Thomas Harte
fa933952f7
Throws in additional asserts, so far without uncovering anything.
2020-02-19 23:14:18 -05:00
Thomas Harte
3715e6b48a
Resolves potential data race on write_area_texture_.
2020-02-18 22:41:46 -05:00
Thomas Harte
95756f9716
Resolves data race on write_pointers_ close to machine setup.
2020-02-18 20:41:51 -05:00
Thomas Harte
a5e1765ce4
Eliminates potential race conditions on validity of delegate_.
2020-02-18 20:33:31 -05:00
Thomas Harte
1e4356f83a
Adds a sensible is_stereo to the MultiSpeaker.
2020-02-16 18:50:34 -05:00
Thomas Harte
545a6177bb
Makes CompoundSource mono/stereo-aware.
2020-02-16 18:45:36 -05:00
Thomas Harte
50d356be2f
Ensures all audio sources, including compound sources, announce whether they're stereo correctly.
2020-02-16 18:31:45 -05:00
Thomas Harte
9835e800ec
Fixed: individual audio generators now either are or are not stereo. The speaker acts accordingly.
2020-02-16 18:28:03 -05:00
Thomas Harte
90856a0e7a
Adds mixdown/up capability to Speaker.
...
To deal with occasions when the host machine just always is either mono or stereo, and the emulated machine must cope.
2020-02-16 13:50:18 -05:00
Thomas Harte
d55d077a95
Fixes the input buffer partial-keep step in stereo.
2020-02-16 00:20:22 -05:00
Thomas Harte
e66a3523b6
Makes some attempt at stereo support, with the Amstrad CPC being the test case.
2020-02-15 18:55:19 -05:00
Thomas Harte
e02d109864
Nudges the LowpassSpeaker towards supporting stereo generation.
2020-02-15 18:03:12 -05:00
Thomas Harte
49b8e771b5
Adds the messaging that would allow a Speaker to output stereo, semantically.
2020-02-15 13:40:19 -05:00
Thomas Harte
6bda4034c6
Ensures no input data is dropped when changing output rates.
...
I think this 'completely' deals with the problem. At least until someone wants dynamic output buffer sizes or something like that. We'll see.
2020-02-09 19:14:25 -05:00
Thomas Harte
b04daca98e
Picks a safer default construction.
2020-02-09 19:13:21 -05:00
Thomas Harte
6ae42d07a7
Retains existing output when switching filter coefficients.
...
This eliminates an issue with dynamic rate matching and throwing away the beginnings of buffers.
2020-02-09 16:42:07 -05:00
Thomas Harte
b5d6126a2d
Avoids unnecessary filter recalculation.
2020-02-09 16:32:32 -05:00
Thomas Harte
f95b07efea
Continues edging towards raster racing and/or time warping.
2020-02-06 23:35:03 -05:00
Thomas Harte
b41920990f
Moves submit step to end of line, rather than end of scan.
2020-02-04 22:15:20 -05:00
Thomas Harte
709c229cd7
Gets a bit more explicit with ScanTarget documentation.
2020-02-04 20:19:46 -05:00
Thomas Harte
8aabf1b374
Allows receivers of nullptr from begin_data to output any quantity of data.
2020-02-01 21:43:48 -05:00
Thomas Harte
019474300d
Centralises responsibility for picking irrelevant numbers for a computer-style monitor.
2020-01-30 23:26:02 -05:00
Thomas Harte
f9ce50d2bb
Adds some debugging `asserts.
2020-01-29 22:45:44 -05:00
Thomas Harte
7316a3aa88
Merge branch 'master' into FinalOverride
2020-01-26 23:42:25 -05:00
Thomas Harte
b514756272
Adds the option to run machines at a multiple of their real speeds.
...
Exposed to SDL users only, for now.
2020-01-26 13:25:23 -05:00
Thomas Harte
294e09f275
All these 'override's can be 'final's.
...
At least for the purpose of being communicative. I doubt there's much to gain in terms of compiler output — the DiskImageHolder can avoid some virtual lookups but nothing else leaps out.
2020-01-23 22:57:51 -05:00
Thomas Harte
9136917f00
Enables the Oric for 50/60Hz mode switching, inventing PAL60 for the purpose.
2020-01-23 22:14:02 -05:00
Thomas Harte
428d141bc9
Factors out the logic behind the Atari 2600's frequency switching.
2020-01-23 20:12:44 -05:00
Thomas Harte
a5f285b4ce
Enhances reported data.
2020-01-22 22:01:17 -05:00
Thomas Harte
a71c5946f0
Ensures proper manipulation of scan_statuses, leading to the correct result out of a CRTMachine.
...
Possibly with the exception of the TMS, as I appear to have uncovered an unrelated issue there.
2020-01-21 22:28:25 -05:00
Thomas Harte
e7fff6e123
Minor step towards correct answers: divide by time_multiplier_.
2020-01-20 22:33:51 -05:00
Thomas Harte
82e5def7c4
Implements get_scan_status, but for scale being incorrect.
2020-01-20 21:58:34 -05:00
Thomas Harte
d97a073d1b
Adds the necessary routine for all machines to be able to respond to get_scan_status.
...
They all just as the CRT, as all are currently based on the CRT. Which doesn't currently know the total clock rate it would need to in order properly to scale the answer to the question. Further thought coming.
2020-01-20 21:45:10 -05:00
Thomas Harte
3c760e585a
Switches to accepting a bit mask of events to run_until.
2020-01-20 16:08:21 -05:00
Thomas Harte
cb61e84868
Starts building out higher-level run_until functionality.
...
Specifically: you can now run until the next set of speaker samples has been delivered.
2020-01-20 12:12:23 -05:00
Thomas Harte
7dea99b1cc
Update comment, for sense.
2020-01-02 23:13:12 -05:00
Thomas Harte
0dae608da5
Embraces std::make_[unique/shared] in place of .reset(new .
2019-12-23 21:31:46 -05:00
Thomas Harte
274867579b
Deploys constexpr as a stricter const.
2019-12-22 00:22:17 -05:00
Thomas Harte
e9318efeb6
Switches to std::make_shared/make_unique in a bunch of applicable places.
...
No doubt many more similar improvements are available, these are just the ones that were easy to find.
2019-12-21 23:34:25 -05:00
Thomas Harte
cc7ff1ec9e
Corrects typo.
2019-11-09 14:59:35 -05:00
Thomas Harte
9d12ca691f
Makes meaning of 2048 here explicit.
2019-11-09 14:59:16 -05:00
Thomas Harte
68f9084d9e
Fixes timing of wrap.
2019-11-07 23:24:51 -05:00
Thomas Harte
f9a35c6636
Corrects potential wrap error for non-single-byte targets.
2019-11-07 22:23:26 -05:00
Thomas Harte
6c75c60149
Merge branch 'master' into AtariST
2019-11-05 22:05:51 -05:00
Thomas Harte
35f1a7ab10
Resolves a potential out-of-bounds array access.
...
Risk was: allocation exactly joins end of buffer. In which case the next get_data won't wrap the texture y coordinate since it won't spot an x overage.
2019-11-05 21:47:40 -05:00
Thomas Harte
1c154131f9
Expands size of storage in Cycles/HalfCycles; adjusts widely to compensate.
2019-10-29 22:36:29 -04:00
Thomas Harte
92847037b3
Merge branch 'master' into AtariST
2019-10-27 21:40:51 -04:00
Thomas Harte
4266264449
Switches to the more idiomatic .empty().
2019-10-27 21:31:31 -04:00
Thomas Harte
3794d94b68
Adds a sanity check on alignment.
2019-10-27 14:09:02 -04:00
Thomas Harte
d1dd6876b5
Adds the option to affix a standard prefix to log messages.
2019-10-20 20:38:55 -04:00
Thomas Harte
684644420a
Increases scan buffer availability.
2019-10-20 17:22:41 -04:00
Thomas Harte
9c7aa5f3fc
Attempts also to spot data writes without allocations.
2019-10-19 18:26:56 -04:00
Thomas Harte
418cd07e17
Adds a check against overrunning data.
2019-10-19 18:17:44 -04:00
Thomas Harte
19198ea665
Improves const usage.
2019-07-16 22:13:47 -04:00
Thomas Harte
60cedca97b
Adds cmath in support of ceilf.
2019-07-08 18:14:03 -04:00
Thomas Harte
f6f9024631
Corrects Macintosh aspect ratio (and framing).
2019-06-13 18:41:38 -04:00
Thomas Harte
66540ff86f
Permits end_data only after a begin_data.
2019-06-03 21:56:53 -04:00
Thomas Harte
b860ba2ee3
Disallows smaller buffer use for 'sharp' displays and tightens sampling window.
2019-06-03 15:58:14 -04:00
Thomas Harte
d25ab35d58
Finally gets setw usage correct.
2019-04-15 12:41:56 -04:00
Thomas Harte
6f7dd10d95
Reduces draw/update contention.
...
This won't yet have any effect on either port owing to the way they handle contexts, but here it is.
2019-03-07 19:28:32 -05:00
Thomas Harte
24fb95291a
Reverts to support a full RGBA colour buffer.
2019-03-07 19:22:40 -05:00
Thomas Harte
84422676cb
Switches to more coherent logic about buffer sizing.
2019-03-06 19:19:30 -05:00
Thomas Harte
7441e3f4c5
Corrects aspect ratio when changing accumulation texture size.
2019-03-05 22:10:32 -05:00
Thomas Harte
f18132d674
Makes effort to round out draft 1 of Outputs::Display::Metrics.
2019-03-05 22:01:58 -05:00
Thomas Harte
5660007221
Experimentally introduces adaptive quality intermediate buffers.
2019-03-05 21:41:20 -05:00
Thomas Harte
86a6b04d4a
Begins attempts to keep track of display metrics.
...
i.e. a system that can both make smart decisions about when to use a lower resolution, and hopefully allow some sort of flywheel-esque horizontal retrace synchronisation. And possibly some raster beam chasing?
2019-03-04 21:54:50 -05:00
Thomas Harte
641e349f33
Switches to an 8bpp stencil, for Nvidia compatibility.
2019-03-03 20:38:24 -05:00
Thomas Harte
ccdeb3fbc8
Ensures draw is a no-op prior to pipeline setup.
2019-03-03 15:04:14 -05:00
Thomas Harte
bee0d09877
Splits display update and draw functions.
...
On the Mac, draw is now called without an update for resizing events, and
anything else requested by AppKit. In all other cases — including from
the SDL version — both are called as if they were still a single function.
2019-03-02 19:33:28 -05:00
Thomas Harte
d97348dd38
Eliminates dangling uses of printf.
2019-03-02 18:07:05 -05:00
Thomas Harte
d122535a65
Unifies the OpenGL screenshot code and corrects it for arbitrary alignment.
2019-02-27 21:05:02 -05:00
Thomas Harte
db078c7363
Minor tweak: don't start counting phase from zero.
...
This should ensure no first pixel issues resulting from clamping.
2019-02-27 18:51:51 -05:00
Thomas Harte
6b4f6971de
Disables upper limit on frame buffer size.
...
Filtering is sufficiently imperfect as to make this justifiable only when performance requires it. So I need a test for that. Marked as TODO.
2019-02-26 22:39:07 -05:00
Thomas Harte
79707a3c66
Improves filtering slightly, and ensures coefficients are always set when needed.
2019-02-26 22:35:55 -05:00
Thomas Harte
694783efe9
Brings S-Video inside the group that filters luminance.
...
Thereby revealing some sort of error in offset selection.
2019-02-26 22:27:40 -05:00
Thomas Harte
68c5474e36
Reintroduces basic filtering for RGB mode (and introduces it for monochrome composite).
2019-02-26 22:21:49 -05:00
Thomas Harte
cd055a0298
Introduces an upper bound on output resolution, and resolves full-screen clear colour.
2019-02-25 22:07:48 -05:00
Thomas Harte
8f2abab0d9
Ensures texture targets are initially clear.
2019-02-25 21:55:14 -05:00
Thomas Harte
4c5dee866b
Ensures a proper black fill for Luminance8Phase8 input data.
2019-02-25 21:32:15 -05:00
Thomas Harte
7bb90c78d9
Resolves out-of-bounds initial condition whenever this loop began with start_line = 2047.
...
This, I believe, was the remaining cause of screen flashes.
2019-02-24 19:50:19 -05:00
Thomas Harte
a6e61ef83b
Reverts the clear colour to black.
...
The change was related to debugging; it was not intentionally committed.
2019-02-24 14:36:08 -05:00
Thomas Harte
c775a6c0f8
Introduces but disables a couple of bits of logging that might be helpful again in the future.
2019-02-24 14:30:39 -05:00
Thomas Harte
2f9e825728
Forces the outward-communicated composite angles to have the same precision as the cycle counts.
...
While also making a minor improvement to output range. Which is neither here nor there.
2019-02-24 14:29:43 -05:00
Thomas Harte
2f491b5be1
Reintroduces fragment snapping for composite colour sampling.
...
Thereby uncovers some sort of slightly-off recording of scan lines. On the Apple II, individual scans reach the ScanTarget at a density of exactly 0.25 colour cycles per pixel. So that timing information propagates exactly. But the whole lines that are composed via ::announce end up trying to fit 0.250154 colour cycles per pixel. Which creates a phase error as the display progresses from left to right.
This will need to be resolved in order to be able to fix the Apple II's intended colour phase. But, also, it's probably what was wrong with the Oric. And, quite possibly, why the single-step shader didn't work.
2019-02-24 13:39:14 -05:00
Thomas Harte
de7ebead23
Ensures the line_allocation_has_failed_ condition can be exited.
2019-02-21 22:30:41 -05:00
Thomas Harte
c0c4704419
Ensures that failure to allocate a line blocks all other allocations.
2019-02-21 21:38:48 -05:00
Thomas Harte
080f949f89
Ensures OpenGL version is logged prior to any other GL calls.
2019-02-20 20:21:17 -05:00
Thomas Harte
9f6956bd87
Awards default values to Scan, to appease GCC 7.3.
2019-02-19 21:40:42 -05:00
Thomas Harte
ddf5e1632d
Ensures log memory is automatically initialised.
2019-02-18 22:08:03 -05:00
Thomas Harte
40bfde41cb
Adds an OpenGL version shout out.
2019-02-18 22:01:56 -05:00
Thomas Harte
e0751af56d
Handles the 0 return case.
2019-02-18 21:56:49 -05:00
Thomas Harte
3979faf43b
Gets more explicit about potential causes of failure.
2019-02-18 21:53:35 -05:00
Thomas Harte
878b480a44
Tidies up marginally.
2019-02-18 21:37:07 -05:00
Thomas Harte
b35b6b2ba8
Resolves a couple of missing #includes for cassert.
2019-02-18 21:29:39 -05:00
Thomas Harte
6b2e1fe62b
Makes error reporting more communicative.
2019-02-18 11:13:54 -05:00
Thomas Harte
8ecf885629
Attempts to put in better OpenGL safety rails.
2019-02-18 10:29:40 -05:00
Thomas Harte
6d76b7cd94
Attempts to ensure proper colour output during alternating PAL lines.
2019-02-17 21:50:15 -05:00
Thomas Harte
7bd721f334
Resolves improper state if an end-of-frame clear is triggered by the first new line.
2019-02-17 21:49:53 -05:00
Thomas Harte
77bebd4a65
Accounts for periods near an expected sync after a sync actually occurred.
2019-02-12 22:30:40 -05:00
Thomas Harte
ec8f1157c8
Corrects S-Video output.
2019-02-12 19:31:12 -05:00
Thomas Harte
037cbd534e
Corrects phase error in chrominance separation.
2019-02-12 19:24:28 -05:00
Thomas Harte
208ef70e31
Corrects documentation.
2019-02-12 18:55:58 -05:00
Thomas Harte
2fa4c59523
Correction: use the QAM texture for colours.
2019-02-12 18:42:28 -05:00
Thomas Harte
cda0a2de79
Establishes QAM colour buffer lookups within the composite colour path.
...
Subject to errors in channel scaling and absolute position.
2019-02-10 23:02:31 -05:00
Thomas Harte
008f50832c
Fixed: the two shaders that use a common input array should use common bindings.
2019-02-10 22:39:24 -05:00
Thomas Harte
c94acb1ca2
With a little more debug logging, discovered an issue with incrementing by four.
2019-02-09 22:45:20 -05:00
Thomas Harte
d341f98b09
Corrects horizontal scale.
2019-02-09 18:52:43 -05:00
Thomas Harte
e35a3ab566
Ensures proper uniforms and varyings for the qam_separation_shader.
2019-02-09 18:35:14 -05:00
Thomas Harte
b3b4b7cf0c
Corrects QAM texture generation logic.
2019-02-09 17:20:13 -05:00
Thomas Harte
1cd6d58f17
Restores S-Video through line, as monochrome.
2019-02-09 17:13:43 -05:00
Thomas Harte
eecd4417e7
Bites the bullet and accepts that an additional texture will be useful for QAM separation.
2019-02-09 16:54:31 -05:00
Thomas Harte
798cc58f76
Simplifies the composite colour shader no longer to handle colour.
2019-02-05 19:22:35 -05:00
Thomas Harte
6ba1194d74
Sets a clear colour appropriate for phase-linked luminance clearing.
2019-02-03 22:33:04 -05:00
Thomas Harte
e5f75b5df2
Resolves repetition between svideo_sample and composite_sample.
2019-02-03 22:09:16 -05:00
Thomas Harte
b75ad3def2
Updates the multimachine for the ScanTarget world.
2019-02-03 15:07:22 -05:00
Thomas Harte
caf72afcb4
Switches to a seven-point scheme, to determine whether falsely-shared luminance is at fault.
...
It doesn't seem to be, alas.
2019-01-31 21:19:30 -05:00
Thomas Harte
687e0b376e
Enhances error checking around setting of uniforms.
2019-01-31 21:17:49 -05:00
Thomas Harte
122857e5b5
Improves automatic index generation, to allow for matrices implicitly taking up to four slots.
2019-01-31 18:49:01 -05:00
Thomas Harte
5002290428
Makes consistent use of textureLod rather than texture.
2019-01-26 22:05:15 -05:00
Thomas Harte
d09ac3384f
Eliminates some old-school manual memory management.
...
In favour of additional copying, but I still think this is safer.
2019-01-25 22:54:23 -05:00
Thomas Harte
b6a4a7e0a5
This is no longer TODO.
2019-01-25 22:47:15 -05:00
Thomas Harte
c87994336c
Switches the Shader class to using LOG.
2019-01-25 22:45:47 -05:00
Thomas Harte
85ad490089
Offers a less error-prone route to attribute binding.
2019-01-25 21:56:55 -05:00
Thomas Harte
a321ff3037
Adds some default values.
2019-01-25 20:21:24 -05:00
Thomas Harte
68d6feaa03
Adds missing includes and gets more explicit about exceptions.
2019-01-25 20:19:50 -05:00
Thomas Harte
74e1a9a621
Declines improper use of offset within loops and adds missing header.
2019-01-25 20:14:53 -05:00
Thomas Harte
6a43fc5df0
Resolves a GCC-troubling circular declaration issue vs. atomic.h.
2019-01-25 19:30:39 -05:00
Thomas Harte
312f38906b
Corrects two improper include paths.
2019-01-25 19:19:23 -05:00
Thomas Harte
20b4896940
Eliminates the dead stuff of CRTConstants.hpp.
2019-01-25 19:11:39 -05:00
Thomas Harte
6a93d2d006
Corrects some minor spaces-instead-of-tabs errors.
2019-01-24 22:59:03 -05:00
Thomas Harte
ae0bc7e7aa
Calculates sampling offsets up front.
2019-01-23 20:53:10 -05:00
Thomas Harte
a8acadbe13
Gives the shader builders freer rein over what to use as inputs, and turns angles into a varying.
...
All dropping out during the never-ending diagnosis at play here.
2019-01-22 22:20:12 -05:00
Thomas Harte
727f2e2ba0
Updates to the ScanTarget world.
2019-01-17 22:28:02 -05:00
Thomas Harte
a6683cb9b8
Avoids scaling luminance prior to extracting chrominance.
2019-01-17 20:52:33 -05:00
Thomas Harte
5ceb711bd3
Allows amplitude to be specified even for a default colour burst.
2019-01-17 20:47:42 -05:00
Thomas Harte
d593796dae
Reintroduces less-filtered black and white video where there's no colour burst.
2019-01-16 22:22:29 -05:00
Thomas Harte
ef0dbc2a41
Undoes hard-coding of target framebuffer and display gamma.
2019-01-15 21:33:30 -05:00
Thomas Harte
6c49953115
Returns gamma correction, and corrects Amstrad CPC brightness.
2019-01-14 22:56:08 -05:00
Thomas Harte
55290f4dad
Attempts a fix of frame_was_complete_ logic, to try to eliminate black flashes.
2019-01-14 21:42:45 -05:00
Thomas Harte
bb03d2f2ad
Removes redundant enumeration.
2019-01-13 23:07:50 -05:00
Thomas Harte
7aec5be61a
Cleans up and simplifies shader creation.
2019-01-13 22:49:01 -05:00
Thomas Harte
e89e55a9bb
Attempts to factor actual composite amplitude into output.
2019-01-13 14:45:17 -05:00
Thomas Harte
7c2c243985
Corrects sample spacing, and removes a lot of detritus.
2019-01-12 18:36:54 -05:00
Thomas Harte
25a1f23fc0
Takes a first shot at re[re,re]-implementing composite colour decoding.
2019-01-12 17:59:24 -05:00
Thomas Harte
27541196cc
Corrects Luminance8Phase8 and PhaseLinkedLuminance8 composite encodings.
2019-01-11 22:46:50 -05:00
Thomas Harte
5d9521fcb9
Advances back to a semi-complete monochrome composite output.
...
i.e. composite phase and amplitude is ostensibly flowing to its new destination.
2019-01-11 22:02:15 -05:00
Thomas Harte
028e530232
Shunts output shader to its proper place.
2019-01-06 22:59:14 -05:00
Thomas Harte
906a2ff6eb
Switches to using clock times for buffer merging and output.
2019-01-06 18:47:01 -05:00
Thomas Harte
c392c819c1
Switches to using the announce is_visible flag to spot line ends.
2019-01-06 13:37:34 -05:00
Thomas Harte
e9d9ff0da0
Enhances ScanTarget to provide additional timing information.
2019-01-05 23:09:17 -05:00
