There is no need to TryToSend before getting the character. We
send bytes during SER_PUT, and if interrupted during sending, we
still try to do it at the beginning of the next SER_PUT.
There's no target with more than one serial driver (and I don't see that change anytime soon) so it's a no-brainer to apply the standard driver concept to serial drivers.
On C64, VIC-20 and Plus/4, the conio library PLOT routine uses direct
calls into the Kernal, including the Kernal PLOT routine that we're
replacing. These were previously hardcoded addresses; we change these
to use the symbols for those routines defined in cbm_kernal.inc. (This
changes no functionality.)
To do this, we need to import cbm_kernal.inc in a namespace so we
don't have a collision between the PLOT that we're defining and the
Kernal definition.
We also add a UPDCRAMPTR symbol (used by kplot for VIC-20 and C64) to
the direct entry kernal routines in in cbm_kernal.inc, and expand the
comments describing what the "direct entry" Kernal routines are.
<greg.king5@verizon.net> (GitHub: greg-king5) came up with this idea
and did initial testing of it.
This has been tested on VICE xvic, x64 and xplus4 emulators with a
program that does a cputs() call (github.com/0cjs/vic20cc65) to
confirm that it works the same way after as it did before.
We want to add the capability to not only get the time but also set the time, but there's no "setter" for the "getter" time().
The first ones that come into mind are gettimeofday() and settimeofday(). However, they take a struct timezone argument that doesn't make sense - even the man pages says "The use of the timezone structure is obsolete; the tz argument should normally be specified as NULL." And POSIX says "Applications should use the clock_gettime() function instead of the obsolescent gettimeofday() function."
The ...timeofday() functions work with microseconds while the clock_...time() functions work with nanoseconds. Given that we expect our targets to support only 1/10 of seconds the microseconds look preferable at first sight. However, already microseconds require the cc65 data type 'long' so it's not such a relevant difference to nanoseconds. Additionally clock_getres() seems useful.
In order to avoid code duplication clock_gettime() takes over the role of the actual time getter from _systime(). So time() now calls clock_gettime() instead of _systime().
For some reason beyond my understanding _systime() was mentioned in time.h. _systime() worked exactly like e.g. _sysremove() and those _sys...() functions are all considered internal. The only reason I could see would be a performance gain of bypassing the time() wrapper. However, all known _systime() implementations internally called mktime(). And mktime() is implemented in C using an iterative algorithm so I really can't see what would be left to gain here. From that perspective I decided to just remove _systime().
All but one joystick drivers didn't use IRQs. Espsecially when the joystick driver kernel was the only .interruptor this meant quite some unnecessary overhead because it pulled in the whole IRQ infrastructure.
I was told that the one driver using IRQs (the DXS/HIT-4 Player joystick driver for the C64) can be reworked to not do it. Until this is done that driver is defunct.
As discussed in https://github.com/cc65/cc65/pull/452 after my premature merge the two functions in question don't work as expected.
Additionally I adjusted several style deviations in the pull request in question.
So far the joy_masks array allowed several joystick drivers for a single target to each have different joy_read return values. However this meant that every call to joy_read implied an additional joy_masks lookup to post-process the return value.
Given that almost all targets only come with a single joystick driver this seems an inappropriate overhead. Therefore now the target header files contain constants matching the return value of the joy_read of the joystick driver(s) on that target.
If there indeed are several joystick drivers for a single target they must agree on a common return value for joy_read. In some cases this was alredy the case as there's a "natural" return value for joy_read. However a few joystick drivers need to be adjusted. This may cause some overhead inside the driver. But that is for sure smaller than the overhead introduced by the joy_masks lookup before.
!!! ToDo !!!
The following three joystick drivers become broken with this commit and need to be adjusted:
- atrmj8.s
- c64-numpad.s
- vic20-stdjoy.s
About all CONIO functions offering a <...>xy variant call
popa
_gotoxy
By providing an internal gotoxy variant that starts with a popa all those CONIO function can be shortened by 3 bytes. As soon as program calls more than one CONIO function this means an overall code size reduction.
The name RAM doesn't make much sense in general for a memeory area because i.e. the zero page is for sure RAM but is not part of the memory area named RAM.
For disk based targets it makes sense to put the disk file more into focus and here MAIN means the main part of the file - in contrast to some header.
Only for ROM based targets the name RAM is kept as it makes sense to focus on the difference between RAM and ROM.
The way we want to use the INITBSS segment - and especially the fact that it won't have the type bss on all ROM based targets - means that the name INITBSS is misleading. After all INIT is the best name from my perspective as it serves several purposes and therefore needs a rather generic name.
Unfortunately this means that the current INIT segment needs to be renamed too. Looking for a short (ideally 4 letter) name I came up with ONCE as it contains all code (and data) accessed only once during initialization.
So far the INIT segment was run from the later heap+stack. Now the INIT segment is run from the later BSS. The background is that so far the INIT segment was pretty small (from $80 to $180 bytes). But upcoming changes will increase the INIT segment in certain scenarios up to ~ $1000 bytes. So programs with very limited heap+stack might just not been able to move the INIT segment to its run location. But moving the INIT segment to the later BSS allows it to occupy the later BSS+heap+stack.
In order to allow that the constructors are _NOT_ allowed anymore to access the BSS. Rather they must use the DATA segment or the new INITBSS segment. The latter isn't cleared at any point so the constructors may use it to expose values to the main program. However they must make sure to always write the values as they are not pre-initialized.
Up to now static drivers were created via co65 from dynamic drivers. However there was an issue with that approach:
The dynamic drivers are "o65 simple files" which obligates that they start with the 'code' segment. However dynamic drivers need to start with the module header - which is written to. For dynamic drivers this isn't more than a conceptual issue because they are always contain a 'data' segment and may therefore only be loaded into writable memory.
However when dynamic drivers are converted to static drivers using co65 then that issue becomes a real problem as then the 'code' segment may end up in non-writable memory - and thus writing to the module header fails.
Instead of changing the way dynamic drivers work I opted to rather make static driver creation totally independent from dynamic drivers. This allows to place the module header in the 'data' segment (see 'module.mac').
This change was suppsed to fix the issue that the former JUMPTABLE is merked as 'ro' while it is actually written to in several scenarios. When drivers are converted using co65 and then compiled into ROMs the JUMPTABLE isn't copied to RAM and therefore the write operations in question fail.
However unfortunately I didn't succeed in changing that :-( Just setting the former JUMPTABLE to 'rw' broke the drivers. So I placed the DATA segment directly after the former JUMPTABLE segment. This made the drivers converted with co65 work again - obviously after changing libsrc/Makefile:235 from '--code-label' to '--data-label'. But the actual dynamic drivers still didn't work as the former JUMPTABLE wasn't placed as the beginning of the loaded file anymore. That effect could be changed by exchanging src/ld65/o65.c:1391 with src/ld65/o65.c:1394 but doing so broke the drivers again :-((
- No complex shell logic.
- "Source file shadowing" for all targets via vpath.
- Dependency handling.
- True incremental build.
- Don't write into source directories.
- Easy cleanup by just removing 'wrk'.
- No complex shell logic.
- "Source file shadowing" for all targets via vpath.
- Dependency handling.
- True incremental build.
- Don't write into source directories.
- Easy cleanup by just removing 'wrk'.
