cc65/libsrc/apple2/apple2-40-48-16.s

;
; Graphics driver for the 40x48x16 mode on the Apple II
;
; Stefan Haubenthal <polluks@sdf.lonestar.org>
; Oliver Schmidt <ol.sc@web.de>
;

	.include	"zeropage.inc"

	.include	"tgi-kernel.inc"
	.include	"tgi-mode.inc"
	.include	"tgi-error.inc"
	.include	"apple2.inc"

; ------------------------------------------------------------------------

; Zero page stuff

H2	:=	$2C
COLOR	:=	$30

; ROM entry points

TEXT    :=	$F399
PLOT	:=	$F800
HLINE	:=	$F819
CLRSC2	:=	$F838
SETCOL	:=	$F864
SCRN	:=	$F871
SETGR	:=	$FB40
HOME	:=	$FC58

; Used for passing parameters to the driver

X1	:=	ptr1
Y1	:=	ptr2
X2	:=	ptr3
Y2	:=	ptr4

; ------------------------------------------------------------------------

	.segment	"JUMPTABLE"

; Header. Includes jump table and constants.

; First part of the header is a structure that has a magic and defines the
; capabilities of the driver

	.byte	$74, $67, $69	; "tgi"
	.byte	TGI_API_VERSION	; TGI API version number
	.word	40		; X resolution
	.word	48		; Y resolution
	.byte	16		; Number of drawing colors
	.byte	1		; Number of screens available
	.byte	8		; System font X size
	.byte	8		; System font Y size
	.word   $100		; Aspect ratio

; Next comes the jump table. With the exception of IRQ, all entries must be
; valid and may point to an RTS for test versions (function not implemented).

       	.addr   INSTALL
       	.addr   UNINSTALL
       	.addr   INIT
       	.addr   DONE
       	.addr   GETERROR
       	.addr   CONTROL
       	.addr   CLEAR
       	.addr   SETVIEWPAGE
       	.addr   SETDRAWPAGE
       	.addr   SETCOLOR
       	.addr   SETPALETTE
       	.addr   GETPALETTE
       	.addr   GETDEFPALETTE
       	.addr   SETPIXEL
       	.addr   GETPIXEL
       	.addr   LINE
       	.addr   BAR
       	.addr   TEXTSTYLE
       	.addr   OUTTEXT
        .addr   0               ; IRQ entry is unused

; ------------------------------------------------------------------------

	.bss

ERROR:	.res	1		; Error code
MIX:	.res	1		; 4 lines of text

; ------------------------------------------------------------------------

	.rodata

DEFPALETTE: .byte $00, $01, $02, $03, $04, $05, $06, $07
	    .byte $08, $09, $0A, $0B, $0C, $0D, $0E, $0F

MAXY:	.byte 47, 39

; ------------------------------------------------------------------------

	.code

; INIT: Changes an already installed device from text mode to graphics mode.
; Note that INIT/DONE may be called multiple times while the driver
; is loaded, while INSTALL is only called once, so any code that is needed
; to initializes variables and so on must go here. Setting palette and
; clearing the screen is not needed because this is called by the graphics
; kernel later.
; The graphics kernel will never call INIT when a graphics mode is already
; active, so there is no need to protect against that.
; Must set an error code: YES
INIT:
	; Switch into graphics mode
	bit	$C082		; Switch in ROM
	jsr	SETGR
	bit	MIXCLR
	bit	$C080		; Switch in LC bank 2 for R/O

	; Done, reset the error code
	lda	#TGI_ERR_OK
	sta	ERROR
	sta	MIX

	; Fall through

; INSTALL routine. Is called after the driver is loaded into memory. May
; initialize anything that has to be done just once. Is probably empty
; most of the time.
; Must set an error code: NO
INSTALL:
	; Fall through

; UNINSTALL routine. Is called before the driver is removed from memory. May
; clean up anything done by INSTALL but is probably empty most of the time.
; Must set an error code: NO
UNINSTALL:
	; Fall through

; SETVIEWPAGE: Set the visible page. Called with the new page in A (0..n).
; The page number is already checked to be valid by the graphics kernel.
; Must set an error code: NO (will only be called if page ok)
SETVIEWPAGE:
	; Fall through

; SETDRAWPAGE: Set the drawable page. Called with the new page in A (0..n).
; The page number is already checked to be valid by the graphics kernel.
; Must set an error code: NO (will only be called if page ok)
SETDRAWPAGE:
	; Fall through

; TEXTSTYLE: Set the style used when calling OUTTEXT. Text scaling in X and Y
; direction is passend in X/Y, the text direction is passed in A.
; Must set an error code: NO
TEXTSTYLE:
	; Fall through

; OUTTEXT: Output text at X/Y = ptr1/ptr2 using the current color and the
; current text style. The text to output is given as a zero terminated
; string with address in ptr3.
; Must set an error code: NO
OUTTEXT:
	rts

; DONE: Will be called to switch the graphics device back into text mode.
; The graphics kernel will never call DONE when no graphics mode is active,
; so there is no need to protect against that.
; Must set an error code: NO
DONE:
	bit	$C082		; Switch in ROM
	jsr	TEXT
	jsr	HOME
	bit	$C080		; Switch in LC bank 2 for R/O
	rts

; GETERROR: Return the error code in A and clear it.
GETERROR:
	lda	ERROR
	ldx	#TGI_ERR_OK
	stx	ERROR
	rts

; CLEAR: Clears the screen.
; Must set an error code: NO
CLEAR:
	bit	$C082		; Switch in ROM
	lda	COLOR		; Save current drawing color
	pha
	ldx	MIX
	ldy	MAXY,x		; Max Y depends on 4 lines of text
	jsr	CLRSC2
	pla
	sta	COLOR		; Save current drawing color
	bit	$C080		; Switch in LC bank 2 for R/O
	rts

; SETCOLOR: Set the drawing color (in A). The new color is already checked
; to be in a valid range (0..maxcolor-1).
; Must set an error code: NO (will only be called if color ok)
SETCOLOR:
	bit	$C082		; Switch in ROM
	jsr	SETCOL
	bit	$C080		; Switch in LC bank 2 for R/O
	rts

; CONTROL: Platform/driver specific entry point.
; Must set an error code: YES
CONTROL:
	; Check data msb and code to be 0
	ora	ptr1+1
	bne	err

	; Check data lsb to be [0..1]
	lda	ptr1
	cmp	#1+1
	bcs	err
	bit	$C082		; Switch in ROM

	; Switch 4 lines of text
	tax
	.assert MIXCLR + 1 = MIXSET, error
	lda	MIXCLR,x	; No BIT absolute,X available

	; Save current switch setting
	txa
	sta	MIX
	bne	text

	; Clear 8 lines of graphics
	lda	COLOR		; Save current drawing color
	pha
	lda	#39		; Rightmost column
	sta	H2
	ldx	#40		; First line
:	txa
	ldy	#$00		; Leftmost column
	sty	COLOR		; Black
	jsr	HLINE		; Preserves X
	inx
	cpx	#47+1		; Last line
	bcc	:-
	pla
	sta	COLOR		; Save current drawing color
	bcs	:+		; Branch always

	; Clear 4 lines of text
text:	jsr	HOME
:	bit	$C080		; Switch in LC bank 2 for R/O

	; Done, reset the error code
	lda	#TGI_ERR_OK
	beq	:+		; Branch always
	
	; Done, set the error code
err:	lda	#TGI_ERR_INV_ARG
:	sta	ERROR
	rts

; SETPALETTE: Set the palette (not available with all drivers/hardware).
; A pointer to the palette is passed in ptr1. Must set an error if palettes
; are not supported
; Must set an error code: YES
SETPALETTE:
	lda	#TGI_ERR_INV_FUNC
	sta	ERROR
	rts

; GETPALETTE: Return the current palette in A/X. Even drivers that cannot
; set the palette should return the default palette here, so there's no
; way for this function to fail.
; Must set an error code: NO
GETPALETTE:
	; Fall through

; GETDEFPALETTE: Return the default palette for the driver in A/X. All
; drivers should return something reasonable here, even drivers that don't
; support palettes, otherwise the caller has no way to determine the colors
; of the (not changeable) palette.
; Must set an error code: NO (all drivers must have a default palette)
GETDEFPALETTE:
	lda	#<DEFPALETTE
	ldx	#>DEFPALETTE
	rts

; SETPIXEL: Draw one pixel at X1/Y1 = ptr1/ptr2 with the current drawing
; color. The coordinates passed to this function are never outside the
; visible screen area, so there is no need for clipping inside this function.
; Must set an error code: NO
SETPIXEL:
	bit	$C082		; Switch in ROM
	ldy	X1
	lda	Y1
	jsr	PLOT
	bit	$C080		; Switch in LC bank 2 for R/O
	rts

; GETPIXEL: Read the color value of a pixel and return it in A/X. The
; coordinates passed to this function are never outside the visible screen
; area, so there is no need for clipping inside this function.
GETPIXEL:
	bit	$C082		; Switch in ROM
	ldy	X1
	lda	Y1
	jsr	SCRN
	ldx	#$00
	bit	$C080		; Switch in LC bank 2 for R/O
	rts

; BAR: Draw a filled rectangle with the corners X1/Y1, X2/Y2, where
; X1/Y1 = ptr1/ptr2 and X2/Y2 = ptr3/ptr4 using the current drawing color.
; Contrary to most other functions, the graphics kernel will sort and clip
; the coordinates before calling the driver, so on entry the following
; conditions are valid:
;	X1 <= X2
;	Y1 <= Y2
;	(X1 >= 0) && (X1 < XRES)
;	(X2 >= 0) && (X2 < XRES)
;	(Y1 >= 0) && (Y1 < YRES)
;	(Y2 >= 0) && (Y2 < YRES)
; Must set an error code: NO
BAR:
	bit	$C082		; Switch in ROM
	lda	X2
	sta	H2
	inc	Y2
	ldx	Y1
:	txa
	ldy	X1
	jsr	HLINE		; Preserves X
	inx
	cpx	Y2
	bcc	:-
	bit	$C080		; Switch in LC bank 2 for R/O
	rts

; ------------------------------------------------------------------------

.include	"../tgi/tgidrv_line.inc"