cc65/libsrc/c64/c64-joymouse.s

;
; Driver for a "joystick mouse".
;
; Ullrich von Bassewitz, 2004-03-29, 2009-09-26
; 2010-02-08, Greg King
;
; The driver prevents the keyboard from interfering by changing the
; keyboard's output port into an input port while the driver reads its
; controller device.  That disables a wire that is left active by the
; Kernal.  That wire is used by the STOP-key to break out of BASIC
; programs -- CC65 programs don't use that feature.  The wire is shared
; by these keys: STOP, "Q", Commodore, Space, "2", CTRL, Left-Arrow, and
; "1".  I listed them, in order, from bit 7 over to bit 0.  The
; rightmost five keys can look like joystick switches.
;
; The driver prevents the mouse/joystick from interfering by "blinding"
; the keyboard scanner while any button/switch is active.  It changes
; the input port into an output port, then stores all zero-bits in that
; port's latch.  Reading from an output port sees the bitwise-AND of the
; latch and the input signals.  Therefore, the scanner thinks that eight
; keys are being pushed at the same time.  It doesn't know what to do
; about that condition; so, it does nothing.  The driver lets the
; scanner see normally, again, when no buttons/switches are active.
;

        .include        "zeropage.inc"
        .include        "mouse-kernel.inc"
	.include	"c64.inc"

        .macpack        generic

; ------------------------------------------------------------------------
; Header. Includes jump table

.segment        "JUMPTABLE"

HEADER:

; Driver signature

        .byte   $6d, $6f, $75           ; "mou"
        .byte   MOUSE_API_VERSION       ; Mouse driver API version number

; Jump table.

        .addr   INSTALL
        .addr   UNINSTALL
        .addr   HIDE
        .addr   SHOW
        .addr   SETBOX
        .addr   GETBOX
        .addr   MOVE
        .addr   BUTTONS
        .addr   POS
        .addr   INFO
        .addr   IOCTL
        .addr   IRQ

; Mouse driver flags

        .byte   MOUSE_FLAG_LATE_IRQ

; Callback table, set by the kernel before INSTALL is called

CHIDE:  jmp     $0000                   ; Hide the cursor
CSHOW:  jmp     $0000                   ; Show the cursor
CMOVEX: jmp     $0000                   ; Move the cursor to X coord
CMOVEY: jmp     $0000                   ; Move the cursor to Y coord


;----------------------------------------------------------------------------
; Constants

SCREEN_HEIGHT   = 200
SCREEN_WIDTH    = 320

.enum   JOY
        UP      = $01
        DOWN    = $02
        LEFT    = $04
        RIGHT   = $08
        FIRE    = $10
.endenum

;----------------------------------------------------------------------------
; Global variables. The bounding box values are sorted so that they can be
; written with the least effort in the SETBOX and GETBOX routines, so don't
; reorder them.

.bss

Vars:
YPos:           .res    2               ; Current mouse position, Y
XPos:           .res    2               ; Current mouse position, X
XMin:		.res  	2	     	; X1 value of bounding box
YMin:		.res  	2	     	; Y1 value of bounding box
XMax:		.res  	2	     	; X2 value of bounding box
YMax:		.res	2	     	; Y2 value of bounding box
Buttons:	.res  	1		; Button mask

; Temporary value used in the int handler

Temp:           .res    1

; Default values for above variables

.rodata

.proc   DefVars
        .word   SCREEN_HEIGHT/2         ; YPos
        .word   SCREEN_WIDTH/2          ; XPos
        .word   0                       ; XMin
        .word   0                       ; YMin
        .word   SCREEN_WIDTH            ; XMax
        .word   SCREEN_HEIGHT           ; YMax
	.byte	0			; Buttons
.endproc

.code

;----------------------------------------------------------------------------
; INSTALL routine. Is called after the driver is loaded into memory. If
; possible, check if the hardware is present.
; Must return an MOUSE_ERR_xx code in a/x.

INSTALL:

; Initialize variables. Just copy the default stuff over

        ldx     #.sizeof(DefVars)-1
@L1:    lda     DefVars,x
        sta     Vars,x
        dex
        bpl     @L1

; Be sure the mouse cursor is invisible and at the default location. We
; need to do that here, because our mouse interrupt handler doesn't set the
; mouse position if it hasn't changed.

        sei
        jsr     CHIDE
        lda     XPos
        ldx     XPos+1
        jsr     CMOVEX
        lda     YPos
        ldx     YPos+1
        jsr     CMOVEY
        cli

; Done, return zero (= MOUSE_ERR_OK)

        ldx     #$00
        txa
        rts

;----------------------------------------------------------------------------
; UNINSTALL routine. Is called before the driver is removed from memory.
; No return code required (the driver is removed from memory on return).

UNINSTALL       = HIDE                  ; Hide cursor on exit

;----------------------------------------------------------------------------
; HIDE routine. Is called to hide the mouse pointer. The mouse kernel manages
; a counter for calls to show/hide, and the driver entry point is only called
; if the mouse is currently visible and should get hidden. For most drivers,
; no special action is required besides hiding the mouse cursor.
; No return code required.

HIDE:   sei
        jsr     CHIDE
        cli
        rts

;----------------------------------------------------------------------------
; SHOW routine. Is called to show the mouse pointer. The mouse kernel manages
; a counter for calls to show/hide, and the driver entry point is only called
; if the mouse is currently hidden and should become visible. For most drivers,
; no special action is required besides enabling the mouse cursor.
; No return code required.

SHOW:   sei
        jsr     CSHOW
        cli
        rts

;----------------------------------------------------------------------------
; SETBOX: Set the mouse bounding box. The parameters are passed as they come
; from the C program, that is, a pointer to a mouse_box struct in a/x.
; No checks are done if the mouse is currently inside the box, this is the job
; of the caller. It is not necessary to validate the parameters, trust the
; caller and save some code here. No return code required.

SETBOX: sta     ptr1
        stx     ptr1+1                  ; Save data pointer

        ldy     #.sizeof (MOUSE_BOX)-1
        sei

@L1:    lda     (ptr1),y
        sta     XMin,y
        dey
        bpl     @L1

        cli
       	rts

;----------------------------------------------------------------------------
; GETBOX: Return the mouse bounding box. The parameters are passed as they
; come from the C program, that is, a pointer to a mouse_box struct in a/x.

GETBOX: sta     ptr1
        stx     ptr1+1                  ; Save data pointer

        ldy     #.sizeof (MOUSE_BOX)-1

@L1:    lda     XMin,y
        sta     (ptr1),y
        dey
        bpl     @L1

       	rts

;----------------------------------------------------------------------------
; MOVE: Move the mouse to a new position. The position is passed as it comes
; from the C program, that is: X on the stack and Y in a/x. The C wrapper will
; remove the parameter from the stack on return.
; No checks are done if the new position is valid (within the bounding box or
; the screen). No return code required.
;

MOVE:   sei                             ; No interrupts

        sta     YPos
        stx     YPos+1                  ; New Y position
        jsr     CMOVEY                  ; Set it

        ldy     #$01
        lda     (sp),y
        sta     XPos+1
        tax
        dey
        lda     (sp),y
        sta     XPos                    ; New X position

        jsr     CMOVEX			; Move the cursor

	cli                             ; Allow interrupts
       	rts

;----------------------------------------------------------------------------
; BUTTONS: Return the button mask in a/x.

BUTTONS:
	lda	Buttons
	ldx	#$00
	rts

;----------------------------------------------------------------------------
; POS: Return the mouse position in the MOUSE_POS struct pointed to by ptr1.
; No return code required.

POS:    ldy    	#MOUSE_POS::XCOORD      ; Structure offset

	sei	    			; Disable interrupts
	lda     XPos			; Transfer the position
	sta	(ptr1),y
	lda	XPos+1
	iny
	sta	(ptr1),y
      	lda	YPos
        iny
        sta     (ptr1),y
	lda	YPos+1
	cli	    			; Enable interrupts

        iny
        sta     (ptr1),y                ; Store last byte

    	rts	    			; Done

;----------------------------------------------------------------------------
; INFO: Returns mouse position and current button mask in the MOUSE_INFO
; struct pointed to by ptr1. No return code required.
;
; We're cheating here to keep the code smaller: The first fields of the
; mouse_info struct are identical to the mouse_pos struct, so we will just
; call _mouse_pos to initialize the struct pointer and fill the position
; fields.

INFO:   jsr	POS

; Fill in the button state

       	lda	Buttons
    	ldy	#MOUSE_INFO::BUTTONS
    	sta	(ptr1),y

      	rts

;----------------------------------------------------------------------------
; IOCTL: Driver defined entry point. The wrapper will pass a pointer to ioctl
; specific data in ptr1, and the ioctl code in A.
; Must return an error code in a/x.
;

IOCTL:  lda     #<MOUSE_ERR_INV_IOCTL     ; We don't support ioclts for now
        ldx     #>MOUSE_ERR_INV_IOCTL
        rts

;----------------------------------------------------------------------------
; IRQ: Irq handler entry point. Called as a subroutine but in IRQ context
; (so be careful). The routine MUST return carry set if the interrupt has been
; 'handled' - which means that the interrupt source is gone. Otherwise it
; MUST return carry clear.
;

; Avoid crosstalk between the keyboard and a joystick.

IRQ:	ldy	#%00000000		; Set ports A and B to input
	sty	CIA1_DDRB
	sty	CIA1_DDRA		; Keyboard won't look like joystick
	lda	CIA1_PRB		; Read Control-Port 1
	dec	CIA1_DDRA		; Set port A back to output
	eor	#%11111111		; Bit goes up when switch goes down
	beq	@Save			;(bze)
	dec	CIA1_DDRB		; Joystick won't look like keyboard
	sty	CIA1_PRB		; Set "all keys pushed"
@Save:  sta     Temp

; Check for a pressed button and place the result into Buttons

        ldx     #$00                    ; Assume no button pressed
        and     #JOY::FIRE              ; Check fire button
        beq     @L0                     ; Jump if not pressed
        ldx     #MOUSE_BTN_LEFT         ; Left (only) button is pressed
@L0:    stx     Buttons

; Check left/right

        lda     Temp                    ; Read joystick #0
       	and    	#(JOY::LEFT | JOY::RIGHT)
        beq     @SkipX			;

; We will cheat here and rely on the fact that either the left, OR the right
; bit can be active

       	and     #JOY::RIGHT             ; Check RIGHT bit
       	bne	@Right
      	lda	#$FF
      	tax
      	bne	@AddX                   ; Branch always
@Right:	lda	#$01
      	ldx	#$00

; Calculate the new X coordinate (--> a/y)

@AddX:  add     XPos
      	tay	      			; Remember low byte
      	txa
      	adc	XPos+1
    	tax

; Limit the X coordinate to the bounding box

   	cpy	XMin
   	sbc	XMin+1
   	bpl	@L1
       	ldy    	XMin
       	ldx	XMin+1
    	jmp	@L2
@L1:	txa

    	cpy	XMax
    	sbc	XMax+1
    	bmi	@L2
    	ldy	XMax
    	ldx	XMax+1
@L2:	sty	XPos
   	stx	XPos+1

; Move the mouse pointer to the new X pos

        tya
        jsr     CMOVEX

; Calculate the Y movement vector

@SkipX: lda     Temp                    ; Read joystick #0
       	and    	#(JOY::UP | JOY::DOWN)  ; Check up/down
        beq     @SkipY		 	;

; We will cheat here and rely on the fact that either the up, OR the down
; bit can be active

       	lsr     a                       ; Check UP bit
       	bcc	@Down
      	lda	#$FF
      	tax
      	bne	@AddY
@Down:	lda	#$01
    	ldx	#$00

; Calculate the new Y coordinate (--> a/y)

@AddY: 	add    	YPos
      	tay	      			; Remember low byte
      	txa
      	adc	YPos+1
    	tax

; Limit the Y coordinate to the bounding box

   	cpy	YMin
 	sbc	YMin+1
 	bpl	@L3
       	ldy    	YMin
       	ldx	YMin+1
    	jmp	@L4
@L3:	txa

    	cpy	YMax
    	sbc	YMax+1
    	bmi	@L4
    	ldy	YMax
    	ldx	YMax+1
@L4:	sty	YPos
 	stx	YPos+1

; Move the mouse pointer to the new X pos

        tya
        jsr     CMOVEY

; Done

@SkipY: clc                             ; Interrupt not handled
        rts