6502/llvm-6502
1
0
Fork 0
mirror of https://github.com/c64scene-ar/llvm-6502.git synced 2025-02-27 02:31:09 +00:00
Code Issues Projects Releases Wiki Activity

Add TargetLowering::prepareVolatileOrAtomicLoad

Browse Source 
One unusual feature of the z architecture is that the result of a
previous load can be reused indefinitely for subsequent loads, even if
a cache-coherent store to that location is performed by another CPU.
A special serializing instruction must be used if you want to force
a load to be reattempted.

Since volatile loads are not supposed to be omitted in this way,
we should insert a serializing instruction before each such load.
The same goes for atomic loads.

The patch implements this at the IR->DAG boundary, in a similar way
to atomic fences.  It is a no-op for targets other than SystemZ.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196906 91177308-0d34-0410-b5e6-96231b3b80d8
This commit is contained in:
Richard Sandiford 2013-12-10 10:49:34 +00:00
parent 086791eca2
commit aedb288d86
15 changed files with 75 additions and 73 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
lib/Target/SystemZ/README.txt
View File

@ -166,13 +166,6 @@ See CodeGen/SystemZ/alloca-01.ll for an example.
--
Atomic loads and stores use the default compare-and-swap based implementation.
This is much too conservative in practice, since the architecture guarantees
that 1-, 2-, 4- and 8-byte loads and stores to aligned addresses are
inherently atomic.
--
If needed, we can support 16-byte atomics using LPQ, STPQ and CSDG.
--

61
lib/Target/SystemZ/SystemZISelLowering.cpp
View File

@ -134,10 +134,10 @@ SystemZTargetLowering::SystemZTargetLowering(SystemZTargetMachine &tm)
setOperationAction(ISD::SDIVREM, VT, Custom);
setOperationAction(ISD::UDIVREM, VT, Custom);
// Expand ATOMIC_LOAD and ATOMIC_STORE using ATOMIC_CMP_SWAP.
// FIXME: probably much too conservative.
setOperationAction(ISD::ATOMIC_LOAD, VT, Expand);
setOperationAction(ISD::ATOMIC_STORE, VT, Expand);
// Lower ATOMIC_LOAD and ATOMIC_STORE into normal volatile loads and
// stores, putting a serialization instruction after the stores.
setOperationAction(ISD::ATOMIC_LOAD, VT, Custom);
setOperationAction(ISD::ATOMIC_STORE, VT, Custom);
// No special instructions for these.
setOperationAction(ISD::CTPOP, VT, Expand);
@ -2001,11 +2001,32 @@ SDValue SystemZTargetLowering::lowerOR(SDValue Op, SelectionDAG &DAG) const {
MVT::i64, HighOp, Low32);
}
// Op is an atomic load. Lower it into a normal volatile load.
SDValue SystemZTargetLowering::lowerATOMIC_LOAD(SDValue Op,
SelectionDAG &DAG) const {
AtomicSDNode *Node = cast<AtomicSDNode>(Op.getNode());
return DAG.getExtLoad(ISD::EXTLOAD, SDLoc(Op), Op.getValueType(),
Node->getChain(), Node->getBasePtr(),
Node->getMemoryVT(), Node->getMemOperand());
}
// Op is an atomic store. Lower it into a normal volatile store followed
// by a serialization.
SDValue SystemZTargetLowering::lowerATOMIC_STORE(SDValue Op,
SelectionDAG &DAG) const {
AtomicSDNode *Node = cast<AtomicSDNode>(Op.getNode());
SDValue Chain = DAG.getTruncStore(Node->getChain(), SDLoc(Op), Node->getVal(),
Node->getBasePtr(), Node->getMemoryVT(),
Node->getMemOperand());
return SDValue(DAG.getMachineNode(SystemZ::Serialize, SDLoc(Op), MVT::Other,
Chain), 0);
}
// Op is an 8-, 16-bit or 32-bit ATOMIC_LOAD_* operation. Lower the first
// two into the fullword ATOMIC_LOADW_* operation given by Opcode.
SDValue SystemZTargetLowering::lowerATOMIC_LOAD(SDValue Op,
SelectionDAG &DAG,
unsigned Opcode) const {
SDValue SystemZTargetLowering::lowerATOMIC_LOAD_OP(SDValue Op,
SelectionDAG &DAG,
unsigned Opcode) const {
AtomicSDNode *Node = cast<AtomicSDNode>(Op.getNode());
// 32-bit operations need no code outside the main loop.
@ -2195,27 +2216,31 @@ SDValue SystemZTargetLowering::LowerOperation(SDValue Op,
case ISD::OR:
return lowerOR(Op, DAG);
case ISD::ATOMIC_SWAP:
return lowerATOMIC_LOAD(Op, DAG, SystemZISD::ATOMIC_SWAPW);
return lowerATOMIC_LOAD_OP(Op, DAG, SystemZISD::ATOMIC_SWAPW);
case ISD::ATOMIC_STORE:
return lowerATOMIC_STORE(Op, DAG);
case ISD::ATOMIC_LOAD:
return lowerATOMIC_LOAD(Op, DAG);
case ISD::ATOMIC_LOAD_ADD:
return lowerATOMIC_LOAD(Op, DAG, SystemZISD::ATOMIC_LOADW_ADD);
return lowerATOMIC_LOAD_OP(Op, DAG, SystemZISD::ATOMIC_LOADW_ADD);
case ISD::ATOMIC_LOAD_SUB:
return lowerATOMIC_LOAD(Op, DAG, SystemZISD::ATOMIC_LOADW_SUB);
return lowerATOMIC_LOAD_OP(Op, DAG, SystemZISD::ATOMIC_LOADW_SUB);
case ISD::ATOMIC_LOAD_AND:
return lowerATOMIC_LOAD(Op, DAG, SystemZISD::ATOMIC_LOADW_AND);
return lowerATOMIC_LOAD_OP(Op, DAG, SystemZISD::ATOMIC_LOADW_AND);
case ISD::ATOMIC_LOAD_OR:
return lowerATOMIC_LOAD(Op, DAG, SystemZISD::ATOMIC_LOADW_OR);
return lowerATOMIC_LOAD_OP(Op, DAG, SystemZISD::ATOMIC_LOADW_OR);
case ISD::ATOMIC_LOAD_XOR:
return lowerATOMIC_LOAD(Op, DAG, SystemZISD::ATOMIC_LOADW_XOR);
return lowerATOMIC_LOAD_OP(Op, DAG, SystemZISD::ATOMIC_LOADW_XOR);
case ISD::ATOMIC_LOAD_NAND:
return lowerATOMIC_LOAD(Op, DAG, SystemZISD::ATOMIC_LOADW_NAND);
return lowerATOMIC_LOAD_OP(Op, DAG, SystemZISD::ATOMIC_LOADW_NAND);
case ISD::ATOMIC_LOAD_MIN:
return lowerATOMIC_LOAD(Op, DAG, SystemZISD::ATOMIC_LOADW_MIN);
return lowerATOMIC_LOAD_OP(Op, DAG, SystemZISD::ATOMIC_LOADW_MIN);
case ISD::ATOMIC_LOAD_MAX:
return lowerATOMIC_LOAD(Op, DAG, SystemZISD::ATOMIC_LOADW_MAX);
return lowerATOMIC_LOAD_OP(Op, DAG, SystemZISD::ATOMIC_LOADW_MAX);
case ISD::ATOMIC_LOAD_UMIN:
return lowerATOMIC_LOAD(Op, DAG, SystemZISD::ATOMIC_LOADW_UMIN);
return lowerATOMIC_LOAD_OP(Op, DAG, SystemZISD::ATOMIC_LOADW_UMIN);
case ISD::ATOMIC_LOAD_UMAX:
return lowerATOMIC_LOAD(Op, DAG, SystemZISD::ATOMIC_LOADW_UMAX);
return lowerATOMIC_LOAD_OP(Op, DAG, SystemZISD::ATOMIC_LOADW_UMAX);
case ISD::ATOMIC_CMP_SWAP:
return lowerATOMIC_CMP_SWAP(Op, DAG);
case ISD::STACKSAVE:

6
lib/Target/SystemZ/SystemZISelLowering.h
View File

@ -276,8 +276,10 @@ private:
SDValue lowerUDIVREM(SDValue Op, SelectionDAG &DAG) const;
SDValue lowerBITCAST(SDValue Op, SelectionDAG &DAG) const;
SDValue lowerOR(SDValue Op, SelectionDAG &DAG) const;
SDValue lowerATOMIC_LOAD(SDValue Op, SelectionDAG &DAG,
unsigned Opcode) const;
SDValue lowerATOMIC_LOAD(SDValue Op, SelectionDAG &DAG) const;
SDValue lowerATOMIC_STORE(SDValue Op, SelectionDAG &DAG) const;
SDValue lowerATOMIC_LOAD_OP(SDValue Op, SelectionDAG &DAG,
unsigned Opcode) const;
SDValue lowerATOMIC_CMP_SWAP(SDValue Op, SelectionDAG &DAG) const;
SDValue lowerLOAD_SEQUENCE_POINT(SDValue Op, SelectionDAG &DAG) const;
SDValue lowerSTACKSAVE(SDValue Op, SelectionDAG &DAG) const;

5
test/CodeGen/SystemZ/atomic-load-01.ll
View File

@ -2,11 +2,10 @@
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s
; This is just a placeholder to make sure that loads are handled.
; The CS-based sequence is probably far too conservative.
define i8 @f1(i8 *%src) {
; CHECK-LABEL: f1:
; CHECK: cs
; CHECK: bcr 1{{[45]}}, %r0
; CHECK: lb %r2, 0(%r2)
; CHECK: br %r14
%val = load atomic i8 *%src seq_cst, align 1
ret i8 %val

5
test/CodeGen/SystemZ/atomic-load-02.ll
View File

@ -2,11 +2,10 @@
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s
; This is just a placeholder to make sure that loads are handled.
; The CS-based sequence is probably far too conservative.
define i16 @f1(i16 *%src) {
; CHECK-LABEL: f1:
; CHECK: cs
; CHECK: bcr 1{{[45]}}, %r0
; CHECK: lh %r2, 0(%r2)
; CHECK: br %r14
%val = load atomic i16 *%src seq_cst, align 2
ret i16 %val

8
test/CodeGen/SystemZ/atomic-load-03.ll
View File

@ -2,12 +2,10 @@
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s
; This is just a placeholder to make sure that loads are handled.
; Using CS is probably too conservative.
define i32 @f1(i32 %dummy, i32 *%src) {
define i32 @f1(i32 *%src) {
; CHECK-LABEL: f1:
; CHECK: lhi %r2, 0
; CHECK: cs %r2, %r2, 0(%r3)
; CHECK: bcr 1{{[45]}}, %r0
; CHECK: l %r2, 0(%r2)
; CHECK: br %r14
%val = load atomic i32 *%src seq_cst, align 4
ret i32 %val

8
test/CodeGen/SystemZ/atomic-load-04.ll
View File

@ -2,12 +2,10 @@
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s
; This is just a placeholder to make sure that loads are handled.
; Using CSG is probably too conservative.
define i64 @f1(i64 %dummy, i64 *%src) {
define i64 @f1(i64 *%src) {
; CHECK-LABEL: f1:
; CHECK: lghi %r2, 0
; CHECK: csg %r2, %r2, 0(%r3)
; CHECK: bcr 1{{[45]}}, %r0
; CHECK: lg %r2, 0(%r2)
; CHECK: br %r14
%val = load atomic i64 *%src seq_cst, align 8
ret i64 %val

5
test/CodeGen/SystemZ/atomic-store-01.ll
View File

@ -2,11 +2,10 @@
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s
; This is just a placeholder to make sure that stores are handled.
; The CS-based sequence is probably far too conservative.
define void @f1(i8 %val, i8 *%src) {
; CHECK-LABEL: f1:
; CHECK: cs
; CHECK: stc %r2, 0(%r3)
; CHECK: bcr 1{{[45]}}, %r0
; CHECK: br %r14
store atomic i8 %val, i8 *%src seq_cst, align 1
ret void

5
test/CodeGen/SystemZ/atomic-store-02.ll
View File

@ -2,11 +2,10 @@
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s
; This is just a placeholder to make sure that stores are handled.
; The CS-based sequence is probably far too conservative.
define void @f1(i16 %val, i16 *%src) {
; CHECK-LABEL: f1:
; CHECK: cs
; CHECK: sth %r2, 0(%r3)
; CHECK: bcr 1{{[45]}}, %r0
; CHECK: br %r14
store atomic i16 %val, i16 *%src seq_cst, align 2
ret void

8
test/CodeGen/SystemZ/atomic-store-03.ll
View File

@ -2,14 +2,10 @@
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s
; This is just a placeholder to make sure that stores are handled.
; Using CS is probably too conservative.
define void @f1(i32 %val, i32 *%src) {
; CHECK-LABEL: f1:
; CHECK: l %r0, 0(%r3)
; CHECK: [[LABEL:\.[^:]*]]:
; CHECK: cs %r0, %r2, 0(%r3)
; CHECK: jl [[LABEL]]
; CHECK: st %r2, 0(%r3)
; CHECK: bcr 1{{[45]}}, %r0
; CHECK: br %r14
store atomic i32 %val, i32 *%src seq_cst, align 4
ret void

8
test/CodeGen/SystemZ/atomic-store-04.ll
View File

@ -2,14 +2,10 @@
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s
; This is just a placeholder to make sure that stores are handled.
; Using CS is probably too conservative.
define void @f1(i64 %val, i64 *%src) {
; CHECK-LABEL: f1:
; CHECK: lg %r0, 0(%r3)
; CHECK: [[LABEL:\.[^:]*]]:
; CHECK: csg %r0, %r2, 0(%r3)
; CHECK: jl [[LABEL]]
; CHECK: stg %r2, 0(%r3)
; CHECK: bcr 1{{[45]}}, %r0
; CHECK: br %r14
store atomic i64 %val, i64 *%src seq_cst, align 8
ret void

7
test/CodeGen/SystemZ/cond-store-01.ll
View File

@ -347,11 +347,10 @@ define void @f19(i8 *%ptr, i8 %alt, i32 %limit) {
define void @f20(i8 *%ptr, i8 %alt, i32 %limit) {
; FIXME: should use a normal load instead of CS.
; CHECK-LABEL: f20:
; CHECK: cs {{%r[0-9]+}},
; CHECK: jl
; CHECK: lb {{%r[0-9]+}}, 0(%r2)
; CHECK: {{jl|jnl}} [[LABEL:[^ ]*]]
; CHECK: [[LABEL]]:
; CHECK: stc {{%r[0-9]+}},
; CHECK: stc {{%r[0-9]+}}, 0(%r2)
; CHECK: br %r14
%cond = icmp ult i32 %limit, 420
%orig = load atomic i8 *%ptr unordered, align 1
@ -367,7 +366,7 @@ define void @f21(i8 *%ptr, i8 %alt, i32 %limit) {
; CHECK: jhe [[LABEL:[^ ]*]]
; CHECK: lb %r3, 0(%r2)
; CHECK: [[LABEL]]:
; CHECK: cs {{%r[0-9]+}},
; CHECK: stc %r3, 0(%r2)
; CHECK: br %r14
%cond = icmp ult i32 %limit, 420
%orig = load i8 *%ptr

7
test/CodeGen/SystemZ/cond-store-02.ll
View File

@ -347,11 +347,10 @@ define void @f19(i16 *%ptr, i16 %alt, i32 %limit) {
define void @f20(i16 *%ptr, i16 %alt, i32 %limit) {
; FIXME: should use a normal load instead of CS.
; CHECK-LABEL: f20:
; CHECK: cs {{%r[0-9]+}},
; CHECK: jl
; CHECK: lh {{%r[0-9]+}}, 0(%r2)
; CHECK: {{jl|jnl}} [[LABEL:[^ ]*]]
; CHECK: [[LABEL]]:
; CHECK: sth {{%r[0-9]+}},
; CHECK: sth {{%r[0-9]+}}, 0(%r2)
; CHECK: br %r14
%cond = icmp ult i32 %limit, 420
%orig = load atomic i16 *%ptr unordered, align 2
@ -367,7 +366,7 @@ define void @f21(i16 *%ptr, i16 %alt, i32 %limit) {
; CHECK: jhe [[LABEL:[^ ]*]]
; CHECK: lh %r3, 0(%r2)
; CHECK: [[LABEL]]:
; CHECK: cs {{%r[0-9]+}},
; CHECK: sth %r3, 0(%r2)
; CHECK: br %r14
%cond = icmp ult i32 %limit, 420
%orig = load i16 *%ptr

4
test/CodeGen/SystemZ/cond-store-03.ll
View File

@ -272,7 +272,7 @@ define void @f15(i32 *%ptr, i32 %alt, i32 %limit) {
define void @f16(i32 *%ptr, i32 %alt, i32 %limit) {
; FIXME: should use a normal load instead of CS.
; CHECK-LABEL: f16:
; CHECK: cs {{%r[0-5]}}, {{%r[0-5]}}, 0(%r2)
; CHECK: l {{%r[0-5]}}, 0(%r2)
; CHECK: {{jl|jnl}} [[LABEL:[^ ]*]]
; CHECK: [[LABEL]]:
; CHECK: st {{%r[0-5]}}, 0(%r2)
@ -291,7 +291,7 @@ define void @f17(i32 *%ptr, i32 %alt, i32 %limit) {
; CHECK: jhe [[LABEL:[^ ]*]]
; CHECK: l %r3, 0(%r2)
; CHECK: [[LABEL]]:
; CHECK: cs {{%r[0-5]}}, %r3, 0(%r2)
; CHECK: st %r3, 0(%r2)
; CHECK: br %r14
%cond = icmp ult i32 %limit, 420
%orig = load i32 *%ptr

4
test/CodeGen/SystemZ/cond-store-04.ll
View File

@ -164,7 +164,7 @@ define void @f9(i64 *%ptr, i64 %alt, i32 %limit) {
define void @f10(i64 *%ptr, i64 %alt, i32 %limit) {
; FIXME: should use a normal load instead of CSG.
; CHECK-LABEL: f10:
; CHECK: csg {{%r[0-5]}}, {{%r[0-5]}}, 0(%r2)
; CHECK: lg {{%r[0-5]}}, 0(%r2)
; CHECK: {{jl|jnl}} [[LABEL:[^ ]*]]
; CHECK: [[LABEL]]:
; CHECK: stg {{%r[0-5]}}, 0(%r2)
@ -183,7 +183,7 @@ define void @f11(i64 *%ptr, i64 %alt, i32 %limit) {
; CHECK: jhe [[LABEL:[^ ]*]]
; CHECK: lg %r3, 0(%r2)
; CHECK: [[LABEL]]:
; CHECK: csg {{%r[0-5]}}, %r3, 0(%r2)
; CHECK: stg %r3, 0(%r2)
; CHECK: br %r14
%cond = icmp ult i32 %limit, 420
%orig = load i64 *%ptr