6502/llvm-6502
1
0
Fork 0
mirror of https://github.com/c64scene-ar/llvm-6502.git synced 2025-02-21 06:30:16 +00:00
Code Issues Projects Releases Wiki Activity
llvm-6502/test/CodeGen/PowerPC/crsave.ll

63 lines
1.7 KiB
LLVM
Raw Normal View History

This patch corrects logic in PPCFrameLowering for save and restore of nonvolatile condition register fields across calls under the SVR4 ABIs. * With the 64-bit ABI, the save location is at a fixed offset of 8 from the stack pointer. The frame pointer cannot be used to access this portion of the stack frame since the distance from the frame pointer may change with alloca calls. * With the 32-bit ABI, the save location is just below the general register save area, and is accessed via the frame pointer like the rest of the save areas. This is an optional slot, so it must only be created if any of CR2, CR3, and CR4 were modified. * For both ABIs, save/restore logic is generated only if one of the nonvolatile CR fields were modified. I also took this opportunity to clean up an extra FIXME in PPCFrameLowering.h. Save area offsets for 32-bit GPRs are meaningless for the 64-bit ABI, so I removed them for correctness and efficiency. Fixes PR13708 and partially also PR13623. It lets us enable exception handling on PPC64. Patch by William J. Schmidt! git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163713 91177308-0d34-0410-b5e6-96231b3b80d8
2012-09-12 14:47:47 +00:00
; RUN: llc -O0 -disable-fp-elim -mtriple=powerpc-unknown-linux-gnu < %s | FileCheck %s -check-prefix=PPC32
Spill and restore PPC CR registers using the FP when we have one For functions that need to spill CRs, and have dynamic stack allocations, the value of the SP during the restore is not what it was during the save, and so we need to use the FP in these cases (as for all of the other spills and restores, but the CR restore has a special code path because its reserved slot, like the link register, is specified directly relative to the adjusted SP). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179457 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-13 08:09:20 +00:00
; RUN: llc -O0 -mtriple=powerpc64-unknown-linux-gnu < %s | FileCheck %s -check-prefix=PPC64
This patch corrects logic in PPCFrameLowering for save and restore of nonvolatile condition register fields across calls under the SVR4 ABIs. * With the 64-bit ABI, the save location is at a fixed offset of 8 from the stack pointer. The frame pointer cannot be used to access this portion of the stack frame since the distance from the frame pointer may change with alloca calls. * With the 32-bit ABI, the save location is just below the general register save area, and is accessed via the frame pointer like the rest of the save areas. This is an optional slot, so it must only be created if any of CR2, CR3, and CR4 were modified. * For both ABIs, save/restore logic is generated only if one of the nonvolatile CR fields were modified. I also took this opportunity to clean up an extra FIXME in PPCFrameLowering.h. Save area offsets for 32-bit GPRs are meaningless for the 64-bit ABI, so I removed them for correctness and efficiency. Fixes PR13708 and partially also PR13623. It lets us enable exception handling on PPC64. Patch by William J. Schmidt! git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163713 91177308-0d34-0410-b5e6-96231b3b80d8
2012-09-12 14:47:47 +00:00
declare void @foo()
Extend test for better coverage. Without this change nothing was covering this addFrameMove: // For 64-bit SVR4 when we have spilled CRs, the spill location // is SP+8, not a frame-relative slot. if (Subtarget.isSVR4ABI() && Subtarget.isPPC64() && (PPC::CR2 <= Reg && Reg <= PPC::CR4)) { MachineLocation CSDst(PPC::X1, 8); MachineLocation CSSrc(PPC::CR2); MMI.addFrameMove(Label, CSDst, CSSrc); continue; } git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181976 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-16 03:48:50 +00:00
define i32 @test_cr2() nounwind uwtable {
This patch corrects logic in PPCFrameLowering for save and restore of nonvolatile condition register fields across calls under the SVR4 ABIs. * With the 64-bit ABI, the save location is at a fixed offset of 8 from the stack pointer. The frame pointer cannot be used to access this portion of the stack frame since the distance from the frame pointer may change with alloca calls. * With the 32-bit ABI, the save location is just below the general register save area, and is accessed via the frame pointer like the rest of the save areas. This is an optional slot, so it must only be created if any of CR2, CR3, and CR4 were modified. * For both ABIs, save/restore logic is generated only if one of the nonvolatile CR fields were modified. I also took this opportunity to clean up an extra FIXME in PPCFrameLowering.h. Save area offsets for 32-bit GPRs are meaningless for the 64-bit ABI, so I removed them for correctness and efficiency. Fixes PR13708 and partially also PR13623. It lets us enable exception handling on PPC64. Patch by William J. Schmidt! git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163713 91177308-0d34-0410-b5e6-96231b3b80d8
2012-09-12 14:47:47 +00:00
entry:
%ret = alloca i32, align 4
%0 = call i32 asm sideeffect "\0A\09mtcr $4\0A\09cmp 2,$2,$1\0A\09mfcr $0", "=r,r,r,r,r,~{cr2}"(i32 1, i32 2, i32 3, i32 0) nounwind
store i32 %0, i32* %ret, align 4
call void @foo()
%1 = load i32* %ret, align 4
ret i32 %1
}
PPC32: Fix stack collision between FP and CR save areas. The changes to CR spill handling missed a case for 32-bit PowerPC. The code in PPCFrameLowering::processFunctionBeforeFrameFinalized() checks whether CR spill has occurred using a flag in the function info. This flag is only set by storeRegToStackSlot and loadRegFromStackSlot. spillCalleeSavedRegisters does not call storeRegToStackSlot, but instead produces MI directly. Thus we don't see the CR is spilled when assigning frame offsets, and the CR spill ends up colliding with some other location (generally the FP slot). This patch sets the flag in spillCalleeSavedRegisters for PPC32 so that the CR spill is properly detected and gets its own slot in the stack frame. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181800 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:08:32 +00:00
; PPC32: stw 31, -4(1)
; PPC32: stwu 1, -32(1)
This patch corrects logic in PPCFrameLowering for save and restore of nonvolatile condition register fields across calls under the SVR4 ABIs. * With the 64-bit ABI, the save location is at a fixed offset of 8 from the stack pointer. The frame pointer cannot be used to access this portion of the stack frame since the distance from the frame pointer may change with alloca calls. * With the 32-bit ABI, the save location is just below the general register save area, and is accessed via the frame pointer like the rest of the save areas. This is an optional slot, so it must only be created if any of CR2, CR3, and CR4 were modified. * For both ABIs, save/restore logic is generated only if one of the nonvolatile CR fields were modified. I also took this opportunity to clean up an extra FIXME in PPCFrameLowering.h. Save area offsets for 32-bit GPRs are meaningless for the 64-bit ABI, so I removed them for correctness and efficiency. Fixes PR13708 and partially also PR13623. It lets us enable exception handling on PPC64. Patch by William J. Schmidt! git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163713 91177308-0d34-0410-b5e6-96231b3b80d8
2012-09-12 14:47:47 +00:00
; PPC32: mfcr 12
PPC32: Fix stack collision between FP and CR save areas. The changes to CR spill handling missed a case for 32-bit PowerPC. The code in PPCFrameLowering::processFunctionBeforeFrameFinalized() checks whether CR spill has occurred using a flag in the function info. This flag is only set by storeRegToStackSlot and loadRegFromStackSlot. spillCalleeSavedRegisters does not call storeRegToStackSlot, but instead produces MI directly. Thus we don't see the CR is spilled when assigning frame offsets, and the CR spill ends up colliding with some other location (generally the FP slot). This patch sets the flag in spillCalleeSavedRegisters for PPC32 so that the CR spill is properly detected and gets its own slot in the stack frame. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181800 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:08:32 +00:00
; PPC32-NEXT: stw 12, 24(31)
; PPC32: lwz 12, 24(31)
This patch corrects logic in PPCFrameLowering for save and restore of nonvolatile condition register fields across calls under the SVR4 ABIs. * With the 64-bit ABI, the save location is at a fixed offset of 8 from the stack pointer. The frame pointer cannot be used to access this portion of the stack frame since the distance from the frame pointer may change with alloca calls. * With the 32-bit ABI, the save location is just below the general register save area, and is accessed via the frame pointer like the rest of the save areas. This is an optional slot, so it must only be created if any of CR2, CR3, and CR4 were modified. * For both ABIs, save/restore logic is generated only if one of the nonvolatile CR fields were modified. I also took this opportunity to clean up an extra FIXME in PPCFrameLowering.h. Save area offsets for 32-bit GPRs are meaningless for the 64-bit ABI, so I removed them for correctness and efficiency. Fixes PR13708 and partially also PR13623. It lets us enable exception handling on PPC64. Patch by William J. Schmidt! git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163713 91177308-0d34-0410-b5e6-96231b3b80d8
2012-09-12 14:47:47 +00:00
; PPC32-NEXT: mtcrf 32, 12
Extend test for better coverage. Without this change nothing was covering this addFrameMove: // For 64-bit SVR4 when we have spilled CRs, the spill location // is SP+8, not a frame-relative slot. if (Subtarget.isSVR4ABI() && Subtarget.isPPC64() && (PPC::CR2 <= Reg && Reg <= PPC::CR4)) { MachineLocation CSDst(PPC::X1, 8); MachineLocation CSSrc(PPC::CR2); MMI.addFrameMove(Label, CSDst, CSSrc); continue; } git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181976 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-16 03:48:50 +00:00
; PPC64: .cfi_startproc
This patch corrects logic in PPCFrameLowering for save and restore of nonvolatile condition register fields across calls under the SVR4 ABIs. * With the 64-bit ABI, the save location is at a fixed offset of 8 from the stack pointer. The frame pointer cannot be used to access this portion of the stack frame since the distance from the frame pointer may change with alloca calls. * With the 32-bit ABI, the save location is just below the general register save area, and is accessed via the frame pointer like the rest of the save areas. This is an optional slot, so it must only be created if any of CR2, CR3, and CR4 were modified. * For both ABIs, save/restore logic is generated only if one of the nonvolatile CR fields were modified. I also took this opportunity to clean up an extra FIXME in PPCFrameLowering.h. Save area offsets for 32-bit GPRs are meaningless for the 64-bit ABI, so I removed them for correctness and efficiency. Fixes PR13708 and partially also PR13623. It lets us enable exception handling on PPC64. Patch by William J. Schmidt! git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163713 91177308-0d34-0410-b5e6-96231b3b80d8
2012-09-12 14:47:47 +00:00
; PPC64: mfcr 12
Fix PPC64 CR spill location for callee-saved registers This fixes an ABI bug for non-Darwin PPC64. For the callee-saved condition registers, the spill location is specified relative to the stack pointer (SP + 8). However, this is not relative to the SP after the new stack frame is established, but instead relative to the caller's stack pointer (it is stored into the linkage area of the parent's stack frame). So, like with the link register, we don't directly spill the CRs with other callee-saved registers, but just mark them to be spilled during prologue generation. In practice, this reverts r179457 for PPC64 (but leaves it in place for PPC32). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179500 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-15 02:07:05 +00:00
; PPC64: stw 12, 8(1)
; PPC64: stdu 1, -[[AMT:[0-9]+]](1)
Extend test for better coverage. Without this change nothing was covering this addFrameMove: // For 64-bit SVR4 when we have spilled CRs, the spill location // is SP+8, not a frame-relative slot. if (Subtarget.isSVR4ABI() && Subtarget.isPPC64() && (PPC::CR2 <= Reg && Reg <= PPC::CR4)) { MachineLocation CSDst(PPC::X1, 8); MachineLocation CSSrc(PPC::CR2); MMI.addFrameMove(Label, CSDst, CSSrc); continue; } git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181976 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-16 03:48:50 +00:00
; PPC64: .cfi_def_cfa_offset 128
; PPC64: .cfi_offset lr, 16
; PPC64: .cfi_offset cr2, 8
Fix PPC64 CR spill location for callee-saved registers This fixes an ABI bug for non-Darwin PPC64. For the callee-saved condition registers, the spill location is specified relative to the stack pointer (SP + 8). However, this is not relative to the SP after the new stack frame is established, but instead relative to the caller's stack pointer (it is stored into the linkage area of the parent's stack frame). So, like with the link register, we don't directly spill the CRs with other callee-saved registers, but just mark them to be spilled during prologue generation. In practice, this reverts r179457 for PPC64 (but leaves it in place for PPC32). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179500 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-15 02:07:05 +00:00
; PPC64: addi 1, 1, [[AMT]]
This patch corrects logic in PPCFrameLowering for save and restore of nonvolatile condition register fields across calls under the SVR4 ABIs. * With the 64-bit ABI, the save location is at a fixed offset of 8 from the stack pointer. The frame pointer cannot be used to access this portion of the stack frame since the distance from the frame pointer may change with alloca calls. * With the 32-bit ABI, the save location is just below the general register save area, and is accessed via the frame pointer like the rest of the save areas. This is an optional slot, so it must only be created if any of CR2, CR3, and CR4 were modified. * For both ABIs, save/restore logic is generated only if one of the nonvolatile CR fields were modified. I also took this opportunity to clean up an extra FIXME in PPCFrameLowering.h. Save area offsets for 32-bit GPRs are meaningless for the 64-bit ABI, so I removed them for correctness and efficiency. Fixes PR13708 and partially also PR13623. It lets us enable exception handling on PPC64. Patch by William J. Schmidt! git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163713 91177308-0d34-0410-b5e6-96231b3b80d8
2012-09-12 14:47:47 +00:00
; PPC64: lwz 12, 8(1)
Fix PPC64 CR spill location for callee-saved registers This fixes an ABI bug for non-Darwin PPC64. For the callee-saved condition registers, the spill location is specified relative to the stack pointer (SP + 8). However, this is not relative to the SP after the new stack frame is established, but instead relative to the caller's stack pointer (it is stored into the linkage area of the parent's stack frame). So, like with the link register, we don't directly spill the CRs with other callee-saved registers, but just mark them to be spilled during prologue generation. In practice, this reverts r179457 for PPC64 (but leaves it in place for PPC32). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179500 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-15 02:07:05 +00:00
; PPC64: mtcrf 32, 12
Extend test for better coverage. Without this change nothing was covering this addFrameMove: // For 64-bit SVR4 when we have spilled CRs, the spill location // is SP+8, not a frame-relative slot. if (Subtarget.isSVR4ABI() && Subtarget.isPPC64() && (PPC::CR2 <= Reg && Reg <= PPC::CR4)) { MachineLocation CSDst(PPC::X1, 8); MachineLocation CSSrc(PPC::CR2); MMI.addFrameMove(Label, CSDst, CSSrc); continue; } git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181976 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-16 03:48:50 +00:00
; PPC64: .cfi_endproc
Spill and restore PPC CR registers using the FP when we have one For functions that need to spill CRs, and have dynamic stack allocations, the value of the SP during the restore is not what it was during the save, and so we need to use the FP in these cases (as for all of the other spills and restores, but the CR restore has a special code path because its reserved slot, like the link register, is specified directly relative to the adjusted SP). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179457 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-13 08:09:20 +00:00
This patch corrects logic in PPCFrameLowering for save and restore of nonvolatile condition register fields across calls under the SVR4 ABIs. * With the 64-bit ABI, the save location is at a fixed offset of 8 from the stack pointer. The frame pointer cannot be used to access this portion of the stack frame since the distance from the frame pointer may change with alloca calls. * With the 32-bit ABI, the save location is just below the general register save area, and is accessed via the frame pointer like the rest of the save areas. This is an optional slot, so it must only be created if any of CR2, CR3, and CR4 were modified. * For both ABIs, save/restore logic is generated only if one of the nonvolatile CR fields were modified. I also took this opportunity to clean up an extra FIXME in PPCFrameLowering.h. Save area offsets for 32-bit GPRs are meaningless for the 64-bit ABI, so I removed them for correctness and efficiency. Fixes PR13708 and partially also PR13623. It lets us enable exception handling on PPC64. Patch by William J. Schmidt! git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163713 91177308-0d34-0410-b5e6-96231b3b80d8
2012-09-12 14:47:47 +00:00
define i32 @test_cr234() nounwind {
entry:
%ret = alloca i32, align 4
%0 = call i32 asm sideeffect "\0A\09mtcr $4\0A\09cmp 2,$2,$1\0A\09cmp 3,$2,$2\0A\09cmp 4,$2,$3\0A\09mfcr $0", "=r,r,r,r,r,~{cr2},~{cr3},~{cr4}"(i32 1, i32 2, i32 3, i32 0) nounwind
store i32 %0, i32* %ret, align 4
call void @foo()
%1 = load i32* %ret, align 4
ret i32 %1
}
PPC32: Fix stack collision between FP and CR save areas. The changes to CR spill handling missed a case for 32-bit PowerPC. The code in PPCFrameLowering::processFunctionBeforeFrameFinalized() checks whether CR spill has occurred using a flag in the function info. This flag is only set by storeRegToStackSlot and loadRegFromStackSlot. spillCalleeSavedRegisters does not call storeRegToStackSlot, but instead produces MI directly. Thus we don't see the CR is spilled when assigning frame offsets, and the CR spill ends up colliding with some other location (generally the FP slot). This patch sets the flag in spillCalleeSavedRegisters for PPC32 so that the CR spill is properly detected and gets its own slot in the stack frame. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181800 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:08:32 +00:00
; PPC32: stw 31, -4(1)
; PPC32: stwu 1, -32(1)
This patch corrects logic in PPCFrameLowering for save and restore of nonvolatile condition register fields across calls under the SVR4 ABIs. * With the 64-bit ABI, the save location is at a fixed offset of 8 from the stack pointer. The frame pointer cannot be used to access this portion of the stack frame since the distance from the frame pointer may change with alloca calls. * With the 32-bit ABI, the save location is just below the general register save area, and is accessed via the frame pointer like the rest of the save areas. This is an optional slot, so it must only be created if any of CR2, CR3, and CR4 were modified. * For both ABIs, save/restore logic is generated only if one of the nonvolatile CR fields were modified. I also took this opportunity to clean up an extra FIXME in PPCFrameLowering.h. Save area offsets for 32-bit GPRs are meaningless for the 64-bit ABI, so I removed them for correctness and efficiency. Fixes PR13708 and partially also PR13623. It lets us enable exception handling on PPC64. Patch by William J. Schmidt! git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163713 91177308-0d34-0410-b5e6-96231b3b80d8
2012-09-12 14:47:47 +00:00
; PPC32: mfcr 12
PPC32: Fix stack collision between FP and CR save areas. The changes to CR spill handling missed a case for 32-bit PowerPC. The code in PPCFrameLowering::processFunctionBeforeFrameFinalized() checks whether CR spill has occurred using a flag in the function info. This flag is only set by storeRegToStackSlot and loadRegFromStackSlot. spillCalleeSavedRegisters does not call storeRegToStackSlot, but instead produces MI directly. Thus we don't see the CR is spilled when assigning frame offsets, and the CR spill ends up colliding with some other location (generally the FP slot). This patch sets the flag in spillCalleeSavedRegisters for PPC32 so that the CR spill is properly detected and gets its own slot in the stack frame. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181800 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-14 16:08:32 +00:00
; PPC32-NEXT: stw 12, 24(31)
; PPC32: lwz 12, 24(31)
This patch corrects logic in PPCFrameLowering for save and restore of nonvolatile condition register fields across calls under the SVR4 ABIs. * With the 64-bit ABI, the save location is at a fixed offset of 8 from the stack pointer. The frame pointer cannot be used to access this portion of the stack frame since the distance from the frame pointer may change with alloca calls. * With the 32-bit ABI, the save location is just below the general register save area, and is accessed via the frame pointer like the rest of the save areas. This is an optional slot, so it must only be created if any of CR2, CR3, and CR4 were modified. * For both ABIs, save/restore logic is generated only if one of the nonvolatile CR fields were modified. I also took this opportunity to clean up an extra FIXME in PPCFrameLowering.h. Save area offsets for 32-bit GPRs are meaningless for the 64-bit ABI, so I removed them for correctness and efficiency. Fixes PR13708 and partially also PR13623. It lets us enable exception handling on PPC64. Patch by William J. Schmidt! git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163713 91177308-0d34-0410-b5e6-96231b3b80d8
2012-09-12 14:47:47 +00:00
; PPC32-NEXT: mtcrf 32, 12
; PPC32-NEXT: mtcrf 16, 12
; PPC32-NEXT: mtcrf 8, 12
; PPC64: mfcr 12
Fix PPC64 CR spill location for callee-saved registers This fixes an ABI bug for non-Darwin PPC64. For the callee-saved condition registers, the spill location is specified relative to the stack pointer (SP + 8). However, this is not relative to the SP after the new stack frame is established, but instead relative to the caller's stack pointer (it is stored into the linkage area of the parent's stack frame). So, like with the link register, we don't directly spill the CRs with other callee-saved registers, but just mark them to be spilled during prologue generation. In practice, this reverts r179457 for PPC64 (but leaves it in place for PPC32). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179500 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-15 02:07:05 +00:00
; PPC64: stw 12, 8(1)
; PPC64: stdu 1, -[[AMT:[0-9]+]](1)
; PPC64: addi 1, 1, [[AMT]]
This patch corrects logic in PPCFrameLowering for save and restore of nonvolatile condition register fields across calls under the SVR4 ABIs. * With the 64-bit ABI, the save location is at a fixed offset of 8 from the stack pointer. The frame pointer cannot be used to access this portion of the stack frame since the distance from the frame pointer may change with alloca calls. * With the 32-bit ABI, the save location is just below the general register save area, and is accessed via the frame pointer like the rest of the save areas. This is an optional slot, so it must only be created if any of CR2, CR3, and CR4 were modified. * For both ABIs, save/restore logic is generated only if one of the nonvolatile CR fields were modified. I also took this opportunity to clean up an extra FIXME in PPCFrameLowering.h. Save area offsets for 32-bit GPRs are meaningless for the 64-bit ABI, so I removed them for correctness and efficiency. Fixes PR13708 and partially also PR13623. It lets us enable exception handling on PPC64. Patch by William J. Schmidt! git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163713 91177308-0d34-0410-b5e6-96231b3b80d8
2012-09-12 14:47:47 +00:00
; PPC64: lwz 12, 8(1)
Fix PPC64 CR spill location for callee-saved registers This fixes an ABI bug for non-Darwin PPC64. For the callee-saved condition registers, the spill location is specified relative to the stack pointer (SP + 8). However, this is not relative to the SP after the new stack frame is established, but instead relative to the caller's stack pointer (it is stored into the linkage area of the parent's stack frame). So, like with the link register, we don't directly spill the CRs with other callee-saved registers, but just mark them to be spilled during prologue generation. In practice, this reverts r179457 for PPC64 (but leaves it in place for PPC32). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179500 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-15 02:07:05 +00:00
; PPC64: mtcrf 32, 12
; PPC64: mtcrf 16, 12
; PPC64: mtcrf 8, 12
Spill and restore PPC CR registers using the FP when we have one For functions that need to spill CRs, and have dynamic stack allocations, the value of the SP during the restore is not what it was during the save, and so we need to use the FP in these cases (as for all of the other spills and restores, but the CR restore has a special code path because its reserved slot, like the link register, is specified directly relative to the adjusted SP). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179457 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-13 08:09:20 +00:00
Reference in New Issue Copy Permalink