/*****************************************************************************/ /* */ /* serial.h */ /* */ /* Serial communication API */ /* */ /* */ /* */ /* (C) 2003 Ullrich von Bassewitz */ /* Römerstrasse 52 */ /* D-70794 Filderstadt */ /* EMail: uz@cc65.org */ /* */ /* */ /* This software is provided 'as-is', without any expressed or implied */ /* warranty. In no event will the authors be held liable for any damages */ /* arising from the use of this software. */ /* */ /* Permission is granted to anyone to use this software for any purpose, */ /* including commercial applications, and to alter it and redistribute it */ /* freely, subject to the following restrictions: */ /* */ /* 1. The origin of this software must not be misrepresented; you must not */ /* claim that you wrote the original software. If you use this software */ /* in a product, an acknowledgment in the product documentation would be */ /* appreciated but is not required. */ /* 2. Altered source versions must be plainly marked as such, and must not */ /* be misrepresented as being the original software. */ /* 3. This notice may not be removed or altered from any source */ /* distribution. */ /* */ /*****************************************************************************/ #ifndef _SERIAL_H #define _SERIAL_H /*****************************************************************************/ /* Data */ /*****************************************************************************/ /* Baudrate settings */ #define SER_BAUD_45_5 0x00 #define SER_BAUD_50 0x01 #define SER_BAUD_75 0x02 #define SER_BAUD_110 0x03 #define SER_BAUD_134_5 0x04 #define SER_BAUD_150 0x05 #define SER_BAUD_300 0x06 #define SER_BAUD_600 0x07 #define SER_BAUD_1200 0x08 #define SER_BAUD_1800 0x09 #define SER_BAUD_2400 0x0A #define SER_BAUD_4800 0x0B #define SER_BAUD_9600 0x0C #define SER_BAUD_19200 0x0D #define SER_BAUD_38400 0x0E #define SER_BAUD_57600 0x0F #define SER_BAUD_115200 0x10 #define SER_BAUD_230400 0x11 /* Data bit settings */ #define SER_BITS_5 0x00 #define SER_BITS_6 0x01 #define SER_BITS_7 0x02 #define SER_BITS_8 0x03 /* Stop bit settings */ #define SER_STOP_1 0x00 /* One stop bit */ #define SER_STOP_2 0x01 /* Two stop bits */ /* Parity settings */ #define SER_PAR_NONE 0x00 #define SER_PAR_ODD 0x01 #define SER_PAR_EVEN 0x02 #define SER_PAR_MARK 0x03 #define SER_PAR_SPACE 0x04 /* Handshake settings. The latter two may be combined. */ #define SER_HS_NONE 0x00 /* No handshake */ #define SER_HS_HW 0x01 /* Hardware (RTS/CTS) handshake */ #define SER_HS_SW 0x02 /* Software handshake */ /* Bit masks to mask out things from the status returned by rs232_status */ #define SER_STATUS_PE 0x01 /* Parity error */ #define SER_STATUS_FE 0x02 /* Framing error */ #define SER_STATUS_OE 0x04 /* Overrun error */ #define SER_STATUS_DCD 0x20 /* NOT data carrier detect */ #define SER_STATUS_DSR 0x40 /* NOT data set ready */ /* Error codes returned by all functions */ #define SER_ERR_OK 0x00 /* Not an error - relax */ #define SER_ERR_NO_DRIVER 0x01 /* No driver available */ #define SER_ERR_CANNOT_LOAD 0x02 /* Error loading driver */ #define SER_ERR_INV_DRIVER 0x03 /* Invalid driver */ #define SER_ERR_NO_DEVICE 0x04 /* Device (hardware) not found */ #define SER_ERR_BAUD_UNAVAIL 0x05 /* Baud rate not available */ #define SER_ERR_NO_DATA 0x06 /* Nothing to read */ #define SER_ERR_OVERFLOW 0x07 /* No room in send buffer */ #define SER_ERR_INIT_FAILED 0x08 /* Initialization failed */ /* Struct containing parameters for the serial port */ struct ser_params { unsigned char baudrate; /* Baudrate */ unsigned char databits; /* Number of data bits */ unsigned char stopbits; /* Number of stop bits */ unsigned char parity; /* Parity setting */ unsigned char handshake; /* Type of handshake to use */ }; /*****************************************************************************/ /* Code */ /*****************************************************************************/ unsigned char __fastcall__ ser_load_driver (const char* driver); /* Load and install a serial driver. Return an error code. */ unsigned char __fastcall__ ser_unload (void); /* Uninstall, then unload the currently loaded driver. */ unsigned char __fastcall__ ser_install (void* driver); /* Install an already loaded driver. Return an error code. */ unsigned char __fastcall__ ser_uninstall (void); /* Uninstall the currently loaded driver and return an error code. * Note: This call does not free allocated memory. */ unsigned char __fastcall__ ser_params (const struct ser_params* params); /* Set the port parameters. This will also enable the port. */ unsigned char __fastcall__ ser_get (char* b); /* Get a character from the serial port. If no characters are available, the * function will return SER_ERR_NO_DATA, so this is not a fatal error. */ unsigned char __fastcall__ ser_put (char b); /* Send a character via the serial port. There is a transmit buffer, but * transmitting is not done via interrupt. The function returns * SER_ERR_OVERFLOW if there is no space left in the transmit buffer. */ unsigned char __fastcall__ ser_pause (void); /* Assert flow control and disable interrupts. */ unsigned char __fastcall__ ser_unpause (void); /* Re-enable interrupts and release flow control */ unsigned char __fastcall__ ser_status (unsigned char* status); /* Return the serial port status. */ /* End of serial.h */ #endif