Thomas Harte
87474d5916
Corrects memptr behaviour of OUT (C), 0.
2020-02-27 20:38:27 -05:00
Thomas Harte
a366077509
Updates failure count.
2020-02-26 22:26:23 -05:00
Thomas Harte
3b0df172a7
Corrects memptr behaviour of JP nn.
2020-02-26 22:02:15 -05:00
Thomas Harte
8878396339
Corrects DJNZ memptr behaviour.
2020-02-26 21:42:31 -05:00
Thomas Harte
da6d5e2e24
Adds memptr testing.
...
30 failures, for the record.
2020-02-26 20:05:14 -05:00
Thomas Harte
18bb90329a
Apparently tStates is decimal. Of course it is.
2020-02-26 20:04:55 -05:00
Thomas Harte
604bb50adf
Imports and converts updated FUSE tests.
...
Now with added MEMPTR.
2020-02-25 23:15:27 -05:00
Thomas Harte
e4887c0c56
Corrects JR cc tests.
2020-02-24 23:36:05 -05:00
Thomas Harte
3097c4ccae
Improves MEMPTR testing and some results.
2020-02-24 23:32:18 -05:00
Thomas Harte
7959d243f6
Adds single-stepping. Of a kind.
2020-02-24 23:31:42 -05:00
Thomas Harte
79dd402bc8
Consolidates different test port input selection.
2020-02-23 16:12:28 -05:00
Thomas Harte
3f3229851b
Implements MEMPTR for IN.
2020-02-23 00:32:33 -05:00
Thomas Harte
989628a024
Switches to looking for "Result: all tests passed." as a success/failure test.
2020-02-22 23:07:14 -05:00
Thomas Harte
e0475343f5
Makes collated text easier to read.
2020-02-22 18:58:24 -05:00
Thomas Harte
da0a9113d4
Introduces the full range of tests.
...
Albeit that I don't know the correct output yet.
2020-02-22 18:44:15 -05:00
Thomas Harte
cf7ab97451
Gets the first test to run (and terminate).
2020-02-22 18:42:23 -05:00
Thomas Harte
2370575eb5
Starts introducing the Patrik Rak tests.
2020-02-22 15:49:36 -05:00
Thomas Harte
825b68e5c4
Adds separate entry points for zexall and zexdoc.
2020-02-22 12:34:47 -05:00
Thomas Harte
851cba0b25
Corrects lambda capture.
2020-02-22 12:34:16 -05:00
Thomas Harte
9ca2d8f9f2
Tried to be less lazy with lambda captures.
...
This is primarily defensive.
2020-02-14 23:39:08 -05:00
Thomas Harte
085529ed72
Makes the shifter behaviour conform to its documentation.
2020-02-02 17:26:39 -05:00
Thomas Harte
8b1f183198
Reduce test duration much closer to two frames.
2020-01-28 23:25:01 -05:00
Thomas Harte
5c4623e9f7
Adds a sequence-point test for 72Hz mode.
...
Which immediately appears to trigger the hsync issue I'm also seeing in manual testing.
2020-01-28 20:27:24 -05:00
Thomas Harte
189122ab84
Fixes test units.
2020-01-27 20:35:58 -05:00
Thomas Harte
294e09f275
All these 'override's can be 'final's.
...
At least for the purpose of being communicative. I doubt there's much to gain in terms of compiler output — the DiskImageHolder can avoid some virtual lookups but nothing else leaps out.
2020-01-23 22:57:51 -05:00
Thomas Harte
f42655a0fc
Promote DigitalPhaseLockedLoop to a template, simplify to O(1) add_pulse.
2020-01-12 17:25:21 -05:00
Thomas Harte
6595f8f527
Introduces a timing test for LSL. Which already passes.
2020-01-08 22:35:28 -05:00
Thomas Harte
c1bae49a92
Standardises on read and write for bus accesses.
...
Logic being: name these things for the bus action they model, not the effect they have.
2020-01-05 13:40:02 -05:00
Thomas Harte
9f2f547932
Adds and satisfies test on the function code word.
...
Thanks to ijor's "68000 Address and Bus Error Stack Frame" re: contents.
2020-01-04 23:58:07 -05:00
Thomas Harte
f0d5bbecf2
Introduces a test of stack contents after an address error.
...
Fixes: stacked PC, address of fault.
2020-01-04 23:22:07 -05:00
Thomas Harte
a28c52c250
Fixes A7-relative JSRs.
...
I completely withdraw my earlier statement re: the test cases.
2020-01-04 22:22:33 -05:00
Thomas Harte
937cba8978
After rerunning all tests, adds some notes on questionable results.
...
Also renames a file. But no code changes are currently suggested, at least until I can learn more about DIVU/DIVS.
2020-01-04 16:31:45 -05:00
Thomas Harte
ca12ba297b
Renames all files that test multiple opcodes; introduces DIV and MUL tests.
2020-01-03 22:43:24 -05:00
Thomas Harte
617e0bada9
Adds some minor extra testing. Highly duplicative, to be honest.
2020-01-02 23:14:05 -05:00
Thomas Harte
cb7d6c185c
Further expands test coverage.
2020-01-01 20:00:37 -05:00
Thomas Harte
5be30b1f7b
Introduces further comparative tests, prompting a new CHK fix.
...
Specifically: how to set N when both is_under and is_over are true, and to eliminate a failure fully to prefetch in the longer addressing modes.
2020-01-01 19:11:36 -05:00
Thomas Harte
b33218c61e
Fixes reload test, which really needs to sense the CRT-headed vsync output.
...
i.e. not the one heading back to the CPU.
2019-12-29 20:55:34 -05:00
Thomas Harte
5361ee2526
Adds specific Union Demo test.
2019-12-29 17:48:43 -05:00
Thomas Harte
214b6a254a
Adds a delay on visibility of the hsync signal, and a test on address reload.
2019-12-29 17:37:09 -05:00
Thomas Harte
93f6964d8a
Introduces some preliminary line length unit tests.
...
Thereby fixes one potential issue with load_ toggling.
2019-12-28 22:50:34 -05:00
Thomas Harte
d26ce65236
Introduces an RTR test.
2019-12-25 19:50:12 -05:00
Thomas Harte
ed831e5912
Fixes test syntax errors.
2019-12-23 22:13:25 -05:00
Thomas Harte
0dae608da5
Embraces std::make_[unique/shared] in place of .reset(new .
2019-12-23 21:31:46 -05:00
Thomas Harte
a847654ef2
Corrects various old-fashioned bits of indentation, plus the odd const.
2019-12-22 00:00:23 -05:00
Thomas Harte
9464658d1e
Adds a count summary.
2019-12-17 22:19:23 -05:00
Thomas Harte
e969b386f1
Eliminates DIVU/S and MULU/S from this file.
2019-12-17 20:15:11 -05:00
Thomas Harte
0d23f141d6
Regenerates without accidentally hitting MODE to SR.
2019-12-16 22:37:57 -05:00
Thomas Harte
ba2436206f
Withdraws test of CHK (exception taken).
2019-12-16 20:00:42 -05:00
Thomas Harte
60a9b260b1
Corrects collection of instruction codes.
2019-12-16 00:01:18 -05:00
Thomas Harte
e603fc6aaa
Simplifies failure output for me.
2019-12-15 21:26:47 -05:00
