6502/CLK
1
0
Fork 0
mirror of https://github.com/TomHarte/CLK.git synced 2024-06-30 22:29:56 +00:00
Code Issues Projects Releases Wiki Activity

Reduces output noise.

Browse Source
This commit is contained in:
Thomas Harte 2019-09-18 21:41:29 -04:00
parent f53411a319
commit 8d4a96683a
4 changed files with 21 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
Components/5380/ncr5380.cpp
View File

@ -23,7 +23,7 @@ NCR5380::NCR5380(SCSI::Bus &bus, int clock_rate) :
void NCR5380::write(int address, uint8_t value, bool dma_acknowledge) {
switch(address & 7) {
case 0:
LOG("[SCSI 0] Set current SCSI bus state to " << PADHEX(2) << int(value));
// LOG("[SCSI 0] Set current SCSI bus state to " << PADHEX(2) << int(value));
data_bus_ = value;
if(dma_request_ && dma_operation_ == DMAOperation::Send) {
@ -36,7 +36,7 @@ void NCR5380::write(int address, uint8_t value, bool dma_acknowledge) {
break;
case 1: {
LOG("[SCSI 1] Initiator command register set: " << PADHEX(2) << int(value));
// LOG("[SCSI 1] Initiator command register set: " << PADHEX(2) << int(value));
initiator_command_ = value;
bus_output_ &= ~(Line::Reset | Line::Acknowledge | Line::Busy | Line::SelectTarget | Line::Attention);
@ -52,7 +52,7 @@ void NCR5380::write(int address, uint8_t value, bool dma_acknowledge) {
} break;
case 2:
LOG("[SCSI 2] Set mode: " << PADHEX(2) << int(value));
// LOG("[SCSI 2] Set mode: " << PADHEX(2) << int(value));
mode_ = value;
// bit 7: 1 = use block mode DMA mode (if DMA mode is also enabled)
@ -87,27 +87,27 @@ void NCR5380::write(int address, uint8_t value, bool dma_acknowledge) {
break;
case 3: {
LOG("[SCSI 3] Set target command: " << PADHEX(2) << int(value));
// LOG("[SCSI 3] Set target command: " << PADHEX(2) << int(value));
target_command_ = value;
update_control_output();
} break;
case 4:
LOG("[SCSI 4] Set select enabled: " << PADHEX(2) << int(value));
// LOG("[SCSI 4] Set select enabled: " << PADHEX(2) << int(value));
break;
case 5:
LOG("[SCSI 5] Start DMA send: " << PADHEX(2) << int(value));
// LOG("[SCSI 5] Start DMA send: " << PADHEX(2) << int(value));
dma_operation_ = DMAOperation::Send;
break;
case 6:
LOG("[SCSI 6] Start DMA target receive: " << PADHEX(2) << int(value));
// LOG("[SCSI 6] Start DMA target receive: " << PADHEX(2) << int(value));
dma_operation_ = DMAOperation::TargetReceive;
break;
case 7:
LOG("[SCSI 7] Start DMA initiator receive: " << PADHEX(2) << int(value));
// LOG("[SCSI 7] Start DMA initiator receive: " << PADHEX(2) << int(value));
dma_operation_ = DMAOperation::InitiatorReceive;
break;
}
@ -131,7 +131,7 @@ void NCR5380::write(int address, uint8_t value, bool dma_acknowledge) {
uint8_t NCR5380::read(int address, bool dma_acknowledge) {
switch(address & 7) {
case 0:
LOG("[SCSI 0] Get current SCSI bus state: " << PADHEX(2) << (bus_.get_state() & 0xff));
// LOG("[SCSI 0] Get current SCSI bus state: " << PADHEX(2) << (bus_.get_state() & 0xff));
if(dma_request_ && dma_operation_ == DMAOperation::InitiatorReceive) {
dma_acknowledge_ = true;
@ -142,7 +142,7 @@ uint8_t NCR5380::read(int address, bool dma_acknowledge) {
return uint8_t(bus_.get_state());
case 1:
LOG("[SCSI 1] Initiator command register get: " << (arbitration_in_progress_ ? 'p' : '-') << (lost_arbitration_ ? 'l' : '-'));
// LOG("[SCSI 1] Initiator command register get: " << (arbitration_in_progress_ ? 'p' : '-') << (lost_arbitration_ ? 'l' : '-'));
return
// Bits repeated as they were set.
(initiator_command_ & ~0x60) |
@ -154,11 +154,11 @@ uint8_t NCR5380::read(int address, bool dma_acknowledge) {
(lost_arbitration_ ? 0x20 : 0x00);
case 2:
LOG("[SCSI 2] Get mode");
// LOG("[SCSI 2] Get mode");
return mode_;
case 3:
LOG("[SCSI 3] Get target command");
// LOG("[SCSI 3] Get target command");
return target_command_;
case 4: {
@ -172,7 +172,7 @@ uint8_t NCR5380::read(int address, bool dma_acknowledge) {
((bus_state & Line::Input) ? 0x04 : 0x00) |
((bus_state & Line::SelectTarget) ? 0x02 : 0x00) |
((bus_state & Line::Parity) ? 0x01 : 0x00);
LOG("[SCSI 4] Get current bus state: " << PADHEX(2) << int(result));
// LOG("[SCSI 4] Get current bus state: " << PADHEX(2) << int(result));
return result;
}
@ -191,16 +191,16 @@ uint8_t NCR5380::read(int address, bool dma_acknowledge) {
/* b2 = busy error */
((bus_state & Line::Attention) ? 0x02 : 0x00) |
((bus_state & Line::Acknowledge) ? 0x01 : 0x00);
LOG("[SCSI 5] Get bus and status: " << PADHEX(2) << int(result));
// LOG("[SCSI 5] Get bus and status: " << PADHEX(2) << int(result));
return result;
}
case 6:
LOG("[SCSI 6] Get input data");
// LOG("[SCSI 6] Get input data");
return 0xff;
case 7:
LOG("[SCSI 7] Reset parity/interrupt");
// LOG("[SCSI 7] Reset parity/interrupt");
return 0xff;
}
return 0;

4
Storage/MassStorage/SCSI/DirectAccessDevice.cpp
View File

@ -7,10 +7,10 @@
//
#include "DirectAccessDevice.hpp"
#include "../../../Outputs/Log.hpp"
using namespace SCSI;
void DirectAccessDevice::set_storage(const std::shared_ptr<Storage::MassStorage::MassStorageDevice> &device) {
device_ = device;
}
@ -19,7 +19,7 @@ bool DirectAccessDevice::read(const Target::CommandState &state, Target::Respond
if(!device_) return false;
const auto specs = state.read_write_specs();
printf("Read: %d from %d\n", specs.number_of_blocks, specs.address);
LOG("Read: " << specs.number_of_blocks << " from " << specs.address);
std::vector<uint8_t> output = device_->get_block(specs.address);
for(uint32_t offset = 1; offset < specs.number_of_blocks; ++offset) {

1
Storage/MassStorage/SCSI/Target.hpp
View File

@ -10,6 +10,7 @@
#define SCSI_Target_hpp
#include "SCSI.hpp"
#include "../../../Outputs/Log.hpp"
#include <cstring>
#include <functional>

5
Storage/MassStorage/SCSI/TargetImplementation.hpp
View File

@ -125,7 +125,6 @@ template <typename Executor> void Target<Executor>::scsi_bus_did_change(Bus *, B
bus_state_ &= ~(Line::Request | 0xff);
++data_pointer_;
// printf("DP: %zu\n", data_pointer_);
break;
case 0:
@ -177,7 +176,7 @@ template <typename Executor> bool Target<Executor>::dispatch_command() {
#define G1(x) (0x20|x)
#define G5(x) (0xa0|x)
printf("---Command %02x---\n", command_[0]);
LOG("---Command " << PADHEX(2) << int(command_[0]) << "---");
switch(command_[0]) {
default: return false;
@ -277,5 +276,5 @@ template <typename Executor> void Target<Executor>::end_command() {
bus_state_ = DefaultBusState;
set_device_output(bus_state_);
printf("---Done---\n");
LOG("---Done---");
}