6502/CLK
1
0
Fork 0
mirror of https://github.com/TomHarte/CLK.git synced 2024-07-09 06:29:33 +00:00
Code Issues Projects Releases Wiki Activity
3c6adc1ff4
CLK/Processors/65816/Implementation/65816Implementation.hpp

957 lines
24 KiB
C++
Raw Blame History

//
// 65816Implementation.hpp
// Clock Signal
//
// Created by Thomas Harte on 27/09/2020.
// Copyright © 2020 Thomas Harte. All rights reserved.
//
template <typename BusHandler> void Processor<BusHandler>::run_for(const Cycles cycles) {
// Temporary storage for the next bus cycle.
uint32_t bus_address = 0;
uint8_t *bus_value = nullptr;
uint8_t throwaway = 0;
BusOperation bus_operation = BusOperation::None;
#define perform_bus(address, value, operation) \
bus_address = address; \
bus_value = value; \
bus_operation = operation
#define read(address, value) perform_bus(address, value, MOS6502Esque::Read)
#define write(address, value) perform_bus(address, value, MOS6502Esque::Write)
#define m_flag() mx_flags_[0]
#define x_flag() mx_flags_[1]
#define x() (x_.full & x_masks_[1])
#define y() (y_.full & x_masks_[1])
#define stack_address() ((s_.full & e_masks_[1]) | (0x0100 & e_masks_[0]))
Cycles number_of_cycles = cycles + cycles_left_to_run_;
while(number_of_cycles > Cycles(0)) {
const MicroOp operation = *next_op_;
++next_op_;
#ifndef NDEBUG
// As a sanity check.
bus_value = nullptr;
#endif
switch(operation) {
//
// Scheduling.
//
case OperationMoveToNextProgram: {
// The exception program will determine the appropriate way to respond
// based on the pending exception if one exists; otherwise just do a
// standard fetch-decode-execute.
const auto offset = instructions[selected_exceptions_ ? size_t(OperationSlot::Exception) : size_t(OperationSlot::FetchDecodeExecute)].program_offsets[0];
next_op_ = &micro_ops_[offset];
instruction_buffer_.clear();
data_buffer_.clear();
last_operation_pc_ = pc_;
} continue;
case OperationDecode: {
active_instruction_ = &instructions[instruction_buffer_.value];
const auto size_flag = mx_flags_[active_instruction_->size_field];
next_op_ = &micro_ops_[active_instruction_->program_offsets[size_flag]];
instruction_buffer_.clear();
} continue;
//
// PC fetches.
//
case CycleFetchIncrementPC:
read(pc_ | program_bank_, instruction_buffer_.next_input());
++pc_;
break;
case CycleFetchOpcode:
perform_bus(pc_ | program_bank_, instruction_buffer_.next_input(), MOS6502Esque::ReadOpcode);
++pc_;
break;
case CycleFetchPC:
read(pc_ | program_bank_, instruction_buffer_.next_input());
break;
case CycleFetchPCThrowaway:
read(pc_ | program_bank_, &throwaway);
break;
//
// Data fetches and stores.
//
#define increment_data_address() data_address_ = (data_address_ & ~data_address_increment_mask_) + ((data_address_ + 1) & data_address_increment_mask_)
#define decrement_data_address() data_address_ = (data_address_ & ~data_address_increment_mask_) + ((data_address_ - 1) & data_address_increment_mask_)
case CycleFetchData:
read(data_address_, data_buffer_.next_input());
break;
case CycleFetchDataThrowaway:
read(data_address_, &throwaway);
break;
case CycleFetchIncorrectDataAddress:
read(incorrect_data_address_, &throwaway);
break;
case CycleFetchIncrementData:
read(data_address_, data_buffer_.next_input());
increment_data_address();
break;
case CycleStoreData:
write(data_address_, data_buffer_.next_output());
break;
case CycleStoreDataThrowaway:
write(data_address_, data_buffer_.preview_output());
break;
case CycleStoreIncrementData:
write(data_address_, data_buffer_.next_output());
increment_data_address();
break;
case CycleStoreDecrementData:
write(data_address_, data_buffer_.next_output_descending());
decrement_data_address();
break;
case CycleFetchBlockX:
read(((instruction_buffer_.value & 0xff00) << 8) | x(), data_buffer_.any_byte());
break;
case CycleFetchBlockY:
read(((instruction_buffer_.value & 0xff00) << 8) | y(), &throwaway);
break;
case CycleStoreBlockY:
write(((instruction_buffer_.value & 0xff00) << 8) | x(), data_buffer_.any_byte());
break;
#undef increment_data_address
#undef decrement_data_address
//
// Stack accesses.
//
#define stack_access(value, operation) \
bus_address = stack_address(); \
bus_value = value; \
bus_operation = operation;
case CyclePush:
stack_access(data_buffer_.next_output_descending(), MOS6502Esque::Write);
--s_.full;
break;
case CyclePullIfNotEmulation:
if(emulation_flag_) {
continue;
}
[[fallthrough]];
case CyclePull:
++s_.full;
stack_access(data_buffer_.next_input(), MOS6502Esque::Read);
break;
case CycleAccessStack:
stack_access(&throwaway, MOS6502Esque::Read);
break;
#undef stack_access
//
// STP and WAI.
//
case CycleRepeatingNone:
if(pending_exceptions_ & required_exceptions_) {
continue;
} else {
--next_op_;
perform_bus(0xffffff, nullptr, MOS6502Esque::None);
}
break;
//
// Data movement.
//
case OperationCopyPCToData:
data_buffer_.size = 2;
data_buffer_.value = pc_;
continue;
case OperationCopyInstructionToData:
data_buffer_ = instruction_buffer_;
continue;
case OperationCopyDataToInstruction:
instruction_buffer_ = data_buffer_;
data_buffer_.clear();
continue;
case OperationCopyAToData:
data_buffer_.value = a_.full & m_masks_[1];
data_buffer_.size = 2 - m_flag();
continue;
case OperationCopyDataToA:
a_.full = (a_.full & m_masks_[0]) + (data_buffer_.value & m_masks_[1]);
continue;
case OperationCopyPBRToData:
data_buffer_.size = 1;
data_buffer_.value = program_bank_ >> 16;
continue;
case OperationCopyDataToPC:
pc_ = uint16_t(data_buffer_.value);
continue;
//
// Address construction.
//
case OperationConstructAbsolute:
data_address_ = instruction_buffer_.value + data_bank_;
data_address_increment_mask_ = 0xff'ff'ff;
continue;
case OperationConstructAbsolute16:
data_address_ = instruction_buffer_.value;
data_address_increment_mask_ = 0x00'ff'ff;
continue;
case OperationConstructAbsoluteLong:
data_address_ = instruction_buffer_.value;
data_address_increment_mask_ = 0xff'ff'ff;
continue;
// Used for JMP and JSR (absolute, x).
case OperationConstructAbsoluteIndexedIndirect:
data_address_ = program_bank_ + ((instruction_buffer_.value + x()) & 0xffff);
data_address_increment_mask_ = 0x00'ff'ff;
continue;
case OperationConstructAbsoluteLongX:
data_address_ = instruction_buffer_.value + x();
data_address_increment_mask_ = 0xff'ff'ff;
continue;
case OperationConstructAbsoluteXRead:
case OperationConstructAbsoluteX:
data_address_ = instruction_buffer_.value + x() + data_bank_;
incorrect_data_address_ = (data_address_ & 0xff) | (instruction_buffer_.value & 0xff00) + data_bank_;
// If the incorrect address isn't actually incorrect, skip its usage.
if(operation == OperationConstructAbsoluteXRead && data_address_ == incorrect_data_address_) {
++next_op_;
}
data_address_increment_mask_ = 0xff'ff'ff;
continue;
case OperationConstructAbsoluteYRead:
case OperationConstructAbsoluteY:
data_address_ = instruction_buffer_.value + y() + data_bank_;
incorrect_data_address_ = (data_address_ & 0xff) + (instruction_buffer_.value & 0xff00) + data_bank_;
// If the incorrect address isn't actually incorrect, skip its usage.
if(operation == OperationConstructAbsoluteYRead && data_address_ == incorrect_data_address_) {
++next_op_;
}
data_address_increment_mask_ = 0xff'ff'ff;
continue;
case OperationConstructDirect:
data_address_ = (direct_ + instruction_buffer_.value) & 0xffff;
data_address_increment_mask_ = 0x00'ff'ff;
if(!(direct_&0xff)) {
// If the low byte is 0 and this is emulation mode, incrementing
// is restricted to the low byte.
data_address_increment_mask_ = e_masks_[1];
++next_op_;
}
continue;
case OperationConstructDirectLong:
data_address_ = (direct_ + instruction_buffer_.value) & 0xffff;
data_address_increment_mask_ = 0x00'ff'ff;
if(!(direct_&0xff)) {
++next_op_;
}
continue;
case OperationConstructDirectIndirect:
data_address_ = data_bank_ + data_buffer_.value;
data_address_increment_mask_ = 0xff'ff'ff;
data_buffer_.clear();
continue;
case OperationConstructDirectIndexedIndirect:
data_address_ = data_bank_ + (
((direct_ + x() + instruction_buffer_.value) & e_masks_[1]) +
(direct_ & e_masks_[0])
) & 0xffff;
data_address_increment_mask_ = 0x00'ff'ff;
if(!(direct_&0xff)) {
++next_op_;
}
continue;
case OperationConstructDirectIndirectIndexedLong:
data_address_ = y() + data_buffer_.value;
data_address_increment_mask_ = 0xff'ff'ff;
data_buffer_.clear();
continue;
case OperationConstructDirectIndirectLong:
data_address_ = data_buffer_.value;
data_address_increment_mask_ = 0xff'ff'ff;
data_buffer_.clear();
continue;
// TODO: confirm incorrect_data_address_ below.
case OperationConstructDirectX:
data_address_ = (
(direct_ & e_masks_[0]) +
((instruction_buffer_.value + direct_ + x()) & e_masks_[1])
) & 0xffff;
data_address_increment_mask_ = 0x00'ff'ff;
incorrect_data_address_ = (direct_ & 0xff00) + (data_address_ & 0x00ff);
if(!(direct_&0xff)) {
++next_op_;
}
continue;
case OperationConstructDirectY:
data_address_ = (
(direct_ & e_masks_[0]) +
((instruction_buffer_.value + direct_ + y()) & e_masks_[1])
) & 0xffff;
data_address_increment_mask_ = 0x00'ff'ff;
incorrect_data_address_ = (direct_ & 0xff00) + (data_address_ & 0x00ff);
if(!(direct_&0xff)) {
++next_op_;
}
continue;
case OperationConstructStackRelative:
data_address_ = (s_.full + instruction_buffer_.value) & 0xffff;
data_address_increment_mask_ = 0x00'ff'ff;
continue;
case OperationConstructStackRelativeIndexedIndirect:
data_address_ = data_bank_ + data_buffer_.value + y();
data_address_increment_mask_ = 0xff'ff'ff;
data_buffer_.clear();
continue;
case OperationConstructPER:
data_buffer_.value = instruction_buffer_.value + pc_;
data_buffer_.size = 2;
continue;
case OperationPrepareException: {
// Put the proper exception vector into the data address, put the flags and PC
// into the data buffer (possibly also PBR), and skip an instruction if in
// emulation mode.
//
// I've assumed here that interrupts, BRKs and COPs can be usurped similarly
// to a 6502 but may not have the exact details correct. E.g. if IRQ has
// become inactive since the decision was made to start an interrupt, should
// that turn into a BRK?
bool is_brk = false;
if(pending_exceptions_ & (Reset | PowerOn)) {
pending_exceptions_ &= ~(Reset | PowerOn);
data_address_ = 0xfffc;
set_reset_state();
} else if(pending_exceptions_ & NMI) {
pending_exceptions_ &= ~NMI;
data_address_ = 0xfffa;
} else if(pending_exceptions_ & IRQ & flags_.inverse_interrupt) {
pending_exceptions_ &= ~IRQ;
data_address_ = 0xfffe;
} else {
is_brk = active_instruction_ == instructions; // Given that BRK has opcode 00.
if(is_brk) {
data_address_ = emulation_flag_ ? 0xfffe : 0xfff6;
} else {
// Implicitly: COP.
data_address_ = 0xfff4;
}
}
data_buffer_.value = (pc_ << 8) | get_flags();
if(emulation_flag_) {
if(is_brk) data_buffer_.value |= Flag::Break;
data_buffer_.size = 3;
++next_op_;
} else {
data_buffer_.value |= program_bank_ << 24;
data_buffer_.size = 4;
program_bank_ = 0;
}
flags_.inverse_interrupt = 0;
} continue;
//
// Performance.
//
#define LD(dest, src, masks) dest.full = (dest.full & masks[0]) | (src & masks[1])
#define m_top() (instruction_buffer_.value >> m_shift_) & 0xff
#define x_top() (x_.full >> x_shift_) & 0xff
#define y_top() (y_.full >> x_shift_) & 0xff
#define a_top() (a_.full >> m_shift_) & 0xff
case OperationPerform:
switch(active_instruction_->operation) {
//
// Loads, stores and transfers (and NOP, and XBA).
//
case LDA:
LD(a_, data_buffer_.value, m_masks_);
flags_.set_nz(a_.full, m_shift_);
break;
case LDX:
LD(x_, data_buffer_.value, x_masks_);
flags_.set_nz(x_.full, x_shift_);
break;
case LDY:
LD(y_, data_buffer_.value, x_masks_);
flags_.set_nz(y_.full, x_shift_);
break;
case PLB:
data_bank_ = (data_buffer_.value & 0xff) << 16;
flags_.set_nz(instruction_buffer_.value);
break;
case PLD:
direct_ = data_buffer_.value;
flags_.set_nz(instruction_buffer_.value);
break;
case PLP:
set_flags(data_buffer_.value);
break;
case STA:
data_buffer_.value = a_.full & m_masks_[1];
data_buffer_.size = 2 - m_flag();
break;
case STZ:
data_buffer_.value = 0;
data_buffer_.size = 2 - m_flag();
break;
case STX:
data_buffer_.value = x_.full & x_masks_[1];
data_buffer_.size = 2 - x_flag();
break;
case STY:
data_buffer_.value = y_.full & x_masks_[1];
data_buffer_.size = 2 - m_flag();
break;
case PHB:
data_buffer_.value = data_bank_ >> 16;
data_buffer_.size = 1;
break;
case PHK:
data_buffer_.value = program_bank_ >> 16;
data_buffer_.size = 1;
break;
case PHD:
data_buffer_.value = direct_;
data_buffer_.size = 2;
break;
case PHP:
data_buffer_.value = get_flags();
data_buffer_.size = 1;
if(emulation_flag_) {
// On the 6502, the break flag is set during a PHP.
data_buffer_.value |= Flag::Break;
}
break;
case NOP: break;
// The below attempt to obey the 8/16-bit mixed transfer rules
// as documented in https://softpixel.com/~cwright/sianse/docs/65816NFO.HTM
// (and make reasonable guesses as to the N flag).
case TXS:
s_ = x_.full & x_masks_[1];
break;
case TSX:
LD(x_, s_.full, x_masks_);
flags_.set_nz(x_.full, x_shift_);
break;
case TXY:
LD(y_, x_.full, x_masks_);
flags_.set_nz(y_.full, x_shift_);
break;
case TYX:
LD(x_, y_.full, x_masks_);
flags_.set_nz(x_.full, x_shift_);
break;
case TAX:
LD(x_, a_.full, x_masks_);
flags_.set_nz(x_.full, x_shift_);
break;
case TAY:
LD(y_, a_.full, x_masks_);
flags_.set_nz(y_.full, x_shift_);
break;
case TXA:
LD(a_, x_.full, m_masks_);
flags_.set_nz(a_.full, m_shift_);
break;
case TYA:
LD(a_, y_.full, m_masks_);
flags_.set_nz(a_.full, m_shift_);
break;
case TCD:
direct_ = a_.full;
flags_.set_nz(a_.full, 8);
break;
case TDC:
a_.full = direct_;
flags_.set_nz(a_.full, 8);
break;
case TCS:
s_.full = a_.full;
// No need to worry about byte masking here; for the stack it's handled as the emulation runs.
break;
case TSC:
a_.full = stack_address();
flags_.set_nz(a_.full, 8);
break;
case XBA: {
const uint8_t a_low = a_.halves.low;
a_.halves.low = a_.halves.high;
a_.halves.high = a_low;
flags_.set_nz(a_.halves.low);
} break;
//
// Jumps and returns.
//
case JML:
program_bank_ = instruction_buffer_.value & 0xff0000;
[[fallthrough]];
case JMP:
pc_ = uint16_t(instruction_buffer_.value);
break;
case JMPind:
pc_ = data_buffer_.value;
break;
case RTS:
pc_ = data_buffer_.value + 1;
break;
case JSL:
program_bank_ = instruction_buffer_.value & 0xff0000;
[[fallthrough]];
case JSR:
data_buffer_.value = pc_;
data_buffer_.size = 2;
pc_ = instruction_buffer_.value;
break;
case RTI:
pc_ = uint16_t(data_buffer_.value >> 8);
set_flags(uint8_t(data_buffer_.value));
if(!emulation_flag_) {
program_bank_ = (data_buffer_.value & 0xff000000) >> 8;
}
break;
//
// Block moves.
//
case MVP:
data_bank_ = (instruction_buffer_.value & 0xff) << 16;
--x_.full;
--y_.full;
--a_.full;
if(a_.full) pc_ -= 3;
break;
case MVN:
data_bank_ = (instruction_buffer_.value & 0xff) << 16;
++x_.full;
++y_.full;
--a_.full;
if(a_.full) pc_ -= 3;
break;
//
// Flag manipulation.
//
case CLC: flags_.carry = 0; break;
case CLI: flags_.inverse_interrupt = Flag::Interrupt; break;
case CLV: flags_.overflow = 0; break;
case CLD: flags_.decimal = 0; break;
case SEC: flags_.carry = Flag::Carry; break;
case SEI: flags_.inverse_interrupt = 0; break;
case SED: flags_.decimal = Flag::Decimal; break;
case REP:
set_flags(get_flags() &~ instruction_buffer_.value);
break;
case SEP:
set_flags(get_flags() | instruction_buffer_.value);
break;
case XCE: {
const bool old_emulation_flag = emulation_flag_;
set_emulation_mode(flags_.carry);
flags_.carry = old_emulation_flag;
} break;
//
// Increments and decrements.
//
case INC:
++data_buffer_.value;
flags_.set_nz(data_buffer_.value, m_shift_);
break;;
case DEC:
--data_buffer_.value;
flags_.set_nz(data_buffer_.value, m_shift_);
break;
case INX: {
const uint16_t x_inc = x_.full + 1;
LD(x_, x_inc, x_masks_);
flags_.set_nz(x_.full, x_shift_);
} break;
case DEX: {
const uint16_t x_dec = x_.full - 1;
LD(x_, x_dec, x_masks_);
flags_.set_nz(x_.full, x_shift_);
} break;
case INY: {
const uint16_t y_inc = y_.full + 1;
LD(y_, y_inc, x_masks_);
flags_.set_nz(y_.full, x_shift_);
} break;
case DEY: {
const uint16_t y_dec = y_.full - 1;
LD(y_, y_dec, x_masks_);
flags_.set_nz(y_.full, x_shift_);
} break;
//
// Bitwise operations.
//
case AND:
a_.full &= data_buffer_.value | m_masks_[0];
flags_.set_nz(a_.full, m_shift_);
break;
case EOR:
a_.full ^= data_buffer_.value;
flags_.set_nz(a_.full, m_shift_);
break;
case ORA:
a_.full |= data_buffer_.value;
flags_.set_nz(a_.full, m_shift_);
break;
case BIT:
flags_.set_n(data_buffer_.value, m_shift_);
flags_.set_z(data_buffer_.value & a_.full, m_shift_);
flags_.overflow = data_buffer_.value & Flag::Overflow;
break;
case BITimm:
flags_.set_z(data_buffer_.value & a_.full, m_shift_);
break;
case TRB:
flags_.set_z(data_buffer_.value & a_.full, m_shift_);
data_buffer_.value &= ~a_.full;
break;
case TSB:
flags_.set_z(data_buffer_.value & a_.full, m_shift_);
data_buffer_.value |= a_.full;
break;
//
// Branches.
//
#define BRA(condition) \
if(!(condition)) { \
next_op_ += 3; \
} else { \
data_buffer_.size = 2; \
data_buffer_.value = pc_ + int8_t(instruction_buffer_.value); \
\
if((pc_ & 0xff00) == (instruction_buffer_.value & 0xff00)) { \
++next_op_; \
} \
}
case BPL: BRA(!(flags_.negative_result&0x80)); break;
case BMI: BRA(flags_.negative_result&0x80); break;
case BVC: BRA(!flags_.overflow); break;
case BVS: BRA(flags_.overflow); break;
case BCC: BRA(!flags_.carry); break;
case BCS: BRA(flags_.carry); break;
case BNE: BRA(flags_.zero_result); break;
case BEQ: BRA(!flags_.zero_result); break;
case BRA: BRA(true); break;
#undef BRA
case BRL:
pc_ += int16_t(instruction_buffer_.value);
break;
//
// Shifts and rolls.
//
case ASL:
flags_.carry = data_buffer_.value >> (7 + m_shift_);
data_buffer_.value <<= 1;
flags_.set_nz(data_buffer_.value, m_shift_);
break;
case LSR:
flags_.carry = data_buffer_.value & 1;
data_buffer_.value >>= 1;
flags_.set_nz(data_buffer_.value, m_shift_);
break;
case ROL:
data_buffer_.value = (data_buffer_.value << 1) | flags_.carry;
flags_.carry = data_buffer_.value >> (8 + m_shift_);
flags_.set_nz(data_buffer_.value, m_shift_);
break;
case ROR: {
const uint8_t next_carry = data_buffer_.value & 1;
data_buffer_.value = (data_buffer_.value >> 1) | (flags_.carry << (7 + m_shift_));
flags_.carry = next_carry;
flags_.set_nz(data_buffer_.value, m_shift_);
} break;
//
// Arithmetic.
//
#define cp(v, shift, masks) {\
const uint32_t temp32 = (v.full & masks[1]) - (data_buffer_.value & masks[1]); \
flags_.set_nz(uint16_t(temp32), shift); \
flags_.carry = ((~temp32) >> (8 + shift))&1; \
}
case CMP: cp(a_, m_shift_, m_masks_); break;
case CPX: cp(x_, x_shift_, x_masks_); break;
case CPY: cp(y_, x_shift_, x_masks_); break;
#undef cp
case SBC:
if(flags_.decimal) {
// I've yet to manage to find a rational way to map this to an ADC,
// hence the yucky repetition of code here.
const uint16_t a = a_.full & m_masks_[1];
unsigned int result = 0;
unsigned int borrow = flags_.carry ^ 1;
#define nibble(mask, adjustment, carry) \
result += (a & mask) - (data_buffer_.value & mask) - borrow; \
if(result > mask) result -= adjustment;\
borrow = (result > mask) ? carry : 0; \
result &= (carry - 1);
nibble(0x000f, 0x0006, 0x00010);
nibble(0x00f0, 0x0060, 0x00100);
nibble(0x0f00, 0x0600, 0x01000);
nibble(0xf000, 0x6000, 0x10000);
#undef nibble
flags_.overflow = ~(( (result ^ a_.full) & (result ^ data_buffer_.value) ) >> (1 + m_shift_))&0x40;
flags_.set_nz(result, m_shift_);
flags_.carry = ((borrow >> 16)&1)^1;
LD(a_, result, m_masks_);
break;
}
data_buffer_.value = ~data_buffer_.value & m_masks_[1];
[[fallthrough]];
case ADC: {
int result;
const uint16_t a = a_.full & m_masks_[1];
if(flags_.decimal) {
result = flags_.carry;
#define nibble(mask, limit, adjustment, carry) \
result += (a & mask) + (data_buffer_.value & mask); \
if(result >= limit) result = ((result + (adjustment)) & (carry - 1)) + carry;
nibble(0x000f, 0x000a, 0x0006, 0x00010);
nibble(0x00f0, 0x00a0, 0x0060, 0x00100);
nibble(0x0f00, 0x0a00, 0x0600, 0x01000);
nibble(0xf000, 0xa000, 0x6000, 0x10000);
#undef nibble
} else {
result = a + data_buffer_.value + flags_.carry;
}
flags_.overflow = (( (result ^ a_.full) & (result ^ data_buffer_.value) ) >> (1 + m_shift_))&0x40;
flags_.set_nz(result, m_shift_);
flags_.carry = (result >> (8 + m_shift_))&1;
LD(a_, result, m_masks_);
} break;
//
// STP and WAI
//
case STP:
required_exceptions_ = Reset;
break;
case WAI:
required_exceptions_ = Reset | IRQ | NMI;
break;
}
continue;
}
#undef LD
#undef m_top
#undef x_top
#undef y_top
#undef a_top
// TODO: the ready line.
// Store a selection as to the exceptions, if any, that would be honoured after this cycle if the
// next thing is a MoveToNextProgram.
selected_exceptions_ = pending_exceptions_ & (flags_.inverse_interrupt | PowerOn | Reset | NMI);
number_of_cycles -= bus_handler_.perform_bus_operation(bus_operation, bus_address, bus_value);
}
#undef read
#undef write
#undef bus_operation
#undef x
#undef y
#undef m_flag
#undef x_flag
#undef stack_address
cycles_left_to_run_ = number_of_cycles;
}
void ProcessorBase::set_power_on(bool active) {
if(active) {
pending_exceptions_ |= PowerOn;
} else {
pending_exceptions_ &= ~PowerOn;
}
}
void ProcessorBase::set_irq_line(bool active) {
if(active) {
pending_exceptions_ |= IRQ;
} else {
pending_exceptions_ &= ~IRQ;
}
}
void ProcessorBase::set_reset_line(bool active) {
if(active) {
pending_exceptions_ |= Reset;
} else {
pending_exceptions_ &= ~Reset;
}
}
void ProcessorBase::set_nmi_line(bool active) {
// This is edge triggered.
if(active) {
pending_exceptions_ |= NMI;
}
}
// The 65816 can't jam.
bool ProcessorBase::is_jammed() const { return false; }
Reference in New Issue View Git Blame Copy Permalink