EightBitNet/Test_M6502/roms/65C02_extended_opcodes_test.a65c
Adrian Conlon 9a06b1743f Port of EightBit library to .Net (unworking!)
Signed-off-by: Adrian Conlon <Adrian.conlon@gmail.com>
2019-02-02 15:12:51 +00:00

2883 lines
78 KiB
Plaintext

;
; 6 5 C 0 2 E X T E N D E D O P C O D E S T E S T
;
; Copyright (C) 2013-2017 Klaus Dormann
;
; This program is free software: you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation, either version 3 of the License, or
; (at your option) any later version.
;
; This program is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
; GNU General Public License for more details.
;
; You should have received a copy of the GNU General Public License
; along with this program. If not, see <http://www.gnu.org/licenses/>.
; This program is designed to test all additional 65C02 opcodes, addressing
; modes and functionality not available in the NMOS version of the 6502.
; The 6502_functional_test is a prerequisite to this test.
; NMI, IRQ, STP & WAI are covered in the 6502_interrupt_test.
;
; version 04-dec-2017
; contact info at http://2m5.de or email K@2m5.de
;
; assembled with AS65 from http://www.kingswood-consulting.co.uk/assemblers/
; command line switches: -l -m -s2 -w -x -h0
; | | | | | no page headers in listing
; | | | | 65C02 extensions
; | | | wide listing (133 char/col)
; | | write intel hex file instead of binary
; | expand macros in listing
; generate pass2 listing
;
; No IO - should be run from a monitor with access to registers.
; To run load intel hex image with a load command, than alter PC to 400 hex
; (code_segment) and enter a go command.
; Loop on program counter determines error or successful completion of test.
; Check listing for relevant traps (jump/branch *).
; Please note that in early tests some instructions will have to be used before
; they are actually tested!
;
; RESET, NMI or IRQ should not occur and will be trapped if vectors are enabled.
; Tests documented behavior of the original 65C02 only!
; Decimal ops will only be tested with valid BCD operands and the V flag will
; be ignored as it is absolutely useless in decimal mode.
;
; Debugging hints:
; Most of the code is written sequentially. if you hit a trap, check the
; immediately preceeding code for the instruction to be tested. Results are
; tested first, flags are checked second by pushing them onto the stack and
; pulling them to the accumulator after the result was checked. The "real"
; flags are no longer valid for the tested instruction at this time!
; If the tested instruction was indexed, the relevant index (X or Y) must
; also be checked. Opposed to the flags, X and Y registers are still valid.
;
; versions:
; 19-jul-2013 1st version distributed for testing
; 23-jul-2013 fixed BRA out of range due to larger trap macros
; added RAM integrity check
; 16-aug-2013 added error report to standard output option
; 23-aug-2015 change revoked
; 24-aug-2015 all self modifying immediate opcodes now execute in data RAM
; 28-aug-2015 fixed decimal adc/sbc immediate only testing carry
; 09-feb-2017 fixed RMB/SMB tested when they shouldn't be tested
; 04-dec-2017 fixed BRK not tested for actually going through the IRQ vector
; added option to skip the remainder of a failing test
; in report.i65
; added skip override to undefined opcode as NOP test
; C O N F I G U R A T I O N
;ROM_vectors writable (0=no, 1=yes)
;if ROM vectors can not be used interrupts will not be trapped
;as a consequence BRK can not be tested but will be emulated to test RTI
ROM_vectors = 1
;load_data_direct (0=move from code segment, 1=load directly)
;loading directly is preferred but may not be supported by your platform
;0 produces only consecutive object code, 1 is not suitable for a binary image
load_data_direct = 1
;I_flag behavior (0=force enabled, 1=force disabled, 2=prohibit change, 3=allow
;change) 2 requires extra code and is not recommended.
I_flag = 3
;configure memory - try to stay away from memory used by the system
;zero_page memory start address, $4e (78) consecutive Bytes required
; add 2 if I_flag = 2
zero_page = $a
;data_segment memory start address, $63 (99) consecutive Bytes required
; + 12 Bytes at data_segment + $f9 (JMP indirect page cross test)
data_segment = $200
if (data_segment & $ff) != 0
ERROR ERROR ERROR low byte of data_segment MUST be $00 !!
endif
;code_segment memory start address, 10kB of consecutive space required
; add 1 kB if I_flag = 2
code_segment = $400
;added WDC only opcodes WAI & STP (0=test as NOPs, >0=no test)
wdc_op = 1
;added Rockwell & WDC opcodes BBR, BBS, RMB & SMB
;(0=test as NOPs, 1=full test, >1=no test)
rkwl_wdc_op = 1
;skip testing all undefined opcodes override
;0=test as NOP, >0=skip
skip_nop = 0
;report errors through I/O channel (0=use standard self trap loops, 1=include
;report.i65 as I/O channel, add 3 kB)
report = 0
;RAM integrity test option. Checks for undesired RAM writes.
;set lowest non RAM or RAM mirror address page (-1=disable, 0=64k, $40=16k)
;leave disabled if a monitor, OS or background interrupt is allowed to alter RAM
ram_top = -1
noopt ;do not take shortcuts
;macros for error & success traps to allow user modification
;example:
;trap macro
; jsr my_error_handler
; endm
;trap_eq macro
; bne skip\?
; trap ;failed equal (zero)
;skip\?
; endm
;
; my_error_handler should pop the calling address from the stack and report it.
; putting larger portions of code (more than 3 bytes) inside the trap macro
; may lead to branch range problems for some tests.
if report = 0
trap macro
jmp * ;failed anyway
endm
trap_eq macro
beq * ;failed equal (zero)
endm
trap_ne macro
bne * ;failed not equal (non zero)
endm
trap_cs macro
bcs * ;failed carry set
endm
trap_cc macro
bcc * ;failed carry clear
endm
trap_mi macro
bmi * ;failed minus (bit 7 set)
endm
trap_pl macro
bpl * ;failed plus (bit 7 clear)
endm
trap_vs macro
bvs * ;failed overflow set
endm
trap_vc macro
bvc * ;failed overflow clear
endm
; please observe that during the test the stack gets invalidated
; therefore a RTS inside the success macro is not possible
success macro
jmp * ;test passed, no errors
endm
endif
if report = 1
trap macro
jsr report_error
endm
trap_eq macro
bne skip\?
trap ;failed equal (zero)
skip\?
endm
trap_ne macro
beq skip\?
trap ;failed not equal (non zero)
skip\?
endm
trap_cs macro
bcc skip\?
trap ;failed carry set
skip\?
endm
trap_cc macro
bcs skip\?
trap ;failed carry clear
skip\?
endm
trap_mi macro
bpl skip\?
trap ;failed minus (bit 7 set)
skip\?
endm
trap_pl macro
bmi skip\?
trap ;failed plus (bit 7 clear)
skip\?
endm
trap_vs macro
bvc skip\?
trap ;failed overflow set
skip\?
endm
trap_vc macro
bvs skip\?
trap ;failed overflow clear
skip\?
endm
; please observe that during the test the stack gets invalidated
; therefore a RTS inside the success macro is not possible
success macro
jsr report_success
endm
endif
carry equ %00000001 ;flag bits in status
zero equ %00000010
intdis equ %00000100
decmode equ %00001000
break equ %00010000
reserv equ %00100000
overfl equ %01000000
minus equ %10000000
fc equ carry
fz equ zero
fzc equ carry+zero
fv equ overfl
fvz equ overfl+zero
fn equ minus
fnc equ minus+carry
fnz equ minus+zero
fnzc equ minus+zero+carry
fnv equ minus+overfl
fao equ break+reserv ;bits always on after PHP, BRK
fai equ fao+intdis ;+ forced interrupt disable
m8 equ $ff ;8 bit mask
m8i equ $ff&~intdis ;8 bit mask - interrupt disable
;macros to allow masking of status bits.
;masking of interrupt enable/disable on load and compare
;masking of always on bits after PHP or BRK (unused & break) on compare
if I_flag = 0
load_flag macro
lda #\1&m8i ;force enable interrupts (mask I)
endm
cmp_flag macro
cmp #(\1|fao)&m8i ;I_flag is always enabled + always on bits
endm
eor_flag macro
eor #(\1&m8i|fao) ;mask I, invert expected flags + always on bits
endm
endif
if I_flag = 1
load_flag macro
lda #\1|intdis ;force disable interrupts
endm
cmp_flag macro
cmp #(\1|fai)&m8 ;I_flag is always disabled + always on bits
endm
eor_flag macro
eor #(\1|fai) ;invert expected flags + always on bits + I
endm
endif
if I_flag = 2
load_flag macro
lda #\1
ora flag_I_on ;restore I-flag
and flag_I_off
endm
cmp_flag macro
eor flag_I_on ;I_flag is never changed
cmp #(\1|fao)&m8i ;expected flags + always on bits, mask I
endm
eor_flag macro
eor flag_I_on ;I_flag is never changed
eor #(\1&m8i|fao) ;mask I, invert expected flags + always on bits
endm
endif
if I_flag = 3
load_flag macro
lda #\1 ;allow test to change I-flag (no mask)
endm
cmp_flag macro
cmp #(\1|fao)&m8 ;expected flags + always on bits
endm
eor_flag macro
eor #\1|fao ;invert expected flags + always on bits
endm
endif
;macros to set (register|memory|zeropage) & status
set_stat macro ;setting flags in the processor status register
load_flag \1
pha ;use stack to load status
plp
endm
set_a macro ;precharging accu & status
load_flag \2
pha ;use stack to load status
lda #\1 ;precharge accu
plp
endm
set_x macro ;precharging index & status
load_flag \2
pha ;use stack to load status
ldx #\1 ;precharge index x
plp
endm
set_y macro ;precharging index & status
load_flag \2
pha ;use stack to load status
ldy #\1 ;precharge index y
plp
endm
set_ax macro ;precharging indexed accu & immediate status
load_flag \2
pha ;use stack to load status
lda \1,x ;precharge accu
plp
endm
set_ay macro ;precharging indexed accu & immediate status
load_flag \2
pha ;use stack to load status
lda \1,y ;precharge accu
plp
endm
set_z macro ;precharging indexed zp & immediate status
load_flag \2
pha ;use stack to load status
lda \1,x ;load to zeropage
sta zpt
plp
endm
set_zx macro ;precharging zp,x & immediate status
load_flag \2
pha ;use stack to load status
lda \1,x ;load to indexed zeropage
sta zpt,x
plp
endm
set_abs macro ;precharging indexed memory & immediate status
load_flag \2
pha ;use stack to load status
lda \1,x ;load to memory
sta abst
plp
endm
set_absx macro ;precharging abs,x & immediate status
load_flag \2
pha ;use stack to load status
lda \1,x ;load to indexed memory
sta abst,x
plp
endm
;macros to test (register|memory|zeropage) & status & (mask)
tst_stat macro ;testing flags in the processor status register
php ;save status
pla ;use stack to retrieve status
pha
cmp_flag \1
trap_ne
plp ;restore status
endm
tst_a macro ;testing result in accu & flags
php ;save flags
cmp #\1 ;test result
trap_ne
pla ;load status
pha
cmp_flag \2
trap_ne
plp ;restore status
endm
tst_as macro ;testing result in accu & flags, save accu
pha
php ;save flags
cmp #\1 ;test result
trap_ne
pla ;load status
pha
cmp_flag \2
trap_ne
plp ;restore status
pla
endm
tst_x macro ;testing result in x index & flags
php ;save flags
cpx #\1 ;test result
trap_ne
pla ;load status
pha
cmp_flag \2
trap_ne
plp ;restore status
endm
tst_y macro ;testing result in y index & flags
php ;save flags
cpy #\1 ;test result
trap_ne
pla ;load status
pha
cmp_flag \2
trap_ne
plp ;restore status
endm
tst_ax macro ;indexed testing result in accu & flags
php ;save flags
cmp \1,x ;test result
trap_ne
pla ;load status
eor_flag \3
cmp \2,x ;test flags
trap_ne ;
endm
tst_ay macro ;indexed testing result in accu & flags
php ;save flags
cmp \1,y ;test result
trap_ne ;
pla ;load status
eor_flag \3
cmp \2,y ;test flags
trap_ne
endm
tst_z macro ;indexed testing result in zp & flags
php ;save flags
lda zpt
cmp \1,x ;test result
trap_ne
pla ;load status
eor_flag \3
cmp \2,x ;test flags
trap_ne
endm
tst_zx macro ;testing result in zp,x & flags
php ;save flags
lda zpt,x
cmp \1,x ;test result
trap_ne
pla ;load status
eor_flag \3
cmp \2,x ;test flags
trap_ne
endm
tst_abs macro ;indexed testing result in memory & flags
php ;save flags
lda abst
cmp \1,x ;test result
trap_ne
pla ;load status
eor_flag \3
cmp \2,x ;test flags
trap_ne
endm
tst_absx macro ;testing result in abs,x & flags
php ;save flags
lda abst,x
cmp \1,x ;test result
trap_ne
pla ;load status
eor_flag \3
cmp \2,x ;test flags
trap_ne
endm
; RAM integrity test
; verifies that none of the previous tests has altered RAM outside of the
; designated write areas.
; uses zpt word as indirect pointer, zpt+2 word as checksum
if ram_top > -1
check_ram macro
cld
lda #0
sta zpt ;set low byte of indirect pointer
sta zpt+3 ;checksum high byte
ldx #11 ;reset modifiable RAM
ccs1\? sta jxi_tab,x ;JMP indirect page cross area
dex
bpl ccs1\?
clc
ldx #zp_bss-zero_page ;zeropage - write test area
ccs3\? adc zero_page,x
bcc ccs2\?
inc zpt+3 ;carry to high byte
clc
ccs2\? inx
bne ccs3\?
ldx #hi(abs1) ;set high byte of indirect pointer
stx zpt+1
ldy #lo(abs1) ;data after write & execute test area
ccs5\? adc (zpt),y
bcc ccs4\?
inc zpt+3 ;carry to high byte
clc
ccs4\? iny
bne ccs5\?
inx ;advance RAM high address
stx zpt+1
cpx #ram_top
bne ccs5\?
sta zpt+2 ;checksum low is
cmp ram_chksm ;checksum low expected
trap_ne ;checksum mismatch
lda zpt+3 ;checksum high is
cmp ram_chksm+1 ;checksum high expected
trap_ne ;checksum mismatch
endm
else
check_ram macro
;RAM check disabled - RAM size not set
endm
endif
next_test macro ;make sure, tests don't jump the fence
lda test_case ;previous test
cmp #test_num
trap_ne ;test is out of sequence
test_num = test_num + 1
lda #test_num ;*** next tests' number
sta test_case
;check_ram ;uncomment to find altered RAM after each test
endm
if load_data_direct = 1
data
else
bss ;uninitialized segment, copy of data at end of code!
endif
org zero_page
;break test interrupt save
irq_a ds 1 ;a register
irq_x ds 1 ;x register
if I_flag = 2
;masking for I bit in status
flag_I_on ds 1 ;or mask to load flags
flag_I_off ds 1 ;and mask to load flags
endif
zpt ;5 bytes store/modify test area
;add/subtract operand generation and result/flag prediction
adfc ds 1 ;carry flag before op
ad1 ds 1 ;operand 1 - accumulator
ad2 ds 1 ;operand 2 - memory / immediate
adrl ds 1 ;expected result bits 0-7
adrh ds 1 ;expected result bit 8 (carry)
adrf ds 1 ;expected flags NV0000ZC (-V in decimal mode)
sb2 ds 1 ;operand 2 complemented for subtract
zp_bss
zp1 db $c3,$82,$41,0 ;test patterns for LDx BIT ROL ROR ASL LSR
zp7f db $7f ;test pattern for compare
;logical zeropage operands
zpOR db 0,$1f,$71,$80 ;test pattern for OR
zpAN db $0f,$ff,$7f,$80 ;test pattern for AND
zpEO db $ff,$0f,$8f,$8f ;test pattern for EOR
;indirect addressing pointers
ind1 dw abs1 ;indirect pointer to pattern in absolute memory
dw abs1+1
dw abs1+2
dw abs1+3
dw abs7f
inw1 dw abs1-$f8 ;indirect pointer for wrap-test pattern
indt dw abst ;indirect pointer to store area in absolute memory
dw abst+1
dw abst+2
dw abst+3
inwt dw abst-$f8 ;indirect pointer for wrap-test store
indAN dw absAN ;indirect pointer to AND pattern in absolute memory
dw absAN+1
dw absAN+2
dw absAN+3
indEO dw absEO ;indirect pointer to EOR pattern in absolute memory
dw absEO+1
dw absEO+2
dw absEO+3
indOR dw absOR ;indirect pointer to OR pattern in absolute memory
dw absOR+1
dw absOR+2
dw absOR+3
;add/subtract indirect pointers
adi2 dw ada2 ;indirect pointer to operand 2 in absolute memory
sbi2 dw sba2 ;indirect pointer to complemented operand 2 (SBC)
adiy2 dw ada2-$ff ;with offset for indirect indexed
sbiy2 dw sba2-$ff
zp_bss_end
org data_segment
pg_x ds 2 ;high JMP indirect address for page cross bug
test_case ds 1 ;current test number
ram_chksm ds 2 ;checksum for RAM integrity test
;add/subtract operand copy - abs tests write area
abst ;5 bytes store/modify test area
ada2 ds 1 ;operand 2
sba2 ds 1 ;operand 2 complemented for subtract
ds 3 ;fill remaining bytes
data_bss
if load_data_direct = 1
ex_adci adc #0 ;execute immediate opcodes
rts
ex_sbci sbc #0 ;execute immediate opcodes
rts
else
ex_adci ds 3
ex_sbci ds 3
endif
abs1 db $c3,$82,$41,0 ;test patterns for LDx BIT ROL ROR ASL LSR
abs7f db $7f ;test pattern for compare
;loads
fLDx db fn,fn,0,fz ;expected flags for load
;shifts
rASL ;expected result ASL & ROL -carry
rROL db $86,$04,$82,0 ; "
rROLc db $87,$05,$83,1 ;expected result ROL +carry
rLSR ;expected result LSR & ROR -carry
rROR db $61,$41,$20,0 ; "
rRORc db $e1,$c1,$a0,$80 ;expected result ROR +carry
fASL ;expected flags for shifts
fROL db fnc,fc,fn,fz ;no carry in
fROLc db fnc,fc,fn,0 ;carry in
fLSR
fROR db fc,0,fc,fz ;no carry in
fRORc db fnc,fn,fnc,fn ;carry in
;increments (decrements)
rINC db $7f,$80,$ff,0,1 ;expected result for INC/DEC
fINC db 0,fn,fn,fz,0 ;expected flags for INC/DEC
;logical memory operand
absOR db 0,$1f,$71,$80 ;test pattern for OR
absAN db $0f,$ff,$7f,$80 ;test pattern for AND
absEO db $ff,$0f,$8f,$8f ;test pattern for EOR
;logical accu operand
absORa db 0,$f1,$1f,0 ;test pattern for OR
absANa db $f0,$ff,$ff,$ff ;test pattern for AND
absEOa db $ff,$f0,$f0,$0f ;test pattern for EOR
;logical results
absrlo db 0,$ff,$7f,$80
absflo db fz,fn,0,fn
data_bss_end
;define area for page crossing JMP (abs) & JMP (abs,x) test
jxi_tab equ data_segment + $100 - 7 ;JMP (jxi_tab,x) x=6
ji_tab equ data_segment + $100 - 3 ;JMP (ji_tab+2)
jxp_tab equ data_segment + $100 ;JMP (jxp_tab-255) x=255
code
org code_segment
start cld
ldx #$ff
txs
lda #0 ;*** test 0 = initialize
sta test_case
test_num = 0
;stop interrupts before initializing BSS
if I_flag = 1
sei
endif
;initialize I/O for report channel
if report = 1
jsr report_init
endif
;initialize BSS segment
if load_data_direct != 1
ldx #zp_end-zp_init-1
ld_zp lda zp_init,x
sta zp_bss,x
dex
bpl ld_zp
ldx #data_end-data_init-1
ld_data lda data_init,x
sta data_bss,x
dex
bpl ld_data
if ROM_vectors = 1
ldx #5
ld_vect lda vec_init,x
sta vec_bss,x
dex
bpl ld_vect
endif
endif
;retain status of interrupt flag
if I_flag = 2
php
pla
and #4 ;isolate flag
sta flag_I_on ;or mask
eor #lo(~4) ;reverse
sta flag_I_off ;and mask
endif
;generate checksum for RAM integrity test
if ram_top > -1
lda #0
sta zpt ;set low byte of indirect pointer
sta ram_chksm+1 ;checksum high byte
ldx #11 ;reset modifiable RAM
gcs1 sta jxi_tab,x ;JMP indirect page cross area
dex
bpl gcs1
clc
ldx #zp_bss-zero_page ;zeropage - write test area
gcs3 adc zero_page,x
bcc gcs2
inc ram_chksm+1 ;carry to high byte
clc
gcs2 inx
bne gcs3
ldx #hi(abs1) ;set high byte of indirect pointer
stx zpt+1
ldy #lo(abs1) ;data after write & execute test area
gcs5 adc (zpt),y
bcc gcs4
inc ram_chksm+1 ;carry to high byte
clc
gcs4 iny
bne gcs5
inx ;advance RAM high address
stx zpt+1
cpx #ram_top
bne gcs5
sta ram_chksm ;checksum complete
endif
next_test
;testing stack operations PHX PHY PLX PLY
lda #$99 ;protect a
ldx #$ff ;initialize stack
txs
ldx #$55
phx
ldx #$aa
phx
cpx $1fe ;on stack ?
trap_ne
tsx
cpx #$fd ;sp decremented?
trap_ne
ply
cpy #$aa ;successful retreived from stack?
trap_ne
ply
cpy #$55
trap_ne
cpy $1ff ;remains on stack?
trap_ne
tsx
cpx #$ff ;sp incremented?
trap_ne
ldy #$a5
phy
ldy #$5a
phy
cpy $1fe ;on stack ?
trap_ne
tsx
cpx #$fd ;sp decremented?
trap_ne
plx
cpx #$5a ;successful retreived from stack?
trap_ne
plx
cpx #$a5
trap_ne
cpx $1ff ;remains on stack?
trap_ne
tsx
cpx #$ff ;sp incremented?
trap_ne
cmp #$99 ;unchanged?
trap_ne
next_test
; test PHX does not alter flags or X but PLX does
ldy #$aa ;protect y
set_x 1,$ff ;push
phx
tst_x 1,$ff
set_x 0,0
phx
tst_x 0,0
set_x $ff,$ff
phx
tst_x $ff,$ff
set_x 1,0
phx
tst_x 1,0
set_x 0,$ff
phx
tst_x 0,$ff
set_x $ff,0
phx
tst_x $ff,0
set_x 0,$ff ;pull
plx
tst_x $ff,$ff-zero
set_x $ff,0
plx
tst_x 0,zero
set_x $fe,$ff
plx
tst_x 1,$ff-zero-minus
set_x 0,0
plx
tst_x $ff,minus
set_x $ff,$ff
plx
tst_x 0,$ff-minus
set_x $fe,0
plx
tst_x 1,0
cpy #$aa ;Y unchanged
trap_ne
next_test
; test PHY does not alter flags or Y but PLY does
ldx #$55 ;x & a protected
set_y 1,$ff ;push
phy
tst_y 1,$ff
set_y 0,0
phy
tst_y 0,0
set_y $ff,$ff
phy
tst_y $ff,$ff
set_y 1,0
phy
tst_y 1,0
set_y 0,$ff
phy
tst_y 0,$ff
set_y $ff,0
phy
tst_y $ff,0
set_y 0,$ff ;pull
ply
tst_y $ff,$ff-zero
set_y $ff,0
ply
tst_y 0,zero
set_y $fe,$ff
ply
tst_y 1,$ff-zero-minus
set_y 0,0
ply
tst_y $ff,minus
set_y $ff,$ff
ply
tst_y 0,$ff-minus
set_y $fe,0
ply
tst_y 1,0
cpx #$55 ;x unchanged?
trap_ne
next_test
; PC modifying instructions (BRA, BBR, BBS, 1, 2, 3 byte NOPs, JMP(abs,x))
; testing unconditional branch BRA
ldx #$81 ;protect unused registers
ldy #$7e
set_a 0,$ff
bra br1 ;branch should always be taken
trap
br1
tst_a 0,$ff
set_a $ff,0
bra br2 ;branch should always be taken
trap
br2
tst_a $ff,0
cpx #$81
trap_ne
cpy #$7e
trap_ne
next_test
ldy #0 ;branch range test
bra bra0
bra1 cpy #1
trap_ne ;long range backward
iny
bra bra2
bra3 cpy #3
trap_ne ;long range backward
iny
bra bra4
bra5 cpy #5
trap_ne ;long range backward
iny
ldy #0
bra brf0
iny
iny
iny
iny
brf0 bra brf1
iny
iny
iny
brf1 iny
bra brf2
iny
iny
brf2 iny
iny
bra brf3
iny
brf3 iny
iny
iny
bra brf4
brf4 iny
iny
iny
iny
cpy #10
trap_ne ;short range forward
bra brb0
brb4 dey
dey
dey
dey
bra brb5
brb3 dey
dey
dey
bra brb4
brb2 dey
dey
bra brb3
brb1 dey
bra brb2
brb0 bra brb1
brb5 cpy #0
trap_ne ;short range backward
bra bra6
bra4 cpy #4
trap_ne ;long range forward
iny
bra bra5
bra2 cpy #2
trap_ne ;long range forward
iny
bra bra3
bra0 cpy #0
trap_ne ;long range forward
iny
bra bra1
bra6
next_test
if rkwl_wdc_op = 1
; testing BBR & BBS
bbt macro ;\1 = bitnum
lda #(1<<\1) ;testing 1 bit on
sta zpt
set_a $33,0 ;with flags off
bbr \1,zpt,fail1\?
bbs \1,zpt,ok1\?
trap ;bbs branch not taken
fail1\?
trap ;bbr branch taken
ok1\?
tst_a $33,0
set_a $cc,$ff ;with flags on
bbr \1,zpt,fail2\?
bbs \1,zpt,ok2\?
trap ;bbs branch not taken
fail2\?
trap ;bbr branch taken
ok2\?
tst_a $cc,$ff
lda zpt
cmp #(1<<\1)
trap_ne ;zp altered
lda #$ff-(1<<\1) ;testing 1 bit off
sta zpt
set_a $33,0 ;with flags off
bbs \1,zpt,fail3\?
bbr \1,zpt,ok3\?
trap ;bbr branch not taken
fail3\?
trap ;bbs branch taken
ok3\?
tst_a $33,0
set_a $cc,$ff ;with flags on
bbs \1,zpt,fail4\?
bbr \1,zpt,ok4\?
trap ;bbr branch not taken
fail4\?
trap ;bbs branch taken
ok4\?
tst_a $cc,$ff
lda zpt
cmp #$ff-(1<<\1)
trap_ne ;zp altered
endm
ldx #$11 ;test bbr/bbs integrity
ldy #$22
bbt 0
bbt 1
bbt 2
bbt 3
bbt 4
bbt 5
bbt 6
bbt 7
cpx #$11
trap_ne ;x overwritten
cpy #$22
trap_ne ;y overwritten
next_test
bbrc macro ;\1 = bitnum
bbr \1,zpt,skip\?
eor #(1<<\1)
skip\?
endm
bbsc macro ;\1 = bitnum
bbs \1,zpt,skip\?
eor #(1<<\1)
skip\?
endm
lda #0 ;combined bit test
sta zpt
bbcl lda #0
bbrc 0
bbrc 1
bbrc 2
bbrc 3
bbrc 4
bbrc 5
bbrc 6
bbrc 7
eor zpt
trap_ne ;failed bbr bitnum in accu
lda #$ff
bbsc 0
bbsc 1
bbsc 2
bbsc 3
bbsc 4
bbsc 5
bbsc 6
bbsc 7
eor zpt
trap_ne ;failed bbs bitnum in accu
inc zpt
bne bbcl
next_test
endif
; testing NOP
nop_test macro ;\1 = opcode, \2 = # of bytes
ldy #$42
ldx #4-\2
db \1 ;test nop length
if \2 = 1
dex
dex
endif
if \2 = 2
iny
dex
endif
if \2 = 3
iny
iny
endif
dex
trap_ne ;wrong number of bytes
set_a $ff-\1,0
db \1 ;test nop integrity - flags off
nop
nop
tst_a $ff-\1,0
set_a $aa-\1,$ff
db \1 ;test nop integrity - flags on
nop
nop
tst_a $aa-\1,$ff
cpy #$42
trap_ne ;y changed
cpx #0
trap_ne ;x changed
endm
if skip_nop = 0
nop_test $02,2
nop_test $22,2
nop_test $42,2
nop_test $62,2
nop_test $82,2
nop_test $c2,2
nop_test $e2,2
nop_test $44,2
nop_test $54,2
nop_test $d4,2
nop_test $f4,2
nop_test $5c,3
nop_test $dc,3
nop_test $fc,3
nop_test $03,1
nop_test $13,1
nop_test $23,1
nop_test $33,1
nop_test $43,1
nop_test $53,1
nop_test $63,1
nop_test $73,1
nop_test $83,1
nop_test $93,1
nop_test $a3,1
nop_test $b3,1
nop_test $c3,1
nop_test $d3,1
nop_test $e3,1
nop_test $f3,1
nop_test $0b,1
nop_test $1b,1
nop_test $2b,1
nop_test $3b,1
nop_test $4b,1
nop_test $5b,1
nop_test $6b,1
nop_test $7b,1
nop_test $8b,1
nop_test $9b,1
nop_test $ab,1
nop_test $bb,1
nop_test $eb,1
nop_test $fb,1
if rkwl_wdc_op = 0 ;NOPs not available on Rockwell & WDC 65C02
nop_test $07,1
nop_test $17,1
nop_test $27,1
nop_test $37,1
nop_test $47,1
nop_test $57,1
nop_test $67,1
nop_test $77,1
nop_test $87,1
nop_test $97,1
nop_test $a7,1
nop_test $b7,1
nop_test $c7,1
nop_test $d7,1
nop_test $e7,1
nop_test $f7,1
nop_test $0f,1
nop_test $1f,1
nop_test $2f,1
nop_test $3f,1
nop_test $4f,1
nop_test $5f,1
nop_test $6f,1
nop_test $7f,1
nop_test $8f,1
nop_test $9f,1
nop_test $af,1
nop_test $bf,1
nop_test $cf,1
nop_test $df,1
nop_test $ef,1
nop_test $ff,1
endif
if wdc_op = 0 ;NOPs not available on WDC 65C02 (WAI, STP)
nop_test $cb,1
nop_test $db,1
endif
next_test
endif
; jump indirect (test page cross bug is fixed)
ldx #3 ;prepare table
ji1 lda ji_adr,x
sta ji_tab,x
dex
bpl ji1
lda #hi(ji_px) ;high address if page cross bug
sta pg_x
set_stat 0
lda #'I'
ldx #'N'
ldy #'D' ;N=0, V=0, Z=0, C=0
jmp (ji_tab)
nop
trap_ne ;runover protection
dey
dey
ji_ret php ;either SP or Y count will fail, if we do not hit
dey
dey
dey
plp
trap_eq ;returned flags OK?
trap_pl
trap_cc
trap_vc
cmp #('I'^$aa) ;returned registers OK?
trap_ne
cpx #('N'+1)
trap_ne
cpy #('D'-6)
trap_ne
tsx ;SP check
cpx #$ff
trap_ne
next_test
; jump indexed indirect
ldx #11 ;prepare table
jxi1 lda jxi_adr,x
sta jxi_tab,x
dex
bpl jxi1
lda #hi(jxi_px) ;high address if page cross bug
sta pg_x
set_stat 0
lda #'X'
ldx #4
ldy #'I' ;N=0, V=0, Z=0, C=0
jmp (jxi_tab,x)
nop
trap_ne ;runover protection
dey
dey
jxi_ret php ;either SP or Y count will fail, if we do not hit
dey
dey
dey
plp
trap_eq ;returned flags OK?
trap_pl
trap_cc
trap_vc
cmp #('X'^$aa) ;returned registers OK?
trap_ne
cpx #6
trap_ne
cpy #('I'-6)
trap_ne
tsx ;SP check
cpx #$ff
trap_ne
lda #lo(jxp_ok) ;test with index causing a page cross
sta jxp_tab
lda #hi(jxp_ok)
sta jxp_tab+1
lda #lo(jxp_px)
sta pg_x
lda #hi(jxp_px)
sta pg_x+1
ldx #$ff
jmp (jxp_tab-$ff,x)
jxp_px
trap ;page cross by index to wrong page
jxp_ok
next_test
if ROM_vectors = 1
; test BRK clears decimal mode
load_flag 0 ;with interrupts enabled if allowed!
pha
lda #'B'
ldx #'R'
ldy #'K'
plp ;N=0, V=0, Z=0, C=0
brk
dey ;should not be executed
brk_ret0 ;address of break return
php ;either SP or Y count will fail, if we do not hit
dey
dey
dey
cmp #'B'^$aa ;returned registers OK?
;the IRQ vector was never executed if A & X stay unmodified
trap_ne
cpx #'R'+1
trap_ne
cpy #'K'-6
trap_ne
pla ;returned flags OK (unchanged)?
cmp_flag 0
trap_ne
tsx ;sp?
cpx #$ff
trap_ne
;pass 2
load_flag $ff ;with interrupts disabled if allowed!
pha
lda #$ff-'B'
ldx #$ff-'R'
ldy #$ff-'K'
plp ;N=1, V=1, Z=1, C=1
brk
dey ;should not be executed
brk_ret1 ;address of break return
php ;either SP or Y count will fail, if we do not hit
dey
dey
dey
cmp #($ff-'B')^$aa ;returned registers OK?
;the IRQ vector was never executed if A & X stay unmodified
trap_ne
cpx #$ff-'R'+1
trap_ne
cpy #$ff-'K'-6
trap_ne
pla ;returned flags OK (unchanged)?
cmp_flag $ff
trap_ne
tsx ;sp?
cpx #$ff
trap_ne
next_test
endif
; testing accumulator increment/decrement INC A & DEC A
ldx #$ac ;protect x & y
ldy #$dc
set_a $fe,$ff
inc a ;ff
tst_as $ff,$ff-zero
inc a ;00
tst_as 0,$ff-minus
inc a ;01
tst_as 1,$ff-minus-zero
dec a ;00
tst_as 0,$ff-minus
dec a ;ff
tst_as $ff,$ff-zero
dec a ;fe
set_a $fe,0
inc a ;ff
tst_as $ff,minus
inc a ;00
tst_as 0,zero
inc a ;01
tst_as 1,0
dec a ;00
tst_as 0,zero
dec a ;ff
tst_as $ff,minus
cpx #$ac
trap_ne ;x altered during test
cpy #$dc
trap_ne ;y altered during test
tsx
cpx #$ff
trap_ne ;sp push/pop mismatch
next_test
; testing load / store accumulator LDA / STA (zp)
ldx #$99 ;protect x & y
ldy #$66
set_stat 0
lda (ind1)
php ;test stores do not alter flags
eor #$c3
plp
sta (indt)
php ;flags after load/store sequence
eor #$c3
cmp #$c3 ;test result
trap_ne
pla ;load status
eor_flag 0
cmp fLDx ;test flags
trap_ne
set_stat 0
lda (ind1+2)
php ;test stores do not alter flags
eor #$c3
plp
sta (indt+2)
php ;flags after load/store sequence
eor #$c3
cmp #$82 ;test result
trap_ne
pla ;load status
eor_flag 0
cmp fLDx+1 ;test flags
trap_ne
set_stat 0
lda (ind1+4)
php ;test stores do not alter flags
eor #$c3
plp
sta (indt+4)
php ;flags after load/store sequence
eor #$c3
cmp #$41 ;test result
trap_ne
pla ;load status
eor_flag 0
cmp fLDx+2 ;test flags
trap_ne
set_stat 0
lda (ind1+6)
php ;test stores do not alter flags
eor #$c3
plp
sta (indt+6)
php ;flags after load/store sequence
eor #$c3
cmp #0 ;test result
trap_ne
pla ;load status
eor_flag 0
cmp fLDx+3 ;test flags
trap_ne
cpx #$99
trap_ne ;x altered during test
cpy #$66
trap_ne ;y altered during test
ldy #3 ;testing store result
ldx #0
tstai1 lda abst,y
eor #$c3
cmp abs1,y
trap_ne ;store to indirect data
txa
sta abst,y ;clear
dey
bpl tstai1
ldx #$99 ;protect x & y
ldy #$66
set_stat $ff
lda (ind1)
php ;test stores do not alter flags
eor #$c3
plp
sta (indt)
php ;flags after load/store sequence
eor #$c3
cmp #$c3 ;test result
trap_ne
pla ;load status
eor_flag lo~fnz ;mask bits not altered
cmp fLDx ;test flags
trap_ne
set_stat $ff
lda (ind1+2)
php ;test stores do not alter flags
eor #$c3
plp
sta (indt+2)
php ;flags after load/store sequence
eor #$c3
cmp #$82 ;test result
trap_ne
pla ;load status
eor_flag lo~fnz ;mask bits not altered
cmp fLDx+1 ;test flags
trap_ne
set_stat $ff
lda (ind1+4)
php ;test stores do not alter flags
eor #$c3
plp
sta (indt+4)
php ;flags after load/store sequence
eor #$c3
cmp #$41 ;test result
trap_ne
pla ;load status
eor_flag lo~fnz ;mask bits not altered
cmp fLDx+2 ;test flags
trap_ne
set_stat $ff
lda (ind1+6)
php ;test stores do not alter flags
eor #$c3
plp
sta (indt+6)
php ;flags after load/store sequence
eor #$c3
cmp #0 ;test result
trap_ne
pla ;load status
eor_flag lo~fnz ;mask bits not altered
cmp fLDx+3 ;test flags
trap_ne
cpx #$99
trap_ne ;x altered during test
cpy #$66
trap_ne ;y altered during test
ldy #3 ;testing store result
ldx #0
tstai2 lda abst,y
eor #$c3
cmp abs1,y
trap_ne ;store to indirect data
txa
sta abst,y ;clear
dey
bpl tstai2
tsx
cpx #$ff
trap_ne ;sp push/pop mismatch
next_test
; testing STZ - zp / abs / zp,x / abs,x
ldy #123 ;protect y
ldx #4 ;precharge test area
lda #7
tstz1 sta zpt,x
asl a
dex
bpl tstz1
ldx #4
set_a $55,$ff
stz zpt
stz zpt+1
stz zpt+2
stz zpt+3
stz zpt+4
tst_a $55,$ff
tstz2 lda zpt,x ;verify zeros stored
trap_ne ;non zero after STZ zp
dex
bpl tstz2
ldx #4 ;precharge test area
lda #7
tstz3 sta zpt,x
asl a
dex
bpl tstz3
ldx #4
set_a $aa,0
stz zpt
stz zpt+1
stz zpt+2
stz zpt+3
stz zpt+4
tst_a $aa,0
tstz4 lda zpt,x ;verify zeros stored
trap_ne ;non zero after STZ zp
dex
bpl tstz4
ldx #4 ;precharge test area
lda #7
tstz5 sta abst,x
asl a
dex
bpl tstz5
ldx #4
set_a $55,$ff
stz abst
stz abst+1
stz abst+2
stz abst+3
stz abst+4
tst_a $55,$ff
tstz6 lda abst,x ;verify zeros stored
trap_ne ;non zero after STZ abs
dex
bpl tstz6
ldx #4 ;precharge test area
lda #7
tstz7 sta abst,x
asl a
dex
bpl tstz7
ldx #4
set_a $aa,0
stz abst
stz abst+1
stz abst+2
stz abst+3
stz abst+4
tst_a $aa,0
tstz8 lda abst,x ;verify zeros stored
trap_ne ;non zero after STZ abs
dex
bpl tstz8
ldx #4 ;precharge test area
lda #7
tstz11 sta zpt,x
asl a
dex
bpl tstz11
ldx #4
tstz15
set_a $55,$ff
stz zpt,x
tst_a $55,$ff
dex
bpl tstz15
ldx #4
tstz12 lda zpt,x ;verify zeros stored
trap_ne ;non zero after STZ zp
dex
bpl tstz12
ldx #4 ;precharge test area
lda #7
tstz13 sta zpt,x
asl a
dex
bpl tstz13
ldx #4
tstz16
set_a $aa,0
stz zpt,x
tst_a $aa,0
dex
bpl tstz16
ldx #4
tstz14 lda zpt,x ;verify zeros stored
trap_ne ;non zero after STZ zp
dex
bpl tstz14
ldx #4 ;precharge test area
lda #7
tstz21 sta abst,x
asl a
dex
bpl tstz21
ldx #4
tstz25
set_a $55,$ff
stz abst,x
tst_a $55,$ff
dex
bpl tstz25
ldx #4
tstz22 lda abst,x ;verify zeros stored
trap_ne ;non zero after STZ zp
dex
bpl tstz22
ldx #4 ;precharge test area
lda #7
tstz23 sta abst,x
asl a
dex
bpl tstz23
ldx #4
tstz26
set_a $aa,0
stz abst,x
tst_a $aa,0
dex
bpl tstz26
ldx #4
tstz24 lda abst,x ;verify zeros stored
trap_ne ;non zero after STZ zp
dex
bpl tstz24
cpy #123
trap_ne ;y altered during test
tsx
cpx #$ff
trap_ne ;sp push/pop mismatch
next_test
; testing BIT - zp,x / abs,x / #
ldy #$42
ldx #3
set_a $ff,0
bit zp1,x ;00 - should set Z / clear NV
tst_a $ff,fz
dex
set_a 1,0
bit zp1,x ;41 - should set V (M6) / clear NZ
tst_a 1,fv
dex
set_a 1,0
bit zp1,x ;82 - should set N (M7) & Z / clear V
tst_a 1,fnz
dex
set_a 1,0
bit zp1,x ;c3 - should set N (M7) & V (M6) / clear Z
tst_a 1,fnv
set_a 1,$ff
bit zp1,x ;c3 - should set N (M7) & V (M6) / clear Z
tst_a 1,~fz
inx
set_a 1,$ff
bit zp1,x ;82 - should set N (M7) & Z / clear V
tst_a 1,~fv
inx
set_a 1,$ff
bit zp1,x ;41 - should set V (M6) / clear NZ
tst_a 1,~fnz
inx
set_a $ff,$ff
bit zp1,x ;00 - should set Z / clear NV
tst_a $ff,~fnv
set_a $ff,0
bit abs1,x ;00 - should set Z / clear NV
tst_a $ff,fz
dex
set_a 1,0
bit abs1,x ;41 - should set V (M6) / clear NZ
tst_a 1,fv
dex
set_a 1,0
bit abs1,x ;82 - should set N (M7) & Z / clear V
tst_a 1,fnz
dex
set_a 1,0
bit abs1,x ;c3 - should set N (M7) & V (M6) / clear Z
tst_a 1,fnv
set_a 1,$ff
bit abs1,x ;c3 - should set N (M7) & V (M6) / clear Z
tst_a 1,~fz
inx
set_a 1,$ff
bit abs1,x ;82 - should set N (M7) & Z / clear V
tst_a 1,~fv
inx
set_a 1,$ff
bit abs1,x ;41 - should set V (M6) / clear NZ
tst_a 1,~fnz
inx
set_a $ff,$ff
bit abs1,x ;00 - should set Z / clear NV
tst_a $ff,~fnv
set_a $ff,0
bit #$00 ;00 - should set Z
tst_a $ff,fz
dex
set_a 1,0
bit #$41 ;41 - should clear Z
tst_a 1,0
; *** DEBUG INFO ***
; if it fails the previous test and your BIT # has set the V flag
; see http://forum.6502.org/viewtopic.php?f=2&t=2241&p=27243#p27239
; why it shouldn't alter N or V flags on a BIT #
dex
set_a 1,0
bit #$82 ;82 - should set Z
tst_a 1,fz
dex
set_a 1,0
bit #$c3 ;c3 - should clear Z
tst_a 1,0
set_a 1,$ff
bit #$c3 ;c3 - clear Z
tst_a 1,~fz
inx
set_a 1,$ff
bit #$82 ;82 - should set Z
tst_a 1,$ff
inx
set_a 1,$ff
bit #$41 ;41 - should clear Z
tst_a 1,~fz
inx
set_a $ff,$ff
bit #$00 ;00 - should set Z
tst_a $ff,$ff
cpx #3
trap_ne ;x altered during test
cpy #$42
trap_ne ;y altered during test
tsx
cpx #$ff
trap_ne ;sp push/pop mismatch
next_test
; testing TRB, TSB - zp / abs
trbt macro ;\1 = memory, \2 = flags
sty \1
load_flag \2
pha
lda zpt+1
plp
trb \1
php
cmp zpt+1
trap_ne ;accu was changed
pla
pha
ora #fz ;mask Z
cmp_flag \2|fz
trap_ne ;flags changed except Z
pla
and #fz
cmp zpt+2
trap_ne ;Z flag invalid
lda zpt+3
cmp zpt
trap_ne ;altered bits in memory wrong
endm
tsbt macro ;\1 = memory, \2 = flags
sty \1
load_flag \2
pha
lda zpt+1
plp
tsb \1
php
cmp zpt+1
trap_ne ;accu was changed
pla
pha
ora #fz ;mask Z
cmp_flag \2|fz
trap_ne ;flags changed except Z
pla
and #fz
cmp zpt+2
trap_ne ;Z flag invalid
lda zpt+4
cmp zpt
trap_ne ;altered bits in memory wrong
endm
ldx #$c0
ldy #0 ;op1 - memory save
; zpt ;op1 - memory modifiable
stz zpt+1 ;op2 - accu
; zpt+2 ;and flags
; zpt+3 ;memory after reset
; zpt+4 ;memory after set
tbt1 tya
and zpt+1 ;set Z by anding the 2 operands
php
pla
and #fz ;mask Z
sta zpt+2
tya ;reset op1 bits by op2
eor #$ff
ora zpt+1
eor #$ff
sta zpt+3
tya ;set op1 bits by op2
ora zpt+1
sta zpt+4
trbt zpt,$ff
trbt abst,$ff
trbt zpt,0
trbt abst,0
tsbt zpt,$ff
tsbt abst,$ff
tsbt zpt,0
tsbt abst,0
iny ;iterate op1
bne tbt3
inc zpt+1 ;iterate op2
beq tbt2
tbt3 jmp tbt1
tbt2
cpx #$c0
trap_ne ;x altered during test
tsx
cpx #$ff
trap_ne ;sp push/pop mismatch
next_test
if rkwl_wdc_op = 1
; testing RMB, SMB - zp
rmbt macro ;\1 = bitnum
lda #$ff
sta zpt
set_a $a5,0
rmb \1,zpt
tst_a $a5,0
lda zpt
cmp #$ff-(1<<\1)
trap_ne ;wrong bits set or cleared
lda #1<<\1
sta zpt
set_a $5a,$ff
rmb \1,zpt
tst_a $5a,$ff
lda zpt
trap_ne ;wrong bits set or cleared
endm
smbt macro ;\1 = bitnum
lda #$ff-(1<<\1)
sta zpt
set_a $a5,0
smb \1,zpt
tst_a $a5,0
lda zpt
cmp #$ff
trap_ne ;wrong bits set or cleared
lda #0
sta zpt
set_a $5a,$ff
smb \1,zpt
tst_a $5a,$ff
lda zpt
cmp #1<<\1
trap_ne ;wrong bits set or cleared
endm
ldx #$ba ;protect x & y
ldy #$d0
rmbt 0
rmbt 1
rmbt 2
rmbt 3
rmbt 4
rmbt 5
rmbt 6
rmbt 7
smbt 0
smbt 1
smbt 2
smbt 3
smbt 4
smbt 5
smbt 6
smbt 7
cpx #$ba
trap_ne ;x altered during test
cpy #$d0
trap_ne ;y altered during test
tsx
cpx #$ff
trap_ne ;sp push/pop mismatch
next_test
endif
; testing CMP - (zp)
ldx #$de ;protect x & y
ldy #$ad
set_a $80,0
cmp (ind1+8)
tst_a $80,fc
set_a $7f,0
cmp (ind1+8)
tst_a $7f,fzc
set_a $7e,0
cmp (ind1+8)
tst_a $7e,fn
set_a $80,$ff
cmp (ind1+8)
tst_a $80,~fnz
set_a $7f,$ff
cmp (ind1+8)
tst_a $7f,~fn
set_a $7e,$ff
cmp (ind1+8)
tst_a $7e,~fzc
cpx #$de
trap_ne ;x altered during test
cpy #$ad
trap_ne ;y altered during test
tsx
cpx #$ff
trap_ne ;sp push/pop mismatch
next_test
; testing logical instructions - AND EOR ORA (zp)
ldx #$42 ;protect x & y
ldy #0 ;AND
lda indAN ;set indirect address
sta zpt
lda indAN+1
sta zpt+1
tand1
set_ay absANa,0
and (zpt)
tst_ay absrlo,absflo,0
inc zpt
iny
cpy #4
bne tand1
dey
dec zpt
tand2
set_ay absANa,$ff
and (zpt)
tst_ay absrlo,absflo,$ff-fnz
dec zpt
dey
bpl tand2
ldy #0 ;EOR
lda indEO ;set indirect address
sta zpt
lda indEO+1
sta zpt+1
teor1
set_ay absEOa,0
eor (zpt)
tst_ay absrlo,absflo,0
inc zpt
iny
cpy #4
bne teor1
dey
dec zpt
teor2
set_ay absEOa,$ff
eor (zpt)
tst_ay absrlo,absflo,$ff-fnz
dec zpt
dey
bpl teor2
ldy #0 ;ORA
lda indOR ;set indirect address
sta zpt
lda indOR+1
sta zpt+1
tora1
set_ay absORa,0
ora (zpt)
tst_ay absrlo,absflo,0
inc zpt
iny
cpy #4
bne tora1
dey
dec zpt
tora2
set_ay absORa,$ff
ora (zpt)
tst_ay absrlo,absflo,$ff-fnz
dec zpt
dey
bpl tora2
cpx #$42
trap_ne ;x altered during test
tsx
cpx #$ff
trap_ne ;sp push/pop mismatch
next_test
if I_flag = 3
cli
endif
; full binary add/subtract test - (zp) only
; iterates through all combinations of operands and carry input
; uses increments/decrements to predict result & result flags
cld
ldx #ad2 ;for indexed test
ldy #$ff ;max range
lda #0 ;start with adding zeroes & no carry
sta adfc ;carry in - for diag
sta ad1 ;operand 1 - accumulator
sta ad2 ;operand 2 - memory or immediate
sta ada2 ;non zp
sta adrl ;expected result bits 0-7
sta adrh ;expected result bit 8 (carry out)
lda #$ff ;complemented operand 2 for subtract
sta sb2
sta sba2 ;non zp
lda #2 ;expected Z-flag
sta adrf
tadd clc ;test with carry clear
jsr chkadd
inc adfc ;now with carry
inc adrl ;result +1
php ;save N & Z from low result
php
pla ;accu holds expected flags
and #$82 ;mask N & Z
plp
bne tadd1
inc adrh ;result bit 8 - carry
tadd1 ora adrh ;merge C to expected flags
sta adrf ;save expected flags except overflow
sec ;test with carry set
jsr chkadd
dec adfc ;same for operand +1 but no carry
inc ad1
bne tadd ;iterate op1
lda #0 ;preset result to op2 when op1 = 0
sta adrh
inc ada2
inc ad2
php ;save NZ as operand 2 becomes the new result
pla
and #$82 ;mask N00000Z0
sta adrf ;no need to check carry as we are adding to 0
dec sb2 ;complement subtract operand 2
dec sba2
lda ad2
sta adrl
bne tadd ;iterate op2
cpx #ad2
trap_ne ;x altered during test
cpy #$ff
trap_ne ;y altered during test
tsx
cpx #$ff
trap_ne ;sp push/pop mismatch
next_test
; decimal add/subtract test
; *** WARNING - tests documented behavior only! ***
; only valid BCD operands are tested, the V flag is ignored
; although V is declared as beeing valid on the 65C02 it has absolutely
; no use in BCD math. No sign = no overflow!
; iterates through all valid combinations of operands and carry input
; uses increments/decrements to predict result & carry flag
sed
ldx #ad2 ;for indexed test
ldy #$ff ;max range
lda #$99 ;start with adding 99 to 99 with carry
sta ad1 ;operand 1 - accumulator
sta ad2 ;operand 2 - memory or immediate
sta ada2 ;non zp
sta adrl ;expected result bits 0-7
lda #1 ;set carry in & out
sta adfc ;carry in - for diag
sta adrh ;expected result bit 8 (carry out)
lda #$81 ;set N & C (99 + 99 + C = 99 + C)
sta adrf
lda #0 ;complemented operand 2 for subtract
sta sb2
sta sba2 ;non zp
tdad sec ;test with carry set
jsr chkdad
dec adfc ;now with carry clear
lda adrl ;decimal adjust result
bne tdad1 ;skip clear carry & preset result 99 (9A-1)
dec adrh
lda #$99
sta adrl
bne tdad3
tdad1 and #$f ;lower nibble mask
bne tdad2 ;no decimal adjust needed
dec adrl ;decimal adjust (?0-6)
dec adrl
dec adrl
dec adrl
dec adrl
dec adrl
tdad2 dec adrl ;result -1
tdad3 php ;save valid flags
pla
and #$82 ;N-----Z-
ora adrh ;N-----ZC
sta adrf
clc ;test with carry clear
jsr chkdad
inc adfc ;same for operand -1 but with carry
lda ad1 ;decimal adjust operand 1
beq tdad5 ;iterate operand 2
and #$f ;lower nibble mask
bne tdad4 ;skip decimal adjust
dec ad1 ;decimal adjust (?0-6)
dec ad1
dec ad1
dec ad1
dec ad1
dec ad1
tdad4 dec ad1 ;operand 1 -1
jmp tdad ;iterate op1
tdad5 lda #$99 ;precharge op1 max
sta ad1
lda ad2 ;decimal adjust operand 2
beq tdad7 ;end of iteration
and #$f ;lower nibble mask
bne tdad6 ;skip decimal adjust
dec ad2 ;decimal adjust (?0-6)
dec ad2
dec ad2
dec ad2
dec ad2
dec ad2
inc sb2 ;complemented decimal adjust for subtract (?9+6)
inc sb2
inc sb2
inc sb2
inc sb2
inc sb2
tdad6 dec ad2 ;operand 2 -1
inc sb2 ;complemented operand for subtract
lda sb2
sta sba2 ;copy as non zp operand
lda ad2
sta ada2 ;copy as non zp operand
sta adrl ;new result since op1+carry=00+carry +op2=op2
php ;save flags
pla
and #$82 ;N-----Z-
ora #1 ;N-----ZC
sta adrf
inc adrh ;result carry
jmp tdad ;iterate op2
tdad7 cpx #ad2
trap_ne ;x altered during test
cpy #$ff
trap_ne ;y altered during test
tsx
cpx #$ff
trap_ne ;sp push/pop mismatch
cld
lda test_case
cmp #test_num
trap_ne ;previous test is out of sequence
lda #$f0 ;mark opcode testing complete
sta test_case
; final RAM integrity test
; verifies that none of the previous tests has altered RAM outside of the
; designated write areas.
check_ram
; *** DEBUG INFO ***
; to debug checksum errors uncomment check_ram in the next_test macro to
; narrow down the responsible opcode.
; may give false errors when monitor, OS or other background activity is
; allowed during previous tests.
; S U C C E S S ************************************************
; -------------
success ;if you get here everything went well
; -------------
; S U C C E S S ************************************************
jmp start ;run again
; core subroutine of the decimal add/subtract test
; *** WARNING - tests documented behavior only! ***
; only valid BCD operands are tested, V flag is ignored
; iterates through all valid combinations of operands and carry input
; uses increments/decrements to predict result & carry flag
chkdad
; decimal ADC / SBC zp
php ;save carry for subtract
lda ad1
adc ad2 ;perform add
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
php ;save carry for next add
lda ad1
sbc sb2 ;perform subtract
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
; decimal ADC / SBC abs
php ;save carry for subtract
lda ad1
adc ada2 ;perform add
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
php ;save carry for next add
lda ad1
sbc sba2 ;perform subtract
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
; decimal ADC / SBC #
php ;save carry for subtract
lda ad2
sta ex_adci+1 ;set ADC # operand
lda ad1
jsr ex_adci ;execute ADC # in RAM
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
php ;save carry for next add
lda sb2
sta ex_sbci+1 ;set SBC # operand
lda ad1
jsr ex_sbci ;execute SBC # in RAM
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
; decimal ADC / SBC zp,x
php ;save carry for subtract
lda ad1
adc 0,x ;perform add
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
php ;save carry for next add
lda ad1
sbc sb2-ad2,x ;perform subtract
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
; decimal ADC / SBC abs,x
php ;save carry for subtract
lda ad1
adc ada2-ad2,x ;perform add
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
php ;save carry for next add
lda ad1
sbc sba2-ad2,x ;perform subtract
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
; decimal ADC / SBC abs,y
php ;save carry for subtract
lda ad1
adc ada2-$ff,y ;perform add
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
php ;save carry for next add
lda ad1
sbc sba2-$ff,y ;perform subtract
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
; decimal ADC / SBC (zp,x)
php ;save carry for subtract
lda ad1
adc (lo adi2-ad2,x) ;perform add
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
php ;save carry for next add
lda ad1
sbc (lo sbi2-ad2,x) ;perform subtract
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
; decimal ADC / SBC (abs),y
php ;save carry for subtract
lda ad1
adc (adiy2),y ;perform add
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
php ;save carry for next add
lda ad1
sbc (sbiy2),y ;perform subtract
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
; decimal ADC / SBC (zp)
php ;save carry for subtract
lda ad1
adc (adi2) ;perform add
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
php ;save carry for next add
lda ad1
sbc (sbi2) ;perform subtract
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$83 ;mask N-----ZC
cmp adrf
trap_ne ;bad flags
plp
rts
; core subroutine of the full binary add/subtract test
; iterates through all combinations of operands and carry input
; uses increments/decrements to predict result & result flags
chkadd lda adrf ;add V-flag if overflow
and #$83 ;keep N-----ZC / clear V
pha
lda ad1 ;test sign unequal between operands
eor ad2
bmi ckad1 ;no overflow possible - operands have different sign
lda ad1 ;test sign equal between operands and result
eor adrl
bpl ckad1 ;no overflow occured - operand and result have same sign
pla
ora #$40 ;set V
pha
ckad1 pla
sta adrf ;save expected flags
; binary ADC / SBC (zp)
php ;save carry for subtract
lda ad1
adc (adi2) ;perform add
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$c3 ;mask NV----ZC
cmp adrf
trap_ne ;bad flags
plp
php ;save carry for next add
lda ad1
sbc (sbi2) ;perform subtract
php
cmp adrl ;check result
trap_ne ;bad result
pla ;check flags
and #$c3 ;mask NV----ZC
cmp adrf
trap_ne ;bad flags
plp
rts
; target for the jump indirect test
ji_adr dw test_ji
dw ji_ret
dey
dey
test_ji
php ;either SP or Y count will fail, if we do not hit
dey
dey
dey
plp
trap_cs ;flags loaded?
trap_vs
trap_mi
trap_eq
cmp #'I' ;registers loaded?
trap_ne
cpx #'N'
trap_ne
cpy #('D'-3)
trap_ne
pha ;save a,x
txa
pha
tsx
cpx #$fd ;check SP
trap_ne
pla ;restore x
tax
set_stat $ff
pla ;restore a
inx ;return registers with modifications
eor #$aa ;N=1, V=1, Z=0, C=1
jmp (ji_tab+2)
nop
nop
trap ;runover protection
jmp start ;catastrophic error - cannot continue
; target for the jump indirect test
jxi_adr dw trap_ind
dw trap_ind
dw test_jxi ;+4
dw jxi_ret ;+6
dw trap_ind
dw trap_ind
dey
dey
test_jxi
php ;either SP or Y count will fail, if we do not hit
dey
dey
dey
plp
trap_cs ;flags loaded?
trap_vs
trap_mi
trap_eq
cmp #'X' ;registers loaded?
trap_ne
cpx #4
trap_ne
cpy #('I'-3)
trap_ne
pha ;save a,x
txa
pha
tsx
cpx #$fd ;check SP
trap_ne
pla ;restore x
tax
set_stat $ff
pla ;restore a
inx ;return registers with modifications
inx
eor #$aa ;N=1, V=1, Z=0, C=1
jmp (jxi_tab,x)
nop
nop
trap ;runover protection
jmp start ;catastrophic error - cannot continue
; JMP (abs,x) with bad x
nop
nop
trap_ind
nop
nop
trap ;near miss indexed indirect jump
jmp start ;catastrophic error - cannot continue
;trap in case of unexpected IRQ, NMI, BRK, RESET
nmi_trap
trap ;check stack for conditions at NMI
jmp start ;catastrophic error - cannot continue
res_trap
trap ;unexpected RESET
jmp start ;catastrophic error - cannot continue
dey
dey
irq_trap ;BRK test or unextpected BRK or IRQ
php ;either SP or Y count will fail, if we do not hit
dey
dey
dey
;next traps could be caused by unexpected BRK or IRQ
;check stack for BREAK and originating location
;possible jump/branch into weeds (uninitialized space)
cmp #$ff-'B' ;BRK pass 2 registers loaded?
beq break2
cmp #'B' ;BRK pass 1 registers loaded?
trap_ne
cpx #'R'
trap_ne
cpy #'K'-3
trap_ne
sta irq_a ;save registers during break test
stx irq_x
tsx ;test break on stack
lda $102,x
cmp_flag 0 ;break test should have B=1 & unused=1 on stack
trap_ne ;possible no break flag on stack
pla
cmp_flag intdis ;should have added interrupt disable
trap_ne
tsx
cpx #$fc ;sp -3? (return addr, flags)
trap_ne
lda $1ff ;propper return on stack
cmp #hi(brk_ret0)
trap_ne
lda $1fe
cmp #lo(brk_ret0)
trap_ne
load_flag $ff
pha
ldx irq_x
inx ;return registers with modifications
lda irq_a
eor #$aa
plp ;N=1, V=1, Z=1, C=1 but original flags should be restored
rti
trap ;runover protection
jmp start ;catastrophic error - cannot continue
break2 ;BRK pass 2
cpx #$ff-'R'
trap_ne
cpy #$ff-'K'-3
trap_ne
sta irq_a ;save registers during break test
stx irq_x
tsx ;test break on stack
lda $102,x
cmp_flag $ff ;break test should have B=1
trap_ne ;possibly no break flag on stack
pla
cmp_flag $ff-decmode ;actual passed flags should have decmode cleared
trap_ne
tsx
cpx #$fc ;sp -3? (return addr, flags)
trap_ne
lda $1ff ;propper return on stack
cmp #hi(brk_ret1)
trap_ne
lda $1fe
cmp #lo(brk_ret1)
trap_ne
load_flag intdis
pha
ldx irq_x
inx ;return registers with modifications
lda irq_a
eor #$aa
plp ;N=0, V=0, Z=0, C=0 but original flags should be restored
rti
trap ;runover protection
jmp start ;catastrophic error - cannot continue
if report = 1
include "report.i65"
endif
;copy of data to initialize BSS segment
if load_data_direct != 1
zp_init
zp1_ db $c3,$82,$41,0 ;test patterns for LDx BIT ROL ROR ASL LSR
zp7f_ db $7f ;test pattern for compare
;logical zeropage operands
zpOR_ db 0,$1f,$71,$80 ;test pattern for OR
zpAN_ db $0f,$ff,$7f,$80 ;test pattern for AND
zpEO_ db $ff,$0f,$8f,$8f ;test pattern for EOR
;indirect addressing pointers
ind1_ dw abs1 ;indirect pointer to pattern in absolute memory
dw abs1+1
dw abs1+2
dw abs1+3
dw abs7f
inw1_ dw abs1-$f8 ;indirect pointer for wrap-test pattern
indt_ dw abst ;indirect pointer to store area in absolute memory
dw abst+1
dw abst+2
dw abst+3
inwt_ dw abst-$f8 ;indirect pointer for wrap-test store
indAN_ dw absAN ;indirect pointer to AND pattern in absolute memory
dw absAN+1
dw absAN+2
dw absAN+3
indEO_ dw absEO ;indirect pointer to EOR pattern in absolute memory
dw absEO+1
dw absEO+2
dw absEO+3
indOR_ dw absOR ;indirect pointer to OR pattern in absolute memory
dw absOR+1
dw absOR+2
dw absOR+3
;add/subtract indirect pointers
adi2_ dw ada2 ;indirect pointer to operand 2 in absolute memory
sbi2_ dw sba2 ;indirect pointer to complemented operand 2 (SBC)
adiy2_ dw ada2-$ff ;with offset for indirect indexed
sbiy2_ dw sba2-$ff
zp_end
if (zp_end - zp_init) != (zp_bss_end - zp_bss)
;force assembler error if size is different
ERROR ERROR ERROR ;mismatch between bss and zeropage data
endif
data_init
ex_adc_ adc #0 ;execute immediate opcodes
rts
ex_sbc_ sbc #0 ;execute immediate opcodes
rts
abs1_ db $c3,$82,$41,0 ;test patterns for LDx BIT ROL ROR ASL LSR
abs7f_ db $7f ;test pattern for compare
;loads
fLDx_ db fn,fn,0,fz ;expected flags for load
;shifts
rASL_ ;expected result ASL & ROL -carry
rROL_ db $86,$04,$82,0 ; "
rROLc_ db $87,$05,$83,1 ;expected result ROL +carry
rLSR_ ;expected result LSR & ROR -carry
rROR_ db $61,$41,$20,0 ; "
rRORc_ db $e1,$c1,$a0,$80 ;expected result ROR +carry
fASL_ ;expected flags for shifts
fROL_ db fnc,fc,fn,fz ;no carry in
fROLc_ db fnc,fc,fn,0 ;carry in
fLSR_
fROR_ db fc,0,fc,fz ;no carry in
fRORc_ db fnc,fn,fnc,fn ;carry in
;increments (decrements)
rINC_ db $7f,$80,$ff,0,1 ;expected result for INC/DEC
fINC_ db 0,fn,fn,fz,0 ;expected flags for INC/DEC
;logical memory operand
absOR_ db 0,$1f,$71,$80 ;test pattern for OR
absAN_ db $0f,$ff,$7f,$80 ;test pattern for AND
absEO_ db $ff,$0f,$8f,$8f ;test pattern for EOR
;logical accu operand
absORa_ db 0,$f1,$1f,0 ;test pattern for OR
absANa_ db $f0,$ff,$ff,$ff ;test pattern for AND
absEOa_ db $ff,$f0,$f0,$0f ;test pattern for EOR
;logical results
absrlo_ db 0,$ff,$7f,$80
absflo_ db fz,fn,0,fn
data_end
if (data_end - data_init) != (data_bss_end - data_bss)
;force assembler error if size is different
ERROR ERROR ERROR ;mismatch between bss and data
endif
vec_init
dw nmi_trap
dw res_trap
dw irq_trap
vec_bss equ $fffa
endif ;end of RAM init data
; code at end of image due to the need to add blank space as required
if ($ff & (ji_ret - * - 2)) < ($ff & (jxi_ret - * - 2))
; JMP (abs) when $xxff and $xx00 are from same page
ds lo(ji_ret - * - 2)
nop
nop
ji_px nop ;low address byte matched with ji_ret
nop
trap ;jmp indirect page cross bug
; JMP (abs,x) when $xxff and $xx00 are from same page
ds lo(jxi_ret - * - 2)
nop
nop
jxi_px nop ;low address byte matched with jxi_ret
nop
trap ;jmp indexed indirect page cross bug
else
; JMP (abs,x) when $xxff and $xx00 are from same page
ds lo(jxi_ret - * - 2)
nop
nop
jxi_px nop ;low address byte matched with jxi_ret
nop
trap ;jmp indexed indirect page cross bug
; JMP (abs) when $xxff and $xx00 are from same page
ds lo(ji_ret - * - 2)
nop
nop
ji_px nop ;low address byte matched with ji_ret
nop
trap ;jmp indirect page cross bug
endif
if (load_data_direct = 1) & (ROM_vectors = 1)
org $fffa ;vectors
dw nmi_trap
dw res_trap
dw irq_trap
endif
end start