mirror of
https://github.com/cc65/cc65.git
synced 2024-08-30 01:29:41 +00:00
300 lines
9.2 KiB
Plaintext
300 lines
9.2 KiB
Plaintext
<!doctype linuxdoc system>
|
|
|
|
<article>
|
|
|
|
<title>Commodore 510 (aka P500) specific information for cc65
|
|
<author>Ullrich von Bassewitz, <htmlurl url="mailto:uz@cc65.org" name="uz@cc65.org">
|
|
Stefan A. Haubenthal, <htmlurl url="mailto:polluks@sdf.lonestar.org" name="polluks@sdf.lonestar.org">
|
|
<date>2006-05-22
|
|
|
|
<abstract>
|
|
An overview over the Commodore 510 runtime system as it is implemented for the
|
|
cc65 C compiler.
|
|
</abstract>
|
|
|
|
<!-- Table of contents -->
|
|
<toc>
|
|
|
|
<!-- Begin the document -->
|
|
|
|
<sect>Overview<p>
|
|
|
|
This file contains an overview of the CBM 510 runtime system as it comes with
|
|
the cc65 C compiler. It describes the memory layout, CBM 510 specific header
|
|
files, available drivers, and any pitfalls specific to that platform.
|
|
|
|
Please note that CBM 510 specific functions are just mentioned here, they are
|
|
described in detail in the separate <htmlurl url="funcref.html" name="function
|
|
reference">. Even functions marked as "platform dependent" may be available on
|
|
more than one platform. Please see the function reference for more
|
|
information.
|
|
|
|
In addition to the Commodore 510 (named P128 in the U.S.), no other
|
|
machines are supported by this cc65 target.
|
|
|
|
|
|
|
|
<sect>Binary format<p>
|
|
|
|
The standard binary output format generated by the linker for the Commodore
|
|
510 target is a machine language program with a one line BASIC stub, which
|
|
transfers control to the machine language running in bank 0. This means that a
|
|
program can be loaded as BASIC program and started with RUN. It is of course
|
|
possible to change this behaviour by using a modified startup file and linker
|
|
config.
|
|
|
|
|
|
|
|
<sect>Memory layout<p>
|
|
|
|
cc65 generated programs for the Commodore 510 run in bank 0, the memory bank
|
|
reserved for BASIC programs. Since there are no ROMs in this memory bank,
|
|
kernal subroutines are either emulated or called by bank switching, which has
|
|
the disadvantage of being slow compared to a direct call.
|
|
|
|
The default memory configuration for the CBM 510 allocates all memory between
|
|
$0002 and $FFF0 in bank 0 for the compiled program. Some space
|
|
in low memory is lost, because a separate hardware stack is set up in page 1,
|
|
and the kernal replacement functions need some more memory locations. A few
|
|
more pages are lost in high memory, because the runtime sets up a copy of the
|
|
character ROM, a text screen and a CBM compatible jump table at $FF81.
|
|
The main startup code is located at $0400, so about 54K of the complete
|
|
bank are actually usable for applications.
|
|
|
|
Special locations:
|
|
|
|
<descrip>
|
|
<tag/Stack/
|
|
The C runtime stack is located at $FF81 and growing downwards.
|
|
|
|
<tag/Heap/
|
|
The C heap is located at the end of the program and grows towards the C
|
|
runtime stack.
|
|
</descrip><p>
|
|
|
|
|
|
|
|
<sect>Platform specific header files<p>
|
|
|
|
Programs containing CBM 510 specific code may use the <tt/cbm510.h/ or
|
|
<tt/cbm.h/ header files. Using the later may be an option when writing code
|
|
for more than one CBM platform, since it includes <tt/cbm510.h/ and declares
|
|
several functions common to all CBM platforms.
|
|
|
|
<sect1>CBM 510 specific functions<p>
|
|
|
|
The functions listed below are special for the CBM 510. See the <htmlurl
|
|
url="funcref.html" name="function reference"> for declaration and usage.
|
|
|
|
<itemize>
|
|
<item>peekbsys
|
|
<item>peekwsys
|
|
<item>pokebsys
|
|
<item>pokewsys
|
|
</itemize>
|
|
|
|
|
|
<sect1>CBM specific functions<p>
|
|
|
|
Some functions are available for all (or at least most) of the Commodore
|
|
machines. See the <htmlurl url="funcref.html" name="function reference"> for
|
|
declaration and usage.
|
|
|
|
|
|
<itemize>
|
|
<item>cbm_close
|
|
<item>cbm_closedir
|
|
<item>cbm_k_setlfs
|
|
<item>cbm_k_setnam
|
|
<item>cbm_k_load
|
|
<item>cbm_k_save
|
|
<item>cbm_k_open
|
|
<item>cbm_k_close
|
|
<item>cbm_k_readst
|
|
<item>cbm_k_chkin
|
|
<item>cbm_k_ckout
|
|
<item>cbm_k_basin
|
|
<item>cbm_k_bsout
|
|
<item>cbm_k_clrch
|
|
<item>cbm_load
|
|
<item>cbm_open
|
|
<item>cbm_opendir
|
|
<item>cbm_read
|
|
<item>cbm_readdir
|
|
<item>cbm_save
|
|
<item>cbm_write
|
|
<item>get_tv
|
|
</itemize>
|
|
|
|
|
|
|
|
<sect1>Hardware access<p>
|
|
|
|
The following pseudo variables declared in the <tt/cbm510.h/ header file do
|
|
allow access to hardware located in the address space. Some variables are
|
|
structures, accessing the struct fields will access the chip registers.
|
|
|
|
<bf>Note:</bf> All I/O chips are located in the system bank (bank 15) and can
|
|
therefore not be accessed like on other platforms. Please use one of the
|
|
<tt/peekbsys/, <tt/peekwsys/, <tt/pokebsys/ and <tt/pokewsys/ functions to
|
|
access the I/O chips. Direct reads and writes to the structures named below
|
|
will <em>not</em> work!
|
|
|
|
<descrip>
|
|
|
|
<tag><tt/VIC/</tag>
|
|
The <tt/VIC/ structure allows access to the VIC II (the graphics
|
|
controller). See the <tt/_vic2.h/ header file located in the include
|
|
directory for the declaration of the structure.
|
|
|
|
<tag><tt/SID/</tag>
|
|
The <tt/SID/ structure allows access to the SID (the sound interface
|
|
device). See the <tt/_sid.h/ header file located in the include directory
|
|
for the declaration of the structure.
|
|
|
|
<tag><tt/ACIA/</tag>
|
|
Access to the ACIA (the RS232 chip) is available via the <tt/ACIA/ variable.
|
|
See the <tt/_6551.h/ header file located in the include directory for the
|
|
declaration of the structure.
|
|
|
|
<tag><tt/CIA/</tag>
|
|
Access to the CIA chip is available via the <tt/CIA/ variable. See the
|
|
<tt/_6526.h/ header file located in the include directory for the
|
|
declaration of the structure.
|
|
|
|
<tag><tt/TPI1, TPI2/</tag>
|
|
The two 6525 triport chips may be accessed by using this variable. See the
|
|
<tt/_6525.h/ header file located in the include directory for the
|
|
declaration of the structure.
|
|
|
|
</descrip><p>
|
|
|
|
|
|
|
|
<sect>Loadable drivers<p>
|
|
|
|
|
|
<sect1>Graphics drivers<p>
|
|
|
|
No graphics drivers are currently available for the Commodore 510.
|
|
|
|
|
|
<sect1>Extended memory drivers<p>
|
|
|
|
<descrip>
|
|
<tag><tt/cbm510-ram.emd/</tag>
|
|
A driver for the RAM in bank 1. Supports up to 255 pages with 256 bytes
|
|
each.
|
|
</descrip><p>
|
|
|
|
|
|
<sect1>Joystick drivers<p>
|
|
|
|
<descrip>
|
|
|
|
<tag><tt/cbm510-std.joy/</tag>
|
|
Supports up to two standard joysticks connected to the joysticks port of
|
|
the Commodore 510.
|
|
|
|
</descrip><p>
|
|
|
|
|
|
<sect1>Mouse drivers<p>
|
|
|
|
No mouse drivers are currently available for the Commodore 510.
|
|
|
|
|
|
<sect1>RS232 device drivers<p>
|
|
|
|
<descrip>
|
|
|
|
<tag><tt/cbm510-std.ser/</tag>
|
|
Driver for the 6551 ACIA chip built into the Commodore 510. Supports up to
|
|
19200 baud, hardware flow control (RTS/CTS) and interrupt driven receives.
|
|
Note that because of the peculiarities of the 6551 chip transmits are not
|
|
interrupt driven, and the transceiver blocks if the receiver asserts flow
|
|
control because of a full buffer.
|
|
|
|
</descrip><p>
|
|
|
|
|
|
<sect>Limitations<label id="limitations"><p>
|
|
|
|
|
|
<sect1>Kernal and hardware access<p>
|
|
|
|
Since the program runs in bank 0, and the kernal and all I/O chips are located
|
|
in bank 15, calling ROM routines or accessing hardware needs special code. The
|
|
cc65 runtime implements wrappers for all functions in the kernal jump table.
|
|
While this simplifies things, it should be noted that the wrappers do have
|
|
quite an impact on performance: A cross bank call has an extra 300µs
|
|
penalty added by the wrapper.
|
|
|
|
<sect1>Interrupts<p>
|
|
|
|
Compiled programs contain an interrupt handler that runs in the program bank.
|
|
This has several advantages, one of them being performance (see cross bank
|
|
call overhead mentioned above). However, this introduces one problem:
|
|
Interrupts are lost while the CPU executes code in the kernal bank. As a
|
|
result, the clock may go wrong and (worse) serial interrupts may get lost.
|
|
|
|
Since the cc65 runtime does only call the kernal for disk I/O, this means that
|
|
a program should not do file I/O while it depends on interrupts.
|
|
|
|
|
|
<sect>Other hints<p>
|
|
|
|
<sect1>Passing arguments to the program<p>
|
|
|
|
Command line argument passing is currently not supported for the Commodore
|
|
510.
|
|
|
|
|
|
<sect1>Program return code<p>
|
|
|
|
The program return code (signed char) is passed back to BASIC by use of the
|
|
<tt/ST/ variable.
|
|
|
|
|
|
<sect1>Interrupt handlers<p>
|
|
|
|
The runtime for the Commodore 510 uses routines marked as <tt/.CONDES/ type 2
|
|
for interrupt handlers. Such routines must be written as simple machine
|
|
language subroutines and will be called automatically by the interrupt handler
|
|
code when they are linked into a program. See the discussion of the
|
|
<tt/.CONDES/ feature in the <htmlurl url="ca65.html" name="assembler manual">.
|
|
|
|
|
|
|
|
<sect>Bugs/Feedback<p>
|
|
|
|
If you have problems using the library, if you find any bugs, or if you're
|
|
doing something interesting with it, I would be glad to hear from you. Feel
|
|
free to contact me by email (<htmlurl url="mailto:uz@cc65.org"
|
|
name="uz@cc65.org">).
|
|
|
|
|
|
|
|
<sect>License<p>
|
|
|
|
This software is provided 'as-is', without any expressed or implied
|
|
warranty. In no event will the authors be held liable for any damages
|
|
arising from the use of this software.
|
|
|
|
Permission is granted to anyone to use this software for any purpose,
|
|
including commercial applications, and to alter it and redistribute it
|
|
freely, subject to the following restrictions:
|
|
|
|
<enum>
|
|
<item> The origin of this software must not be misrepresented; you must not
|
|
claim that you wrote the original software. If you use this software
|
|
in a product, an acknowledgment in the product documentation would be
|
|
appreciated but is not required.
|
|
<item> Altered source versions must be plainly marked as such, and must not
|
|
be misrepresented as being the original software.
|
|
<item> This notice may not be removed or altered from any source
|
|
distribution.
|
|
</enum>
|
|
|
|
</article>
|