94 Commits

Author	SHA1	Message	Date
Thomas Harte	b5bcadb8d3	Reinstated clipped CRT output, with more appropriate ownership of the decision.	2016-02-07 22:18:55 -05:00
Thomas Harte	3a689d14cc	Added padding of supplied data to correct for any potential rounding errors when rendering.	2016-02-07 20:29:32 -05:00
Thomas Harte	3a9ea66f8b	Filled in shader class.	2016-02-07 19:21:22 -05:00
Thomas Harte	4d0a218a57	Certainly at least seriously considering a separate holder for the "compile a shader" logic. Otherwise taking steps back towards PAL/NTSC decoding.	2016-02-07 17:32:38 -05:00
Thomas Harte	602327cd9d	Sketched out a quick class for rendering to texture.	2016-02-07 15:42:02 -05:00
thomasharte	2cb12a7513	Allowed overly aggressive allocations to be cleared up after the fact.	2016-02-06 16:07:23 -05:00
Thomas Harte	bf348ccb96	Fixed clearing logic.	2016-02-05 22:47:12 -05:00
Thomas Harte	6ab425deda	There is now a semi-reasonable amount of screen output again.	2016-02-05 21:35:39 -05:00
Thomas Harte	80e7e5e602	Updated to return old behaviour of drawing only upon changes.	2016-02-04 23:05:47 -05:00
Thomas Harte	8bc3f8046d	This endeavours to move everything into the CRT class except the final version of shader building.	2016-02-04 22:57:46 -05:00
Thomas Harte	e0d51408e4	Onward with carrying this through to the bitter end, this at least results in all the appropriate knowledge and call-ins occuring at the CRT.	2016-02-04 22:28:50 -05:00
Thomas Harte	09e11469c3	Simplified further: eliminated delegate. Which means I can go frame-free internally to the CRT at some point, if I want.	2016-02-03 19:11:18 -05:00
Thomas Harte	19393390ac	It's broken now, but this is what I now intend the full public interface of the CRT to be.	2016-02-02 22:41:33 -05:00
Thomas Harte	4554abb755	Made an attempt to be more rigorous in display generation on the Electron, to make sure I deal with mid-line changes to/from blank line mode. Even if it turns out that they generate pixels.	2016-01-29 21:14:13 -05:00
Thomas Harte	adc6838ba0	Continued slow migration of shader ownership to CRT. Attempted to start debugging the tape interface.	2016-01-27 21:35:57 -05:00
Thomas Harte	1819e7b9cc	Started sketching out an appropriate interface to transfer responsibility for shaders to the CRT.	2016-01-23 19:06:32 -05:00
Thomas Harte	ace331d4b4	Got a bit higher level in CRT timing specification. Which internally allows it now to infer the colour clock frequency. Which will be helpful momentarily.	2016-01-23 18:53:20 -05:00
Thomas Harte	a9e26d7808	Introduced a scan's delay, as intended.	2016-01-23 17:49:25 -05:00
Thomas Harte	20cab08f8f	Added a two-slot buffer of scans and a comon dispatch mechanism.	2016-01-23 17:44:34 -05:00
Thomas Harte	0efe4b312c	Disabled my various bits of rate interchange debugging; improved test for when to call update_display due to a RAM write.	2016-01-21 22:16:52 -05:00
Thomas Harte	48ddd3c497	Set about documenting the CRT; while doing so decided to add an optional clock divider for input; having done so decided to try to exploit it with the Electron.	2016-01-21 21:17:47 -05:00
Thomas Harte	4c16d34063	Moved set_tape so that the inline definition of get_next_tape_pulse is visible to it. Also eliminated some dead typedefs.	2016-01-20 08:27:25 -05:00
Thomas Harte	f727582911	Started making first moves towards stripping CSCathodeRayView of its responsibilities. If that can be merely an OpenGL view that presents things, things will be a lot more portable.	2016-01-20 08:21:33 -05:00
Thomas Harte	e65cd4cf06	Some data is marginally reaching the CPU from the tape.	2016-01-19 22:05:34 -05:00
Thomas Harte	ddcc34740b	Added lots of debugging output while I attempt to locate the source of audio scratchiness, also simplified manner of dealing with wraparound within the AudioQueue wrapper.	2016-01-18 13:50:19 -06:00
Thomas Harte	b58e59e2bb	Fixed: now outputting the requested output rate, rather than massively overproducing at the input rate.	2016-01-14 23:12:40 -05:00
Thomas Harte	383b2be4c6	Fixed one off-by-one error.	2016-01-14 21:33:27 -05:00
Thomas Harte	8bd04a6be4	Switched model for filter subclasses. Implemented test square[-ish] wave to check for obvious stream errors. None is clear.	2016-01-14 21:27:02 -05:00
Thomas Harte	38ffcaa262	Here, at last, is _some_ audio output, at least.	2016-01-14 20:33:22 -05:00
Thomas Harte	afde8dac49	Closed the loop such that audio manages to bubble up into Objective-C.	2016-01-13 22:38:59 -05:00
Thomas Harte	439d452e23	Resolved some errors.	2016-01-13 22:11:33 -05:00
Thomas Harte	49e89a4bcb	I'm not yet completely convinced by my approach to time basing, but it'll probably do? If so then this more or less gets me ready for a point-sampled filtering.	2016-01-13 22:02:39 -05:00
Thomas Harte	d9a7ef9e46	Edging towards audio output; the speaker is given appropriate input and output rates, and then updated with current divider and enabled/disabled status.	2016-01-13 21:03:43 -05:00
Thomas Harte	84ba4e2900	Tidied a little, started working towards supporting speaker output.	2016-01-12 22:19:56 -05:00
Thomas Harte	3437781abd	Started sketching out an interface for sound generation. Which made me realise that the CRT in CRTDelegate was redundant, since C++ has namespaces.	2016-01-12 16:54:09 -05:00
Thomas Harte	82aa6d074a	'type' is out, at least for the time being.	2015-09-05 20:25:30 -04:00
Thomas Harte	3c3c4d2f7c	Enlarged drawing range a little.	2015-08-19 21:35:26 -04:00
Thomas Harte	28fad66272	Okay, so I had those constants transposed. What a klutz I've been!	2015-08-19 09:09:00 -04:00
Thomas Harte	f74d9ee373	Copied in quote. So that I can stop looking it up.	2015-08-18 22:36:32 -04:00
Thomas Harte	a62c7f5c56	At last! Discovered CRT scanning bug; was always moving by the full proposed run length along the scan, not the time until the next event. Using this, have implemented proper vertical sync at last (I think). Have disabled scanline banding too, as now everything meets up it's more helpful to be able to see with clarity.	2015-08-18 22:22:47 -04:00
Thomas Harte	88d5064737	Not that it makes a lot of difference, there being no names to mangle, but moved the closing #ifdef __cplusplus to the idiomatic place.	2015-08-18 20:33:59 -04:00
Thomas Harte	902795d61c	Switched vertical sync detection method, at least for now. They never happen automatically (I need to fix that) and just always take effect if detected in the lower half of the display. PAL/NTSC is determined just by looking at the refresh rate.	2015-08-18 00:17:03 -04:00
Thomas Harte	083b678785	Quickie: observed that the initial position is one scanline dirty, not zero. Also switched to a size_t on the write pointer, size_t being the correct C size for into-memory offsets.	2015-08-17 00:25:32 -04:00
Thomas Harte	cde9bb7ebc	Put common shift step into a macro.	2015-08-16 16:12:20 -04:00
Thomas Harte	a693c081f8	Switched on the appropriate compiler warnings re: signed comparisons and implicit conversions. Fixed all less-than-explicit calls.	2015-08-16 16:08:29 -04:00
Thomas Harte	b440fed323	Fixed a couple of incorrect references to horizontal constants or calculations where the intention is to use vertical.	2015-08-13 18:29:07 +01:00
Thomas Harte	59c872ada6	Attempted to reintroduce suitably noted emergency flyback. To re-enable auto-selection of PAL.	2015-08-13 14:55:53 +01:00
Thomas Harte	aebf636528	Ensured the PIA timer resumes its normal tick rate after being read; fixed those spaces that had crept in where tabs should be.	2015-08-10 16:55:16 +01:00
Thomas Harte	fd36f13baf	The cathode ray view no longer hard codes the frame size. So that's one less coupling. Doubled pixel output size to give sufficient sampling detail to capture the NTSC colour clock (ummm, hopefully).	2015-08-05 21:45:47 -04:00
Thomas Harte	67e82c713f	Broke assumption that every item in a vertex description is a short, specifically turning lateral into a byte. Which buys me a byte for phase, if that's sufficient.	2015-08-05 21:12:33 -04:00