399 Commits

Author	SHA1	Message	Date
Thomas Harte	b4159295f6	Switched to using quads for intermediate draws. The specific concern is the flexibility offered in the GL spec as to line drawing algorithms. And even if a driver implements exactly to spec then it should omit the final pixel.	2017-01-11 21:18:41 -05:00
Thomas Harte	d0a93409e6	Made an attempt to simplify in-shader phase calculation, now that output position is a direct multiple of phase.	2017-01-11 08:18:00 -05:00
Thomas Harte	4c3669f210	Reduced precision of input phase, but I'm not necessarily persuaded by it as a move. However it's clear that something is off in that whole area. But if phase is locked by output position, do I need to retain this level of complexity? Also ensured that intermediate buffers prior to the final are sampled using the nearest sampling mode, also to reduce precision errors.	2017-01-10 22:08:07 -05:00
Thomas Harte	eeb646868b	Switched off filtering, at least temporarily, to try to ensure that sampling is all where it should be.	2017-01-08 19:53:08 -05:00
Thomas Harte	3d789732a2	Switched back to full buffer clearing. Until I can figure out the source of noise.	2017-01-08 19:50:31 -05:00
Thomas Harte	d2a7d39749	Ensured the output lock isn't held while talking to the delegate.	2017-01-08 19:49:21 -05:00
Thomas Harte	9521718120	Colour phase is multiplied by 255, not 256.	2017-01-08 17:21:26 -05:00
Thomas Harte	28909e33ca	Eliminated phaseCyclesPerTick as implied.	2017-01-08 16:48:02 -05:00
Thomas Harte	79632b1d34	Instituted de-escalating phase-related extensions, definitively to kill rounding error edges.	2017-01-08 16:24:22 -05:00
Thomas Harte	7ad64ff16b	Made further efforts to support throughput via memory barrier.	2017-01-08 14:47:16 -05:00
Thomas Harte	be48c950b4	Started taking steps towards using a texture barrier where possible to reduce all of my framebuffer binds. Some output appears, but it's not correct.	2017-01-08 11:13:20 -05:00
Thomas Harte	0487b8c178	Definitively eliminated the additional y filtering step; if I'm going to work to ensure always four samples per colour cycle, I can put the channel separation coefficients directly into their shaders, cutting down on samples.	2017-01-07 16:02:33 -05:00
Thomas Harte	5740015f56	Temporarily disabled composite processing to show the pure stream. Fixed both automatic calculations of phase — per line and, at input, per pixel.	2017-01-07 12:38:00 -05:00
Thomas Harte	c84004bfa3	Fixed: colour_cycle_numerator_ doesn't need to be multiplied by the time multiplier because it'll get that for free from the calculation of next_run_length.	2017-01-06 21:36:19 -05:00
Thomas Harte	c746a3711f	Temporarily disabled my attempt to be clever with bilinear filtering when applying a lowpass filter. Will need to investigate.	2017-01-04 08:06:18 -05:00
Thomas Harte	aa7774a9a6	Experimental: up the chroma accuracy, just let the luma go straight through. Subject to figuring out how I'm still losing so much precision.	2017-01-03 22:41:34 -05:00
Thomas Harte	a836120945	Restored proper colour separation, but somewhere a massive hit in horizontal resolution is happening — much greater than one would expect from the sample size picked. So investigation to come.	2017-01-03 22:32:07 -05:00
Thomas Harte	7d60df9075	Added the option for both intermediate and output shaders to use only a portion of the input/output texture; made an attempt to pick an appropriate proportion in order to align signal sampling with the colour subcarrier.	2017-01-03 22:16:52 -05:00
Thomas Harte	f2b8b26bc4	Started throwing some comments into my shaders.	2017-01-03 21:16:38 -05:00
Thomas Harte	34d213dec4	Decreased Y resolution, again also hopefully temporarily.	2016-12-10 15:35:38 -05:00
Thomas Harte	81a102d951	Upped intermediate buffer size, at least temporarily, while I look for the source of the interference patterns I'm seeing.	2016-12-10 15:20:10 -05:00
Thomas Harte	0e71802b92	Reduced Oric video to single nibble constants. Removed attempt at asynchronous flush as no longer required.	2016-12-10 14:17:46 -05:00
Thomas Harte	a549fd1ecc	Introduced the ability simply to piggy-back off the CRT's natural phase for the colour burst, thereby eliminating a couple of redundant independent attempts in the Oric and Electron.	2016-12-10 13:42:34 -05:00
Thomas Harte	5216dda675	Added some brief extra exposition to the texture builder, cut all internal tex_x/y and source_divider stuff from the CRT.	2016-12-06 19:08:55 -05:00
Thomas Harte	33d52bb573	Ensured no over-moving.	2016-12-06 19:02:18 -05:00
Thomas Harte	4ff33254e1	Sought to shift locking back up to the CRT. And to be a bit more RAII-ish.	2016-12-06 18:48:30 -05:00
Thomas Harte	60f9ddfde8	Fixed start test and added incrementation of start locations.	2016-12-06 08:08:57 -05:00
Thomas Harte	f388ba11cc	Missed an initialisation. Fixed!	2016-12-06 07:26:23 -05:00
Thomas Harte	0fee8096c1	Made an attempt to shuffle the texture builder to a similar flush/submit pattern as the input builder. Don't care about thread safety yet, as it's obvious I'm going to need to move that back up to the CRT.	2016-12-06 07:24:07 -05:00
Thomas Harte	0edc043378	Started introducing an extra layer of indirection so as to be able to bind the texture builder to the same flush and submit patern as the array builder.	2016-12-03 20:47:19 -05:00
Thomas Harte	cb3c837e30	Simplified interface by baking in last-minute-only updates.	2016-12-03 18:19:12 -05:00
Thomas Harte	0220d33562	Resolved failure of initial state setting, which was causing tests sometimes to fail.	2016-12-03 16:42:10 -05:00
Thomas Harte	c5016a3eaa	Completed flight of 'Outputs' to postfix underscores.	2016-12-03 11:02:34 -05:00
Thomas Harte	7c85cb62e4	Moved underscores, removed indirections where they're not necessary, converted those names that were still looking very Objective-C and moved the GL fence variable into the private area, where it should always have been.	2016-11-21 12:14:52 +08:00
Thomas Harte	bc03e12dc5	Switched to suffix underscores.	2016-11-21 11:57:45 +08:00
Thomas Harte	340607e13e	Switched the flywheel to suffix underscores.	2016-11-21 11:48:31 +08:00
Thomas Harte	e1285028aa	Removed a redundant clear and some dead code.	2016-11-21 11:42:45 +08:00
Thomas Harte	7b38247ab3	Updated outdated comments.	2016-11-21 11:40:13 +08:00
Thomas Harte	d7d0ed378a	Only the final intermediate buffer needs clearing, on reflection.	2016-11-21 11:26:07 +08:00
Thomas Harte	c89345c639	Reduced buffer size.	2016-11-21 11:21:14 +08:00
Thomas Harte	32dbfe947d	With hindsight, the elimination of this might have been overzealous.	2016-11-20 10:53:35 +08:00
Thomas Harte	ef0367d4a4	Corrected typo.	2016-11-20 09:12:43 +08:00
Thomas Harte	5bc165960a	Completed refactoring.	2016-11-20 09:12:06 +08:00
Thomas Harte	fda90c5aef	Documented.	2016-11-20 09:11:24 +08:00
Thomas Harte	c2349ee3f4	This thing has clearly becoma a real class.	2016-11-19 20:12:40 +08:00
Thomas Harte	7857ef774f	Ensured resets genuinely kill outstanding data.	2016-11-19 20:09:38 +08:00
Thomas Harte	a4c7b00ecd	Fixed code that was causing the failing test.	2016-11-19 19:55:30 +08:00
Thomas Harte	f59537bce9	Added a testing hook, but as of yet no tests.	2016-11-17 14:06:16 +08:00
Thomas Harte	aca1fa0577	Returned some video output. Enough significantly to reduce my paranoia.	2016-11-17 13:37:53 +08:00
Thomas Harte	1f91d29434	Progressed to usage of an array builder and a texture builder up to the point of a successful build.	2016-11-17 12:26:04 +08:00