[SROA] Apply a somewhat heavy and unpleasant hammer to fix PR22093, an

assert out of the new pre-splitting in SROA.

This fix makes the code do what was originally intended -- when we have
a store of a load both dealing in the same alloca, we force them to both
be pre-split with identical offsets. This is really quite hard to do
because we can keep discovering problems as we go along. We have to
track every load over the current alloca which for any resaon becomes
invalid for pre-splitting, and go back to remove all stores of those
loads. I've included a couple of test cases derived from PR22093 that
cover the different ways this can happen. While that PR only really
triggered the first of these two, its the same fundamental issue.

The other challenge here is documented in a FIXME now. We end up being
quite a bit more aggressive for pre-splitting when loads and stores
don't refer to the same alloca. This aggressiveness comes at the cost of
introducing potentially redundant loads. It isn't clear that this is the
right balance. It might be considerably better to require that we only
do pre-splitting when we can presplit every load and store involved in
the entire operation. That would give more consistent if conservative
results. Unfortunately, it requires a non-trivial change to the actual
pre-splitting operation in order to correctly handle cases where we end
up pre-splitting stores out-of-order. And it isn't 100% clear that this
is the right direction, although I'm starting to suspect that it is.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225149 91177308-0d34-0410-b5e6-96231b3b80d8
This commit is contained in:
Chandler Carruth 2015-01-05 04:17:53 +00:00
parent edef0847bc
commit 4f9a7277d1
2 changed files with 101 additions and 11 deletions

View File

@ -3516,18 +3516,34 @@ bool SROA::presplitLoadsAndStores(AllocaInst &AI, AllocaSlices &AS) {
};
SmallDenseMap<Instruction *, SplitOffsets, 8> SplitOffsetsMap;
// Track loads out of this alloca which cannot, for any reason, be pre-split.
// This is important as we also cannot pre-split stores of those loads!
// FIXME: This is all pretty gross. It means that we can be more aggressive
// in pre-splitting when the load feeding the store happens to come from
// a separate alloca. Put another way, the effectiveness of SROA would be
// decreased by a frontend which just concatenated all of its local allocas
// into one big flat alloca. But defeating such patterns is exactly the job
// SROA is tasked with! Sadly, to not have this discrepancy we would have
// change store pre-splitting to actually force pre-splitting of the load
// that feeds it *and all stores*. That makes pre-splitting much harder, but
// maybe it would make it more principled?
SmallPtrSet<LoadInst *, 8> UnsplittableLoads;
DEBUG(dbgs() << " Searching for candidate loads and stores\n");
for (auto &P : AS.partitions()) {
for (Slice &S : P) {
if (!S.isSplittable())
continue;
if (S.endOffset() <= P.endOffset())
Instruction *I = cast<Instruction>(S.getUse()->getUser());
if (!S.isSplittable() ||S.endOffset() <= P.endOffset()) {
// If this was a load we have to track that it can't participate in any
// pre-splitting!
if (auto *LI = dyn_cast<LoadInst>(I))
UnsplittableLoads.insert(LI);
continue;
}
assert(P.endOffset() > S.beginOffset() &&
"Empty or backwards partition!");
// Determine if this is a pre-splittable slice.
Instruction *I = cast<Instruction>(S.getUse()->getUser());
if (auto *LI = dyn_cast<LoadInst>(I)) {
assert(!LI->isVolatile() && "Cannot split volatile loads!");
@ -3542,8 +3558,10 @@ bool SROA::presplitLoadsAndStores(AllocaInst &AI, AllocaSlices &AS) {
}
return true;
};
if (!IsLoadSimplyStored(LI))
if (!IsLoadSimplyStored(LI)) {
UnsplittableLoads.insert(LI);
continue;
}
Loads.push_back(LI);
} else if (auto *SI = dyn_cast<StoreInst>(S.getUse()->getUser())) {
@ -3597,16 +3615,20 @@ bool SROA::presplitLoadsAndStores(AllocaInst &AI, AllocaSlices &AS) {
// such loads and stores, we can only pre-split them if their splits exactly
// match relative to their starting offset. We have to verify this prior to
// any rewriting.
SmallPtrSet<LoadInst *, 4> BadSplitLoads;
Stores.erase(
std::remove_if(Stores.begin(), Stores.end(),
[&BadSplitLoads, &SplitOffsetsMap](StoreInst *SI) {
[&UnsplittableLoads, &SplitOffsetsMap](StoreInst *SI) {
// Lookup the load we are storing in our map of split
// offsets.
auto *LI = cast<LoadInst>(SI->getValueOperand());
// If it was completely unsplittable, then we're done,
// and this store can't be pre-split.
if (UnsplittableLoads.count(LI))
return true;
auto LoadOffsetsI = SplitOffsetsMap.find(LI);
if (LoadOffsetsI == SplitOffsetsMap.end())
return false; // Unrelated loads are always safe.
return false; // Unrelated loads are definitely safe.
auto &LoadOffsets = LoadOffsetsI->second;
// Now lookup the store's offsets.
@ -3627,16 +3649,30 @@ bool SROA::presplitLoadsAndStores(AllocaInst &AI, AllocaSlices &AS) {
// with mismatched relative splits. Just give up on them
// and remove both instructions from our list of
// candidates.
BadSplitLoads.insert(LI);
UnsplittableLoads.insert(LI);
return true;
}),
Stores.end());
// Now we have to go *back* through all te stores, because a later store may
// have caused an earlier store's load to become unsplittable and if it is
// unsplittable for the later store, then we can't rely on it being split in
// the earlier store either.
Stores.erase(std::remove_if(Stores.begin(), Stores.end(),
[&UnsplittableLoads](StoreInst *SI) {
auto *LI =
cast<LoadInst>(SI->getValueOperand());
return UnsplittableLoads.count(LI);
}),
Stores.end());
// Once we've established all the loads that can't be split for some reason,
// filter any that made it into our list out.
Loads.erase(std::remove_if(Loads.begin(), Loads.end(),
[&BadSplitLoads](LoadInst *LI) {
return BadSplitLoads.count(LI);
[&UnsplittableLoads](LoadInst *LI) {
return UnsplittableLoads.count(LI);
}),
Loads.end());
// If no loads or stores are left, there is no pre-splitting to be done for
// this alloca.
if (Loads.empty() && Stores.empty())

View File

@ -1541,3 +1541,57 @@ entry:
%ret = fadd float %f1, %f2
ret float %ret
}
define i32 @PR22093() {
; Test that we don't try to pre-split a splittable store of a splittable but
; not pre-splittable load over the same alloca. We "handle" this case when the
; load is unsplittable but unrelated to this alloca by just generating extra
; loads without touching the original, but when the original load was out of
; this alloca we need to handle it specially to ensure the splits line up
; properly for rewriting.
;
; CHECK-LABEL: @PR22093(
; CHECK-NOT: alloca
; CHECK: alloca i16
; CHECK-NOT: alloca
; CHECK: store volatile i16
entry:
%a = alloca i32
%a.cast = bitcast i32* %a to i16*
store volatile i16 42, i16* %a.cast
%load = load i32* %a
store i32 %load, i32* %a
ret i32 %load
}
define void @PR22093.2() {
; Another way that we end up being unable to split a particular set of loads
; and stores can even have ordering importance. Here we have a load which is
; pre-splittable by itself, and the first store is also compatible. But the
; second store of the load makes the load unsplittable because of a mismatch of
; splits. Because this makes the load unsplittable, we also have to go back and
; remove the first store from the presplit candidates as its load won't be
; presplit.
;
; CHECK-LABEL: @PR22093.2(
; CHECK-NOT: alloca
; CHECK: alloca i16
; CHECK-NEXT: alloca i8
; CHECK-NOT: alloca
; CHECK: store volatile i16
; CHECK: store volatile i8
entry:
%a = alloca i64
%a.cast1 = bitcast i64* %a to i32*
%a.cast2 = bitcast i64* %a to i16*
store volatile i16 42, i16* %a.cast2
%load = load i32* %a.cast1
store i32 %load, i32* %a.cast1
%a.gep1 = getelementptr i32* %a.cast1, i32 1
%a.cast3 = bitcast i32* %a.gep1 to i8*
store volatile i8 13, i8* %a.cast3
store i32 %load, i32* %a.gep1
ret void
}