1
0
mirror of https://github.com/TomHarte/CLK.git synced 2024-11-19 08:31:11 +00:00
CLK/Machines/PCCompatible/MDA.hpp

221 lines
6.4 KiB
C++
Raw Normal View History

2023-12-05 21:38:09 +00:00
//
// MDA.hpp
// Clock Signal
//
// Created by Thomas Harte on 05/12/2023.
// Copyright © 2023 Thomas Harte. All rights reserved.
//
#ifndef MDA_h
#define MDA_h
#include "../../Components/6845/CRTC6845.hpp"
#include "../../Outputs/CRT/CRT.hpp"
#include "../../Machines/Utility/ROMCatalogue.hpp"
2023-12-05 21:38:09 +00:00
namespace PCCompatible {
class MDA {
public:
MDA() : crtc_(Motorola::CRTC::Personality::HD6845S, outputter_) {}
static constexpr uint32_t BaseAddress = 0xb'0000;
static constexpr auto FontROM = ROM::Name::PCCompatibleMDAFont;
2023-12-05 21:38:09 +00:00
void set_source(const uint8_t *ram, std::vector<uint8_t> font) {
outputter_.ram = ram;
outputter_.font = font;
}
void run_for(Cycles cycles) {
// I _think_ the MDA's CRTC is clocked at 14/9ths the PIT clock.
// Do that conversion here.
full_clock_ += 14 * cycles.as<int>();
crtc_.run_for(Cycles(full_clock_ / 9));
full_clock_ %= 9;
}
template <int address>
void write(uint8_t value) {
if constexpr (address & 0x8) {
outputter_.set_control(value);
} else {
if constexpr (address & 0x1) {
crtc_.set_register(value);
} else {
crtc_.select_register(value);
}
}
}
template <int address>
uint8_t read() {
if constexpr (address & 0x8) {
return outputter_.control();
} else {
return crtc_.get_register();
}
}
// MARK: - Call-ins for ScanProducer.
void set_scan_target(Outputs::Display::ScanTarget *scan_target) {
outputter_.crt.set_scan_target(scan_target);
}
Outputs::Display::ScanStatus get_scaled_scan_status() const {
return outputter_.crt.get_scaled_scan_status() * 9.0f / 14.0f;
}
private:
struct CRTCOutputter {
CRTCOutputter() :
crt(882, 9, 382, 3, Outputs::Display::InputDataType::Red2Green2Blue2)
// TODO: really this should be a Luminance8 and set an appropriate modal tint colour;
// consider whether that's worth building into the scan target.
{
// crt.set_visible_area(Outputs::Display::Rect(0.1072f, 0.1f, 0.842105263157895f, 0.842105263157895f));
crt.set_display_type(Outputs::Display::DisplayType::RGB);
}
void set_control(uint8_t control) {
// b0: 'high resolution' (probably breaks if not 1)
// b3: video enable
// b5: enable blink
control_ = control;
}
uint8_t control() {
return control_;
}
void perform_bus_cycle_phase1(const Motorola::CRTC::BusState &state) {
// Determine new output state.
const OutputState new_state =
(state.hsync | state.vsync) ? OutputState::Sync :
((state.display_enable && control_&0x08) ? OutputState::Pixels : OutputState::Border);
// Upon either a state change or just having accumulated too much local time...
if(new_state != output_state || count > 882) {
// (1) flush preexisting state.
if(count) {
switch(output_state) {
case OutputState::Sync: crt.output_sync(count); break;
case OutputState::Border: crt.output_blank(count); break;
case OutputState::Pixels:
crt.output_data(count);
pixels = pixel_pointer = nullptr;
break;
}
}
// (2) adopt new state.
output_state = new_state;
count = 0;
}
// Collect pixels if applicable.
if(output_state == OutputState::Pixels) {
if(!pixels) {
pixel_pointer = pixels = crt.begin_data(DefaultAllocationSize);
// Flush any period where pixels weren't recorded due to back pressure.
if(pixels && count) {
crt.output_blank(count);
count = 0;
}
}
if(pixels) {
static constexpr uint8_t high_intensity = 0x0d;
static constexpr uint8_t low_intensity = 0x09;
static constexpr uint8_t off = 0x00;
if(state.cursor) {
pixel_pointer[0] = pixel_pointer[1] = pixel_pointer[2] = pixel_pointer[3] =
pixel_pointer[4] = pixel_pointer[5] = pixel_pointer[6] = pixel_pointer[7] =
pixel_pointer[8] = low_intensity;
} else {
const uint8_t attributes = ram[((state.refresh_address << 1) + 1) & 0xfff];
const uint8_t glyph = ram[((state.refresh_address << 1) + 0) & 0xfff];
uint8_t row = font[(glyph * 14) + state.row_address];
const uint8_t intensity = (attributes & 0x08) ? high_intensity : low_intensity;
uint8_t blank = off;
// Handle irregular attributes.
// Cf. http://www.seasip.info/VintagePC/mda.html#memmap
switch(attributes) {
case 0x00: case 0x08: case 0x80: case 0x88:
row = 0;
break;
case 0x70: case 0x78: case 0xf0: case 0xf8:
row ^= 0xff;
blank = intensity;
break;
}
// Apply blink if enabled.
if((control_ & 0x20) && (attributes & 0x80) && (state.field_count & 16)) {
row ^= 0xff;
blank = (blank == off) ? intensity : off;
}
if(((attributes & 7) == 1) && state.row_address == 13) {
// Draw as underline.
std::fill(pixel_pointer, pixel_pointer + 9, intensity);
} else {
// Draw according to ROM contents, possibly duplicating final column.
pixel_pointer[0] = (row & 0x80) ? intensity : off;
pixel_pointer[1] = (row & 0x40) ? intensity : off;
pixel_pointer[2] = (row & 0x20) ? intensity : off;
pixel_pointer[3] = (row & 0x10) ? intensity : off;
pixel_pointer[4] = (row & 0x08) ? intensity : off;
pixel_pointer[5] = (row & 0x04) ? intensity : off;
pixel_pointer[6] = (row & 0x02) ? intensity : off;
pixel_pointer[7] = (row & 0x01) ? intensity : off;
pixel_pointer[8] = (glyph >= 0xc0 && glyph < 0xe0) ? pixel_pointer[7] : blank;
}
}
pixel_pointer += 9;
}
}
// Advance.
count += 9;
// Output pixel row prematurely if storage is exhausted.
if(output_state == OutputState::Pixels && pixel_pointer == pixels + DefaultAllocationSize) {
crt.output_data(count);
count = 0;
pixels = pixel_pointer = nullptr;
}
}
void perform_bus_cycle_phase2(const Motorola::CRTC::BusState &) {}
Outputs::CRT::CRT crt;
enum class OutputState {
Sync, Pixels, Border
} output_state = OutputState::Sync;
int count = 0;
uint8_t *pixels = nullptr;
uint8_t *pixel_pointer = nullptr;
static constexpr size_t DefaultAllocationSize = 720;
const uint8_t *ram = nullptr;
std::vector<uint8_t> font;
uint8_t control_ = 0;
} outputter_;
Motorola::CRTC::CRTC6845<CRTCOutputter, Motorola::CRTC::CursorType::MDA> crtc_;
int full_clock_;
};
}
#endif /* MDA_h */