diff --git a/Machines/Apple/Macintosh/Keyboard.hpp b/Machines/Apple/Macintosh/Keyboard.hpp
index ff7e0708c..955c7fe4a 100644
--- a/Machines/Apple/Macintosh/Keyboard.hpp
+++ b/Machines/Apple/Macintosh/Keyboard.hpp
@@ -15,36 +15,153 @@ namespace Macintosh {
 class Keyboard {
 	public:
 		void set_input(bool data) {
+			switch(mode_) {
+				case Mode::Waiting:
+					/*
+						"Only the computer can initiate communication over the keyboard lines. When the computer and keyboard
+						are turned on, the computer is in charge of the keyboard interface and the keyboard is passive. The
+						computer signals that it is ready to begin communication by pulling the Keyboard Data line low."
+					*/
+					if(!data) {
+						mode_ = Mode::AcceptingCommand;
+						phase_ = 0;
+						command_ = 0;
+					}
+				break;
+
+				case Mode::AcceptingCommand:
+					/* Note value, so that it can be latched upon a clock transition. */
+					data_input_ = data;
+				break;
+
+				case Mode::AwaitingEndOfCommand:
+					/*
+						The last bit of the command leaves the Keyboard Data line low; the computer then indicates that it is ready
+						to receive the keyboard's response by setting the Keyboard Data line high.
+					*/
+					if(data) {
+						mode_ = Mode::PerformingCommand;
+						phase_ = 0;
+					}
+				break;
+
+				default:
+				case Mode::SendingResponse:
+					/* This line isn't currently an input; do nothing. */
+				break;
+			}
 		}
 
 		bool get_clock() {
-			return false;
+			return clock_output_;
 		}
 
 		bool get_data() {
-			return false;
+			return !!(response_ & 0x80);
 		}
 
 		/*!
 			The keyboard expects ~10 µs-frequency ticks, i.e. a clock rate of just around 100 kHz.
 		*/
 		void run_for(HalfCycles cycle) {
-			// TODO: something.
+			switch(mode_) {
+				default:
+				case Mode::AwaitingEndOfCommand:
+				case Mode::Waiting: return;
+
+				case Mode::AcceptingCommand: {
+					/*
+						"When the computer is sending data to the keyboard, the keyboard transmits eight cycles of 400 µS each (180 µS low,
+						220 µS high) on the Keyboard Clock line. On the falling edge of each keyboard clock cycle, the Macintosh Plus places
+						a data bit on the data line and holds it there for 400 µS. The keyboard reads the data bit 80 µS after the rising edge
+						of the Keyboard Clock signal."
+					*/
+					const auto offset = phase_ % 40;
+					clock_output_ = offset >= 18;
+
+					if(offset == 26) {
+						command_ = (command_ << 1) | (data_input_ ? 1 : 0);
+					}
+
+					++phase_;
+					if(phase_ == 8*40) {
+						mode_ = Mode::AwaitingEndOfCommand;
+						phase_ = 0;
+					}
+				} break;
+
+				case Mode::PerformingCommand: {
+					response_ = perform_command(command_);
+
+					// Inquiry has a 0.25-second timeout; everything else is instant.
+					++phase_;
+					if(phase_ == 25000 || command_ != 0x10 || response_ != 0x7b) {
+						mode_ = Mode::SendingResponse;
+						phase_ = 0;
+					}
+				} break;
+
+				case Mode::SendingResponse: {
+					/*
+						"When sending data to the computer, the keyboard transmits eight cycles of 330 µS each (160 µS low, 170 µS high)
+						on the normally high Keyboard Clock line. It places a data bit on the data line 40 µS before the falling edge of each
+						clock cycle and maintains it for 330 µS. The VIA in the computer latches the data bit into its shift register on the
+						rising edge of the Keyboard Clock signal."
+					*/
+					const auto offset = phase_ % 33;
+					clock_output_ = offset >= 16;
+
+					if(offset == 29) {
+						response_ <<= 1;
+					}
+
+					++phase_;
+					if(phase_ == 8*33) {
+						mode_ = Mode::Waiting;
+						phase_ = 0;
+					}
+				} break;
+			}
 		}
+
+	private:
+
+		int perform_command(int command) {
+			switch(command) {
+				case 0x10:	// Inquiry.
+				break;
+
+				case 0x14:	// Instant.
+				break;
+
+				case 0x16:	// Model number.
+				return
+					0x01 |			// b0: always 1
+					(1 << 1) |		// keyboard model number
+					(1 << 4);		// next device number
+									// (b7 not set => no next device)
+
+				case 0x36:	// Test
+				return 0x7d;		// 0x7d = ACK, 0x77 = not ACK.
+			}
+			return 0x7b;	// No key transition.
+		}
+
+		enum class Mode {
+			Waiting,
+			AcceptingCommand,
+			AwaitingEndOfCommand,
+			SendingResponse,
+			PerformingCommand
+		} mode_ = Mode::Waiting;
+		int phase_ = 0;
+		int command_ = 0;
+		int response_ = 0;
+
+		bool data_input_ = false;
+		bool clock_output_ = false;
 };
 
-/*
-	"When sending data to the computer, the keyboard transmits eight cycles of 330 µS each (160 µS low, 170 µS high)
-	on the normally high Keyboard Clock line. It places a data bit on the data line 40 µS before the falling edge of each
-	clock cycle and maintains it for 330 µS. The VIA in the compu(er latches the data bit into its Shift register on the
-	rising edge of the Keyboard Clock signal."
-
-	"When the computer is sending data to the keyboard, the keyboard transmits eight cycles of 400 µS each (180 µS low,
-	220 µS high) on the Keyboard Clock line. On the falling edge of each keyboard clock cycle, the Macintosh Plus places
-	a data bit on the data line and holds it there for 400 µS. The keyboard reads the data bit 80 µS after the rising edge
-	of the Keyboard Clock signal."
-*/
-
 }
 }