Thomas Harte
|
8f62211f5e
|
Wired up the 1540 as a PLL delegate. Which prima facie means it should start receiving a bit stream. Except that I clearly have something in the timing way off — either my flux transitions are far too short or I need to significantly increase the clock rate on the PLL.
|
2016-07-29 12:08:18 -04:00 |
|
Thomas Harte
|
89a1881fef
|
Started turning the 1540 into an actual disk drive.
|
2016-07-29 11:03:09 -04:00 |
|
Thomas Harte
|
6532b3a8c8
|
Filled in a calculation of clocks per bit that'll do.
|
2016-07-29 07:51:07 -04:00 |
|
Thomas Harte
|
f984de42a3
|
Took some small steps towards having a disk drive that at least can select a track and pump relevant events into a PLL.
|
2016-07-29 07:31:02 -04:00 |
|
Thomas Harte
|
0e581c7607
|
Factored out the stuff of running a timed event loop from the TapePlayer.
|
2016-07-29 07:15:46 -04:00 |
|
Thomas Harte
|
e55db0cfe8
|
Made an attempt to eliminate creeping tape processing accuracy misses, which implied factoring out the GCM and LCD functions, which I then felt didn't really amount to signal processing.
|
2016-07-29 05:19:01 -04:00 |
|
Thomas Harte
|
5c1614ce7b
|
Attempted to simplify, very slightly.
|
2016-07-28 14:35:39 -04:00 |
|
Thomas Harte
|
015cea494d
|
Switched to a much-more straightforward PLL. I think I'm just fiddling now rather than moving forwards. Probably time to move on?
|
2016-07-28 11:32:14 -04:00 |
|
Thomas Harte
|
e061e849d4
|
Had a second bash at the PLL. Probably I should read some of the literature.
|
2016-07-27 16:24:24 -04:00 |
|
Thomas Harte
|
63f39608a6
|
Added just enough to get back to a working build.
|
2016-07-15 20:35:19 -04:00 |
|
Thomas Harte
|
165dbd9651
|
Started fleshing this out a bit. Hopefully.
|
2016-07-15 08:28:34 -04:00 |
|
Thomas Harte
|
0aa90b943b
|
Switched to specifying bit length as a quotient for the purposes of a PCMSegment and verified that I had the logic for picking a Commodore time zone backwards: bigger numbers are faster, not slower.
Started sketching out a DiskDrive class.
|
2016-07-15 06:51:11 -04:00 |
|
Thomas Harte
|
6afd619791
|
Eliminated floating point arithmetic.
|
2016-07-14 19:47:00 -04:00 |
|
Thomas Harte
|
6b4fec37ff
|
Moved down to a single divide.
|
2016-07-14 19:45:08 -04:00 |
|
Thomas Harte
|
481475a0f4
|
Switched to a full-on linear regression. Which causes the current tests to pass.
|
2016-07-14 19:42:01 -04:00 |
|
Thomas Harte
|
6d6b26b99f
|
Actually made things worse.
|
2016-07-14 07:32:27 -04:00 |
|
Thomas Harte
|
d8d3464c56
|
Made a quick-hack attempt at PLL synchronisation. Which doesn't work.
|
2016-07-14 07:31:23 -04:00 |
|
Thomas Harte
|
d1fe07f14d
|
Added test of perfect DPLL input timing.
|
2016-07-12 21:42:23 -04:00 |
|
Thomas Harte
|
94db45456e
|
Started sketching out the basic form here, albeit that it doesn't yet do _the only thing it advertises itself as useful for_.
|
2016-07-12 20:23:56 -04:00 |
|
Thomas Harte
|
75d95c0bc0
|
Sketched out an interface for a digial PLL. Not persuaded yet. Baby steps.
|
2016-07-11 22:12:58 -04:00 |
|
Thomas Harte
|
1e9eedc314
|
Factored out the PCM track since it's going to be a useful construct for almost every file format. Documented it a little better.
|
2016-07-10 18:36:52 -04:00 |
|
Thomas Harte
|
66895d3ac7
|
Actually, I think this is the correct conversion from received speed to clock rate. It'll become obvious if it's not when I get back to working on the 1541 itself.
|
2016-07-10 18:24:12 -04:00 |
|
Thomas Harte
|
19ee430d4a
|
Made an effort to support zoned tracks, at least.
|
2016-07-10 18:07:53 -04:00 |
|
Thomas Harte
|
6593caca93
|
Switched to a probably more helpful way around of expecting bits in bytes.
|
2016-07-10 16:21:52 -04:00 |
|
Thomas Harte
|
845a00ccef
|
Attempted via linear search to implement PCMTrack::get_next_event.
|
2016-07-10 16:17:25 -04:00 |
|
Thomas Harte
|
f9510c1b67
|
Put sufficiently much of PCMTrack into place to get to a stored list of segments, having determined a common clock rate between them and therefore a complete track length.
|
2016-07-10 16:10:05 -04:00 |
|
Thomas Harte
|
4ae9f5ad5d
|
Added preliminaries of reading the speed zone information.
|
2016-07-10 13:42:45 -04:00 |
|
Thomas Harte
|
8ae78ba4e0
|
Fixed signature check and fseek parameter order.
|
2016-07-10 13:32:59 -04:00 |
|
Thomas Harte
|
ff49857f5c
|
Started sketching out support for the G64 file format.
|
2016-07-10 10:17:53 -04:00 |
|
Thomas Harte
|
9e3d6b762b
|
Sketched out the generic interface for a disk, documenting it and the tape interface while I'm here.
|
2016-07-10 08:54:39 -04:00 |
|
Thomas Harte
|
c306d705e1
|
Made a quick first attempt at all-the-way-through tape wiring for the Vic.
|
2016-06-26 19:43:09 -04:00 |
|
Thomas Harte
|
37ba42a52f
|
Factored out the stuff of playing a tape, started basic sketch of the Vic-related classes.
|
2016-06-26 19:03:57 -04:00 |
|
Thomas Harte
|
ee19417ded
|
Made an attempt quickly to implement parsing of the Commodore .TAP file format.
|
2016-06-25 16:09:32 -04:00 |
|
Thomas Harte
|
21ca1ef86b
|
Started attempting to clarify instance variable usage.
|
2016-03-12 23:19:10 -05:00 |
|
Thomas Harte
|
2b8fb5b615
|
Made an attempt to fix my 0114 implementation.
|
2016-02-20 23:13:58 -05:00 |
|
Thomas Harte
|
f7fc7cb932
|
Implemented some portion of 0114; ensured I'm safely skipping chunks in all cases.
|
2016-02-20 22:18:00 -05:00 |
|
Thomas Harte
|
ec3cccbb0d
|
Working towards HQ UEF support: fixed bug whereby writing to tape output would reset input pulse stepper; added support for chunk 0116 and approximate support for 0113.
|
2016-02-20 22:03:14 -05:00 |
|
Thomas Harte
|
2e3ba6bbb2
|
Removed some logging.
|
2016-02-07 14:42:40 -05:00 |
|
Thomas Harte
|
adc6838ba0
|
Continued slow migration of shader ownership to CRT. Attempted to start debugging the tape interface.
|
2016-01-27 21:35:57 -05:00 |
|
Thomas Harte
|
e65cd4cf06
|
Some data is marginally reaching the CPU from the tape.
|
2016-01-19 22:05:34 -05:00 |
|
Thomas Harte
|
832797182f
|
Update TapeUEF.cpp
Corrected chunk for which _tone_length is used, definition of a carrier tone chunk.
|
2016-01-19 18:59:10 -05:00 |
|
Thomas Harte
|
127684c590
|
With silence and high tone implemented, this may well hit a large proportion of existing files.
|
2016-01-18 19:45:14 -06:00 |
|
Thomas Harte
|
7d6214e078
|
This likely gets chunks 0100 and 0102 correct.
|
2016-01-18 19:37:36 -06:00 |
|
Thomas Harte
|
5a39e42413
|
Wired up enough such that some basic attempt at parsing a UEF occurs.`
|
2016-01-18 17:06:09 -06:00 |
|
Thomas Harte
|
2779f0e569
|
Statred working on support for at least the most fundamental file format.
|
2016-01-18 15:46:41 -06:00 |
|