, -- 0A ASL accu
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 0B NOP ------- 65C02
|
|
"0000" & "000010" & rmwAbs & aluInT & aluTSB, -- 0C TSB abs ---------- 65C02
|
|
"1000" & "100010" & readAbs & aluInT & aluOra, -- 0D ORA abs
|
|
"0000" & "100011" & rmwAbs & aluInT & aluAsl, -- 0E ASL abs
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 0F NOP ------- 65C02
|
|
"0000" & "000000" & relative & aluInXXX & aluXXX, -- 10 BPL
|
|
"1000" & "100010" & readIndY & aluInT & aluOra, -- 11 ORA (zp),y
|
|
"1000" & "100010" & readInd & aluInT & aluOra, -- 12 ORA (zp) --------- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 13 NOP ------- 65C02
|
|
"0000" & "000010" & rmwZp & aluInT & aluTRB, -- 14 TRB zp ~---------- 65C02
|
|
"1000" & "100010" & readZpX & aluInT & aluOra, -- 15 ORA zp,x
|
|
"0000" & "100011" & rmwZpX & aluInT & aluAsl, -- 16 ASL zp,x
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 17 NOP ------- 65C02
|
|
"0000" & "000001" & implied & aluInClr & aluFlg, -- 18 CLC
|
|
"1000" & "100010" & readAbsY & aluInT & aluOra, -- 19 ORA abs,y
|
|
"1000" & "100010" & implied & aluInA & aluInc, -- 1A INC accu --------- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 1B NOP ------- 65C02
|
|
"0000" & "000010" & rmwAbs & aluInT & aluTRB, -- 1C TRB abs ~----- --- 65C02
|
|
"1000" & "100010" & readAbsX & aluInT & aluOra, -- 1D ORA abs,x
|
|
"0000" & "100011" & rmwAbsX & aluInT & aluAsl, -- 1E ASL abs,x
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 1F NOP ------- 65C02
|
|
-- AXYS NVDIZC addressing aluInput aluMode
|
|
"0000" & "000000" & jsr & aluInXXX & aluXXX, -- 20 JSR
|
|
"1000" & "100010" & readIndX & aluInT & aluAnd, -- 21 AND (zp,x)
|
|
"0000" & "000000" & immediate & aluInXXX & aluXXX, -- 22 NOP ------- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 23 NOP ------- 65C02
|
|
"0000" & "110010" & readZp & aluInT & aluBit, -- 24 BIT zp
|
|
"1000" & "100010" & readZp & aluInT & aluAnd, -- 25 AND zp
|
|
"0000" & "100011" & rmwZp & aluInT & aluRol, -- 26 ROL zp
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 27 NOP ------- 65C02
|
|
"0000" & "111111" & pop & aluInT & aluFlg, -- 28 PLP
|
|
"1000" & "100010" & immediate & aluInT & aluAnd, -- 29 AND imm
|
|
"1000" & "100011" & implied & aluInA & aluRol, -- 2A ROL accu
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 2B NOP ------- 65C02
|
|
"0000" & "110010" & readAbs & aluInT & aluBit, -- 2C BIT abs
|
|
"1000" & "100010" & readAbs & aluInT & aluAnd, -- 2D AND abs
|
|
"0000" & "100011" & rmwAbs & aluInT & aluRol, -- 2E ROL abs
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 2F NOP ------- 65C02
|
|
"0000" & "000000" & relative & aluInXXX & aluXXX, -- 30 BMI
|
|
"1000" & "100010" & readIndY & aluInT & aluAnd, -- 31 AND (zp),y
|
|
"1000" & "100010" & readInd & aluInT & aluAnd, -- 32 AND (zp) -------- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 33 NOP ------- 65C02
|
|
"0000" & "110010" & readZpX & aluInT & aluBit, -- 34 BIT zp,x -------- 65C02
|
|
"1000" & "100010" & readZpX & aluInT & aluAnd, -- 35 AND zp,x
|
|
"0000" & "100011" & rmwZpX & aluInT & aluRol, -- 36 ROL zp,x
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 37 NOP ------- 65C02
|
|
"0000" & "000001" & implied & aluInSet & aluFlg, -- 38 SEC
|
|
"1000" & "100010" & readAbsY & aluInT & aluAnd, -- 39 AND abs,y
|
|
"1000" & "100010" & implied & aluInA & aluDec, -- 3A DEC accu -------- 65C12
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 3B NOP ------- 65C02
|
|
"0000" & "110010" & readAbsX & aluInT & aluBit, -- 3C BIT abs,x ------- 65C02
|
|
"1000" & "100010" & readAbsX & aluInT & aluAnd, -- 3D AND abs,x
|
|
"0000" & "100011" & rmwAbsX & aluInT & aluRol, -- 3E ROL abs,x
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 3F NOP ------- 65C02
|
|
-- AXYS NVDIZC addressing aluInput aluMode
|
|
"0000" & "111111" & rti & aluInT & aluFlg, -- 40 RTI
|
|
"1000" & "100010" & readIndX & aluInT & aluEor, -- 41 EOR (zp,x)
|
|
"0000" & "000000" & immediate & aluInXXX & aluXXX, -- 42 NOP ------- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 43 NOP ------- 65C02
|
|
"0000" & "000000" & immediate & aluInXXX & aluXXX, -- 44 NOP ------- 65C02
|
|
"1000" & "100010" & readZp & aluInT & aluEor, -- 45 EOR zp
|
|
"0000" & "100011" & rmwZp & aluInT & aluLsr, -- 46 LSR zp
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 47 NOP ------- 65C02
|
|
"0000" & "000000" & push & aluInA & aluInp, -- 48 PHA
|
|
"1000" & "100010" & immediate & aluInT & aluEor, -- 49 EOR imm
|
|
"1000" & "100011" & implied & aluInA & aluLsr, -- 4A LSR accu -------- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 4B NOP ------- 65C02
|
|
"0000" & "000000" & jumpAbs & aluInXXX & aluXXX, -- 4C JMP abs
|
|
"1000" & "100010" & readAbs & aluInT & aluEor, -- 4D EOR abs
|
|
"0000" & "100011" & rmwAbs & aluInT & aluLsr, -- 4E LSR abs
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 4F NOP ------- 65C02
|
|
"0000" & "000000" & relative & aluInXXX & aluXXX, -- 50 BVC
|
|
"1000" & "100010" & readIndY & aluInT & aluEor, -- 51 EOR (zp),y
|
|
"1000" & "100010" & readInd & aluInT & aluEor, -- 52 EOR (zp) -------- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 53 NOP ------- 65C02
|
|
"0000" & "000000" & immediate & aluInXXX & aluXXX, -- 54 NOP ------- 65C02
|
|
"1000" & "100010" & readZpX & aluInT & aluEor, -- 55 EOR zp,x
|
|
"0000" & "100011" & rmwZpX & aluInT & aluLsr, -- 56 LSR zp,x
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 57 NOP ------- 65C02
|
|
"0000" & "000100" & implied & aluInClr & aluXXX, -- 58 CLI
|
|
"1000" & "100010" & readAbsY & aluInT & aluEor, -- 59 EOR abs,y
|
|
"0000" & "000000" & push & aluInY & aluInp, -- 5A PHY ------------- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 5B NOP ------- 65C02
|
|
"0000" & "000000" & readAbs & aluInXXX & aluXXX, -- 5C NOP ------- 65C02
|
|
"1000" & "100010" & readAbsX & aluInT & aluEor, -- 5D EOR abs,x
|
|
"0000" & "100011" & rmwAbsX & aluInT & aluLsr, -- 5E LSR abs,x
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 5F NOP ------- 65C02
|
|
-- AXYS NVDIZC addressing aluInput aluMode
|
|
"0000" & "000000" & rts & aluInXXX & aluXXX, -- 60 RTS
|
|
"1000" & "110011" & readIndX & aluInT & aluAdc, -- 61 ADC (zp,x)
|
|
"0000" & "000000" & immediate & aluInXXX & aluXXX, -- 62 NOP ------- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 63 NOP ------- 65C02
|
|
"0000" & "000000" & writeZp & aluInClr & aluInp, -- 64 STZ zp ---------- 65C02
|
|
"1000" & "110011" & readZp & aluInT & aluAdc, -- 65 ADC zp
|
|
"0000" & "100011" & rmwZp & aluInT & aluRor, -- 66 ROR zp
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 67 NOP ------- 65C02
|
|
"1000" & "100010" & pop & aluInT & aluInp, -- 68 PLA
|
|
"1000" & "110011" & immediate & aluInT & aluAdc, -- 69 ADC imm
|
|
"1000" & "100011" & implied & aluInA & aluRor, -- 6A ROR accu
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 6B NOP ------ 65C02
|
|
"0000" & "000000" & jumpInd & aluInXXX & aluXXX, -- 6C JMP indirect
|
|
"1000" & "110011" & readAbs & aluInT & aluAdc, -- 6D ADC abs
|
|
"0000" & "100011" & rmwAbs & aluInT & aluRor, -- 6E ROR abs
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 6F NOP ------ 65C02
|
|
"0000" & "000000" & relative & aluInXXX & aluXXX, -- 70 BVS
|
|
"1000" & "110011" & readIndY & aluInT & aluAdc, -- 71 ADC (zp),y
|
|
"1000" & "110011" & readInd & aluInT & aluAdc, -- 72 ADC (zp) -------- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 73 NOP ------ 65C02
|
|
"0000" & "000000" & writeZpX & aluInClr & aluInp, -- 74 STZ zp,x -------- 65C02
|
|
"1000" & "110011" & readZpX & aluInT & aluAdc, -- 75 ADC zp,x
|
|
"0000" & "100011" & rmwZpX & aluInT & aluRor, -- 76 ROR zp,x
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 77 NOP ----- 65C02
|
|
"0000" & "000100" & implied & aluInSet & aluXXX, -- 78 SEI
|
|
"1000" & "110011" & readAbsY & aluInT & aluAdc, -- 79 ADC abs,y
|
|
"0010" & "100010" & pop & aluInT & aluInp, -- 7A PLY ------------- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 7B NOP ----- 65C02
|
|
"0000" & "000000" & jumpIndX & aluInXXX & aluXXX, -- 7C JMP indirect,x -- 65C02
|
|
--"0000" & "000000" & jumpInd & aluInXXX & aluXXX, -- 6C JMP indirect
|
|
"1000" & "110011" & readAbsX & aluInT & aluAdc, -- 7D ADC abs,x
|
|
"0000" & "100011" & rmwAbsX & aluInT & aluRor, -- 7E ROR abs,x
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 7F NOP ----- 65C02
|
|
-- AXYS NVDIZC addressing aluInput aluMode
|
|
"0000" & "000000" & relative & aluInXXX & aluXXX, -- 80 BRA ----------- 65C02
|
|
"0000" & "000000" & writeIndX & aluInA & aluInp, -- 81 STA (zp,x)
|
|
"0000" & "000000" & immediate & aluInXXX & aluXXX, -- 82 NOP ----- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 83 NOP ----- 65C02
|
|
"0000" & "000000" & writeZp & aluInY & aluInp, -- 84 STY zp
|
|
"0000" & "000000" & writeZp & aluInA & aluInp, -- 85 STA zp
|
|
"0000" & "000000" & writeZp & aluInX & aluInp, -- 86 STX zp
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 87 NOP ----- 65C02
|
|
"0010" & "100010" & implied & aluInY & aluDec, -- 88 DEY
|
|
"0000" & "000010" & immediate & aluInT & aluBit, -- 89 BIT imm ------- 65C02
|
|
"1000" & "100010" & implied & aluInX & aluInp, -- 8A TXA
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 8B NOP ----- 65C02
|
|
"0000" & "000000" & writeAbs & aluInY & aluInp, -- 8C STY abs ------- 65C02
|
|
"0000" & "000000" & writeAbs & aluInA & aluInp, -- 8D STA abs
|
|
"0000" & "000000" & writeAbs & aluInX & aluInp, -- 8E STX abs
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 8F NOP ----- 65C02
|
|
"0000" & "000000" & relative & aluInXXX & aluXXX, -- 90 BCC
|
|
"0000" & "000000" & writeIndY & aluInA & aluInp, -- 91 STA (zp),y
|
|
"0000" & "000000" & writeInd & aluInA & aluInp, -- 92 STA (zp) ------ 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 93 NOP ----- 65C02
|
|
"0000" & "000000" & writeZpX & aluInY & aluInp, -- 94 STY zp,x
|
|
"0000" & "000000" & writeZpX & aluInA & aluInp, -- 95 STA zp,x
|
|
"0000" & "000000" & writeZpY & aluInX & aluInp, -- 96 STX zp,y
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 97 NOP ----- 65C02
|
|
"1000" & "100010" & implied & aluInY & aluInp, -- 98 TYA
|
|
"0000" & "000000" & writeAbsY & aluInA & aluInp, -- 99 STA abs,y
|
|
"0001" & "000000" & implied & aluInX & aluInp, -- 9A TXS
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 9B NOP ----- 65C02
|
|
"0000" & "000000" & writeAbs & aluInClr & aluInp, -- 9C STZ Abs ------- 65C02
|
|
"0000" & "000000" & writeAbsX & aluInA & aluInp, -- 9D STA abs,x
|
|
"0000" & "000000" & writeAbsX & aluInClr & aluInp, -- 9C STZ Abs,x ----- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- 9F NOP ----- 65C02
|
|
-- AXYS NVDIZC addressing aluInput aluMode
|
|
"0010" & "100010" & immediate & aluInT & aluInp, -- A0 LDY imm
|
|
"1000" & "100010" & readIndX & aluInT & aluInp, -- A1 LDA (zp,x)
|
|
"0100" & "100010" & immediate & aluInT & aluInp, -- A2 LDX imm
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- A3 NOP ----- 65C02
|
|
"0010" & "100010" & readZp & aluInT & aluInp, -- A4 LDY zp
|
|
"1000" & "100010" & readZp & aluInT & aluInp, -- A5 LDA zp
|
|
"0100" & "100010" & readZp & aluInT & aluInp, -- A6 LDX zp
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- A7 NOP ----- 65C02
|
|
"0010" & "100010" & implied & aluInA & aluInp, -- A8 TAY
|
|
"1000" & "100010" & immediate & aluInT & aluInp, -- A9 LDA imm
|
|
"0100" & "100010" & implied & aluInA & aluInp, -- AA TAX
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- AB NOP ----- 65C02
|
|
"0010" & "100010" & readAbs & aluInT & aluInp, -- AC LDY abs
|
|
"1000" & "100010" & readAbs & aluInT & aluInp, -- AD LDA abs
|
|
"0100" & "100010" & readAbs & aluInT & aluInp, -- AE LDX abs
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- AF NOP ----- 65C02
|
|
"0000" & "000000" & relative & aluInXXX & aluXXX, -- B0 BCS
|
|
"1000" & "100010" & readIndY & aluInT & aluInp, -- B1 LDA (zp),y
|
|
"1000" & "100010" & readInd & aluInT & aluInp, -- B2 LDA (zp) ------ 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- B3 NOP ----- 65C02
|
|
"0010" & "100010" & readZpX & aluInT & aluInp, -- B4 LDY zp,x
|
|
"1000" & "100010" & readZpX & aluInT & aluInp, -- B5 LDA zp,x
|
|
"0100" & "100010" & readZpY & aluInT & aluInp, -- B6 LDX zp,y
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- B7 NOP ----- 65C02
|
|
"0000" & "010000" & implied & aluInClr & aluFlg, -- B8 CLV
|
|
"1000" & "100010" & readAbsY & aluInT & aluInp, -- B9 LDA abs,y
|
|
"0100" & "100010" & implied & aluInS & aluInp, -- BA TSX
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- BB NOP ----- 65C02
|
|
"0010" & "100010" & readAbsX & aluInT & aluInp, -- BC LDY abs,x
|
|
"1000" & "100010" & readAbsX & aluInT & aluInp, -- BD LDA abs,x
|
|
"0100" & "100010" & readAbsY & aluInT & aluInp, -- BE LDX abs,y
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- BF NOP ----- 65C02
|
|
-- AXYS NVDIZC addressing aluInput aluMode
|
|
"0000" & "100011" & immediate & aluInT & aluCpy, -- C0 CPY imm
|
|
"0000" & "100011" & readIndX & aluInT & aluCmp, -- C1 CMP (zp,x)
|
|
"0000" & "000000" & immediate & aluInXXX & aluXXX, -- C2 NOP ----- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- C3 NOP ----- 65C02
|
|
"0000" & "100011" & readZp & aluInT & aluCpy, -- C4 CPY zp
|
|
"0000" & "100011" & readZp & aluInT & aluCmp, -- C5 CMP zp
|
|
"0000" & "100010" & rmwZp & aluInT & aluDec, -- C6 DEC zp
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- C7 NOP ----- 65C02
|
|
"0010" & "100010" & implied & aluInY & aluInc, -- C8 INY
|
|
"0000" & "100011" & immediate & aluInT & aluCmp, -- C9 CMP imm
|
|
"0100" & "100010" & implied & aluInX & aluDec, -- CA DEX
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- CB NOP ----- 65C02
|
|
"0000" & "100011" & readAbs & aluInT & aluCpy, -- CC CPY abs
|
|
"0000" & "100011" & readAbs & aluInT & aluCmp, -- CD CMP abs
|
|
"0000" & "100010" & rmwAbs & aluInT & aluDec, -- CE DEC abs
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- CF NOP ----- 65C02
|
|
"0000" & "000000" & relative & aluInXXX & aluXXX, -- D0 BNE
|
|
"0000" & "100011" & readIndY & aluInT & aluCmp, -- D1 CMP (zp),y
|
|
"0000" & "100011" & readInd & aluInT & aluCmp, -- D2 CMP (zp) ------ 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- D3 NOP ----- 65C02
|
|
"0000" & "000000" & immediate & aluInXXX & aluXXX, -- D4 NOP ----- 65C02
|
|
"0000" & "100011" & readZpX & aluInT & aluCmp, -- D5 CMP zp,x
|
|
"0000" & "100010" & rmwZpX & aluInT & aluDec, -- D6 DEC zp,x
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- D7 NOP ----- 65C02
|
|
"0000" & "001000" & implied & aluInClr & aluXXX, -- D8 CLD
|
|
"0000" & "100011" & readAbsY & aluInT & aluCmp, -- D9 CMP abs,y
|
|
"0000" & "000000" & push & aluInX & aluInp, -- DA PHX ----------- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- DB NOP ----- 65C02
|
|
"0000" & "000000" & readAbs & aluInXXX & aluXXX, -- DC NOP ----- 65C02
|
|
"0000" & "100011" & readAbsX & aluInT & aluCmp, -- DD CMP abs,x
|
|
"0000" & "100010" & rmwAbsX & aluInT & aluDec, -- DE DEC abs,x
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- DF NOP ----- 65C02
|
|
-- AXYS NVDIZC addressing aluInput aluMode
|
|
"0000" & "100011" & immediate & aluInT & aluCpx, -- E0 CPX imm
|
|
"1000" & "110011" & readIndX & aluInT & aluSbc, -- E1 SBC (zp,x)
|
|
"0000" & "000000" & immediate & aluInXXX & aluXXX, -- E2 NOP ----- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- E3 NOP ----- 65C02
|
|
"0000" & "100011" & readZp & aluInT & aluCpx, -- E4 CPX zp
|
|
"1000" & "110011" & readZp & aluInT & aluSbc, -- E5 SBC zp
|
|
"0000" & "100010" & rmwZp & aluInT & aluInc, -- E6 INC zp
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- E7 NOP ----- 65C02
|
|
"0100" & "100010" & implied & aluInX & aluInc, -- E8 INX
|
|
"1000" & "110011" & immediate & aluInT & aluSbc, -- E9 SBC imm
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- EA NOP
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- EB NOP ----- 65C02
|
|
"0000" & "100011" & readAbs & aluInT & aluCpx, -- EC CPX abs
|
|
"1000" & "110011" & readAbs & aluInT & aluSbc, -- ED SBC abs
|
|
"0000" & "100010" & rmwAbs & aluInT & aluInc, -- EE INC abs
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- EF NOP ----- 65C02
|
|
"0000" & "000000" & relative & aluInXXX & aluXXX, -- F0 BEQ
|
|
"1000" & "110011" & readIndY & aluInT & aluSbc, -- F1 SBC (zp),y
|
|
"1000" & "110011" & readInd & aluInT & aluSbc, -- F2 SBC (zp) ------ 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- F3 NOP ----- 65C02
|
|
"0000" & "000000" & immediate & aluInXXX & aluXXX, -- F4 NOP ----- 65C02
|
|
"1000" & "110011" & readZpX & aluInT & aluSbc, -- F5 SBC zp,x
|
|
"0000" & "100010" & rmwZpX & aluInT & aluInc, -- F6 INC zp,x
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- F7 NOP ---- 65C02
|
|
"0000" & "001000" & implied & aluInSet & aluXXX, -- F8 SED
|
|
"1000" & "110011" & readAbsY & aluInT & aluSbc, -- F9 SBC abs,y
|
|
"0100" & "100010" & pop & aluInT & aluInp, -- FA PLX ----------- 65C02
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX, -- FB NOP ----- 65C02
|
|
"0000" & "000000" & readAbs & aluInXXX & aluXXX, -- FC NOP ----- 65C02
|
|
"1000" & "110011" & readAbsX & aluInT & aluSbc, -- FD SBC abs,x
|
|
"0000" & "100010" & rmwAbsX & aluInT & aluInc, -- FE INC abs,x
|
|
"0000" & "000000" & implied & aluInXXX & aluXXX -- FF NOP ----- 65C02
|
|
);
|
|
signal opcInfo : decodedBitsDef;
|
|
signal nextOpcInfo : decodedBitsDef; -- Next opcode (decoded)
|
|
signal nextOpcInfoReg : decodedBitsDef; -- Next opcode (decoded) pipelined
|
|
signal theOpcode : unsigned(7 downto 0);
|
|
signal nextOpcode : unsigned(7 downto 0);
|
|
|
|
-- Program counter
|
|
signal PC : unsigned(15 downto 0); -- Program counter
|
|
|
|
-- Address generation
|
|
type nextAddrDef is (
|
|
nextAddrHold,
|
|
nextAddrIncr,
|
|
nextAddrIncrL, -- Increment low bits only (zeropage accesses)
|
|
nextAddrIncrH, -- Increment high bits only (page-boundary)
|
|
nextAddrDecrH, -- Decrement high bits (branch backwards)
|
|
nextAddrPc,
|
|
nextAddrIrq,
|
|
nextAddrReset,
|
|
nextAddrAbs,
|
|
nextAddrAbsIndexed,
|
|
nextAddrZeroPage,
|
|
nextAddrZPIndexed,
|
|
nextAddrStack,
|
|
nextAddrRelative
|
|
);
|
|
signal nextAddr : nextAddrDef;
|
|
signal myAddr : unsigned(15 downto 0);
|
|
signal myAddrIncr : unsigned(15 downto 0);
|
|
signal myAddrIncrH : unsigned(7 downto 0);
|
|
signal myAddrDecrH : unsigned(7 downto 0);
|
|
signal theWe : std_logic;
|
|
signal irqActive : std_logic;
|
|
-- Output register
|
|
signal doReg : unsigned(7 downto 0);
|
|
-- Buffer register
|
|
signal T : unsigned(7 downto 0);
|
|
-- General registers
|
|
signal A: unsigned(7 downto 0); -- Accumulator
|
|
signal X: unsigned(7 downto 0); -- Index X
|
|
signal Y: unsigned(7 downto 0); -- Index Y
|
|
signal S: unsigned(7 downto 0); -- stack pointer
|
|
-- Status register
|
|
signal C: std_logic; -- Carry
|
|
signal Z: std_logic; -- Zero flag
|
|
signal I: std_logic; -- Interrupt flag
|
|
signal D: std_logic; -- Decimal mode
|
|
signal B: std_logic; -- Break software interrupt
|
|
signal R: std_logic; -- always 1
|
|
signal V: std_logic; -- Overflow
|
|
signal N: std_logic; -- Negative
|
|
|
|
-- ALU
|
|
-- ALU input
|
|
signal aluInput : unsigned(7 downto 0);
|
|
signal aluCmpInput : unsigned(7 downto 0);
|
|
-- ALU output
|
|
signal aluRegisterOut : unsigned(7 downto 0);
|
|
signal aluRmwOut : unsigned(7 downto 0);
|
|
signal aluC : std_logic;
|
|
signal aluZ : std_logic;
|
|
signal aluV : std_logic;
|
|
signal aluN : std_logic;
|
|
-- Indexing
|
|
signal indexOut : unsigned(8 downto 0);
|
|
|
|
signal realbrk : std_logic;
|
|
begin
|
|
processAluInput: process(clk, opcInfo, A, X, Y, T, S)
|
|
variable temp : unsigned(7 downto 0);
|
|
begin
|
|
temp := (others => '1');
|
|
|
|
if opcInfo(opcInA) = '1' then
|
|
temp := temp and A;
|
|
end if;
|
|
if opcInfo(opcInX) = '1' then
|
|
temp := temp and X;
|
|
end if;
|
|
if opcInfo(opcInY) = '1' then
|
|
temp := temp and Y;
|
|
end if;
|
|
if opcInfo(opcInS) = '1' then
|
|
temp := temp and S;
|
|
end if;
|
|
if opcInfo(opcInT) = '1' then
|
|
temp := temp and T;
|
|
end if;
|
|
if opcInfo(opcInBrk) = '1' then
|
|
temp := temp and "11100111"; -- also DMB clear D (bit 3)
|
|
end if;
|
|
if opcInfo(opcInClear) = '1' then
|
|
temp := (others => '0');
|
|
end if;
|
|
|
|
aluInput <= temp;
|
|
|
|
end process;
|
|
|
|
processCmpInput: process(clk, opcInfo, A, X, Y)
|
|
variable temp : unsigned(7 downto 0);
|
|
begin
|
|
temp := (others => '1');
|
|
if opcInfo(opcInCmp) = '1' then
|
|
temp := temp and A;
|
|
end if;
|
|
if opcInfo(opcInCpx) = '1' then
|
|
temp := temp and X;
|
|
end if;
|
|
if opcInfo(opcInCpy) = '1' then
|
|
temp := temp and Y;
|
|
end if;
|
|
|
|
aluCmpInput <= temp;
|
|
end process;
|
|
|
|
-- ALU consists of two parts
|
|
-- Read-Modify-Write or index instructions: INC/DEC/ASL/LSR/ROR/ROL
|
|
-- Accumulator instructions: ADC, SBC, EOR, AND, EOR, ORA
|
|
-- Some instructions are both RMW and accumulator so for most
|
|
-- instructions the rmw results are routed through accu alu too.
|
|
|
|
-- The B flag
|
|
------------
|
|
--No actual "B" flag exists inside the 6502's processor status register. The B
|
|
--flag only exists in the status flag byte pushed to the stack. Naturally,
|
|
--when the flags are restored (via PLP or RTI), the B bit is discarded.
|
|
--
|
|
--Depending on the means, the B status flag will be pushed to the stack as
|
|
--either 0 or 1.
|
|
--
|
|
--software instructions BRK & PHP will push the B flag as being 1.
|
|
--hardware interrupts IRQ & NMI will push the B flag as being 0.
|
|
|
|
|
|
processAlu: process(clk, opcInfo, aluInput, aluCmpInput, A, T, irqActive, N, V, D, I, Z, C)
|
|
variable lowBits: unsigned(5 downto 0);
|
|
variable nineBits: unsigned(8 downto 0);
|
|
variable rmwBits: unsigned(8 downto 0);
|
|
variable tsxBits: unsigned(8 downto 0);
|
|
|
|
variable varC : std_logic;
|
|
variable varZ : std_logic;
|
|
variable varV : std_logic;
|
|
variable varN : std_logic;
|
|
begin
|
|
lowBits := (others => '-');
|
|
nineBits := (others => '-');
|
|
rmwBits := (others => '-');
|
|
tsxBits := (others => '-');
|
|
R <= '1';
|
|
|
|
|
|
-- Shift unit
|
|
case opcInfo(aluMode1From to aluMode1To) is
|
|
when aluModeInp => rmwBits := C & aluInput;
|
|
when aluModeP => rmwBits := C & N & V & R & (not irqActive) & D & I & Z & C; -- irqActive
|
|
when aluModeInc => rmwBits := C & (aluInput + 1);
|
|
when aluModeDec => rmwBits := C & (aluInput - 1);
|
|
when aluModeAsl => rmwBits := aluInput & "0";
|
|
when aluModeTSB => rmwBits := "0" & (aluInput(7 downto 0) or A); -- added by alan for 65c02
|
|
tsxBits := "0" & (aluInput(7 downto 0) and A);
|
|
when aluModeTRB => rmwBits := "0" & (aluInput(7 downto 0) and (not A)); -- added by alan for 65c02
|
|
tsxBits := "0" & (aluInput(7 downto 0) and A);
|
|
when aluModeFlg => rmwBits := aluInput(0) & aluInput;
|
|
when aluModeLsr => rmwBits := aluInput(0) & "0" & aluInput(7 downto 1);
|
|
when aluModeRol => rmwBits := aluInput & C;
|
|
when aluModeRoR => rmwBits := aluInput(0) & C & aluInput(7 downto 1);
|
|
when others => rmwBits := C & aluInput;
|
|
end case;
|
|
|
|
-- ALU
|
|
case opcInfo(aluMode2From to aluMode2To) is
|
|
when aluModeAdc => lowBits := ("0" & A(3 downto 0) & rmwBits(8)) + ("0" & rmwBits(3 downto 0) & "1");
|
|
ninebits := ("0" & A) + ("0" & rmwBits(7 downto 0)) + (B"00000000" & rmwBits(8));
|
|
when aluModeSbc => lowBits := ("0" & A(3 downto 0) & rmwBits(8)) + ("0" & (not rmwBits(3 downto 0)) & "1");
|
|
ninebits := ("0" & A) + ("0" & (not rmwBits(7 downto 0))) + (B"00000000" & rmwBits(8));
|
|
when aluModeCmp => ninebits := ("0" & aluCmpInput) + ("0" & (not rmwBits(7 downto 0))) + "000000001";
|
|
when aluModeAnd => ninebits := rmwBits(8) & (A and rmwBits(7 downto 0));
|
|
when aluModeEor => ninebits := rmwBits(8) & (A xor rmwBits(7 downto 0));
|
|
when aluModeOra => ninebits := rmwBits(8) & (A or rmwBits(7 downto 0));
|
|
when aluModeNoF => ninebits := "000110000";
|
|
when others => ninebits := rmwBits;
|
|
end case;
|
|
|
|
|
|
varV := aluInput(6); -- Default for BIT / PLP / RTI
|
|
|
|
|
|
if (opcInfo(aluMode1From to aluMode1To) = aluModeFlg) then
|
|
varZ := rmwBits(1);
|
|
elsif (opcInfo(aluMode1From to aluMode1To) = aluModeTSB) or (opcInfo(aluMode1From to aluMode1To) = aluModeTRB) then
|
|
if tsxBits(7 downto 0) = X"00" then
|
|
varZ := '1';
|
|
else
|
|
varZ := '0';
|
|
end if;
|
|
elsif ninebits(7 downto 0) = X"00" then
|
|
varZ := '1';
|
|
else
|
|
varZ := '0';
|
|
end if;
|
|
|
|
if (opcInfo(aluMode1From to aluMode1To) = aluModeBit) or (opcInfo(aluMode1From to aluMode1To) = aluModeFlg) then
|
|
varN := rmwBits(7);
|
|
else
|
|
varN := nineBits(7);
|
|
end if;
|
|
|
|
varC := ninebits(8);
|
|
|
|
case opcInfo(aluMode2From to aluMode2To) is
|
|
-- Flags Affected: n v — — — — z c
|
|
-- n Set if most significant bit of result is set; else cleared.
|
|
-- v Set if signed overflow; cleared if valid signed result.
|
|
-- z Set if result is zero; else cleared.
|
|
-- c Set if unsigned overflow; cleared if valid unsigned result
|
|
|
|
when aluModeAdc =>
|
|
-- decimal mode low bits correction, is done after setting Z flag.
|
|
if D = '1' then
|
|
if lowBits(5 downto 1) > 9 then
|
|
ninebits(3 downto 0) := ninebits(3 downto 0) + 6;
|
|
if lowBits(5) = '0' then
|
|
ninebits(8 downto 4) := ninebits(8 downto 4) + 1;
|
|
end if;
|
|
end if;
|
|
end if;
|
|
when others => null;
|
|
end case;
|
|
|
|
case opcInfo(aluMode2From to aluMode2To) is
|
|
when aluModeAdc =>
|
|
-- decimal mode high bits correction, is done after setting Z and N flags
|
|
varV := (A(7) xor ninebits(7)) and (rmwBits(7) xor ninebits(7));
|
|
if D = '1' then
|
|
if ninebits(8 downto 4) > 9 then
|
|
ninebits(8 downto 4) := ninebits(8 downto 4) + 6;
|
|
varC := '1';
|
|
end if;
|
|
end if;
|
|
|
|
when aluModeSbc =>
|
|
varV := (A(7) xor ninebits(7)) and ((not rmwBits(7)) xor ninebits(7));
|
|
if D = '1' then
|
|
-- Check for borrow (lower 4 bits)
|
|
if lowBits(5) = '0' then
|
|
ninebits(7 downto 0) := ninebits(7 downto 0) - 6;
|
|
end if;
|
|
-- Check for borrow (upper 4 bits)
|
|
if ninebits(8) = '0' then
|
|
ninebits(8 downto 4) := ninebits(8 downto 4) - 6;
|
|
end if;
|
|
end if;
|
|
when others => null;
|
|
end case;
|
|
|
|
-- fix n and z flag for 65c02 adc sbc instructions in decimal mode
|
|
case opcInfo(aluMode2From to aluMode2To) is
|
|
when aluModeAdc =>
|
|
if D = '1' then
|
|
if ninebits(7 downto 0) = X"00" then
|
|
varZ := '1';
|
|
else
|
|
varZ := '0';
|
|
end if;
|
|
varN := ninebits(7);
|
|
end if;
|
|
when aluModeSbc =>
|
|
if D = '1' then
|
|
if ninebits(7 downto 0) = X"00" then
|
|
varZ := '1';
|
|
else
|
|
varZ := '0';
|
|
end if;
|
|
varN := ninebits(7);
|
|
end if;
|
|
when others => null;
|
|
end case;
|
|
|
|
-- DMB Remove Pipelining
|
|
-- if rising_edge(clk) then
|
|
aluRmwOut <= rmwBits(7 downto 0);
|
|
aluRegisterOut <= ninebits(7 downto 0);
|
|
aluC <= varC;
|
|
aluZ <= varZ;
|
|
aluV <= varV;
|
|
aluN <= varN;
|
|
-- end if;
|
|
|
|
end process;
|
|
|
|
calcInterrupt: process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if enable = '1' then
|
|
if theCpuCycle = cycleStack4 or reset = '0' then
|
|
nmiReg <= '1';
|
|
end if;
|
|
if nextCpuCycle /= cycleBranchTaken and nextCpuCycle /= opcodeFetch then
|
|
irqReg <= irq_n;
|
|
nmiEdge <= nmi_n;
|
|
if (nmiEdge = '1') and (nmi_n = '0') then
|
|
nmiReg <= '0';
|
|
end if;
|
|
end if;
|
|
-- The 'or opcInfo(opcSetI)' prevents NMI immediately after BRK or IRQ.
|
|
-- Presumably this is done in the real 6502/6510 to prevent a double IRQ.
|
|
processIrq <= not ((nmiReg and (irqReg or I)) or opcInfo(opcIRQ));
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
--pipeirq: process(clk)
|
|
-- begin
|
|
-- if rising_edge(clk) then
|
|
-- if enable = '1' then
|
|
-- if (reset = '0') or (theCpuCycle = opcodeFetch) then
|
|
-- -- The 'or opcInfo(opcSetI)' prevents NMI immediately after BRK or IRQ.
|
|
-- -- Presumably this is done in the real 6502/6510 to prevent a double IRQ.
|
|
-- processIrq <= not ((nmiReg and (irqReg or I)) or opcInfo(opcIRQ));
|
|
-- end if;
|
|
-- end if;
|
|
-- end if;
|
|
-- end process;
|
|
|
|
calcNextOpcode: process(clk, di, reset, processIrq)
|
|
variable myNextOpcode : unsigned(7 downto 0);
|
|
begin
|
|
-- Next opcode is read from input unless a reset or IRQ is pending.
|
|
myNextOpcode := di;
|
|
|
|
if reset = '0' then
|
|
myNextOpcode := X"4C";
|
|
elsif processIrq = '1' then
|
|
myNextOpcode := X"00";
|
|
end if;
|
|
nextOpcode <= myNextOpcode;
|
|
end process;
|
|
|
|
nextOpcInfo <= opcodeInfoTable(to_integer(nextOpcode));
|
|
|
|
-- DMB Remove Pipelining
|
|
-- process(clk)
|
|
-- begin
|
|
-- if rising_edge(clk) then
|
|
nextOpcInfoReg <= nextOpcInfo;
|
|
-- end if;
|
|
-- end process;
|
|
|
|
-- Read bits and flags from opcodeInfoTable and store in opcInfo.
|
|
-- This info is used to control the execution of the opcode.
|
|
calcOpcInfo: process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if enable = '1' then
|
|
if (reset = '0') or (theCpuCycle = opcodeFetch) then
|
|
opcInfo <= nextOpcInfo;
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
calcTheOpcode: process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if enable = '1' then
|
|
if theCpuCycle = opcodeFetch then
|
|
irqActive <= '0';
|
|
if processIrq = '1' then
|
|
irqActive <= '1';
|
|
end if;
|
|
-- Fetch opcode
|
|
theOpcode <= nextOpcode;
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
-- -----------------------------------------------------------------------
|
|
-- State machine
|
|
-- -----------------------------------------------------------------------
|
|
process(enable, theCpuCycle, opcInfo)
|
|
begin
|
|
updateRegisters <= false;
|
|
if enable = '1' then
|
|
if opcInfo(opcRti) = '1' then
|
|
if theCpuCycle = cycleRead then
|
|
updateRegisters <= true;
|
|
end if;
|
|
elsif theCpuCycle = opcodeFetch then
|
|
updateRegisters <= true;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if enable = '1' then
|
|
theCpuCycle <= nextCpuCycle;
|
|
end if;
|
|
if reset = '0' then
|
|
theCpuCycle <= cycle2;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
-- Determine the next cpu cycle. After the last cycle we always
|
|
-- go to opcodeFetch to get the next opcode.
|
|
calcNextCpuCycle: process(theCpuCycle, opcInfo, theOpcode, nextOpcode, indexOut, T, N, V, C, Z)
|
|
begin
|
|
nextCpuCycle <= opcodeFetch;
|
|
|
|
case theCpuCycle is
|
|
when opcodeFetch =>
|
|
if nextOpcode(1 downto 0) = "11" then
|
|
nextCpuCycle <= opcodeFetch;
|
|
else
|
|
nextCpuCycle <= cycle2;
|
|
end if;
|
|
when cycle2 => if opcInfo(opcBranch) = '1' then
|
|
if (N = theOpcode(5) and theOpcode(7 downto 6) = "00")
|
|
or (V = theOpcode(5) and theOpcode(7 downto 6) = "01")
|
|
or (C = theOpcode(5) and theOpcode(7 downto 6) = "10")
|
|
or (Z = theOpcode(5) and theOpcode(7 downto 6) = "11")
|
|
or (theOpcode(7 downto 0) = x"80") then -- Branch condition is true
|
|
nextCpuCycle <= cycleBranchTaken;
|
|
end if;
|
|
elsif (opcInfo(opcStackUp) = '1') then
|
|
nextCpuCycle <= cycleStack1;
|
|
elsif opcInfo(opcStackAddr) = '1' and opcInfo(opcStackData) = '1' then
|
|
nextCpuCycle <= cycleStack2;
|
|
elsif opcInfo(opcStackAddr) = '1' then
|
|
nextCpuCycle <= cycleStack1;
|
|
elsif opcInfo(opcStackData) = '1' then
|
|
nextCpuCycle <= cycleWrite;
|
|
elsif opcInfo(opcAbsolute) = '1' then
|
|
nextCpuCycle <= cycle3;
|
|
elsif opcInfo(opcIndirect) = '1' then
|
|
if opcInfo(indexX) = '1' then
|
|
nextCpuCycle <= cyclePreIndirect;
|
|
else
|
|
nextCpuCycle <= cycleIndirect;
|
|
end if;
|
|
elsif opcInfo(opcZeroPage) = '1' then
|
|
if opcInfo(opcWrite) = '1' then
|
|
if (opcInfo(indexX) = '1') or (opcInfo(indexY) = '1') then
|
|
nextCpuCycle <= cyclePreWrite;
|
|
else
|
|
nextCpuCycle <= cycleWrite;
|
|
end if;
|
|
else
|
|
if (opcInfo(indexX) = '1') or (opcInfo(indexY) = '1') then
|
|
nextCpuCycle <= cyclePreRead;
|
|
else
|
|
nextCpuCycle <= cycleRead2;
|
|
end if;
|
|
end if;
|
|
elsif opcInfo(opcJump) = '1' then
|
|
nextCpuCycle <= cycleJump;
|
|
end if;
|
|
when cycle3 => nextCpuCycle <= cycleRead;
|
|
if opcInfo(opcWrite) = '1' then
|
|
if (opcInfo(indexX) = '1') or (opcInfo(indexY) = '1') then
|
|
nextCpuCycle <= cyclePreWrite;
|
|
else
|
|
nextCpuCycle <= cycleWrite;
|
|
end if;
|
|
end if;
|
|
if (opcInfo(opcIndirect) = '1') and (opcInfo(indexX) = '1') then
|
|
if opcInfo(opcWrite) = '1' then
|
|
nextCpuCycle <= cycleWrite;
|
|
else
|
|
nextCpuCycle <= cycleRead2;
|
|
end if;
|
|
end if;
|
|
when cyclePreIndirect => nextCpuCycle <= cycleIndirect;
|
|
when cycleIndirect => nextCpuCycle <= cycle3;
|
|
when cycleBranchTaken => if indexOut(8) /= T(7) then
|
|
nextCpuCycle <= cycleBranchPage;
|
|
end if;
|
|
when cyclePreRead => if opcInfo(opcZeroPage) = '1' then
|
|
nextCpuCycle <= cycleRead2;
|
|
end if;
|
|
when cycleRead =>
|
|
if opcInfo(opcJump) = '1' then
|
|
nextCpuCycle <= cycleJump;
|
|
elsif indexOut(8) = '1' then
|
|
nextCpuCycle <= cycleRead2;
|
|
elsif opcInfo(opcRmw) = '1' then
|
|
nextCpuCycle <= cycleRmw;
|
|
if opcInfo(indexX) = '1' or opcInfo(indexY) = '1' then
|
|
nextCpuCycle <= cycleRead2;
|
|
end if;
|
|
end if;
|
|
when cycleRead2 => if opcInfo(opcRmw) = '1' then
|
|
nextCpuCycle <= cycleRmw;
|
|
end if;
|
|
when cycleRmw => nextCpuCycle <= cycleWrite;
|
|
when cyclePreWrite => nextCpuCycle <= cycleWrite;
|
|
when cycleStack1 => nextCpuCycle <= cycleRead;
|
|
if opcInfo(opcStackAddr) = '1' then
|
|
nextCpuCycle <= cycleStack2;
|
|
end if;
|
|
when cycleStack2 => nextCpuCycle <= cycleStack3;
|
|
if opcInfo(opcRti) = '1' then
|
|
nextCpuCycle <= cycleRead;
|
|
end if;
|
|
if opcInfo(opcStackData) = '0' and opcInfo(opcStackUp) = '1' then
|
|
nextCpuCycle <= cycleJump;
|
|
end if;
|
|
when cycleStack3 => nextCpuCycle <= cycleRead;
|
|
if opcInfo(opcStackData) = '0' or opcInfo(opcStackUp) = '1' then
|
|
nextCpuCycle <= cycleJump;
|
|
elsif opcInfo(opcStackAddr) = '1' then
|
|
nextCpuCycle <= cycleStack4;
|
|
end if;
|
|
when cycleStack4 => nextCpuCycle <= cycleRead;
|
|
when cycleJump => if opcInfo(opcIncrAfter) = '1' then
|
|
nextCpuCycle <= cycleEnd;
|
|
end if;
|
|
when others => null;
|
|
end case;
|
|
end process;
|
|
|
|
-- -----------------------------------------------------------------------
|
|
-- T register
|
|
-- -----------------------------------------------------------------------
|
|
calcT: process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if enable = '1' then
|
|
case theCpuCycle is
|
|
when cycle2 => T <= di;
|
|
when cycleStack1 | cycleStack2 =>
|
|
if opcInfo(opcStackUp) = '1' then
|
|
if theOpcode = x"28" or theOpcode = x"40" then -- plp or rti pulling the flags off the stack
|
|
T <= (di or "00110000"); -- Read from stack
|
|
else
|
|
T <= di;
|
|
end if;
|
|
end if;
|
|
when cycleIndirect | cycleRead | cycleRead2 => T <= di;
|
|
when others => null;
|
|
end case;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
-- -----------------------------------------------------------------------
|
|
-- A register
|
|
-- -----------------------------------------------------------------------
|
|
process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if updateRegisters then
|
|
if opcInfo(opcUpdateA) = '1' then
|
|
A <= aluRegisterOut;
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
-- -----------------------------------------------------------------------
|
|
-- X register
|
|
-- -----------------------------------------------------------------------
|
|
process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if updateRegisters then
|
|
if opcInfo(opcUpdateX) = '1' then
|
|
X <= aluRegisterOut;
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
-- -----------------------------------------------------------------------
|
|
-- Y register
|
|
-- -----------------------------------------------------------------------
|
|
process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if updateRegisters then
|
|
if opcInfo(opcUpdateY) = '1' then
|
|
Y <= aluRegisterOut;
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
-- -----------------------------------------------------------------------
|
|
-- C flag
|
|
-- -----------------------------------------------------------------------
|
|
process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if updateRegisters then
|
|
if opcInfo(opcUpdateC) = '1' then
|
|
C <= aluC;
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
-- -----------------------------------------------------------------------
|
|
-- Z flag
|
|
-- -----------------------------------------------------------------------
|
|
process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if updateRegisters then
|
|
if opcInfo(opcUpdateZ) = '1' then
|
|
Z <= aluZ;
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
-- -----------------------------------------------------------------------
|
|
-- I flag interupt flag
|
|
-- -----------------------------------------------------------------------
|
|
process(clk, reset)
|
|
begin
|
|
if reset = '0' then
|
|
I <= '1';
|
|
elsif rising_edge(clk) then
|
|
if updateRegisters then
|
|
if opcInfo(opcUpdateI) = '1' then
|
|
I <= aluInput(2);
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
-- -----------------------------------------------------------------------
|
|
-- D flag
|
|
-- -----------------------------------------------------------------------
|
|
process(clk, reset)
|
|
begin
|
|
if reset = '0' then
|
|
D <= '0';
|
|
elsif rising_edge(clk) then
|
|
if updateRegisters then
|
|
if opcInfo(opcUpdateD) = '1' then
|
|
D <= aluInput(3);
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
-- -----------------------------------------------------------------------
|
|
-- V flag
|
|
-- -----------------------------------------------------------------------
|
|
process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if updateRegisters then
|
|
if opcInfo(opcUpdateV) = '1' then
|
|
V <= aluV;
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
-- -----------------------------------------------------------------------
|
|
-- N flag
|
|
-- -----------------------------------------------------------------------
|
|
process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if updateRegisters then
|
|
if opcInfo(opcUpdateN) = '1' then
|
|
N <= aluN;
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
-- -----------------------------------------------------------------------
|
|
-- Stack pointer
|
|
-- -----------------------------------------------------------------------
|
|
process(clk)
|
|
variable sIncDec : unsigned(7 downto 0);
|
|
variable updateFlag : boolean;
|
|
begin
|
|
if rising_edge(clk) then
|
|
|
|
if opcInfo(opcStackUp) = '1' then
|
|
sIncDec := S + 1;
|
|
else
|
|
sIncDec := S - 1;
|
|
end if;
|
|
|
|
if enable = '1' then
|
|
updateFlag := false;
|
|
case nextCpuCycle is
|
|
when cycleStack1 =>
|
|
if (opcInfo(opcStackUp) = '1') or (opcInfo(opcStackData) = '1') then
|
|
updateFlag := true;
|
|
end if;
|
|
|
|
when cycleStack2 => updateFlag := true;
|
|
when cycleStack3 => updateFlag := true;
|
|
when cycleStack4 => updateFlag := true;
|
|
when cycleRead => if opcInfo(opcRti) = '1' then
|
|
updateFlag := true;
|
|
end if;
|
|
when cycleWrite => if opcInfo(opcStackData) = '1' then
|
|
updateFlag := true;
|
|
end if;
|
|
when others => null;
|
|
end case;
|
|
|
|
if updateFlag then
|
|
S <= sIncDec;
|
|
end if;
|
|
|
|
end if;
|
|
|
|
if updateRegisters then
|
|
if opcInfo(opcUpdateS) = '1' then
|
|
S <= aluRegisterOut;
|
|
end if;
|
|
end if;
|
|
|
|
end if;
|
|
end process;
|
|
|
|
-- -----------------------------------------------------------------------
|
|
-- Data out
|
|
-- -----------------------------------------------------------------------
|
|
calcDo: process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if enable = '1' then
|
|
doReg <= aluRmwOut;
|
|
case nextCpuCycle is
|
|
when cycleStack2 => if opcInfo(opcIRQ) = '1' and irqActive = '0' then
|
|
doReg <= myAddrIncr(15 downto 8);
|
|
else
|
|
doReg <= PC(15 downto 8);
|
|
end if;
|
|
when cycleStack3 => doReg <= PC(7 downto 0);
|
|
when cycleRmw => doReg <= di; -- Read-modify-write write old value first.
|
|
when others => null;
|
|
end case;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
do <= doReg;
|
|
|
|
|
|
|
|
-- -----------------------------------------------------------------------
|
|
-- Write enable
|
|
-- -----------------------------------------------------------------------
|
|
calcWe: process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if enable = '1' then
|
|
theWe <= '1';
|
|
case nextCpuCycle is
|
|
when cycleStack1 =>
|
|
if opcInfo(opcStackUp) = '0' and ((opcInfo(opcStackAddr) = '0') or (opcInfo(opcStackData) = '1')) then
|
|
theWe <= '0';
|
|
end if;
|
|
when cycleStack2 | cycleStack3 | cycleStack4 =>
|
|
if opcInfo(opcStackUp) = '0' then
|
|
theWe <= '0';
|
|
end if;
|
|
when cycleRmw => theWe <= '0';
|
|
when cycleWrite => theWe <= '0';
|
|
when others => null;
|
|
end case;
|
|
end if;
|
|
end if;
|
|
--nwe <= theWe;
|
|
end process;
|
|
nwe <= theWe;
|
|
|
|
-- -----------------------------------------------------------------------
|
|
-- Program counter
|
|
-- -----------------------------------------------------------------------
|
|
calcPC: process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if enable = '1' then
|
|
case theCpuCycle is
|
|
when opcodeFetch => PC <= myAddr;
|
|
when cycle2 => if irqActive = '0' then
|
|
if opcInfo(opcSecondByte) = '1' then
|
|
PC <= myAddrIncr;
|
|
else
|
|
PC <= myAddr;
|
|
end if;
|
|
end if;
|
|
when cycle3 => if opcInfo(opcAbsolute) = '1' then
|
|
PC <= myAddrIncr;
|
|
end if;
|
|
when others => null;
|
|
end case;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
|
|
-- -----------------------------------------------------------------------
|
|
-- Address generation
|
|
-- -----------------------------------------------------------------------
|
|
calcNextAddr: process(theCpuCycle, opcInfo, indexOut, T, reset)
|
|
begin
|
|
nextAddr <= nextAddrIncr;
|
|
case theCpuCycle is
|
|
when cycle2 => if opcInfo(opcStackAddr) = '1' or opcInfo(opcStackData) = '1' then
|
|
nextAddr <= nextAddrStack;
|
|
elsif opcInfo(opcAbsolute) = '1' then
|
|
nextAddr <= nextAddrIncr;
|
|
elsif opcInfo(opcZeroPage) = '1' then
|
|
nextAddr <= nextAddrZeroPage;
|
|
elsif opcInfo(opcIndirect) = '1' then
|
|
nextAddr <= nextAddrZeroPage;
|
|
elsif opcInfo(opcSecondByte) = '1' then
|
|
nextAddr <= nextAddrIncr;
|
|
else
|
|
nextAddr <= nextAddrHold;
|
|
end if;
|
|
when cycle3 => if (opcInfo(opcIndirect) = '1') and (opcInfo(indexX) = '1') then
|
|
nextAddr <= nextAddrAbs;
|
|
else
|
|
nextAddr <= nextAddrAbsIndexed;
|
|
end if;
|
|
when cyclePreIndirect => nextAddr <= nextAddrZPIndexed;
|
|
when cycleIndirect => nextAddr <= nextAddrIncrL;
|
|
when cycleBranchTaken => nextAddr <= nextAddrRelative;
|
|
when cycleBranchPage => if T(7) = '0' then
|
|
nextAddr <= nextAddrIncrH;
|
|
else
|
|
nextAddr <= nextAddrDecrH;
|
|
end if;
|
|
when cyclePreRead => nextAddr <= nextAddrZPIndexed;
|
|
when cycleRead => nextAddr <= nextAddrPc;
|
|
if opcInfo(opcJump) = '1' then
|
|
-- Emulate 6510 bug, jmp(xxFF) fetches from same page.
|
|
-- Replace with nextAddrIncr if emulating 65C02 or later cpu.
|
|
nextAddr <= nextAddrIncr;
|
|
--nextAddr <= nextAddrIncrL;
|
|
elsif indexOut(8) = '1' then
|
|
nextAddr <= nextAddrIncrH;
|
|
elsif opcInfo(opcRmw) = '1' then
|
|
nextAddr <= nextAddrHold;
|
|
end if;
|
|
when cycleRead2 => nextAddr <= nextAddrPc;
|
|
if opcInfo(opcRmw) = '1' then
|
|
nextAddr <= nextAddrHold;
|
|
end if;
|
|
when cycleRmw => nextAddr <= nextAddrHold;
|
|
when cyclePreWrite => nextAddr <= nextAddrHold;
|
|
if opcInfo(opcZeroPage) = '1' then
|
|
nextAddr <= nextAddrZPIndexed;
|
|
elsif indexOut(8) = '1' then
|
|
nextAddr <= nextAddrIncrH;
|
|
end if;
|
|
when cycleWrite => nextAddr <= nextAddrPc;
|
|
when cycleStack1 => nextAddr <= nextAddrStack;
|
|
when cycleStack2 => nextAddr <= nextAddrStack;
|
|
when cycleStack3 => nextAddr <= nextAddrStack;
|
|
if opcInfo(opcStackData) = '0' then
|
|
nextAddr <= nextAddrPc;
|
|
end if;
|
|
when cycleStack4 => nextAddr <= nextAddrIrq;
|
|
when cycleJump => nextAddr <= nextAddrAbs;
|
|
|
|
|
|
when others => null;
|
|
end case;
|
|
|
|
if reset = '0' then
|
|
nextAddr <= nextAddrReset;
|
|
end if;
|
|
|
|
end process;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
indexAlu: process(opcInfo, myAddr, T, X, Y)
|
|
begin
|
|
if opcInfo(indexX) = '1' then
|
|
indexOut <= (B"0" & T) + (B"0" & X);
|
|
elsif opcInfo(indexY) = '1' then
|
|
indexOut <= (B"0" & T) + (B"0" & Y);
|
|
elsif opcInfo(opcBranch) = '1' then
|
|
indexOut <= (B"0" & T) + (B"0" & myAddr(7 downto 0));
|
|
else
|
|
indexOut <= B"0" & T;
|
|
end if;
|
|
end process;
|
|
|
|
calcAddr: process(clk)
|
|
begin
|
|
if rising_edge(clk) then
|
|
if enable = '1' then
|
|
case nextAddr is
|
|
when nextAddrIncr => myAddr <= myAddrIncr;
|
|
when nextAddrIncrL => myAddr(7 downto 0) <= myAddrIncr(7 downto 0);
|
|
when nextAddrIncrH => myAddr(15 downto 8) <= myAddrIncrH;
|
|
when nextAddrDecrH => myAddr(15 downto 8) <= myAddrDecrH;
|
|
when nextAddrPc => myAddr <= PC;
|
|
when nextAddrIrq =>myAddr <= X"FFFE";
|
|
if nmiReg = '0' then
|
|
myAddr <= X"FFFA";
|
|
end if;
|
|
when nextAddrReset => myAddr <= X"FFFC";
|
|
when nextAddrAbs => myAddr <= di & T;
|
|
when nextAddrAbsIndexed =>--myAddr <= di & indexOut(7 downto 0);
|
|
if theOpcode = x"7C" then
|
|
myAddr <= (di & T) + (x"00"& X);
|
|
else
|
|
myAddr <= di & indexOut(7 downto 0);
|
|
end if;
|
|
when nextAddrZeroPage => myAddr <= "00000000" & di;
|
|
when nextAddrZPIndexed => myAddr <= "00000000" & indexOut(7 downto 0);
|
|
when nextAddrStack => myAddr <= "00000001" & S;
|
|
when nextAddrRelative => myAddr(7 downto 0) <= indexOut(7 downto 0);
|
|
when others => null;
|
|
end case;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
myAddrIncr <= myAddr + 1;
|
|
myAddrIncrH <= myAddr(15 downto 8) + 1;
|
|
myAddrDecrH <= myAddr(15 downto 8) - 1;
|
|
addr <= myAddr;
|
|
|
|
-- DMB This looked plain broken and inferred a latch
|
|
--
|
|
-- calcsync: process(clk)
|
|
-- begin
|
|
--
|
|
-- if enable = '1' then
|
|
-- case theCpuCycle is
|
|
-- when opcodeFetch => sync <= '1';
|
|
-- when others => sync <= '0';
|
|
-- end case;
|
|
-- end if;
|
|
-- end process;
|
|
|
|
sync <= '1' when theCpuCycle = opcodeFetch else '0';
|
|
|
|
sync_irq <= irqActive;
|
|
|
|
Regs <= std_logic_vector(myAddr) &
|
|
"00000001" & std_logic_vector(S)&
|
|
N & V & R & B & D & I & Z & C &
|
|
std_logic_vector(Y) &
|
|
std_logic_vector(X) &
|
|
std_logic_vector(A);
|
|
|
|
end architecture;
|