1363 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
Thomas Harte	b70fdc2de8	Switched to being explicitly careful about not wrapping around and stomping on data not yet output.	2016-01-18 13:56:20 -06:00
Thomas Harte	ddcc34740b	Added lots of debugging output while I attempt to locate the source of audio scratchiness, also simplified manner of dealing with wraparound within the AudioQueue wrapper.	2016-01-18 13:50:19 -06:00
Thomas Harte	b58e59e2bb	Fixed: now outputting the requested output rate, rather than massively overproducing at the input rate.	2016-01-14 23:12:40 -05:00
Thomas Harte	e63b6d22ae	As shown by the commented-out code, the aliasing-adaptation seems to be working. So something is wrong somewhere else.	2016-01-14 21:59:37 -05:00
Thomas Harte	383b2be4c6	Fixed one off-by-one error.	2016-01-14 21:33:27 -05:00
Thomas Harte	8bd04a6be4	Switched model for filter subclasses. Implemented test square[-ish] wave to check for obvious stream errors. None is clear.	2016-01-14 21:27:02 -05:00
Thomas Harte	781249acf7	Fixed crash.	2016-01-14 20:35:36 -05:00
Thomas Harte	38ffcaa262	Here, at last, is _some_ audio output, at least.	2016-01-14 20:33:22 -05:00
Thomas Harte	afde8dac49	Closed the loop such that audio manages to bubble up into Objective-C.	2016-01-13 22:38:59 -05:00
Thomas Harte	439d452e23	Resolved some errors.	2016-01-13 22:11:33 -05:00
Thomas Harte	49e89a4bcb	I'm not yet completely convinced by my approach to time basing, but it'll probably do? If so then this more or less gets me ready for a point-sampled filtering.	2016-01-13 22:02:39 -05:00
Thomas Harte	d9a7ef9e46	Edging towards audio output; the speaker is given appropriate input and output rates, and then updated with current divider and enabled/disabled status.	2016-01-13 21:03:43 -05:00
Thomas Harte	d28abdc037	Made an attempt at correct timing, adding support for additional paged ROMs, added file association for .rom.	2016-01-12 22:34:26 -05:00
Thomas Harte	84ba4e2900	Tidied a little, started working towards supporting speaker output.	2016-01-12 22:19:56 -05:00
Thomas Harte	3437781abd	Started sketching out an interface for sound generation. Which made me realise that the CRT in CRTDelegate was redundant, since C++ has namespaces.	2016-01-12 16:54:09 -05:00
Thomas Harte	6112f4ef6b	Withdrew soft filtering for now; until the sampling frequency is passed on it's not sufficiently rigorous.	2016-01-12 16:42:16 -05:00
Thomas Harte	75d6ec354b	Added some very basic filtering in RGB mode.	2016-01-12 16:27:09 -05:00
Thomas Harte	49a36ec9ac	Added F12 as break.	2016-01-11 22:35:52 -05:00
Thomas Harte	cba09b5490	Switched display update and RAM write order.	2016-01-11 22:29:16 -05:00
Thomas Harte	650077feac	Pulled a few things out as constants, zoomed in a little. Still in a 4:3 window though.	2016-01-11 22:18:34 -05:00
Thomas Harte	72019d0ea3	Made an attempt to get video output correct.	2016-01-11 22:08:30 -05:00
Thomas Harte	e93dbdb463	Implemented keyboard input.	2016-01-11 19:48:31 -05:00
Thomas Harte	ce916ebd6a	Fixed runaway frame generator.	2016-01-10 23:32:57 -05:00
Thomas Harte	93f7df04a0	Ensured correctly timed sampling of the interrupt line.	2016-01-10 22:55:56 -05:00
Thomas Harte	ccf20299a3	Made an attempt at getting some interrupts all up inside this thing.	2016-01-10 19:06:46 -05:00
Thomas Harte	cc5ba8243e	Fixed: turned out the power-on bit was being cleared.	2016-01-10 17:17:39 -05:00
Thomas Harte	d95414b2eb	I'm not really sure what's going wrong with paging yet but this fixes the 0xc000 byte error.	2016-01-10 12:30:24 -05:00
Thomas Harte	e07981c147	Fixed screen start address.	2016-01-09 22:52:08 -05:00
Thomas Harte	1308332a71	Hard-coded to 40 columns of black and white, here's some text, at least.	2016-01-09 22:39:46 -05:00
Thomas Harte	037602765a	This now correctly (I think) decodes information posted to the CRT. But doesn't yet post it correctly. I'm very close now, I hope.	2016-01-09 22:19:00 -05:00
Thomas Harte	07a041d788	Fixed vertical retrace sync.	2016-01-09 21:54:31 -05:00
Thomas Harte	3d6f20b7b9	Output, at last! Though sync is clearly way off.	2016-01-09 21:53:33 -05:00
Thomas Harte	09df218c01	Some output! Showing that three lines of solid sync isn't smart. But here it is.	2016-01-09 21:48:53 -05:00
Thomas Harte	b4f31edea3	Made an attempt to get RGB output mode up and running, and showing at least a box where pixels would be.	2016-01-09 21:32:56 -05:00
Thomas Harte	a900bfed65	Fixed to ensure that frame rendering wraps around, and to properly connect the Electron to its view. Now I need a working pixel shader.	2016-01-09 20:34:22 -05:00
Thomas Harte	7341f5c341	This is intended to be enough to start producing something of an output. But something's obviously still broken.	2016-01-09 20:26:40 -05:00
Thomas Harte	716bb3281b	This at least now connects up a CRT, though it never talks to it.	2016-01-07 22:26:49 -05:00
Thomas Harte	47a7654c00	Added just enough that this is probably a successful boot. I guess I'm going to need to get invested in graphics next? Hmmm.	2016-01-07 21:01:13 -05:00
Thomas Harte	8c1bfa5a05	This is the bare minimum to prove that the ROM is trying properly to boot.	2016-01-07 20:36:27 -05:00
Thomas Harte	0db8938d27	Added the option for the CSCathodeRayView to show only a subsection of the full scan area. Zoomed in a little on the 2600. Put in enough piping to give the Electron sight of its ROMs at least.	2016-01-06 23:14:36 -05:00
Thomas Harte	bfd9957c81	You now get an Electron only if you ask for a new file. That'll do for now while it's the only thing that one might want to start without supplying a file. The 6502 now starts from a defined point — being reset. The Electron is starting to grow the absolute most simple buds of its memory map.	2016-01-06 21:09:49 -05:00
Thomas Harte	c69b3256ba	Slightly simplified Swift usage.	2016-01-04 23:44:36 -05:00
Thomas Harte	616dc0b57c	Okay, so this is the absolute bare minimum about of refactoring and wiring necessary to get the [unimplemented] Electron machine pumping.	2016-01-04 23:40:43 -05:00
Thomas Harte	43ab8bbad5	Okay, so then here's a first shot at the Objective-C -> C++ bridge for the Electron.	2016-01-04 23:16:37 -05:00
Thomas Harte	ab45c1d530	Started working on a shell for the Electron emulation, including factoring out the common CRT delegate -> Objective-C bridging, serial dispatch queue and frameskipping logic from the Atari 2600 shell.	2016-01-04 23:12:47 -05:00
Thomas Harte	22fa024546	Added document XIB.	2016-01-03 20:46:39 -05:00
Thomas Harte	aa0714fe27	Started sketching out an Acorn Electron emulation, as it's a platform I'm familiar with and will force me to figure out PAL decoding. Factored out NTSC-specific parts of the display decoding logic and hence added RGB output mode.	2016-01-03 20:41:43 -05:00
Thomas Harte	96503a3ac5	Switched to nicer nullable/nonnull syntax.	2016-01-02 17:59:21 -05:00
Thomas Harte	feeedbe33b	The standard Xcode versioning updates. Nothing of substance.	2016-01-02 17:57:23 -05:00
Thomas Harte	675070c5dd	Very, _very_ minor: switched to normal C++ constructor syntax for simple variable initialisation.	2015-12-06 16:53:37 -05:00