mirror of
https://github.com/TomHarte/CLK.git
synced 2024-12-25 18:30:21 +00:00
Attempts better to hide C1540 implementation details from the reader.
In this case not from the compiler, as it's desireable to keep `run_for` as a non-virtual call, and therefore everything else comes alone for the ride.
This commit is contained in:
Thomas Harte
parent
a49594c6a3
commit
6547102511
@ -9,124 +9,20 @@
|
||||
#ifndef Commodore1540_hpp
|
||||
#define Commodore1540_hpp
|
||||
|
||||
#include "../../../Processors/6502/6502.hpp"
|
||||
#include "../../../Components/6522/6522.hpp"
|
||||
|
||||
#include "../SerialBus.hpp"
|
||||
|
||||
#include "../../../Storage/Disk/Disk.hpp"
|
||||
#include "../../../Storage/Disk/DiskController.hpp"
|
||||
#include "Implementation/C1540Base.hpp"
|
||||
|
||||
namespace Commodore {
|
||||
namespace C1540 {
|
||||
|
||||
/*!
|
||||
An implementation of the serial-port VIA in a Commodore 1540 — the VIA that facilitates all
|
||||
IEC bus communications.
|
||||
|
||||
It is wired up such that Port B contains:
|
||||
Bit 0: data input; 1 if the line is low, 0 if it is high;
|
||||
Bit 1: data output; 1 if the line should be low, 0 if it should be high;
|
||||
Bit 2: clock input; 1 if the line is low, 0 if it is high;
|
||||
Bit 3: clock output; 1 if the line is low, 0 if it is high;
|
||||
Bit 4: attention acknowledge output; exclusive ORd with the attention input and ORd onto the data output;
|
||||
Bits 5/6: device select input; the 1540 will act as device 8 + [value of bits]
|
||||
Bit 7: attention input; 1 if the line is low, 0 if it is high
|
||||
|
||||
The attention input is also connected to CA1, similarly inverted — the CA1 wire will be high when the bus is low and vice versa.
|
||||
*/
|
||||
class SerialPortVIA: public MOS::MOS6522::IRQDelegatePortHandler {
|
||||
public:
|
||||
SerialPortVIA(MOS::MOS6522::MOS6522<SerialPortVIA> &via);
|
||||
|
||||
uint8_t get_port_input(MOS::MOS6522::Port);
|
||||
|
||||
void set_port_output(MOS::MOS6522::Port, uint8_t value, uint8_t mask);
|
||||
void set_serial_line_state(::Commodore::Serial::Line, bool);
|
||||
|
||||
void set_serial_port(const std::shared_ptr<::Commodore::Serial::Port> &);
|
||||
|
||||
private:
|
||||
MOS::MOS6522::MOS6522<SerialPortVIA> via_;
|
||||
uint8_t port_b_;
|
||||
std::weak_ptr<::Commodore::Serial::Port> serial_port_;
|
||||
bool attention_acknowledge_level_, attention_level_input_, data_level_output_;
|
||||
|
||||
void update_data_line();
|
||||
};
|
||||
|
||||
/*!
|
||||
An implementation of the drive VIA in a Commodore 1540 — the VIA that is used to interface with the disk.
|
||||
|
||||
It is wired up such that Port B contains:
|
||||
Bits 0/1: head step direction
|
||||
Bit 2: motor control
|
||||
Bit 3: LED control (TODO)
|
||||
Bit 4: write protect photocell status (TODO)
|
||||
Bits 5/6: read/write density
|
||||
Bit 7: 0 if sync marks are currently being detected, 1 otherwise.
|
||||
|
||||
... and Port A contains the byte most recently read from the disk or the byte next to write to the disk, depending on data direction.
|
||||
|
||||
It is implied that CA2 might be used to set processor overflow, CA1 a strobe for data input, and one of the CBs being definitive on
|
||||
whether the disk head is being told to read or write, but it's unclear and I've yet to investigate. So, TODO.
|
||||
*/
|
||||
class DriveVIA: public MOS::MOS6522::IRQDelegatePortHandler {
|
||||
public:
|
||||
class Delegate {
|
||||
public:
|
||||
virtual void drive_via_did_step_head(void *driveVIA, int direction) = 0;
|
||||
virtual void drive_via_did_set_data_density(void *driveVIA, int density) = 0;
|
||||
};
|
||||
void set_delegate(Delegate *);
|
||||
|
||||
DriveVIA();
|
||||
|
||||
uint8_t get_port_input(MOS::MOS6522::Port port);
|
||||
|
||||
void set_sync_detected(bool);
|
||||
void set_data_input(uint8_t);
|
||||
bool get_should_set_overflow();
|
||||
bool get_motor_enabled();
|
||||
|
||||
void set_control_line_output(MOS::MOS6522::Port, MOS::MOS6522::Line, bool value);
|
||||
|
||||
void set_port_output(MOS::MOS6522::Port, uint8_t value, uint8_t direction_mask);
|
||||
|
||||
private:
|
||||
uint8_t port_b_, port_a_;
|
||||
bool should_set_overflow_;
|
||||
bool drive_motor_;
|
||||
uint8_t previous_port_b_output_;
|
||||
Delegate *delegate_;
|
||||
};
|
||||
|
||||
/*!
|
||||
An implementation of the C1540's serial port; this connects incoming line levels to the serial-port VIA.
|
||||
*/
|
||||
class SerialPort : public ::Commodore::Serial::Port {
|
||||
public:
|
||||
void set_input(::Commodore::Serial::Line, ::Commodore::Serial::LineLevel);
|
||||
void set_serial_port_via(const std::shared_ptr<SerialPortVIA> &);
|
||||
|
||||
private:
|
||||
std::weak_ptr<SerialPortVIA> serial_port_VIA_;
|
||||
};
|
||||
|
||||
/*!
|
||||
Provides an emulation of the C1540.
|
||||
*/
|
||||
class Machine:
|
||||
public CPU::MOS6502::BusHandler,
|
||||
public MOS::MOS6522::IRQDelegatePortHandler::Delegate,
|
||||
public DriveVIA::Delegate,
|
||||
public Storage::Disk::Controller {
|
||||
|
||||
class Machine: public MachineBase {
|
||||
public:
|
||||
Machine();
|
||||
|
||||
/*!
|
||||
Sets the ROM image to use for this drive; it is assumed that the buffer provided will be at least 16 kb in size.
|
||||
Sets the ROM image to use for this drive; it is asserted that the buffer provided is 16 kb in size.
|
||||
*/
|
||||
void set_rom(const std::vector<uint8_t> &rom);
|
||||
|
||||
@ -135,35 +31,11 @@ class Machine:
|
||||
*/
|
||||
void set_serial_bus(std::shared_ptr<::Commodore::Serial::Bus> serial_bus);
|
||||
|
||||
/// Advances time.
|
||||
void run_for(const Cycles cycles);
|
||||
|
||||
/// Inserts @c disk into the drive.
|
||||
void set_disk(std::shared_ptr<Storage::Disk::Disk> disk);
|
||||
|
||||
// to satisfy CPU::MOS6502::Processor
|
||||
Cycles perform_bus_operation(CPU::MOS6502::BusOperation operation, uint16_t address, uint8_t *value);
|
||||
|
||||
// to satisfy MOS::MOS6522::Delegate
|
||||
virtual void mos6522_did_change_interrupt_status(void *mos6522);
|
||||
|
||||
// to satisfy DriveVIA::Delegate
|
||||
void drive_via_did_step_head(void *driveVIA, int direction);
|
||||
void drive_via_did_set_data_density(void *driveVIA, int density);
|
||||
|
||||
private:
|
||||
CPU::MOS6502::Processor<Machine, false> m6502_;
|
||||
|
||||
uint8_t ram_[0x800];
|
||||
uint8_t rom_[0x4000];
|
||||
|
||||
std::shared_ptr<SerialPortVIA> serial_port_VIA_port_handler_;
|
||||
std::shared_ptr<SerialPort> serial_port_;
|
||||
DriveVIA drive_VIA_port_handler_;
|
||||
|
||||
MOS::MOS6522::MOS6522<DriveVIA> drive_VIA_;
|
||||
MOS::MOS6522::MOS6522<SerialPortVIA> serial_port_VIA_;
|
||||
|
||||
int shift_register_, bit_window_offset_;
|
||||
virtual void process_input_bit(int value, unsigned int cycles_since_index_hole);
|
||||
virtual void process_index_hole();
|
||||
};
|
||||
|
||||
}
|
||||
|
||||
@ -7,12 +7,15 @@
|
||||
//
|
||||
|
||||
#include "C1540.hpp"
|
||||
|
||||
#include <string>
|
||||
#include "../../../Storage/Disk/Encodings/CommodoreGCR.hpp"
|
||||
#include <cassert>
|
||||
|
||||
#include "../../../../Storage/Disk/Encodings/CommodoreGCR.hpp"
|
||||
|
||||
using namespace Commodore::C1540;
|
||||
|
||||
Machine::Machine() :
|
||||
MachineBase::MachineBase() :
|
||||
m6502_(*this),
|
||||
shift_register_(0),
|
||||
Storage::Disk::Controller(1000000, 4, 300),
|
||||
@ -37,7 +40,7 @@ void Machine::set_serial_bus(std::shared_ptr<::Commodore::Serial::Bus> serial_bu
|
||||
Commodore::Serial::AttachPortAndBus(serial_port_, serial_bus);
|
||||
}
|
||||
|
||||
Cycles Machine::perform_bus_operation(CPU::MOS6502::BusOperation operation, uint16_t address, uint8_t *value) {
|
||||
Cycles MachineBase::perform_bus_operation(CPU::MOS6502::BusOperation operation, uint16_t address, uint8_t *value) {
|
||||
/*
|
||||
Memory map (given that I'm unsure yet on any potential mirroring):
|
||||
|
||||
@ -73,6 +76,7 @@ Cycles Machine::perform_bus_operation(CPU::MOS6502::BusOperation operation, uint
|
||||
}
|
||||
|
||||
void Machine::set_rom(const std::vector<uint8_t> &rom) {
|
||||
assert(rom.size() == sizeof(rom_));
|
||||
memcpy(rom_, rom.data(), std::min(sizeof(rom_), rom.size()));
|
||||
}
|
||||
|
||||
@ -84,21 +88,23 @@ void Machine::set_disk(std::shared_ptr<Storage::Disk::Disk> disk) {
|
||||
|
||||
void Machine::run_for(const Cycles cycles) {
|
||||
m6502_.run_for(cycles);
|
||||
set_motor_on(drive_VIA_port_handler_.get_motor_enabled());
|
||||
if(drive_VIA_port_handler_.get_motor_enabled()) // TODO: motor speed up/down
|
||||
|
||||
bool drive_motor = drive_VIA_port_handler_.get_motor_enabled();
|
||||
set_motor_on(drive_motor);
|
||||
if(drive_motor)
|
||||
Storage::Disk::Controller::run_for(cycles);
|
||||
}
|
||||
|
||||
#pragma mark - 6522 delegate
|
||||
|
||||
void Machine::mos6522_did_change_interrupt_status(void *mos6522) {
|
||||
void MachineBase::mos6522_did_change_interrupt_status(void *mos6522) {
|
||||
// both VIAs are connected to the IRQ line
|
||||
m6502_.set_irq_line(serial_port_VIA_.get_interrupt_line() || drive_VIA_.get_interrupt_line());
|
||||
}
|
||||
|
||||
#pragma mark - Disk drive
|
||||
|
||||
void Machine::process_input_bit(int value, unsigned int cycles_since_index_hole) {
|
||||
void MachineBase::process_input_bit(int value, unsigned int cycles_since_index_hole) {
|
||||
shift_register_ = (shift_register_ << 1) | value;
|
||||
if((shift_register_ & 0x3ff) == 0x3ff) {
|
||||
drive_VIA_port_handler_.set_sync_detected(true);
|
||||
@ -118,15 +124,15 @@ void Machine::process_input_bit(int value, unsigned int cycles_since_index_hole)
|
||||
}
|
||||
|
||||
// the 1540 does not recognise index holes
|
||||
void Machine::process_index_hole() {}
|
||||
void MachineBase::process_index_hole() {}
|
||||
|
||||
#pragma mak - Drive VIA delegate
|
||||
|
||||
void Machine::drive_via_did_step_head(void *driveVIA, int direction) {
|
||||
void MachineBase::drive_via_did_step_head(void *driveVIA, int direction) {
|
||||
step(direction);
|
||||
}
|
||||
|
||||
void Machine::drive_via_did_set_data_density(void *driveVIA, int density) {
|
||||
void MachineBase::drive_via_did_set_data_density(void *driveVIA, int density) {
|
||||
set_expected_bit_length(Storage::Encodings::CommodoreGCR::length_of_a_bit_in_time_zone((unsigned int)density));
|
||||
}
|
||||
|
||||
157
Machines/Commodore/1540/Implementation/C1540Base.hpp
Normal file
157
Machines/Commodore/1540/Implementation/C1540Base.hpp
Normal file
@ -0,0 +1,157 @@
|
||||
//
|
||||
// C1540Base.hpp
|
||||
// Clock Signal
|
||||
//
|
||||
// Created by Thomas Harte on 04/09/2017.
|
||||
// Copyright © 2017 Thomas Harte. All rights reserved.
|
||||
//
|
||||
|
||||
#ifndef C1540Base_hpp
|
||||
#define C1540Base_hpp
|
||||
|
||||
#include "../../../../Processors/6502/6502.hpp"
|
||||
#include "../../../../Components/6522/6522.hpp"
|
||||
|
||||
#include "../../SerialBus.hpp"
|
||||
|
||||
#include "../../../../Storage/Disk/Disk.hpp"
|
||||
|
||||
#include "../../../../Storage/Disk/DiskController.hpp"
|
||||
|
||||
namespace Commodore {
|
||||
namespace C1540 {
|
||||
|
||||
/*!
|
||||
An implementation of the serial-port VIA in a Commodore 1540 — the VIA that facilitates all
|
||||
IEC bus communications.
|
||||
|
||||
It is wired up such that Port B contains:
|
||||
Bit 0: data input; 1 if the line is low, 0 if it is high;
|
||||
Bit 1: data output; 1 if the line should be low, 0 if it should be high;
|
||||
Bit 2: clock input; 1 if the line is low, 0 if it is high;
|
||||
Bit 3: clock output; 1 if the line is low, 0 if it is high;
|
||||
Bit 4: attention acknowledge output; exclusive ORd with the attention input and ORd onto the data output;
|
||||
Bits 5/6: device select input; the 1540 will act as device 8 + [value of bits]
|
||||
Bit 7: attention input; 1 if the line is low, 0 if it is high
|
||||
|
||||
The attention input is also connected to CA1, similarly inverted — the CA1 wire will be high when the bus is low and vice versa.
|
||||
*/
|
||||
class SerialPortVIA: public MOS::MOS6522::IRQDelegatePortHandler {
|
||||
public:
|
||||
SerialPortVIA(MOS::MOS6522::MOS6522<SerialPortVIA> &via);
|
||||
|
||||
uint8_t get_port_input(MOS::MOS6522::Port);
|
||||
|
||||
void set_port_output(MOS::MOS6522::Port, uint8_t value, uint8_t mask);
|
||||
void set_serial_line_state(::Commodore::Serial::Line, bool);
|
||||
|
||||
void set_serial_port(const std::shared_ptr<::Commodore::Serial::Port> &);
|
||||
|
||||
private:
|
||||
MOS::MOS6522::MOS6522<SerialPortVIA> via_;
|
||||
uint8_t port_b_;
|
||||
std::weak_ptr<::Commodore::Serial::Port> serial_port_;
|
||||
bool attention_acknowledge_level_, attention_level_input_, data_level_output_;
|
||||
|
||||
void update_data_line();
|
||||
};
|
||||
|
||||
/*!
|
||||
An implementation of the drive VIA in a Commodore 1540 — the VIA that is used to interface with the disk.
|
||||
|
||||
It is wired up such that Port B contains:
|
||||
Bits 0/1: head step direction
|
||||
Bit 2: motor control
|
||||
Bit 3: LED control (TODO)
|
||||
Bit 4: write protect photocell status (TODO)
|
||||
Bits 5/6: read/write density
|
||||
Bit 7: 0 if sync marks are currently being detected, 1 otherwise.
|
||||
|
||||
... and Port A contains the byte most recently read from the disk or the byte next to write to the disk, depending on data direction.
|
||||
|
||||
It is implied that CA2 might be used to set processor overflow, CA1 a strobe for data input, and one of the CBs being definitive on
|
||||
whether the disk head is being told to read or write, but it's unclear and I've yet to investigate. So, TODO.
|
||||
*/
|
||||
class DriveVIA: public MOS::MOS6522::IRQDelegatePortHandler {
|
||||
public:
|
||||
class Delegate {
|
||||
public:
|
||||
virtual void drive_via_did_step_head(void *driveVIA, int direction) = 0;
|
||||
virtual void drive_via_did_set_data_density(void *driveVIA, int density) = 0;
|
||||
};
|
||||
void set_delegate(Delegate *);
|
||||
|
||||
DriveVIA();
|
||||
|
||||
uint8_t get_port_input(MOS::MOS6522::Port port);
|
||||
|
||||
void set_sync_detected(bool);
|
||||
void set_data_input(uint8_t);
|
||||
bool get_should_set_overflow();
|
||||
bool get_motor_enabled();
|
||||
|
||||
void set_control_line_output(MOS::MOS6522::Port, MOS::MOS6522::Line, bool value);
|
||||
|
||||
void set_port_output(MOS::MOS6522::Port, uint8_t value, uint8_t direction_mask);
|
||||
|
||||
private:
|
||||
uint8_t port_b_, port_a_;
|
||||
bool should_set_overflow_;
|
||||
bool drive_motor_;
|
||||
uint8_t previous_port_b_output_;
|
||||
Delegate *delegate_;
|
||||
};
|
||||
|
||||
/*!
|
||||
An implementation of the C1540's serial port; this connects incoming line levels to the serial-port VIA.
|
||||
*/
|
||||
class SerialPort : public ::Commodore::Serial::Port {
|
||||
public:
|
||||
void set_input(::Commodore::Serial::Line, ::Commodore::Serial::LineLevel);
|
||||
void set_serial_port_via(const std::shared_ptr<SerialPortVIA> &);
|
||||
|
||||
private:
|
||||
std::weak_ptr<SerialPortVIA> serial_port_VIA_;
|
||||
};
|
||||
|
||||
class MachineBase:
|
||||
public CPU::MOS6502::BusHandler,
|
||||
public MOS::MOS6522::IRQDelegatePortHandler::Delegate,
|
||||
public DriveVIA::Delegate,
|
||||
public Storage::Disk::Controller {
|
||||
|
||||
public:
|
||||
MachineBase();
|
||||
|
||||
// to satisfy CPU::MOS6502::Processor
|
||||
Cycles perform_bus_operation(CPU::MOS6502::BusOperation operation, uint16_t address, uint8_t *value);
|
||||
|
||||
// to satisfy MOS::MOS6522::Delegate
|
||||
virtual void mos6522_did_change_interrupt_status(void *mos6522);
|
||||
|
||||
// to satisfy DriveVIA::Delegate
|
||||
void drive_via_did_step_head(void *driveVIA, int direction);
|
||||
void drive_via_did_set_data_density(void *driveVIA, int density);
|
||||
|
||||
protected:
|
||||
CPU::MOS6502::Processor<MachineBase, false> m6502_;
|
||||
|
||||
uint8_t ram_[0x800];
|
||||
uint8_t rom_[0x4000];
|
||||
|
||||
std::shared_ptr<SerialPortVIA> serial_port_VIA_port_handler_;
|
||||
std::shared_ptr<SerialPort> serial_port_;
|
||||
DriveVIA drive_VIA_port_handler_;
|
||||
|
||||
MOS::MOS6522::MOS6522<DriveVIA> drive_VIA_;
|
||||
MOS::MOS6522::MOS6522<SerialPortVIA> serial_port_VIA_;
|
||||
|
||||
int shift_register_, bit_window_offset_;
|
||||
virtual void process_input_bit(int value, unsigned int cycles_since_index_hole);
|
||||
virtual void process_index_hole();
|
||||
};
|
||||
|
||||
}
|
||||
}
|
||||
|
||||
#endif /* C1540Base_hpp */
|
||||
@ -66,7 +66,6 @@
|
||||
4B4A76301DB1A3FA007AAE2E /* AY38910.cpp in Sources */ = {isa = PBXBuildFile; fileRef = 4B4A762E1DB1A3FA007AAE2E /* AY38910.cpp */; };
|
||||
4B4C83701D4F623200CD541F /* D64.cpp in Sources */ = {isa = PBXBuildFile; fileRef = 4B4C836E1D4F623200CD541F /* D64.cpp */; };
|
||||
4B4DC8211D2C2425003C5BF8 /* Vic20.cpp in Sources */ = {isa = PBXBuildFile; fileRef = 4B4DC81F1D2C2425003C5BF8 /* Vic20.cpp */; };
|
||||
4B4DC8281D2C2470003C5BF8 /* C1540.cpp in Sources */ = {isa = PBXBuildFile; fileRef = 4B4DC8261D2C2470003C5BF8 /* C1540.cpp */; };
|
||||
4B4DC82B1D2C27A4003C5BF8 /* SerialBus.cpp in Sources */ = {isa = PBXBuildFile; fileRef = 4B4DC8291D2C27A4003C5BF8 /* SerialBus.cpp */; };
|
||||
4B5073071DDD3B9400C48FBD /* ArrayBuilder.cpp in Sources */ = {isa = PBXBuildFile; fileRef = 4B5073051DDD3B9400C48FBD /* ArrayBuilder.cpp */; };
|
||||
4B50730A1DDFCFDF00C48FBD /* ArrayBuilderTests.mm in Sources */ = {isa = PBXBuildFile; fileRef = 4B5073091DDFCFDF00C48FBD /* ArrayBuilderTests.mm */; };
|
||||
@ -95,6 +94,7 @@
|
||||
4B8334861F5DA3780097E338 /* 6502Storage.cpp in Sources */ = {isa = PBXBuildFile; fileRef = 4B8334851F5DA3780097E338 /* 6502Storage.cpp */; };
|
||||
4B83348A1F5DB94B0097E338 /* IRQDelegatePortHandler.cpp in Sources */ = {isa = PBXBuildFile; fileRef = 4B8334891F5DB94B0097E338 /* IRQDelegatePortHandler.cpp */; };
|
||||
4B83348C1F5DB99C0097E338 /* 6522Base.cpp in Sources */ = {isa = PBXBuildFile; fileRef = 4B83348B1F5DB99C0097E338 /* 6522Base.cpp */; };
|
||||
4B8334951F5E25B60097E338 /* C1540.cpp in Sources */ = {isa = PBXBuildFile; fileRef = 4B8334941F5E25B60097E338 /* C1540.cpp */; };
|
||||
4B8378DC1F336631005CA9E4 /* CharacterMapper.cpp in Sources */ = {isa = PBXBuildFile; fileRef = 4B8378DA1F336631005CA9E4 /* CharacterMapper.cpp */; };
|
||||
4B8378DF1F33675F005CA9E4 /* CharacterMapper.cpp in Sources */ = {isa = PBXBuildFile; fileRef = 4B8378DD1F33675F005CA9E4 /* CharacterMapper.cpp */; };
|
||||
4B8378E21F336920005CA9E4 /* CharacterMapper.cpp in Sources */ = {isa = PBXBuildFile; fileRef = 4B8378E01F336920005CA9E4 /* CharacterMapper.cpp */; };
|
||||
@ -589,7 +589,6 @@
|
||||
4B4C836F1D4F623200CD541F /* D64.hpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.h; path = D64.hpp; sourceTree = "<group>"; };
|
||||
4B4DC81F1D2C2425003C5BF8 /* Vic20.cpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.cpp; path = Vic20.cpp; sourceTree = "<group>"; };
|
||||
4B4DC8201D2C2425003C5BF8 /* Vic20.hpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.h; path = Vic20.hpp; sourceTree = "<group>"; };
|
||||
4B4DC8261D2C2470003C5BF8 /* C1540.cpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.cpp; path = C1540.cpp; sourceTree = "<group>"; };
|
||||
4B4DC8271D2C2470003C5BF8 /* C1540.hpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.h; path = C1540.hpp; sourceTree = "<group>"; };
|
||||
4B4DC8291D2C27A4003C5BF8 /* SerialBus.cpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.cpp; path = SerialBus.cpp; sourceTree = "<group>"; };
|
||||
4B4DC82A1D2C27A4003C5BF8 /* SerialBus.hpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.h; path = SerialBus.hpp; sourceTree = "<group>"; };
|
||||
@ -637,6 +636,8 @@
|
||||
4B8334891F5DB94B0097E338 /* IRQDelegatePortHandler.cpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.cpp; name = IRQDelegatePortHandler.cpp; path = Implementation/IRQDelegatePortHandler.cpp; sourceTree = "<group>"; };
|
||||
4B83348B1F5DB99C0097E338 /* 6522Base.cpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.cpp; name = 6522Base.cpp; path = Implementation/6522Base.cpp; sourceTree = "<group>"; };
|
||||
4B83348E1F5DBA6E0097E338 /* 6522Storage.hpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.h; name = 6522Storage.hpp; path = Implementation/6522Storage.hpp; sourceTree = "<group>"; };
|
||||
4B8334911F5E24FF0097E338 /* C1540Base.hpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.h; name = C1540Base.hpp; path = Implementation/C1540Base.hpp; sourceTree = "<group>"; };
|
||||
4B8334941F5E25B60097E338 /* C1540.cpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.cpp; name = C1540.cpp; path = Implementation/C1540.cpp; sourceTree = "<group>"; };
|
||||
4B8378DA1F336631005CA9E4 /* CharacterMapper.cpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.cpp; name = CharacterMapper.cpp; path = Electron/CharacterMapper.cpp; sourceTree = "<group>"; };
|
||||
4B8378DB1F336631005CA9E4 /* CharacterMapper.hpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.h; name = CharacterMapper.hpp; path = Electron/CharacterMapper.hpp; sourceTree = "<group>"; };
|
||||
4B8378DD1F33675F005CA9E4 /* CharacterMapper.cpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.cpp; name = CharacterMapper.cpp; path = ZX8081/CharacterMapper.cpp; sourceTree = "<group>"; };
|
||||
@ -1429,8 +1430,8 @@
|
||||
4B4DC8251D2C2470003C5BF8 /* 1540 */ = {
|
||||
isa = PBXGroup;
|
||||
children = (
|
||||
4B4DC8261D2C2470003C5BF8 /* C1540.cpp */,
|
||||
4B4DC8271D2C2470003C5BF8 /* C1540.hpp */,
|
||||
4B8334931F5E25030097E338 /* Implementation */,
|
||||
);
|
||||
path = 1540;
|
||||
sourceTree = "<group>";
|
||||
@ -1585,6 +1586,15 @@
|
||||
name = Implementation;
|
||||
sourceTree = "<group>";
|
||||
};
|
||||
4B8334931F5E25030097E338 /* Implementation */ = {
|
||||
isa = PBXGroup;
|
||||
children = (
|
||||
4B8334941F5E25B60097E338 /* C1540.cpp */,
|
||||
4B8334911F5E24FF0097E338 /* C1540Base.hpp */,
|
||||
);
|
||||
name = Implementation;
|
||||
sourceTree = "<group>";
|
||||
};
|
||||
4B8805F11DCFC9A2003085B1 /* Parsers */ = {
|
||||
isa = PBXGroup;
|
||||
children = (
|
||||
@ -2802,6 +2812,7 @@
|
||||
4B8378E21F336920005CA9E4 /* CharacterMapper.cpp in Sources */,
|
||||
4BCF1FA41DADC3DD0039D2E7 /* Oric.cpp in Sources */,
|
||||
4BEA525E1DF33323007E74F2 /* Tape.cpp in Sources */,
|
||||
4B8334951F5E25B60097E338 /* C1540.cpp in Sources */,
|
||||
4B1497921EE4B5A800CE2596 /* ZX8081.cpp in Sources */,
|
||||
4B643F3F1D77B88000D431D6 /* DocumentController.swift in Sources */,
|
||||
4BA799951D8B656E0045123D /* StaticAnalyser.cpp in Sources */,
|
||||
@ -2850,7 +2861,6 @@
|
||||
4B6C73BD1D387AE500AFCFCA /* DiskController.cpp in Sources */,
|
||||
4B643F3A1D77AD1900D431D6 /* CSStaticAnalyser.mm in Sources */,
|
||||
4B1497881EE4A1DA00CE2596 /* ZX80O81P.cpp in Sources */,
|
||||
4B4DC8281D2C2470003C5BF8 /* C1540.cpp in Sources */,
|
||||
4B5A12571DD55862007A2231 /* Disassembler6502.cpp in Sources */,
|
||||
4BE7C9181E3D397100A5496D /* TIA.cpp in Sources */,
|
||||
4B1E85751D170228001EF87D /* Typer.cpp in Sources */,
|
||||
|
||||
Loading…
Reference in New Issue
Block a user