acme/ACME_Lib/cbm/mflpt.a

88 lines
2.9 KiB
Plaintext

;ACME 0.94.5
!ifdef lib_cbm_mflpt_a !eof
lib_cbm_mflpt_a = 1
; CAUTION! The Commodore BASIC interpreter uses two different formats for
; handling floating-point values, so do not confuse them:
; The "float registers" fac1 and fac2 (actually structures in zero page) use a
; six-byte format commonly known as "flpt" (floating point).
; When storing values in variables (or reading values from ROM), a compressed
; five-byte format is used, commonly known as "mflpt" (memory floating point).
; This file contains a macro for writing floating point numbers in the five-byte
; "mflpt" format, where the sign bit is packed into the mantissa.
; Several interpreter functions use this format (see <cbm/c64/float.a>).
; Use the macro like this:
; +mflpt 3.1415926 ; each use will take up five bytes of memory
; now for the technical stuff (stop reading right now if you value your sanity)
; five-byte layout in memory:
; eeeeeeee smmmmmmm mmmmmmmm mmmmmmmm mmmmmmmm ; eight bits exponent, 32 bits mantissa with sign bit overlay
; exponent byte:
; exponent has a bias of 128 (128 means the decimal point is right before the mantissa's leading digit)
; if exponent is zero, number value is considered to be zero, regardless of mantissa
; exponents 1..128 are for values < 1
; exponents 129..255 are for values >= 1
; mantissa:
; mantissa is stored big-endian(!)
; the mantissa's mandatory leading '1' is replaced by the sign bit
; so logically, this is equivalent to:
; + .1mmmmmmm mmmmmmmm mmmmmmmm mmmmmmmm * 2^(eeeeeeee - 128) if sign bit is 0
; - .1mmmmmmm mmmmmmmm mmmmmmmm mmmmmmmm * 2^(eeeeeeee - 128) if sign bit is 1
; this is ugly, but it gets the job done
; (if it's stupid, but it works, then it's not stupid)
!macro mflpt @value {
!set @float = float(@value) ; make sure to do passes until value is defined
!ifndef @float {
!by $ff, $ff, $ff, $ff, $ff ; five place holder bytes
} else {
; value is defined, so split up into sign and non-negative value
!if @float < 0 {
!set @sign = $80
!set @float = -@float
} else {
!set @sign = $00
}
!if @float = 0 {
!by 0, 0, 0, 0, 0 ; five zeroes (zero is represented by all bits zero)
} else {
; split up into exponent and mantissa
!set @exponent = 128 + 32 ; 128 is cbm's bias, 32 is this algo's bias
; if mantissa is too large, shift right and adjust exponent
!do while @float >= (2.0 ^ 32.0) {
!set @float = @float >> 1
!set @exponent = @exponent + 1
}
; if mantissa is too small, shift left and adjust exponent
!do while @float < (2.0 ^ 31.0) {
!set @float = @float << 1
!set @exponent = @exponent - 1
}
!if @exponent < 1 {
!warn "MFLPT underflow, using zero instead"
!set @float = 0
!set @exponent = 0
!set @sign = 0
}
!if @exponent > 255 {
!error "MFLPT overflow"
}
!by @exponent
!by (127 & int(@float >> 24)) | @sign
!by 255 & int(@float >> 16)
!by 255 & int(@float >> 8)
!by 255 & int(@float)
}
}
}