ol.sc ba7b4d5e86 Back to revision 3818: The value of COLOR_WHITE changed back from 3 to 1. ... git-svn-id: svn://svn.cc65.org/cc65/trunk@5023 b7a2c559-68d2-44c3-8de9-860c34a00d81		2011-05-05 20:43:10 +00:00
..
extra	Adjustment to recent change in ca65 relative include path handling.	2010-06-04 20:58:40 +00:00
_scrsize.s
apple2-40-48-16.s	Removed tgi_load() and all corresponding infrastructure. The idea behind tgi_load() was to be able to describe a TGI mode in a target-neutral way by resolution and colordepth. However it turned out that there arn't any cc65 targets sharing any resolution. As a result the only working target-independent approach for a TGI program is to call tgi_loaddriver(tgi_stddrv); and then look up the resolution provided - and to adapt to that resolution.	2011-05-02 10:38:48 +00:00
apple2-280-192-8.fnt	- Replaced font .byte's with font .incbin file	2009-11-03 22:20:48 +00:00
apple2-280-192-8.s	The TGI kernel will call SETVIEWPAGE(0) after calling INIT so there's no need to switch to the first page here.	2011-05-03 21:40:51 +00:00
apple2-auxmem.s	Removed generic macpack	2009-11-02 21:54:51 +00:00
apple2-ssc.s	Added macro for ssc slot selection.	2009-12-13 11:23:20 +00:00
apple2-stdjoy.s	Removed generic macpack	2009-11-02 21:54:51 +00:00
apple2-stdmou.s	Replaced left-over tab with space.	2009-12-09 18:16:02 +00:00
break.s
cclear.s
cgetc.s	Minor comment style adjustment.	2010-06-07 19:20:10 +00:00
chline.s
close.s	Clear __oserror on success.	2010-06-15 21:44:18 +00:00
closedir.c
clrscr.s
color.s	Back to revision 3818: The value of COLOR_WHITE changed back from 3 to 1.	2011-05-05 20:43:10 +00:00
cout.s
cputc.s	The constructor doesn't have any interaction with other constructors so there seems to be no need for a priority at all.	2011-01-29 21:36:18 +00:00
crt0.s	Minor beautification.	2011-01-26 21:37:42 +00:00
ctype.s
cvline.s
dioclose.s
diocommon.s
dioopen.s	Use MLI error names from ProDOS 8 Technical Reference Manual Quick Reference Card (and not Section 4.8 !).	2010-07-17 19:11:51 +00:00
dioread.s
diosectcount.s	Read number of total blocks from ProDOS 8 volume directory header - and fall back on the constant 280 only for non-ProDOS 8 disks.	2010-07-17 19:16:25 +00:00
diosectsize.s	Saved one byte.	2010-07-17 19:07:57 +00:00
diowrite.s
dir.h
dosdetect.s	Set the priority of the main() args constructor to 24 simply be cause most other targets do - and adjust the priority of the dos detection constructor to stay higher than the main() args constructor.	2011-01-29 21:39:17 +00:00
drives.s	Saved two bytes.	2011-01-26 22:11:23 +00:00
exec.s	Improved exec():	2011-02-11 23:22:26 +00:00
filedes.inc
filedes.s
filename.s	Use MLI error names from ProDOS 8 Technical Reference Manual Quick Reference Card (and not Section 4.8 !).	2010-07-17 19:11:51 +00:00
get_ostype.s
gotoxy.s
gotoy.s
home.s
initcwd.s
iobuf.s
joy_stddrv.s	New version from Oliver Schmidt	2005-03-26 17:03:30 +00:00
kbhit.s
mainargs.s	Set the priority of the main() args constructor to 24 simply be cause most other targets do - and adjust the priority of the dos detection constructor to stay higher than the main() args constructor.	2011-01-29 21:39:17 +00:00
Makefile	Removed tgi_load() and all corresponding infrastructure. The idea behind tgi_load() was to be able to describe a TGI mode in a target-neutral way by resolution and colordepth. However it turned out that there arn't any cc65 targets sharing any resolution. As a result the only working target-independent approach for a TGI program is to call tgi_loaddriver(tgi_stddrv); and then look up the resolution provided - and to adapt to that resolution.	2011-05-02 10:38:48 +00:00
mcbdefault.s
mli.inc	Added MACHID - we'll need it sooner or later...	2011-02-11 23:15:20 +00:00
mli.s	Use MLI error names from ProDOS 8 Technical Reference Manual (and ProDOS 8 Technical Note #21).	2010-06-16 21:16:14 +00:00
mouse_stddrv.s
open.s	Introduced constructor to raise the ProDOS 8 file level - and extended the destructor to restore the file level again. This is a prerequisite to allow the upcoming exec() to open a file before the destructors run and continue reading from of it after the destructors have run.	2011-01-29 21:43:26 +00:00
opendir.c	Made use of the new common __directerrno and __mappederrno function.	2010-07-17 19:13:07 +00:00
oserrlist.s	Use MLI error names from ProDOS 8 Technical Reference Manual Quick Reference Card (and not Section 4.8 !).	2010-07-17 19:11:51 +00:00
oserror.s	Use MLI error names from ProDOS 8 Technical Reference Manual Quick Reference Card (and not Section 4.8 !).	2010-07-17 19:11:51 +00:00
randomize.s
rdkey.s	Oliver Schmidt updated the graphics drivers and part of the C library for the	2008-03-16 09:37:22 +00:00
read.s	Clear __oserror on success.	2010-06-15 21:44:18 +00:00
readdir.c
reboot.s
revers.s
rewinddir.c
rootdir.s	Adjusted parameter handling to match prototype.	2010-07-07 22:28:14 +00:00
rwcommon.s	Use MLI error names from ProDOS 8 Technical Reference Manual Quick Reference Card (and not Section 4.8 !).	2010-07-17 19:11:51 +00:00
syschdir.s
sysmkdir.s
sysremove.s
sysrename.s	Save some cycles.	2010-04-22 19:51:34 +00:00
sysrmdir.s
systime.s
sysuname.s
textframe.s
tgi_colors.s	Target-specific black & white values for use by the target-shared TGI kernel	2011-04-25 17:11:23 +00:00
tgi_stddrv.s	Removed tgi_load() and all corresponding infrastructure. The idea behind tgi_load() was to be able to describe a TGI mode in a target-neutral way by resolution and colordepth. However it turned out that there arn't any cc65 targets sharing any resolution. As a result the only working target-independent approach for a TGI program is to call tgi_loaddriver(tgi_stddrv); and then look up the resolution provided - and to adapt to that resolution.	2011-05-02 10:38:48 +00:00
toascii.s	Added toascii().	2011-04-22 12:14:28 +00:00
videomode.s	This is what was actually meant in the first place.	2009-09-30 08:04:34 +00:00
vtabz.s
wherex.s
wherey.s
write.s	Clear __oserror on success.	2010-06-15 21:44:18 +00:00