cc65/libsrc at ad1c31b049fcea6fdefdd61786cac9b0f5345a20 - cc65

Back to revision 3818: The value of COLOR_WHITE changed back from 3 to 1.

2011-05-05 20:43:10 +00:00

Removed tgi_load() and all corresponding infrastructure. The idea behind tgi_load() was to be able to describe a TGI mode in a target-neutral way by resolution and colordepth. However it turned out that there arn't any cc65 targets sharing any resolution. As a result the only working target-independent approach for a TGI program is to call tgi_loaddriver(tgi_stddrv); and then look up the resolution provided - and to adapt to that resolution.

2011-05-02 10:38:48 +00:00

atari

interruptor support by Stefan Haubenthal

2011-06-13 16:42:45 +00:00

atmos

Added (again) IRQ support for the Oric Atmos by Stefan Haubenthal. This time

2011-06-07 21:22:02 +00:00

c16

Changed the startup module and the linker config for the C16 to use the common

2010-11-17 12:46:55 +00:00

c64

Removed tgi_load() and all corresponding infrastructure. The idea behind tgi_load() was to be able to describe a TGI mode in a target-neutral way by resolution and colordepth. However it turned out that there arn't any cc65 targets sharing any resolution. As a result the only working target-independent approach for a TGI program is to call tgi_loaddriver(tgi_stddrv); and then look up the resolution provided - and to adapt to that resolution.

2011-05-02 10:38:48 +00:00

c128

Removed tgi_load() and all corresponding infrastructure. The idea behind tgi_load() was to be able to describe a TGI mode in a target-neutral way by resolution and colordepth. However it turned out that there arn't any cc65 targets sharing any resolution. As a result the only working target-independent approach for a TGI program is to call tgi_loaddriver(tgi_stddrv); and then look up the resolution provided - and to adapt to that resolution.

2011-05-02 10:38:48 +00:00

cbm

Changes by Greg King:

2011-04-16 12:28:06 +00:00

cbm510

Removed unused TGI mode tables.

2011-05-02 10:30:49 +00:00

cbm610

Fixed order of options in call to ld65, which became important after the

2010-11-09 21:33:14 +00:00

common

Fixed comments. No code change.

2011-04-25 18:49:24 +00:00

conio

Added --forget-inc-paths to the assembler command line to avoid problems if

2009-12-18 11:58:50 +00:00

dbg

Added --forget-inc-paths to the assembler command line to avoid problems if

2009-12-18 11:58:50 +00:00

em

Added --forget-inc-paths to the assembler command line to avoid problems if

2009-12-18 11:58:50 +00:00

geos

Computed pixel aspect ratio (PAR) by presuming a display aspect ratio (DAR) of 4/3 for a classic CRT and using the given driver resolutions as storage aspect ratio (SAR).

2011-05-02 11:23:30 +00:00

joystick

Added --forget-inc-paths to the assembler command line to avoid problems if

2009-12-18 11:58:50 +00:00

lynx

Removed tgi_load() and all corresponding infrastructure. The idea behind tgi_load() was to be able to describe a TGI mode in a target-neutral way by resolution and colordepth. However it turned out that there arn't any cc65 targets sharing any resolution. As a result the only working target-independent approach for a TGI program is to call tgi_loaddriver(tgi_stddrv); and then look up the resolution provided - and to adapt to that resolution.

2011-05-02 10:38:48 +00:00

mouse

OOPS! Forgot to add the mouse_getbox and mouse_setbox modules to subversion.

2009-09-26 15:19:14 +00:00

nes

Fixed order of rules, so not only the tgi driver gets built.

2011-06-22 08:19:59 +00:00

pet

Changed the startup module and the linker config for the Commodore PET to use

2010-11-17 13:27:43 +00:00

plus4

Removed unused TGI mode tables.

2011-05-02 10:30:49 +00:00

runtime

Fixed an error in the division routine: The high byte of the wrong 16 bit

2011-01-11 17:08:29 +00:00

serial

Added --forget-inc-paths to the assembler command line to avoid problems if

2009-12-18 11:58:50 +00:00

supervision

Exclude (small) stack from RAM memory area (like on most other targets) to make explicit that the linker may not use all RAM. If the cc65 parameter stack isn't used at all the __STACKSIZE__ symbol may be overridden on the linker command line with -D __STACKSIZE__=0.

2010-10-02 10:20:00 +00:00

tgi

Removed tgi_load() and all corresponding infrastructure. The idea behind tgi_load() was to be able to describe a TGI mode in a target-neutral way by resolution and colordepth. However it turned out that there arn't any cc65 targets sharing any resolution. As a result the only working target-independent approach for a TGI program is to call tgi_loaddriver(tgi_stddrv); and then look up the resolution provided - and to adapt to that resolution.

2011-05-03 21:28:20 +00:00

vic20

Changed the startup module and the linker config for the Commodore VIC to use

2010-11-17 13:35:43 +00:00

zlib

Added --forget-inc-paths to the assembler command line to avoid problems if

2009-12-18 11:58:50 +00:00

Makefile

NES character mode TGI driver. By Stefan Haubenthal.

2011-06-21 20:34:18 +00:00