Thomas Harte
ccfe1b13cb
Imports DIVS, MULS and MOVE from SR tests.
...
Not all passing.
2019-06-21 16:03:11 -04:00
Thomas Harte
0c1c10bc66
Introduces a test that proves that DIVS' attempt to set proper timing isn't working.
2019-06-20 19:29:02 -04:00
Thomas Harte
fafd1801fe
Introduces first DIVS test, and associated fixes.
2019-06-20 19:02:03 -04:00
Thomas Harte
79d8d27b4c
Reintroduces use of locations_by_bus_step_ to decrease 68000 construction time.
2019-06-20 15:10:11 -04:00
Thomas Harte
440f52c943
Incorporates TRAP test.
2019-06-19 21:18:30 -04:00
Thomas Harte
91ced056d2
Adds tests for ADD. No failures.
2019-06-19 18:56:21 -04:00
Thomas Harte
8dace34e63
Imports third-party tests for ABCD, and thereby fixes ABCD.
2019-06-19 18:13:06 -04:00
Thomas Harte
8182b0363f
Adds enum to help with status decoding.
2019-06-19 17:01:49 -04:00
Thomas Harte
c5b036fedf
Ensures aborted decodes don't overwrite prior correct ones.
2019-06-19 17:00:44 -04:00
Thomas Harte
e26ddd0ed5
Corrects address fetches for CMPI.l #, (xxx).w.
2019-06-19 13:52:56 -04:00
Thomas Harte
ca83431e54
Fixed: Scc is a byte operation.
...
It was, until now, post-incrementing and pre-decrementing registers other than A7 incorrectly.
2019-06-19 13:15:12 -04:00
Thomas Harte
00c32e4b59
Further miscellaneous changes to debug logging. All temporary.
2019-06-18 10:34:31 -04:00
Thomas Harte
877b46d2c1
Advances IWM/drive emulation very close to the point of 'Welcome to Macintosh'.
2019-06-15 16:08:54 -04:00
Thomas Harte
bde975a3b9
Possibly mights the tiniest bit of headway with 'the IWM'.
...
I'm now pretty sure that my 3.5" drive, which for now is implemented in the IWM (yuck) is just responding to queries incorrectly.
2019-06-13 22:38:09 -04:00
Thomas Harte
f6f9024631
Corrects Macintosh aspect ratio (and framing).
2019-06-13 18:41:38 -04:00
Thomas Harte
59a94943aa
Resolves final set of build warnings.
2019-06-13 10:55:29 -04:00
Thomas Harte
bf4889f238
Reduces warnings to 6.
2019-06-13 10:43:00 -04:00
Thomas Harte
7cc5afd798
Eliminates another couple of implicit type conversion warnings.
2019-06-13 10:30:26 -04:00
Thomas Harte
11ab021672
Further reduces implicit conversion warnings, to 17.
2019-06-13 10:27:49 -04:00
Thomas Harte
feafd4bdae
Eliminates further type conversion warnings.
2019-06-13 10:20:17 -04:00
Thomas Harte
d6150645c0
By hook or by crook, mouse input now works.
2019-06-12 22:19:25 -04:00
Thomas Harte
ec5701459c
Makes various temporary logging changes.
2019-06-11 19:54:07 -04:00
Thomas Harte
697e094a4e
Sketches out the absolute basics of an SCC interface.
2019-06-08 18:47:11 -04:00
Thomas Harte
e9d0676e75
Fiddles further with the tachometer.
2019-06-06 21:36:19 -04:00
Thomas Harte
7591906777
Numerous IWM fixes: the machine now seems to be trying to measure the tachometer.
2019-06-06 18:32:11 -04:00
Thomas Harte
058fe3e986
Fixes some other low-hanging warning fruit.
2019-06-04 16:47:10 -04:00
Thomas Harte
51ee83a427
Resolves a further 11 conversion errors.
2019-06-04 16:34:45 -04:00
Thomas Harte
5b21da7874
Reduces number of warnings to 70.
2019-06-04 16:27:09 -04:00
Thomas Harte
bd7f00bd9c
Resolves a further handful of implicit type conversion warnings.
2019-06-04 15:43:44 -04:00
Thomas Harte
4d4ddded6d
Fixes register-relative JMP and JSR.
2019-06-03 15:29:50 -04:00
Thomas Harte
881feb1bd3
Adds preliminary parsing of the Disk Copy 4.2 format.
2019-06-02 13:39:25 -04:00
Thomas Harte
035f07877c
Reduces conversions to vector.
2019-05-30 12:08:35 -04:00
Thomas Harte
b3d2b4cd37
Fixes the interrupt return address.
2019-05-29 20:27:46 -04:00
Thomas Harte
c86fe9ada9
Ensures replace_write_values
works in release builds.
2019-05-29 19:00:53 -04:00
Thomas Harte
ecf93b7822
Eliminates some type conversion warnings.
2019-05-29 14:56:50 -04:00
Thomas Harte
541b75ee6e
Further fixes PEA, and OR/AND/EOR Dn, (An).
2019-05-29 14:37:15 -04:00
Thomas Harte
77b08febdb
Corrects PEA and adds an additional debugging aid.
2019-05-29 12:47:17 -04:00
Thomas Harte
fcda376f33
Removes three further type conversion warnings.
2019-05-28 21:56:49 -04:00
Thomas Harte
0848fc7e03
Ensures the Mac uses auto vectored interrupts.
2019-05-28 16:24:41 -04:00
Thomas Harte
3bb8d6717f
Ensures A7 is correct at end of an UNLINK.
2019-05-28 16:02:42 -04:00
Thomas Harte
5e2496d59c
Simplifies and corrects MOVE logic.
2019-05-28 15:17:03 -04:00
Thomas Harte
c52da9d802
Adds some logging preparatory to a MOVE change.
2019-05-28 15:05:42 -04:00
Thomas Harte
0b999ce0e4
Attempts to fix register-relative JSRs.
2019-05-09 06:43:07 -04:00
Thomas Harte
b04bd7069d
Corrects Scc and DBcc (xxx).l and (xxx).w.
2019-05-09 06:28:55 -04:00
Thomas Harte
249b0fbb32
Corrects PC on stack after an illegal instruction.
...
Also fixed LOG_TRACE functionality.
2019-05-08 22:36:25 -04:00
Thomas Harte
d8ed8b66f3
Improves carry/extend for ROXL and ROXR.
2019-05-06 21:14:16 -04:00
Thomas Harte
e6ed50383c
Corrects PEA and MOVE.l (An)[+], (xxx).L; also adds an extra test that caught the latter.
2019-05-05 22:47:54 -04:00
Thomas Harte
417a3e1540
Adds missing call to flush.
2019-05-03 23:31:12 -04:00
Thomas Harte
fa8c804d47
Makes explicit a few implicit type conversions.
...
There's plenty more down this well, alas.
2019-05-03 23:26:03 -04:00
Thomas Harte
2c9a1f7b16
Restores vector.
2019-05-03 14:50:07 -04:00
Thomas Harte
0ea4c1ac80
Evicts #includes from my namespace.
2019-05-03 14:48:39 -04:00
Thomas Harte
a873ec97eb
Also previously missing: vector.h.
2019-05-03 14:43:31 -04:00
Thomas Harte
cc8a65780e
Adds further missing includes.
2019-05-03 14:42:36 -04:00
Thomas Harte
c117deb43b
Introduces a couple of missing #includes.
2019-05-03 14:37:05 -04:00
Thomas Harte
a0eb20ff1f
Tweaks divide-by-zero timing.
2019-05-03 14:29:36 -04:00
Thomas Harte
34fe9981e4
Added necessary mea culpas.
2019-05-03 14:25:25 -04:00
Thomas Harte
291e91375f
Takes a shot at the synchronous bus.
2019-05-03 14:20:59 -04:00
Thomas Harte
857f74b320
Fixed: the accepted interrupt level now appears on the bus.
2019-05-02 15:47:12 -04:00
Thomas Harte
1d9608efc7
Alters the order of interrupt bus activity, to bring it into line with a real 68000.
2019-05-02 15:25:43 -04:00
Thomas Harte
93616a4903
Completes test of a vectored interrupt.
...
Correcting issues uncovered.
2019-05-02 00:00:09 -04:00
Thomas Harte
bb07206c55
Corrects internet response to work as currently implemented.
...
Also makes corrections to the bus error and address error exceptions.
2019-05-01 21:59:06 -04:00
Thomas Harte
2e5c0811e7
Makes some effort at getting into interrupt processing.
2019-05-01 15:26:36 -04:00
Thomas Harte
f6ac407e4d
Takes further steps towards supporting interrupts.
...
Specifically:
* introduces the necessary bus signalling; and
* adds corresponding functional steps.
Still to figure out: getting into and out of an interrupt cycle.
2019-05-01 15:19:24 -04:00
Thomas Harte
078c3135df
The 5/3 split of microcycles appears not accurately to model when lines are tested.
...
Therefore I've reverted to a more normative 4:4 form.
2019-04-30 22:09:13 -04:00
Thomas Harte
92568c90c8
Adds support for HALT as an input, and puts some effort into how to calculate E.
2019-04-30 22:07:48 -04:00
Thomas Harte
f1879c5fbc
Corrects interrupt level test within STOP.
2019-04-30 19:32:35 -04:00
Thomas Harte
31bb770fdd
Implement STOPpages, waits for DTack, and bus and address error exceptions.
2019-04-30 19:24:22 -04:00
Thomas Harte
e430f2658f
Adds a test and by that means fixes divide-by-zero exception return addresses.
2019-04-29 23:09:50 -04:00
Thomas Harte
3060175ff5
Eliminates constructions of std::tuple for performance reasons.
...
Specifically: reduces 68000 construction time from 10+ seconds to more like 2.8.
2019-04-29 22:43:15 -04:00
Thomas Harte
eb4233e2fd
Joins some commonalities, shaving about 150 lines of code.
2019-04-29 22:37:23 -04:00
Thomas Harte
6b4c656849
Reverses order of instruction instantiation, reducing total bus step heft by about 11%.
...
... since that means inserting more complicated instructions before simpler ones in general, making subset finds more likely.
2019-04-29 22:20:18 -04:00
Thomas Harte
1b8fada6aa
Restores accidentally-cropped functionality.
2019-04-29 22:10:00 -04:00
Thomas Harte
977f9ee831
Takes a run at divide-by-zero exceptions and starts looking towards ways to improve startup time.
2019-04-29 22:08:16 -04:00
Thomas Harte
16fb3b49a5
It leads to a TODO, but implemented decoding and initial setup of STOPpages.
2019-04-29 19:30:00 -04:00
Thomas Harte
3da1b3bf9b
Introduces storage for various bus inputs.
2019-04-29 19:22:05 -04:00
Thomas Harte
bc00856c05
Removed TODO; it appears this is just the standard stack frame.
2019-04-29 19:09:20 -04:00
Thomas Harte
52e3dece81
Improves exposition.
2019-04-29 19:07:14 -04:00
Thomas Harte
2c1d8fa18a
Adds a check for instruction privilege violation, albeit that I think I need different bus steps.
2019-04-29 19:06:10 -04:00
Thomas Harte
3e34ae67f6
Implements support for the trace flag.
2019-04-29 19:02:59 -04:00
Thomas Harte
ceebecec8d
Corrects zero and negative flags for EXT.w.
2019-04-29 17:54:33 -04:00
Thomas Harte
05d1eda422
Fixes crossed-over decoding of EORI and ORI.
2019-04-29 17:45:52 -04:00
Thomas Harte
31f318ad43
Fixes MOVE.bw #, (xxx).w.
2019-04-29 17:41:46 -04:00
Thomas Harte
270f46e147
Normalises CMPl.
2019-04-29 17:27:56 -04:00
Thomas Harte
8564945713
Corrects vector nomination for unrecognised opcodes.
2019-04-29 17:10:33 -04:00
Thomas Harte
7bd7f3fb73
Sign-extends (xxx).w addresses.
2019-04-29 16:55:43 -04:00
Thomas Harte
c466b6f9e7
Factors out the [unit testing] stuff of being a trace-checking 68000 bus handler.
2019-04-29 16:11:01 -04:00
Thomas Harte
d9071ee9f1
Starts sketching out the asynchronous bus.
2019-04-29 13:45:53 -04:00
Thomas Harte
97e118abfa
Corrects accidental exclusion of MOVE.bw (xxx).w, [(xxx).w/(xxx).l].
2019-04-28 23:25:46 -04:00
Thomas Harte
412f091d76
Implements a missing form of BTST.
2019-04-28 23:20:50 -04:00
Thomas Harte
ca1f669e64
Implements MOVEP.
...
371 is now the alleged number of missing opcodes. But I'd dare imagine it's more like three or four.
2019-04-28 22:52:54 -04:00
Thomas Harte
0298b1b3b7
Implements LINK and UNLINK.
...
Also starts excluding opcodes that I can't determine the mapping of from the list of those tested against.
Due to those two things together, the latter incomplete: 627 opcodes outstanding. But only STOP and MOVEP remain on my list of things to implement prior to exceptions.
2019-04-28 17:12:31 -04:00
Thomas Harte
4b1324de77
Takes a run at TRAPV.
...
... to leave 1466 as the unimplemented count.
2019-04-28 15:52:58 -04:00
Thomas Harte
8e8dce9bec
Attempts an implementation of CHK.
...
1467 is now the official count of things to implement, though I'm starting to get suspicious.
2019-04-28 15:47:21 -04:00
Thomas Harte
f4350522bf
Implements NBCD.
...
Now outstanding: 1891.
2019-04-27 21:29:50 -04:00
Thomas Harte
e2abb66a11
Adds missing addressing modes for ADDA and SUBA.
...
... reducing missing opcodes to 1941.
2019-04-27 17:22:26 -04:00
Thomas Harte
ab5fcab9bf
Attempts an implementation of ADDX and SUBX.
...
Leaving 2005 non-[A/F]-line instructions.
2019-04-27 16:57:47 -04:00
Thomas Harte
e75b386f7d
Attempts DIVU and DIVS.
...
Reportedly leaving 10965 operations now unimplemented.
2019-04-26 22:22:35 -04:00
Thomas Harte
796203859f
Implements PEA.
...
This decreases the unimplemented count by 28 from 11841 to 11813.
2019-04-26 13:49:59 -04:00
Thomas Harte
40b2fe7339
Merge branch 'master' into 68000
2019-04-26 00:02:35 -04:00
Thomas Harte
a3b6d2d16e
Corrects test and resolves all instances of opcodes that are valid but shouldn't be.
...
The converse case will require implementation of the remaining instructions.
2019-04-25 22:54:58 -04:00