Thomas Harte
|
95a6b0f85c
|
Introduced an NMI/wait interrupt timing test, and adjusted the Z80 to conform to information posted by Wilf Rigter.
|
2017-06-22 21:09:26 -04:00 |
|
Thomas Harte
|
644ef13acd
|
Connected up the fast-tape GUI option for the ZX80 and '81.
|
2017-06-22 20:20:31 -04:00 |
|
Thomas Harte
|
0e0ce379b4
|
Renamed MachineCycle to PartialMachineCycle given that it mostly no longer intends to describe an entire machine cycle.
|
2017-06-21 20:38:08 -04:00 |
|
Thomas Harte
|
36e8a11505
|
Sought to simplify the way partial machine cycles are communicated, for ease of machine implementation. Also implemented the wait line.
|
2017-06-21 20:32:08 -04:00 |
|
Thomas Harte
|
108da64562
|
Fixed LD H, (HL) and LD L, (HL) by ensuring that whatever the subclass does goes to a temporary place before updating the address. Corrected the LD (IX+d), n machine cycle test for my new best-guess timing. This should leave only interrupt timing as currently amiss.
|
2017-06-20 22:25:00 -04:00 |
|
Thomas Harte
|
184b371649
|
Attempted to get to 'proper' timing for LD (IX+d),n, albeit that proper is a guess.
|
2017-06-20 21:48:50 -04:00 |
|
Thomas Harte
|
27ac342928
|
Corrected conditional call timing, and its test.
|
2017-06-20 20:57:23 -04:00 |
|
Thomas Harte
|
6752f165db
|
Added failing tests for both kinds of CALL.
|
2017-06-19 22:03:29 -04:00 |
|
Thomas Harte
|
e05076b258
|
Added tests for everything except CALL. All passing.
|
2017-06-19 22:00:04 -04:00 |
|
Thomas Harte
|
fadbfdf801
|
Added DJNZ test.
|
2017-06-19 21:31:56 -04:00 |
|
Thomas Harte
|
cb277b8d1e
|
Added JP and JR tests.
|
2017-06-19 21:27:23 -04:00 |
|
Thomas Harte
|
234f14dbbe
|
Tests were at fault; all passing now.
|
2017-06-19 21:14:40 -04:00 |
|
Thomas Harte
|
99ede3a9ef
|
BIT/SET (IX+d) were incorrectly encoded. Hence fixed BIT (IX+d).
|
2017-06-19 21:04:14 -04:00 |
|
Thomas Harte
|
378233f53d
|
Extended to BITs and SETs, accruing three new failures.
|
2017-06-19 21:01:30 -04:00 |
|
Thomas Harte
|
f903408980
|
Caught up on comments.
|
2017-06-19 20:53:22 -04:00 |
|
Thomas Harte
|
b684254908
|
Introduced further tests down to a failing attempt at RLC (IX+d). Made an initial attempt to fix, failed.
|
2017-06-19 20:33:34 -04:00 |
|
Thomas Harte
|
351d90ca55
|
Added tests down to INC IX. No additional failures yet, though I've yet to reach conditional CALL.
|
2017-06-19 20:04:55 -04:00 |
|
Thomas Harte
|
23177df26a
|
Added various tests of the basic ALU ops.
|
2017-06-19 19:53:26 -04:00 |
|
Thomas Harte
|
ba15371948
|
Introduced timing tests for LDI[R] and CPI[R], fixing a latent issue in the rejig of LD BC, nn while I'm here.
|
2017-06-19 19:47:00 -04:00 |
|
Thomas Harte
|
8d60734737
|
Added tests for EXX, EX (SP), HL and EX (SP), IX. The latter two currently being incorrect.
|
2017-06-19 19:17:54 -04:00 |
|
Thomas Harte
|
002098d496
|
The final two tests were at fault — expecting POPs to write rather than read. Fixed, so the subset of timing tests as-yet implemented now passes. Which means it's time to slog through further tests.
|
2017-06-19 07:45:41 -04:00 |
|
Thomas Harte
|
85c5c4405a
|
Ensured that wait states don't appear unless requested (TODO: requesting), and made the output of my timing tests a little easier to parse.
|
2017-06-19 07:30:01 -04:00 |
|
Thomas Harte
|
d668879ba6
|
Started trying to wade back to passing tests. Working on the new timing tests first, and focussing on getting the Objective-C test machine to compile bus operations into machine cycles, which means indicating phase to all-RAM delegates.
|
2017-06-18 22:03:13 -04:00 |
|
Thomas Harte
|
e1a2580b2a
|
Renamed BusOperation to MachineCycle::Operation.
|
2017-06-17 21:53:45 -04:00 |
|
Thomas Harte
|
b6f51474ff
|
Ensured that -description can handle the newly-captured bus actions.
|
2017-06-17 18:20:30 -04:00 |
|
Thomas Harte
|
0f18768091
|
Disabled attempts at bus activity matching within the FUSE tests, at least until I settle on exactly what I intend to do.
|
2017-06-17 18:19:25 -04:00 |
|
Thomas Harte
|
50cd617bd9
|
Ensured test raises only the intentional failure exceptions.
|
2017-06-15 22:33:46 -04:00 |
|
Thomas Harte
|
838b818cd3
|
Finished transcribing first page of machine cycle documentation; several failures contained.
|
2017-06-15 22:19:49 -04:00 |
|
Thomas Harte
|
cf795562bf
|
Continued filling in tests, fleshing out what the test machine captures as a result.
|
2017-06-15 20:59:59 -04:00 |
|
Thomas Harte
|
ac37424878
|
Set up a test class to allow me to discover which of the machine cycle sequences I'm in error on.
|
2017-06-15 19:06:59 -04:00 |
|
Thomas Harte
|
aed2827e7b
|
Implemented a rudimentary way to test that instructions take as long as the FUSE tests think they should. Hence discovered that the (HL)-accessing BIT, RES and SET weren't. Corrected.
|
2017-06-12 22:22:00 -04:00 |
|
Thomas Harte
|
a48616a138
|
Fixed reference to Swift-world MachineDocument for the ZX81 file type.
|
2017-06-12 18:51:11 -04:00 |
|
Thomas Harte
|
8222aac9e3
|
Added an official declaration of support for ZX81 files.
|
2017-06-11 21:40:41 -04:00 |
|
Thomas Harte
|
77aa3c187e
|
Rebranded ZX80O as ZX80O81P, with an eye to making it accept ZX81 .p files. Adjusted the initial selection part of the static analyser appropriately.
|
2017-06-11 21:38:32 -04:00 |
|
Thomas Harte
|
8116f85479
|
Allowed the static analyser to specify a ZX80 or 81, and a memory model. Neither is respected yet in the machine.
|
2017-06-11 19:12:20 -04:00 |
|
Thomas Harte
|
50be3a24fe
|
Sought to ensure that Mode 1 interrupts aren't happening early. Which they seem not to be.
|
2017-06-11 13:30:08 -04:00 |
|
Thomas Harte
|
7e10c7f9d8
|
Relocated the ZX80/81 concept of a 'file' out from Tape into Data, given that it's an exact duplicate of memory.
|
2017-06-08 19:09:51 -04:00 |
|
Thomas Harte
|
60300851ea
|
Started sketching out a tape parser for ZX80 and '81 files. I think this'll help me to verify whether the .O input is working.
|
2017-06-07 10:12:13 -04:00 |
|
Thomas Harte
|
8c66e1d99d
|
Factored out ZX80/81 video and rejigged to ensure it will keep ticking over irrespective of whether the machine is supplying data.
|
2017-06-06 17:53:23 -04:00 |
|
Thomas Harte
|
cc4cb45e9d
|
Implemented keyboard input and ensured that the signal generated is marked as composite, putting the colour-suppression ball into the CRT's court.
|
2017-06-06 09:25:18 -04:00 |
|
Thomas Harte
|
c485c460f7
|
Imported the ZX80 and 81 system ROMs (though not publicly), added enough code to post their contents into C++ world.
|
2017-06-04 18:08:35 -04:00 |
|
Thomas Harte
|
b0a7c58287
|
Fixed project to point to the XIB I actually want to keep; fixed that XIB to have the correct contents.
|
2017-06-04 17:57:37 -04:00 |
|
Thomas Harte
|
d2637123c4
|
Added necessary support to get as far as an empty window when attempting to load a piece of ZX80 software.
|
2017-06-04 17:55:19 -04:00 |
|
Thomas Harte
|
02b7c3d1b0
|
Added the necessary wiring to get into a ZX80/81-oriented part of the static analyser, which could in principle post a ZX80 target.
|
2017-06-04 17:04:06 -04:00 |
|
Thomas Harte
|
8c1769f157
|
Made a quick attempt at serialising from ZX80 .O to waves.
|
2017-06-04 16:59:26 -04:00 |
|
Thomas Harte
|
655809517c
|
Ensured that there is a subclass of file that is entrusted to load .O/.80 files, and that the code routes such files to it, noting that it should consider whether a ZX80 is required.
|
2017-06-04 16:37:03 -04:00 |
|
Thomas Harte
|
2190f60a89
|
Reinstated manual-by-stealth secondary usage of the Zexall test as a benchmarking tool.
|
2017-06-04 15:46:35 -04:00 |
|
Thomas Harte
|
0eebfdb4cc
|
Expanded emulation of memptr, though still incomplete. Reverted zexall tests to zexdoc. Will probably leave memptr until I've an emulated machine as test suites seem to exist, but they're machine-dependant, so figuring out how to isolate them from an architecture will be a lot easier if and when I have functioning machines.
|
2017-06-04 15:39:37 -04:00 |
|
Thomas Harte
|
7811374b0f
|
Started sneaking in memptr emulation, hopefully to get to a working BIT (hl).
|
2017-06-04 15:07:07 -04:00 |
|
Thomas Harte
|
87095b0578
|
Undid consciously discard for bits 3 and 5 in the FUSE tests. Back to 100 failures.
|
2017-06-04 14:04:26 -04:00 |
|
Thomas Harte
|
b642d9f712
|
Eliminates the 6502's specialised jam handler in favour of the generic trap handler, and simplifies the lookup costs of that as it's otherwise doubling execution costs.
|
2017-06-03 21:54:42 -04:00 |
|
Thomas Harte
|
fd6623b5a5
|
Attempted to bring a common hierarchy to the Z80 and 6502 test machines, particularly with a view to eliminating the special-case Jam stuff on the 6502.
|
2017-06-03 21:22:16 -04:00 |
|
Thomas Harte
|
b304c3a4b9
|
Eliminated the 6502's reliance on the micro-op scheduler.
|
2017-06-03 20:30:07 -04:00 |
|
Thomas Harte
|
b3da16911f
|
Tweaked timing of mode 0, per contradictory information. Wrote a failing test of mode 2.
|
2017-06-03 18:42:54 -04:00 |
|
Thomas Harte
|
e52892f75b
|
Added a test of interrupt mode 1.
|
2017-06-03 18:16:13 -04:00 |
|
Thomas Harte
|
8c41a0f0ed
|
Added a test to confirm interrupts are disabled, and a response to the interrupt cycle within the all-RAM machine.
|
2017-06-03 17:53:44 -04:00 |
|
Thomas Harte
|
3e9212aaff
|
Plumbed through to allow interrupt tests, wrote an NMI test, corrected the error revealed.
|
2017-06-03 17:41:45 -04:00 |
|
Thomas Harte
|
d14902700a
|
Minor syntax and wiring fixes.
|
2017-06-01 22:33:05 -04:00 |
|
Thomas Harte
|
c95c32a9fe
|
Implemented the reset line program and disabled fictitious automatic power-on reset for the Z80 test machine.
|
2017-06-01 22:31:04 -04:00 |
|
Thomas Harte
|
494ce073b5
|
Tests having been fixed by instating proper Z80 cycle counting, removed caveman logging.
|
2017-05-31 19:58:57 -04:00 |
|
Thomas Harte
|
5ff73faf48
|
Ensured Zexall can pass.
|
2017-05-31 19:55:06 -04:00 |
|
Thomas Harte
|
2f7f11e2e5
|
Added diagnosis props.
|
2017-05-31 06:54:25 -04:00 |
|
Thomas Harte
|
5119997122
|
Made an attempt, flawed so far, to find a neat way for processor subclasses to offer bus management as an inline function.
|
2017-05-30 22:41:23 -04:00 |
|
Thomas Harte
|
7bddd294c9
|
Resolved an unpredictable conditional and temporarily disabled the Zexalltest as part of the default suite, since it takes so long to run.
|
2017-05-30 21:03:02 -04:00 |
|
Thomas Harte
|
244b5ba3c2
|
Added a proper termination condition for Zexall and, for now, a Mhz counter.
|
2017-05-30 18:32:38 -04:00 |
|
Thomas Harte
|
960de7bd7b
|
Marginally reduced test machine costs based on usage.
|
2017-05-30 11:59:07 -04:00 |
|
Thomas Harte
|
c6185baa99
|
Fixed R incrementation and attempted to make the status flags cheaper to write to.
|
2017-05-29 22:23:19 -04:00 |
|
Thomas Harte
|
4d4695032c
|
Discovered that Zexall is just really slow. Disabled the address sanitiser, and started working towards a verifiable end.
|
2017-05-29 21:46:00 -04:00 |
|
Thomas Harte
|
6d22f6fcd5
|
Having decided the bus operation error on 10 is probably in the test cases, decided to allow myself to skip that one comparison. Back to zero failing cases, and with no more useful information to derive from the FUSE test set for the time being.
|
2017-05-29 17:17:17 -04:00 |
|
Thomas Harte
|
8bfaa487ce
|
Improved logging of bus operations and corrected placement of the OUT step in that repetition group; was otherwise outputting the wrong side of the B adjustment and therefore to the wrong port (if interpreted as 16 bit).
|
2017-05-29 17:13:24 -04:00 |
|
Thomas Harte
|
267b2add9a
|
Adjusted for where FUSE nominally places timestamps. Down to 92 failures.
|
2017-05-29 16:44:07 -04:00 |
|
Thomas Harte
|
d290e3d99e
|
Corrected simple logging error. Which mysteriously moves me all the way up to 117 failures (!)
|
2017-05-29 16:35:00 -04:00 |
|
Thomas Harte
|
a6a4c5a936
|
Made an attempt to introduce checking of bus activity against the FUSE tests. Appears to suggest 54 new failures.
|
2017-05-29 15:57:27 -04:00 |
|
Thomas Harte
|
ed7b07c8b1
|
Made an attempt to implement HALT as an operation that merely leaves the PC in place, adding the Z80's output line. Included that flag in FUSE tests. Discovered that it does not think that HALT acts that way. Which is probably correct.
|
2017-05-29 11:54:27 -04:00 |
|
Thomas Harte
|
d83dd17738
|
[DD/FD]36 turns out to be a timing error: offset calculation overlaps with value fetch. So the FUSE test was cutting off my implementation early. Fixed.
|
2017-05-29 11:40:56 -04:00 |
|
Thomas Harte
|
9ade0dcae3
|
One failure was just PUSH AF due to throwing away the 5 & 3 flags at the start. Switched to throwing them away at comparison.
|
2017-05-29 11:06:23 -04:00 |
|
Thomas Harte
|
a329d85697
|
Instituted memory value checks, flushing out seven new failures.
|
2017-05-29 11:01:45 -04:00 |
|
Thomas Harte
|
c322410783
|
Corrected CP[I/D]R termination logic; all tests now passing to the extent of interrogation.
|
2017-05-29 10:52:54 -04:00 |
|
Thomas Harte
|
b67331e018
|
Fixing the OUT repetition group reduces the code to one failing test.
|
2017-05-29 10:48:53 -04:00 |
|
Thomas Harte
|
ad56a9215c
|
Implemented IN[I/D]x. 18 failures remaining.
|
2017-05-29 10:12:33 -04:00 |
|
Thomas Harte
|
c56a5344b9
|
Implemented CP[I/D]x.
|
2017-05-29 08:54:00 -04:00 |
|
Thomas Harte
|
409c82ce73
|
Implemented RLD and RRD. 34 failures remaining.
|
2017-05-28 16:46:27 -04:00 |
|
Thomas Harte
|
6e83b7d6df
|
Attempted to add a proper exit condition for Zexall.
|
2017-05-28 15:13:47 -04:00 |
|
Thomas Harte
|
5a4d448cc1
|
Corrected logical flags; now down to 68 failures, all of them on the ED page.
|
2017-05-28 15:09:58 -04:00 |
|
Thomas Harte
|
6b66c8f304
|
Implemented inputs and outputs, determined how to answer port requests to please FUSE and hence reduced failures to 84.
|
2017-05-28 14:50:51 -04:00 |
|
Thomas Harte
|
035df316aa
|
FUSE seems to have inconsistent ideas about where b3 and b5 come from in more-complicated BIT instructions. So I'm not testing them for now. Within that reality, reduced to 102 failures.
|
2017-05-27 23:54:53 -04:00 |
|
Thomas Harte
|
c7cb47a1d8
|
Readded and then disabled my temporary one-test-only patch. Failures are currently at 237.
|
2017-05-27 21:10:25 -04:00 |
|
Thomas Harte
|
98423c6e41
|
Accepted FUSE's view of bits 3 & 5 from BIT and RES, reducing to 623 issues.
|
2017-05-27 16:19:15 -04:00 |
|
Thomas Harte
|
33c3fa21e3
|
Fixed (HL)/(In + d) CB page modify instructions. Reducing failures to 672.
|
2017-05-27 15:54:24 -04:00 |
|
Thomas Harte
|
9bc2b48d9b
|
Found a form I like for indexed addressing, applying it only where obvious for now. Which eliminates more than a couple of hundred of remaining failures.
|
2017-05-26 23:23:33 -04:00 |
|
Thomas Harte
|
e4e71a1e5f
|
Switched back to descriptive failures, but put a cap on them.
|
2017-05-25 21:08:24 -04:00 |
|
Thomas Harte
|
fba5af280e
|
Shortened failure message, at least for now.
|
2017-05-25 21:05:47 -04:00 |
|
Thomas Harte
|
2cadc706e2
|
Now runs FUSE tests, albeit testing only a subset of the results. But enough to get started.
|
2017-05-25 21:00:33 -04:00 |
|
Thomas Harte
|
3c6f63abcc
|
Started towards running the FUSE tests. Just need to deal with the memory segments.
|
2017-05-25 19:12:59 -04:00 |
|
Thomas Harte
|
00cd7e7e9c
|
After hitting my head against the wall of trying to use [NS]Scanner as a parser some more, have given up and transcoded the two tests files to JSON.
|
2017-05-25 18:20:13 -04:00 |
|
Thomas Harte
|
055c860b43
|
Sealed off RegisterState as immutable, and started trying to parse the .expected file.
|
2017-05-23 22:32:36 -04:00 |
|
Thomas Harte
|
454c8628c3
|
Implemented an additional constructor for RegisterStates, pulling it out into file-level scope and implementing Equatable.
|
2017-05-23 22:05:33 -04:00 |
|
Thomas Harte
|
a23a6db4d6
|
Tidied up, creating a holder for RegisterState and giving it deserialisation logic. This makes sense because a register state will also need to be taken from the outputScanner, and from the machine.
|
2017-05-23 08:13:24 -04:00 |
|
Thomas Harte
|
6575091a78
|
Fixed Z80's ownership of its fetch-decode-execute program, its habit of scheduling invalidly when hitting an unrecognised operation and the test machine's habit of dereferencing invalidly.
|
2017-05-22 21:50:34 -04:00 |
|
Thomas Harte
|
9e25d014d2
|
Made an attempt to log bus activity for comparison with FUSE results.
|
2017-05-22 19:49:38 -04:00 |
|
Thomas Harte
|
41d5dd8679
|
Added a memory access delegate to the Z80 all-ram processor, to allow access patterns to be captured.
|
2017-05-22 19:24:11 -04:00 |
|
Thomas Harte
|
22afa509ca
|
Got to a parsing and towards an attempt to run FUSE tests.
|
2017-05-22 19:14:46 -04:00 |
|
Thomas Harte
|
3fb3cc8269
|
Got explicit about encodings.
|
2017-05-21 22:53:06 -04:00 |
|
Thomas Harte
|
e3e461d7cb
|
Added a test class for running the FUSE tests. With nothing much in it.
|
2017-05-21 22:49:24 -04:00 |
|
Thomas Harte
|
c16fccb317
|
Fixed file names.
|
2017-05-21 22:43:07 -04:00 |
|
Thomas Harte
|
b9cffdf2bd
|
Imported the FUSE tests.
|
2017-05-21 22:42:20 -04:00 |
|
Thomas Harte
|
01a064dd63
|
Added an empty ED page.
|
2017-05-20 17:29:30 -04:00 |
|
Thomas Harte
|
d910405648
|
Added enough infrastructure to be able to react to the two CP/M calls this cares about.
|
2017-05-19 21:53:39 -04:00 |
|
Thomas Harte
|
62b432c046
|
Added the concept of a trap handler to the all-RAM processor and exposed it via the test Z80 classes.
|
2017-05-19 21:20:28 -04:00 |
|
Thomas Harte
|
11d05fb3b8
|
Expanded a little on operations, added an implementation or two.
|
2017-05-19 19:18:35 -04:00 |
|
Thomas Harte
|
58efca835f
|
Sought to add a further opcode.
|
2017-05-18 22:53:43 -04:00 |
|
Thomas Harte
|
da6e520b91
|
Merge branch 'master' into Z80
|
2017-05-18 22:30:51 -04:00 |
|
Thomas Harte
|
9398b6c2c8
|
Unable to differentiate, decided to map a Mac shift key to both Oric shifts.
|
2017-05-18 22:25:59 -04:00 |
|
Thomas Harte
|
a3dafa9056
|
Abbreviated uses of enumerations.
|
2017-05-17 21:44:08 -04:00 |
|
Thomas Harte
|
64d6ee1be5
|
Adjusted slightly to adapt to latest Swift warnings.
|
2017-05-17 07:49:48 -04:00 |
|
Thomas Harte
|
1378ab7278
|
Ensured initial program counter and stack pointer are correct for Zexall, fixed the Z80 to use a compile-time polymorphic call for bus access.
|
2017-05-17 07:36:06 -04:00 |
|
Thomas Harte
|
87a021ec2d
|
Made further attempt to get as fas as having the Z80 attempt to do something.
|
2017-05-16 22:19:40 -04:00 |
|
Thomas Harte
|
189317b80c
|
Added enough of a Z80 test machine to bridge up into Swift.
|
2017-05-16 22:05:42 -04:00 |
|
Thomas Harte
|
4f0775cc7c
|
Imported the Zexall.com tester, as a first thing to throw at the Z80 to be.
|
2017-05-16 21:37:09 -04:00 |
|
Thomas Harte
|
7190f927b7
|
Factored out the stuff that both all-RAM processors would share, rather than duplicating it.
|
2017-05-16 21:28:17 -04:00 |
|
Thomas Harte
|
d559d8b901
|
Continued edging towards getting the absolute basics of a testable Z80, for test-driven development. Corrected old-fashioned instance naming issues with the corresponding 6502 class and removed an unnecessary source file while at it.
|
2017-05-16 21:19:17 -04:00 |
|
Thomas Harte
|
df80c37adb
|
Renamed TestMachine to TestMachine6502 since there's going to be multiple of them.
|
2017-05-15 08:18:57 -04:00 |
|
Thomas Harte
|
0808e9b6fb
|
Pulled the 6502 into a CPU namespace, making it an instance of something that has micro-opcodes and schedules them, and factoring out the formulation of a register pair.
|
2017-05-14 22:08:15 -04:00 |
|
Thomas Harte
|
b81a2cc273
|
First tentative steps towards adding a Z80 implementation.
|
2017-05-14 17:46:41 -04:00 |
|
Thomas Harte
|
8e35e913bb
|
Formally withdrew the 'load automatically' option for the Vic, having removed that option elsewhere.
|
2017-05-14 16:59:24 -04:00 |
|
Thomas Harte
|
2edf73908c
|
Temporarily disabled the existing fast loading implementation in pursuit of another, and started trying to correct the lack of connection between the userport VIA and the tape drive.
|
2017-05-06 22:00:12 -04:00 |
|
Thomas Harte
|
92a8b68859
|
Dumped Mach-specific test-and-set in favour of ordinary C11.
|
2017-04-15 21:41:59 -04:00 |
|
Thomas Harte
|
bdd432fe1d
|
Added an ugly workaround for the empirical sound shutdown issues.
|
2017-03-26 20:28:04 -04:00 |
|
Thomas Harte
|
e01f3f06c8
|
Completed curly bracket movement.
|
2017-03-26 14:34:47 -04:00 |
|
Thomas Harte
|
031a68000a
|
Added a class to contain the Pitfall 2 pager and a skeleton of initial work.
|
2017-03-18 22:08:47 -04:00 |
|
Thomas Harte
|
c3d82f88a5
|
Tidied up and commented on the Activision stack implementation.
|
2017-03-18 21:01:58 -04:00 |
|
Thomas Harte
|
c033bad0b9
|
Here's MNetwork!
|
2017-03-18 20:51:49 -04:00 |
|
Thomas Harte
|
c31d85f820
|
Re-emplaced the MegaBoy. Also cut detritus from the main Atari header.
|
2017-03-18 19:02:34 -04:00 |
|
Thomas Harte
|
217fbf257e
|
CBS RAM Plus returns.
|
2017-03-18 18:56:20 -04:00 |
|
Thomas Harte
|
0b611a14b9
|
Tigervision paging returns.
|
2017-03-18 18:50:13 -04:00 |
|
Thomas Harte
|
df6861c9dc
|
Parker Bros paging is back.
|
2017-03-18 18:21:01 -04:00 |
|
Thomas Harte
|
a4cd12394e
|
Reinstated the Activision stack pager.
|
2017-03-18 18:03:48 -04:00 |
|
Thomas Harte
|
bb3daaa99b
|
Sought to reintroduce the Atari 8k paging scheme, at the same time deciding to do away with the copy and paste of holding on to ROM data.
|
2017-03-18 15:04:01 -04:00 |
|
Thomas Harte
|
14a76af0d3
|
Started trying to float out bus control to cartridges.
|
2017-03-17 20:28:07 -04:00 |
|
Thomas Harte
|
a6897ebde0
|
Added an attempt to distinguish the MegaBoy (now with proper capitalisation) and a test for it.
|
2017-03-13 20:43:12 -04:00 |
|
Thomas Harte
|
582da14a14
|
Added an enumerated type and detection of Pitfall 2.
|
2017-03-13 08:15:36 -04:00 |
|
Thomas Harte
|
8e147444d5
|
Added a readme, as is traditional for folders I'm excluding from Git.
|
2017-03-12 22:16:12 -04:00 |
|
Thomas Harte
|
2c07cce282
|
Had the wrong paging scheme listed for Robot Tank and Thwocker. Better to get this right before trying to come up with a test for the Activision stack scheme.
|
2017-03-12 21:03:10 -04:00 |
|
Thomas Harte
|
597bd97b01
|
Corrected two more table errors.
|
2017-03-12 15:46:25 -04:00 |
|
Thomas Harte
|
38de5300e5
|
Elevator Action seemingly uses a Super Chip.
|
2017-03-12 15:43:42 -04:00 |
|
Thomas Harte
|
146f3ea0f5
|
Fixed: Crystal Castles is 16kb.
|
2017-03-12 15:39:07 -04:00 |
|
Thomas Harte
|
78213f1e95
|
Fixed a couple more table entries, introduced per-size tests (plus a catch-all), to speed up the development/testing cycle.
|
2017-03-12 15:35:36 -04:00 |
|
Thomas Harte
|
de347ad7c8
|
Improved CBS RAM Plus and Super Chip detection exclusion, reducing error count to 15.
|
2017-03-12 14:03:17 -04:00 |
|
Thomas Harte
|
a4bba8a92e
|
Made a couple of lookup table fixes and corrected RAM region detection windows; failures now down to 19.
|
2017-03-11 23:18:30 -05:00 |
|
Thomas Harte
|
fcacfc2726
|
Tidied up spacing, slightly.
|
2017-03-11 23:01:42 -05:00 |
|