6502/llvm-6502
1
0
Fork 0
mirror of https://github.com/c64scene-ar/llvm-6502.git synced 2024-12-26 05:32:25 +00:00
Code Issues Projects Releases Wiki Activity

[LPM] Fix PR18643, another scary place where loop transforms failed to

Browse Source 
preserve loop simplify of enclosing loops.

The problem here starts with LoopRotation which ends up cloning code out
of the latch into the new preheader it is buidling. This can create
a new edge from the preheader into the exit block of the loop which
breaks LoopSimplify form. The code tries to fix this by splitting the
critical edge between the latch and the exit block to get a new exit
block that only the latch dominates. This sadly isn't sufficient.

The exit block may be an exit block for multiple nested loops. When we
clone an edge from the latch of the inner loop to the new preheader
being built in the outer loop, we create an exiting edge from the outer
loop to this exit block. Despite breaking the LoopSimplify form for the
inner loop, this is fine for the outer loop. However, when we split the
edge from the inner loop to the exit block, we create a new block which
is in neither the inner nor outer loop as the new exit block. This is
a predecessor to the old exit block, and so the split itself takes the
outer loop out of LoopSimplify form. We need to split every edge
entering the exit block from inside a loop nested more deeply than the
exit block in order to preserve all of the loop simplify constraints.

Once we try to do that, a problem with splitting critical edges
surfaces. Previously, we tried a very brute force to update LoopSimplify
form by re-computing it for all exit blocks. We don't need to do this,
and doing this much will sometimes but not always overlap with the
LoopRotate bug fix. Instead, the code needs to specifically handle the
cases which can start to violate LoopSimplify -- they aren't that
common. We need to see if the destination of the split edge was a loop
exit block in simplified form for the loop of the source of the edge.
For this to be true, all the predecessors need to be in the exact same
loop as the source of the edge being split. If the dest block was
originally in this form, we have to split all of the deges back into
this loop to recover it. The old mechanism of doing this was
conservatively correct because at least *one* of the exiting blocks it
rewrote was the DestBB and so the DestBB's predecessors were fixed. But
this is a much more targeted way of doing it. Making it targeted is
important, because ballooning the set of edges touched prevents
LoopRotate from being able to split edges *it* needs to split to
preserve loop simplify in a coherent way -- the critical edge splitting
would sometimes find the other edges in need of splitting but not
others.

Many, *many* thanks for help from Nick reducing these test cases
mightily. And helping lots with the analysis here as this one was quite
tricky to track down.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200393 91177308-0d34-0410-b5e6-96231b3b80d8
This commit is contained in:
Chandler Carruth 2014-01-29 13:16:53 +00:00
parent e89e312753
commit a403ceb205
4 changed files with 118 additions and 50 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
lib/Transforms/Scalar/LoopRotation.cpp
View File

@ -463,9 +463,24 @@ bool LoopRotate::rotateLoop(Loop *L, bool SimplifiedLatch) {
NewPH->setName(NewHeader->getName() + ".lr.ph");
// Preserve canonical loop form, which means that 'Exit' should have only
// one predecessor.
BasicBlock *ExitSplit = SplitCriticalEdge(L->getLoopLatch(), Exit, this);
ExitSplit->moveBefore(Exit);
// one predecessor. Note that Exit could be an exit block for multiple
// nested loops, causing both of the edges to now be critical and need to
// be split.
SmallVector<BasicBlock *, 4> ExitPreds(pred_begin(Exit), pred_end(Exit));
bool SplitLatchEdge = false;
for (SmallVectorImpl<BasicBlock *>::iterator PI = ExitPreds.begin(),
PE = ExitPreds.end();
PI != PE; ++PI) {
// We only need to split loop exit edges.
Loop *PredLoop = LI->getLoopFor(*PI);
if (!PredLoop || PredLoop->contains(Exit))
continue;
SplitLatchEdge |= L->getLoopLatch() == *PI;
BasicBlock *ExitSplit = SplitCriticalEdge(*PI, Exit, this);
ExitSplit->moveBefore(Exit);
}
assert(SplitLatchEdge &&
"Despite splitting all preds, failed to split latch exit?");
} else {
// We can fold the conditional branch in the preheader, this makes things
// simpler. The first step is to remove the extra edge to the Exit block.

76
lib/Transforms/Utils/BreakCriticalEdges.cpp
View File

@ -299,9 +299,8 @@ BasicBlock *llvm::SplitCriticalEdge(TerminatorInst *TI, unsigned SuccNum,
P->addBasicBlockToLoop(NewBB, LI->getBase());
}
}
// If TIBB is in a loop and DestBB is outside of that loop, split the
// other exit blocks of the loop that also have predecessors outside
// the loop, to maintain a LoopSimplify guarantee.
// If TIBB is in a loop and DestBB is outside of that loop, we may need
// to update LoopSimplify form and LCSSA form.
if (!TIL->contains(DestBB) &&
P->mustPreserveAnalysisID(LoopSimplifyID)) {
assert(!TIL->contains(NewBB) &&
@ -311,50 +310,35 @@ BasicBlock *llvm::SplitCriticalEdge(TerminatorInst *TI, unsigned SuccNum,
if (P->mustPreserveAnalysisID(LCSSAID))
createPHIsForSplitLoopExit(TIBB, NewBB, DestBB);
// For each unique exit block...
// FIXME: This code is functionally equivalent to the corresponding
// loop in LoopSimplify.
SmallVector<BasicBlock *, 4> ExitBlocks;
TIL->getExitBlocks(ExitBlocks);
for (unsigned i = 0, e = ExitBlocks.size(); i != e; ++i) {
// Collect all the preds that are inside the loop, and note
// whether there are any preds outside the loop.
SmallVector<BasicBlock *, 4> Preds;
bool HasPredOutsideOfLoop = false;
BasicBlock *Exit = ExitBlocks[i];
for (pred_iterator I = pred_begin(Exit), E = pred_end(Exit);
I != E; ++I) {
BasicBlock *P = *I;
if (TIL->contains(P)) {
if (isa<IndirectBrInst>(P->getTerminator())) {
Preds.clear();
break;
}
Preds.push_back(P);
} else {
HasPredOutsideOfLoop = true;
}
}
// If there are any preds not in the loop, we'll need to split
// the edges. The Preds.empty() check is needed because a block
// may appear multiple times in the list. We can't use
// getUniqueExitBlocks above because that depends on LoopSimplify
// form, which we're in the process of restoring!
if (!Preds.empty() && HasPredOutsideOfLoop) {
if (!Exit->isLandingPad()) {
BasicBlock *NewExitBB =
SplitBlockPredecessors(Exit, Preds, "split", P);
if (P->mustPreserveAnalysisID(LCSSAID))
createPHIsForSplitLoopExit(Preds, NewExitBB, Exit);
} else if (SplitLandingPads) {
SmallVector<BasicBlock*, 8> NewBBs;
SplitLandingPadPredecessors(Exit, Preds,
".split1", ".split2",
P, NewBBs);
if (P->mustPreserveAnalysisID(LCSSAID))
createPHIsForSplitLoopExit(Preds, NewBBs[0], Exit);
}
// The only that we can break LoopSimplify form by splitting a critical
// edge is if after the split there exists some edge from TIL to DestBB
// *and* the only edge into DestBB from outside of TIL is that of
// NewBB. If the first isn't true, then LoopSimplify still holds, NewBB
// is the new exit block and it has no non-loop predecessors. If the
// second isn't true, then DestBB was not in LoopSimplify form prior to
// the split as it had a non-loop predecessor. In both of these cases,
// the predecessor must be directly in TIL, not in a subloop, or again
// LoopSimplify doesn't hold.
SmallVector<BasicBlock *, 4> LoopPreds;
for (pred_iterator I = pred_begin(DestBB), E = pred_end(DestBB); I != E;
++I) {
BasicBlock *P = *I;
if (P == NewBB)
continue; // The new block is known.
if (LI->getLoopFor(P) != TIL) {
// No need to re-simplify, it wasn't to start with.
LoopPreds.clear();
break;
}
LoopPreds.push_back(P);
}
if (!LoopPreds.empty()) {
assert(!DestBB->isLandingPad() &&
"We don't split edges to landing pads!");
BasicBlock *NewExitBB =
SplitBlockPredecessors(DestBB, LoopPreds, "split", P);
if (P->mustPreserveAnalysisID(LCSSAID))
createPHIsForSplitLoopExit(LoopPreds, NewExitBB, DestBB);
}
}
// LCSSA form was updated above for the case where LoopSimplify is

6
test/Transforms/LoopRotate/dbgvalue.ll
View File

@ -46,7 +46,11 @@ define void @FindFreeHorzSeg(i64 %startCol, i64 %row, i64* %rowStart) {
; CHECK-LABEL: define void @FindFreeHorzSeg(
; CHECK: %dec = add
; CHECK-NEXT: tail call void @llvm.dbg.value
; CHECK-NEXT: br i1 %tobool, label %for.cond, label %for.end
; CHECK-NEXT: br i1 %tobool, label %for.cond, label %[[LOOP_EXIT:[^,]*]]
; CHECK: [[LOOP_EXIT]]:
; CHECK-NEXT: phi i64 [ %{{[^,]*}}, %{{[^,]*}} ]
; CHECK-NEXT: br label %for.end
entry:
br label %for.cond

65
test/Transforms/LoopRotate/preserve-loop-simplify.ll Normal file
View File

@ -0,0 +1,65 @@
; RUN: opt -S -loop-rotate < %s -verify-loop-info | FileCheck %s
;
; Verify that LoopRotate preserves LoopSimplify form even in very peculiar loop
; structures. We manually validate the CFG with FileCheck because currently we
; can't cause a failure when LoopSimplify fails to be preserved.
define void @PR18643() {
; CHECK-LABEL: @PR18643(
entry:
br label %outer.header
; CHECK: br label %outer.header
outer.header:
; CHECK: outer.header:
br i1 undef, label %inner.header, label %outer.body
; CHECK-NEXT: br i1 {{[^,]*}}, label %[[INNER_PREROTATE_PREHEADER:[^,]*]], label %outer.body
; CHECK: [[INNER_PREROTATE_PREHEADER]]:
; CHECK-NEXT: br i1 {{[^,]*}}, label %[[INNER_PREROTATE_PREHEADER_SPLIT_RETURN:[^,]*]], label %[[INNER_ROTATED_PREHEADER:[^,]*]]
; CHECK: [[INNER_ROTATED_PREHEADER]]:
; CHECK-NEXT: br label %inner.body
inner.header:
; Now the latch!
; CHECK: inner.header:
br i1 undef, label %return, label %inner.body
; CHECK-NEXT: br i1 {{[^,]*}}, label %[[INNER_SPLIT_RETURN:[^,]*]], label %inner.body
inner.body:
; Now the header!
; CHECK: inner.body:
br i1 undef, label %outer.latch, label %inner.latch
; CHECK-NEXT: br i1 {{[^,]*}}, label %[[INNER_SPLIT_OUTER_LATCH:[^,]*]], label %inner.header
inner.latch:
; Dead!
br label %inner.header
outer.body:
; CHECK: outer.body:
br label %outer.latch
; CHECK-NEXT: br label %outer.latch
; L2 -> L1 exit edge needs a simplified exit block.
; CHECK: [[INNER_SPLIT_OUTER_LATCH]]:
; CHECK-NEXT: br label %outer.latch
outer.latch:
; CHECK: outer.latch:
br label %outer.header
; CHECK-NEXT: br label %outer.header
; L1 -> L0 exit edge need sa simplified exit block.
; CHECK: [[INNER_PREROTATE_PREHEADER_SPLIT_RETURN]]:
; CHECK-NEXT: br label %return
; L2 -> L0 exit edge needs a simplified exit block.
; CHECK: [[INNER_SPLIT_RETURN]]:
; CHECK-NEXT: br label %return
return:
; CHECK: return:
unreachable
}