mirror of
https://github.com/cc65/cc65.git
synced 2024-11-18 00:07:21 +00:00
2c975d3642
Up to now static drivers were created via co65 from dynamic drivers. However there was an issue with that approach: The dynamic drivers are "o65 simple files" which obligates that they start with the 'code' segment. However dynamic drivers need to start with the module header - which is written to. For dynamic drivers this isn't more than a conceptual issue because they are always contain a 'data' segment and may therefore only be loaded into writable memory. However when dynamic drivers are converted to static drivers using co65 then that issue becomes a real problem as then the 'code' segment may end up in non-writable memory - and thus writing to the module header fails. Instead of changing the way dynamic drivers work I opted to rather make static driver creation totally independent from dynamic drivers. This allows to place the module header in the 'data' segment (see 'module.mac').
467 lines
14 KiB
ArmAsm
467 lines
14 KiB
ArmAsm
;
|
|
; Driver for the 1351 proportional mouse. Parts of the code are from
|
|
; the Commodore 1351 mouse users guide.
|
|
;
|
|
; 2009-09-26, Ullrich von Bassewitz
|
|
; 2010-02-06, Greg King
|
|
;
|
|
; The driver prevents the keyboard from interfering by changing the
|
|
; keyboard's output port into an input port while the driver reads its
|
|
; controller device. That disables a wire that is left active by the
|
|
; Kernal. That wire is used by the STOP-key to break out of BASIC
|
|
; programs -- CC65 programs don't use that feature. The wire is shared
|
|
; by these keys: STOP, "Q", Commodore, Space, "2", CTRL, Left-Arrow, and
|
|
; "1". I listed them, in order, from bit 7 over to bit 0. The
|
|
; rightmost five keys can look like joystick switches.
|
|
;
|
|
; The driver prevents the mouse/joystick from interfering by "blinding"
|
|
; the keyboard scanner while any button/switch is active. It changes
|
|
; the input port into an output port, then stores all zero-bits in that
|
|
; port's latch. Reading from an output port sees the bitwise-AND of the
|
|
; latch and the input signals. Therefore, the scanner thinks that eight
|
|
; keys are being pushed at the same time. It doesn't know what to do
|
|
; about that condition; so, it does nothing. The driver lets the
|
|
; scanner see normally, again, when no buttons/switches are active.
|
|
;
|
|
|
|
.include "zeropage.inc"
|
|
.include "mouse-kernel.inc"
|
|
.include "c64.inc"
|
|
|
|
.macpack generic
|
|
.macpack module
|
|
|
|
|
|
; ------------------------------------------------------------------------
|
|
; Header. Includes jump table
|
|
|
|
module_header _c64_1351_mou
|
|
|
|
HEADER:
|
|
|
|
; Driver signature
|
|
|
|
.byte $6d, $6f, $75 ; "mou"
|
|
.byte MOUSE_API_VERSION ; Mouse driver API version number
|
|
|
|
; Library reference
|
|
|
|
.addr $0000
|
|
|
|
; Jump table
|
|
|
|
.addr INSTALL
|
|
.addr UNINSTALL
|
|
.addr HIDE
|
|
.addr SHOW
|
|
.addr SETBOX
|
|
.addr GETBOX
|
|
.addr MOVE
|
|
.addr BUTTONS
|
|
.addr POS
|
|
.addr INFO
|
|
.addr IOCTL
|
|
.addr IRQ
|
|
|
|
; Mouse driver flags
|
|
|
|
.byte MOUSE_FLAG_LATE_IRQ
|
|
|
|
; Callback table, set by the kernel before INSTALL is called
|
|
|
|
CHIDE: jmp $0000 ; Hide the cursor
|
|
CSHOW: jmp $0000 ; Show the cursor
|
|
CPREP: jmp $0000 ; Prepare to move the cursor
|
|
CDRAW: jmp $0000 ; Draw the cursor
|
|
CMOVEX: jmp $0000 ; Move the cursor to X coord
|
|
CMOVEY: jmp $0000 ; Move the cursor to Y coord
|
|
|
|
|
|
;----------------------------------------------------------------------------
|
|
; Constants
|
|
|
|
SCREEN_HEIGHT = YSIZE * 8 - 1 ; (origin is zero)
|
|
SCREEN_WIDTH = XSIZE * 8 - 1
|
|
|
|
;----------------------------------------------------------------------------
|
|
; Global variables. The bounding box values are sorted so that they can be
|
|
; written with the least effort in the SETBOX and GETBOX routines, so don't
|
|
; reorder them.
|
|
|
|
.bss
|
|
|
|
Vars:
|
|
OldPotX: .res 1 ; Old hw counter values
|
|
OldPotY: .res 1
|
|
|
|
XPos: .res 2 ; Current mouse position, X
|
|
YPos: .res 2 ; Current mouse position, Y
|
|
XMin: .res 2 ; X1 value of bounding box
|
|
YMin: .res 2 ; Y1 value of bounding box
|
|
XMax: .res 2 ; X2 value of bounding box
|
|
YMax: .res 2 ; Y2 value of bounding box
|
|
Buttons: .res 1 ; button status bits
|
|
|
|
OldValue: .res 1 ; Temp for MoveCheck routine
|
|
NewValue: .res 1 ; Temp for MoveCheck routine
|
|
|
|
.rodata
|
|
|
|
; Default values for above variables
|
|
; (We use ".proc" because we want to define both a label and a scope.)
|
|
|
|
.proc DefVars
|
|
.byte 0, 0 ; OldPotX/OldPotY
|
|
.word SCREEN_WIDTH/2 ; XPos
|
|
.word SCREEN_HEIGHT/2 ; YPos
|
|
.word 0 ; XMin
|
|
.word 0 ; YMin
|
|
.word SCREEN_WIDTH ; XMax
|
|
.word SCREEN_HEIGHT ; YMax
|
|
.byte %00000000 ; Buttons
|
|
.endproc
|
|
|
|
.code
|
|
|
|
;----------------------------------------------------------------------------
|
|
; INSTALL routine. Is called after the driver is loaded into memory. If
|
|
; possible, check if the hardware is present.
|
|
; Must return an MOUSE_ERR_xx code in a/x.
|
|
|
|
INSTALL:
|
|
|
|
; Initialize variables. Just copy the default stuff over
|
|
|
|
ldx #.sizeof(DefVars)-1
|
|
@L1: lda DefVars,x
|
|
sta Vars,x
|
|
dex
|
|
bpl @L1
|
|
|
|
; Be sure the mouse cursor is invisible and at the default location. We
|
|
; need to do that here, because our mouse interrupt handler doesn't set the
|
|
; mouse position if it hasn't changed.
|
|
|
|
sei
|
|
jsr CHIDE
|
|
lda XPos
|
|
ldx XPos+1
|
|
jsr CMOVEX
|
|
lda YPos
|
|
ldx YPos+1
|
|
jsr CMOVEY
|
|
cli
|
|
|
|
; Done, return zero (= MOUSE_ERR_OK)
|
|
|
|
ldx #$00
|
|
txa
|
|
rts
|
|
|
|
;----------------------------------------------------------------------------
|
|
; UNINSTALL routine. Is called before the driver is removed from memory.
|
|
; No return code required (the driver is removed from memory on return).
|
|
|
|
UNINSTALL = HIDE ; Hide cursor on exit
|
|
|
|
;----------------------------------------------------------------------------
|
|
; HIDE routine. Is called to hide the mouse pointer. The mouse kernel manages
|
|
; a counter for calls to show/hide, and the driver entry point is only called
|
|
; if the mouse is currently visible and should get hidden. For most drivers,
|
|
; no special action is required besides hiding the mouse cursor.
|
|
; No return code required.
|
|
|
|
HIDE: sei
|
|
jsr CHIDE
|
|
cli
|
|
rts
|
|
|
|
;----------------------------------------------------------------------------
|
|
; SHOW routine. Is called to show the mouse pointer. The mouse kernel manages
|
|
; a counter for calls to show/hide, and the driver entry point is only called
|
|
; if the mouse is currently hidden and should become visible. For most drivers,
|
|
; no special action is required besides enabling the mouse cursor.
|
|
; No return code required.
|
|
|
|
SHOW: sei
|
|
jsr CSHOW
|
|
cli
|
|
rts
|
|
|
|
;----------------------------------------------------------------------------
|
|
; SETBOX: Set the mouse bounding box. The parameters are passed as they come
|
|
; from the C program, that is, a pointer to a mouse_box struct in a/x.
|
|
; No checks are done if the mouse is currently inside the box, this is the job
|
|
; of the caller. It is not necessary to validate the parameters, trust the
|
|
; caller and save some code here. No return code required.
|
|
|
|
SETBOX: sta ptr1
|
|
stx ptr1+1 ; Save data pointer
|
|
|
|
ldy #.sizeof (MOUSE_BOX)-1
|
|
sei
|
|
|
|
@L1: lda (ptr1),y
|
|
sta XMin,y
|
|
dey
|
|
bpl @L1
|
|
|
|
cli
|
|
rts
|
|
|
|
;----------------------------------------------------------------------------
|
|
; GETBOX: Return the mouse bounding box. The parameters are passed as they
|
|
; come from the C program, that is, a pointer to a mouse_box struct in a/x.
|
|
|
|
GETBOX: sta ptr1
|
|
stx ptr1+1 ; Save data pointer
|
|
|
|
ldy #.sizeof (MOUSE_BOX)-1
|
|
@L1: lda XMin,y
|
|
sta (ptr1),y
|
|
dey
|
|
bpl @L1
|
|
rts
|
|
|
|
;----------------------------------------------------------------------------
|
|
; MOVE: Move the mouse to a new position. The position is passed as it comes
|
|
; from the C program, that is: X on the stack and Y in a/x. The C wrapper will
|
|
; remove the parameter from the stack on return.
|
|
; No checks are done if the new position is valid (within the bounding box or
|
|
; the screen). No return code required.
|
|
;
|
|
|
|
MOVE: sei ; No interrupts
|
|
|
|
sta YPos
|
|
stx YPos+1 ; New Y position
|
|
jsr CMOVEY ; Set it
|
|
|
|
ldy #$01
|
|
lda (sp),y
|
|
sta XPos+1
|
|
tax
|
|
dey
|
|
lda (sp),y
|
|
sta XPos ; New X position
|
|
|
|
jsr CMOVEX ; Move the cursor
|
|
|
|
cli ; Allow interrupts
|
|
rts
|
|
|
|
;----------------------------------------------------------------------------
|
|
; BUTTONS: Return the button mask in a/x.
|
|
|
|
BUTTONS:
|
|
lda Buttons
|
|
ldx #0
|
|
and #$1F
|
|
rts
|
|
|
|
;----------------------------------------------------------------------------
|
|
; POS: Return the mouse position in the MOUSE_POS struct pointed to by ptr1.
|
|
; No return code required.
|
|
|
|
POS: ldy #MOUSE_POS::XCOORD ; Structure offset
|
|
|
|
sei ; Disable interrupts
|
|
lda XPos ; Transfer the position
|
|
sta (ptr1),y
|
|
lda XPos+1
|
|
iny
|
|
sta (ptr1),y
|
|
lda YPos
|
|
iny
|
|
sta (ptr1),y
|
|
lda YPos+1
|
|
cli ; Enable interrupts
|
|
|
|
iny
|
|
sta (ptr1),y ; Store last byte
|
|
|
|
rts ; Done
|
|
|
|
;----------------------------------------------------------------------------
|
|
; INFO: Returns mouse position and current button mask in the MOUSE_INFO
|
|
; struct pointed to by ptr1. No return code required.
|
|
;
|
|
; We're cheating here to keep the code smaller: The first fields of the
|
|
; mouse_info struct are identical to the mouse_pos struct, so we will just
|
|
; call _mouse_pos to initialize the struct pointer and fill the position
|
|
; fields.
|
|
|
|
INFO: jsr POS
|
|
|
|
; Fill in the button state
|
|
|
|
jsr BUTTONS ; Will not touch ptr1
|
|
ldy #MOUSE_INFO::BUTTONS
|
|
sta (ptr1),y
|
|
|
|
rts
|
|
|
|
;----------------------------------------------------------------------------
|
|
; IOCTL: Driver defined entry point. The wrapper will pass a pointer to ioctl
|
|
; specific data in ptr1, and the ioctl code in A.
|
|
; Must return an error code in a/x.
|
|
;
|
|
|
|
IOCTL: lda #<MOUSE_ERR_INV_IOCTL ; We don't support ioclts for now
|
|
ldx #>MOUSE_ERR_INV_IOCTL
|
|
rts
|
|
|
|
;----------------------------------------------------------------------------
|
|
; IRQ: Irq handler entry point. Called as a subroutine but in IRQ context
|
|
; (so be careful). The routine MUST return carry set if the interrupt has been
|
|
; 'handled' - which means that the interrupt source is gone. Otherwise it
|
|
; MUST return carry clear.
|
|
;
|
|
|
|
IRQ: jsr CPREP
|
|
|
|
; Record the state of the buttons.
|
|
; Avoid crosstalk between the keyboard and the mouse.
|
|
|
|
ldy #%00000000 ; Set ports A and B to input
|
|
sty CIA1_DDRB
|
|
sty CIA1_DDRA ; Keyboard won't look like mouse
|
|
lda CIA1_PRB ; Read Control-Port 1
|
|
dec CIA1_DDRA ; Set port A back to output
|
|
eor #%11111111 ; Bit goes up when button goes down
|
|
sta Buttons
|
|
beq @L0 ;(bze)
|
|
dec CIA1_DDRB ; Mouse won't look like keyboard
|
|
sty CIA1_PRB ; Set "all keys pushed"
|
|
|
|
@L0: lda SID_ADConv1 ; Get mouse X movement
|
|
ldy OldPotX
|
|
jsr MoveCheck ; Calculate movement vector
|
|
|
|
; Skip processing if nothing has changed
|
|
|
|
bcc @SkipX
|
|
sty OldPotX
|
|
|
|
; Calculate the new X coordinate (--> a/y)
|
|
|
|
add XPos
|
|
tay ; Remember low byte
|
|
txa
|
|
adc XPos+1
|
|
tax
|
|
|
|
; Limit the X coordinate to the bounding box
|
|
|
|
cpy XMin
|
|
sbc XMin+1
|
|
bpl @L1
|
|
ldy XMin
|
|
ldx XMin+1
|
|
jmp @L2
|
|
@L1: txa
|
|
|
|
cpy XMax
|
|
sbc XMax+1
|
|
bmi @L2
|
|
ldy XMax
|
|
ldx XMax+1
|
|
@L2: sty XPos
|
|
stx XPos+1
|
|
|
|
; Move the mouse pointer to the new X pos
|
|
|
|
tya
|
|
jsr CMOVEX
|
|
|
|
; Calculate the Y movement vector
|
|
|
|
@SkipX: lda SID_ADConv2 ; Get mouse Y movement
|
|
ldy OldPotY
|
|
jsr MoveCheck ; Calculate movement
|
|
|
|
; Skip processing if nothing has changed
|
|
|
|
bcc @SkipY
|
|
sty OldPotY
|
|
|
|
; Calculate the new Y coordinate (--> a/y)
|
|
|
|
sta OldValue
|
|
lda YPos
|
|
sub OldValue
|
|
tay
|
|
stx OldValue
|
|
lda YPos+1
|
|
sbc OldValue
|
|
tax
|
|
|
|
; Limit the Y coordinate to the bounding box
|
|
|
|
cpy YMin
|
|
sbc YMin+1
|
|
bpl @L3
|
|
ldy YMin
|
|
ldx YMin+1
|
|
jmp @L4
|
|
@L3: txa
|
|
|
|
cpy YMax
|
|
sbc YMax+1
|
|
bmi @L4
|
|
ldy YMax
|
|
ldx YMax+1
|
|
@L4: sty YPos
|
|
stx YPos+1
|
|
|
|
; Move the mouse pointer to the new Y pos
|
|
|
|
tya
|
|
jsr CMOVEY
|
|
|
|
; Done
|
|
|
|
@SkipY: jsr CDRAW
|
|
clc ; Interrupt not "handled"
|
|
rts
|
|
|
|
; --------------------------------------------------------------------------
|
|
;
|
|
; Move check routine, called for both coordinates.
|
|
;
|
|
; Entry: y = old value of pot register
|
|
; a = current value of pot register
|
|
; Exit: y = value to use for old value
|
|
; x/a = delta value for position
|
|
;
|
|
|
|
MoveCheck:
|
|
sty OldValue
|
|
sta NewValue
|
|
ldx #$00
|
|
|
|
sub OldValue ; a = mod64 (new - old)
|
|
and #%01111111
|
|
cmp #%01000000 ; if (a > 0)
|
|
bcs @L1 ;
|
|
lsr a ; a /= 2;
|
|
beq @L2 ; if (a != 0)
|
|
ldy NewValue ; y = NewValue
|
|
sec
|
|
rts ; return
|
|
|
|
@L1: ora #%11000000 ; else, "or" in high-order bits
|
|
cmp #$FF ; if (a != -1)
|
|
beq @L2
|
|
sec
|
|
ror a ; a /= 2
|
|
dex ; high byte = -1 (X = $FF)
|
|
ldy NewValue
|
|
sec
|
|
rts
|
|
|
|
@L2: txa ; A = $00
|
|
clc
|
|
rts
|
|
|