Thomas Harte
|
d7a5c3f49a
|
Added support for the ID 20 block and fixed a minor error in my skip-the-contents version of block 11: length is three bytes long, not two. This gives me enough structure properly to get to the end of my current test CDT, albeit without making any of the noises.
|
2017-08-02 14:12:34 -04:00 |
|
Thomas Harte
|
819761f9fb
|
Fixed another uninitialised pointer.
|
2017-08-02 13:56:35 -04:00 |
|
Thomas Harte
|
9d953421d8
|
After a quick check, added a couple of other _delegate initialisations. I should probably find a way to template this.
|
2017-08-01 07:07:43 -04:00 |
|
Thomas Harte
|
4b5e9ffb83
|
Ensured is_at_end_ is initially cleared by default.
|
2017-07-27 22:22:43 -04:00 |
|
Thomas Harte
|
4abd62e62b
|
Standardises on const [Half]Cycles as the thing called and returned, rather than const [Half]Cycles & as it's explicitly defined to be only one int in size, so using a reference is overly weighty.
|
2017-07-27 22:05:29 -04:00 |
|
Thomas Harte
|
8361756dc4
|
Switched definitively to the works-for-now approach of requiring an explicit opt-in where somebody wants to clock a whole-cycle receiver from a half-cycle clock.
|
2017-07-27 07:40:02 -04:00 |
|
Thomas Harte
|
75d67ee770
|
Relocated ClockReceiver.hpp as it's a dependency for parts of the static analyser, and therefore needs to be distinct from the actual emulation parts.
|
2017-07-25 20:20:55 -04:00 |
|
Thomas Harte
|
a1e9a54765
|
Eliminated redundant uses of ClockReceiver and sought to ensure that proper run_fors are inherited all the way down.
|
2017-07-25 20:09:13 -04:00 |
|
Thomas Harte
|
8d1dacd951
|
Clean ups along the Electron::Tape line: ensured that the ClockReceiver is opted into only once, and that its run_for propagates all the way along the chain.
|
2017-07-25 20:01:30 -04:00 |
|
Thomas Harte
|
8a2bdb8d22
|
Converted the TimedEventLoop and the things that sit atop it into ClockReceivers.
|
2017-07-24 21:19:05 -04:00 |
|
Thomas Harte
|
b3ae920746
|
Converted the DPLL and disk controller classes to be ClockReceivers.
|
2017-07-24 21:04:47 -04:00 |
|
Thomas Harte
|
6633537fb8
|
Discovering that there is such a thing as P81 — a ZX81 file without the name omitted — added support for it. Extended FileHolder while I was here to retain the file name and be able to supply its extension, as my quick-fix test-the-last-character approach to o/p/80/81 discrimination stops working with p81 thrown into the mix and this feels like the correct factoring.
|
2017-07-22 16:02:25 -04:00 |
|
Thomas Harte
|
313b36944f
|
Ensured that the final bit of a tape isn't dropped even if the tape ends exactly after it, by not posting a false pulse, being less restrictive about what can cap a bit, and in any case using a long gap as the end-of-file bookend.
|
2017-07-22 15:41:33 -04:00 |
|
Thomas Harte
|
456fdda6c2
|
Ensured that the mark_end step can't overwrite another recognised symbol.
|
2017-07-22 15:40:22 -04:00 |
|
Thomas Harte
|
64865b3f41
|
Signedness fixes.
|
2017-07-21 21:23:34 -04:00 |
|
Thomas Harte
|
2d8e7e9f8b
|
Removed reference to a parameter long-since dead.
|
2017-07-21 20:46:25 -04:00 |
|
Thomas Harte
|
a026998682
|
Marginally optimised set_offset to avoid resets when possible.
|
2017-07-21 20:43:20 -04:00 |
|
Thomas Harte
|
06ea81fdb2
|
Made sure that unrecognised waves don't block the symbol queue, and allowed any type of nonsense to be skipped before finding a byte.
|
2017-07-21 20:23:26 -04:00 |
|
Thomas Harte
|
d69b1e2d11
|
Switched parsing logic to looking only for upward zero crossings, that being my new understanding of the ROM.
|
2017-07-21 19:39:38 -04:00 |
|
Thomas Harte
|
a3e0024980
|
Chopped time accumulation out of the default Tape process because it's proving to be sufficiently expensive for a TZX as not to be worthwhile. Introduced a cheaper position capturing/restoring method.
|
2017-07-21 18:55:03 -04:00 |
|
Thomas Harte
|
d9a2c32aca
|
Made an attempt to obey the proper TZX rules on gaps, and to hit the common-clock-rate Time optimisation.
|
2017-07-21 18:21:12 -04:00 |
|
Thomas Harte
|
70af075012
|
Determined what appears to be an appropriate workaround for the ZX81 TZX that I've managed to obtain.
|
2017-07-19 21:28:33 -04:00 |
|
Thomas Harte
|
c8cee88e33
|
Ensured that a stopped tape outputs a false level and took an extra safety check in instantiation.
|
2017-07-18 22:49:11 -04:00 |
|
Thomas Harte
|
35296017b5
|
Clarified meaning of is_high_ flag and ensured it is honoured properly.
|
2017-07-17 21:36:05 -04:00 |
|
Thomas Harte
|
130d598ec9
|
Corrected some minor out-of-style breaks, and ensured that the name of ZX81 files is returned.
|
2017-07-17 19:52:54 -04:00 |
|
Thomas Harte
|
0350925c1e
|
Started sketching out greater support. Mostly TODOs right now, but pulse sequence and pure tone are implemented. I probably also need at least the CSW block to hit everything you might see in a ZX80 or ZX81 tape. Then I can worry about the rest when I have a way to test them.
|
2017-07-17 19:38:15 -04:00 |
|
Thomas Harte
|
94e3dd0d4f
|
Merge branch 'master' into TZX
|
2017-07-17 19:07:05 -04:00 |
|
Thomas Harte
|
eafdd7dbd7
|
Corrected decompressed size expectations: it may be up to five times the size of the number of waves, as waves are up to five bytes in length.
|
2017-07-17 19:04:25 -04:00 |
|
Thomas Harte
|
127b584e79
|
Ensured that resetting a TZX resets the is-at-end flag.
|
2017-07-17 07:52:28 -04:00 |
|
Thomas Harte
|
2179edc7fe
|
Adjusted to allow the very first thing found to be data, and ensured that unrecognised symbols break files just as gaps do.
|
2017-07-17 07:43:47 -04:00 |
|
Thomas Harte
|
9108495586
|
Added a safety seek.
|
2017-07-17 07:35:53 -04:00 |
|
Thomas Harte
|
fa617eac6b
|
Spotted that pilot and data segments have different encodings — of course! — and attempted to adapt.
|
2017-07-17 07:34:10 -04:00 |
|
Thomas Harte
|
b63971caf7
|
Took a first, incorrect, shot at TZX chunk 0x19, the generalised data block.
|
2017-07-16 22:40:38 -04:00 |
|
Thomas Harte
|
7327da6350
|
Switched the nascent TZX to use the new PulseQueuedTape.
|
2017-07-16 22:06:56 -04:00 |
|
Thomas Harte
|
8f72fc4a44
|
Factored out from the UEF implementation the concept of being a tape that has a queue of pending pulses and manages that queue.
|
2017-07-16 22:04:40 -04:00 |
|
Thomas Harte
|
238348c885
|
Performed the initial wiring to announce that this application supports TZX files and to route them to the ZX80/81 static analyser. The TZX class itself does not yet do much beyond basic validation. I think it'll be easiest if it follows in UEF's footsteps in queuing up pulses ahead of time, so some factoring out is now required.
|
2017-07-16 21:33:11 -04:00 |
|
Thomas Harte
|
b3861ff755
|
Reduced copying of Pulses.
|
2017-07-16 19:49:31 -04:00 |
|
Thomas Harte
|
c2bc34fd87
|
Eliminated the PLLParser class. I think the proper abstraction if and when another machine requires PLL-esque parsing is probably to template out the Acorn wiring of a PLL to a Parser, and/or generalise the Acorn shifter. It'll be easier to decide when the time comes.
|
2017-07-16 19:25:26 -04:00 |
|
Thomas Harte
|
1d3ae31755
|
Abstracted the concept of an Acorn shifter away from being a PLLParser. The Acorn tape parser now skips using that class and uses the shifter. The actual Electron also uses the shifter. So the two are completely aligned. Net result: the Electron should successfully load exactly when static analysis was successful.
|
2017-07-16 19:24:01 -04:00 |
|
Thomas Harte
|
e5188a60dc
|
Settled on the new average-of-length approach to a PLL window sizing, eliminating the old errors-of-phase approach. Since it anchors automatically to the original target clocks per bit, killed the explicit mention of a tolerance.
|
2017-07-16 19:03:50 -04:00 |
|
Thomas Harte
|
e71d13c090
|
With the new PLL implementation, switching to a deeper window size returns the Acorn tape parser to: working.
|
2017-07-16 17:12:12 -04:00 |
|
Thomas Harte
|
c8575fe6e0
|
Mild clean ups, and a tweak to permitted top and bottom phase.
|
2017-07-16 13:39:08 -04:00 |
|
Thomas Harte
|
253f9603ed
|
Split the normal tape parser class into two in order to add a new option: a PLL-driven tape parser. Decided to see what happens if I attempt to use that to parse CSW Acorn data.
|
2017-07-15 19:07:35 -04:00 |
|
Thomas Harte
|
b743566339
|
Corrected under-request of data: was erroneously supplying the size of input as the expected size of output.
|
2017-07-15 15:19:03 -04:00 |
|
Thomas Harte
|
648618d280
|
Tweaked bit timing decision.
|
2017-07-13 21:26:05 -04:00 |
|
Thomas Harte
|
ae1a130843
|
Fixed: length of 0 is a special case.
|
2017-07-13 20:57:27 -04:00 |
|
Thomas Harte
|
f09fe30af5
|
Attempted a full implementation of CSW. All in memory for now.
|
2017-07-12 21:23:59 -04:00 |
|
Thomas Harte
|
33eadb5549
|
Started taking further steps towards CSW support; reading the ZLib documentation is next.
|
2017-07-11 22:41:10 -04:00 |
|
Thomas Harte
|
368bff1a82
|
Added a shell class that will one day be able to parse CSW files, plus the logic and metadata to instantiate it when a CSW presents itself.
|
2017-07-10 21:43:58 -04:00 |
|
Thomas Harte
|
bcb7c27cc4
|
Given that I'm not racing this any more, turned the intended 1 second back into 1 second.
|
2017-07-08 19:21:33 -04:00 |
|