Summary:
This patch adds legalization support to operate on FP16 as a load/store type
and do operations on it as floats.
Tests for ARM are added to test/CodeGen/ARM/fp16-promote.ll
Reviewers: srhines, t.p.northover
Differential Revision: http://reviews.llvm.org/D8755
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235215 91177308-0d34-0410-b5e6-96231b3b80d8
The only type that isn't an integer, isn't floating point, and isn't
a vector; ladies and gentlemen, the gift that keeps on giving: x86_mmx!
Fixes PR23246.
Original message (reverted in r235062):
[CodeGen] Combine concat_vectors of scalars into build_vector.
Combine something like:
(v8i8 concat_vectors (v2i8 bitcast (i16)) x4)
into:
(v8i8 (bitcast (v4i16 BUILD_VECTOR (i16) x4)))
If any of the scalars are floating point, use that throughout.
Differential Revision: http://reviews.llvm.org/D8948
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235072 91177308-0d34-0410-b5e6-96231b3b80d8
Combine something like:
(v8i8 concat_vectors (v2i8 bitcast (i16)) x4)
into:
(v8i8 (bitcast (v4i16 BUILD_VECTOR (i16) x4)))
If any of the scalars are floating point, use that throughout.
Differential Revision: http://reviews.llvm.org/D8948
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234809 91177308-0d34-0410-b5e6-96231b3b80d8
We already do:
concat_vectors(scalar, undef) -> scalar_to_vector(scalar)
When the scalar is legal.
When it's not, but is a truncated legal scalar, we can also do:
concat_vectors(trunc(scalar), undef) -> scalar_to_vector(scalar)
Which is equivalent, since the upper lanes are undef anyway.
While there, teach the combine to look at more than 2 operands.
Differential Revision: http://reviews.llvm.org/D8883
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234530 91177308-0d34-0410-b5e6-96231b3b80d8
The bug manifests when there are two loads and two stores chained as follows in
a DAG,
(ld v3f32) -> (st f32) -> (ld v3f32) -> (st f32)
and the stores' values are extracted from the preceding vector loads.
MergeConsecutiveStores would replace the first store in the chain with the
merged vector store, which would create a cycle between the merged store node
and the last load node that appears in the chain.
This commits fixes the bug by replacing the last store in the chain instead.
rdar://problem/20275084
Differential Revision: http://reviews.llvm.org/D8849
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234430 91177308-0d34-0410-b5e6-96231b3b80d8
Scalar integers are commuted to move constants to the RHS for re-association - this ensures vectors do the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234092 91177308-0d34-0410-b5e6-96231b3b80d8
This patch attempts to fold the shuffling of 'scalar source' inputs - BUILD_VECTOR and SCALAR_TO_VECTOR nodes - if the shuffle node is the only user. This folds away a lot of unnecessary shuffle nodes, and allows quite a bit of constant folding that was being missed.
Differential Revision: http://reviews.llvm.org/D8516
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234004 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombiner::ReassociateOps was correctly testing for an constant integer scalar but failed to correctly test for constant integer vectors (it was testing for any constant vector).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233482 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds supports for the vector constant folding of TRUNCATE and FP_EXTEND instructions and tidies up the SINT_TO_FP and UINT_TO_FP instructions to match.
It also moves the vector constant folding for the FNEG and FABS instructions to use the DAG.getNode() functionality like the other unary instructions.
Differential Revision: http://reviews.llvm.org/D8593
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233224 91177308-0d34-0410-b5e6-96231b3b80d8
Reverts the code change from r221168 and the relevant test.
It was a mistake to disable the combiner, and based on the ultimate
definition of 'optnone' we shouldn't have considered the test case
as failing in the first place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233153 91177308-0d34-0410-b5e6-96231b3b80d8
This is very related to the bug fixed in r174431. The problem is that
SelectionDAG does not include alignment in the uniquing of loads and
stores. When an otherwise no-op DAGCombine would increase the alignment
of a load or store, the original node would be returned (with the
alignment increased), which would cause the node not to be processed by
any further DAGCombines.
I don't have a direct testcase for this that manifests on an in-tree
target, but I did see some noise in the tests for other targets and have
updated them for it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232780 91177308-0d34-0410-b5e6-96231b3b80d8
Targets which provide a rotate make it possible to replace a sequence of
(XOR (SHL 1, x), -1) with (ROTL ~1, x). This saves an instruction on
architectures like X86 and POWER(64).
Differential Revision: http://reviews.llvm.org/D8350
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232572 91177308-0d34-0410-b5e6-96231b3b80d8
We have an increasing number of cases where we are creating commuted shuffle masks - all implementing nearly the same code.
This patch adds a static helper function - ShuffleVectorSDNode::commuteMask() and replaces a number of cases to use it.
Differential Revision: http://reviews.llvm.org/D8139
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231581 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes the logic in the DAGCombiner that folds an AND node according
to rule: (and (X (load V)), C) -> (X (load V))
An AND between a vector load 'X' and a constant build_vector 'C' can be folded
into the load itself only if we can prove that the AND operation is redundant.
The algorithm implemented by 'visitAND' firstly computes the splat value 'S'
from C, and then checks if S has the lower 'B' bits set (where B is the size in
bits of the vector element type). The algorithm takes into account also the
'undef' bits in the splat mask.
Unfortunately, the algorithm only worked under the assumption that the size of S
is a multiple of the vector element type. With this patch, we conservatively
avoid folding the AND if the splat bits are not compatible with the vector
element type.
Added X86 test and-load-fold.ll
Differential Revision: http://reviews.llvm.org/D8085
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231563 91177308-0d34-0410-b5e6-96231b3b80d8
This patch attempts to convert a SCALAR_TO_VECTOR using an operand from an EXTRACT_VECTOR_ELT into a VECTOR_SHUFFLE.
This prevents many cases of spilling scalar data between the gpr + simd registers.
At present the optimization only accepts cases where there is no TRUNC of the scalar type (i.e. all types must match).
Differential Revision: http://reviews.llvm.org/D8132
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231554 91177308-0d34-0410-b5e6-96231b3b80d8
This is based on the following equivalences:
select(C0 & C1, X, Y) <=> select(C0, select(C1, X, Y), Y)
select(C0 | C1, X, Y) <=> select(C0, X, select(C1, X, Y))
Many target cannot perform and/or on the CPU flags and therefore the
right side should be choosen to avoid materializign the i1 flags in an
integer register. If the target can perform this operation efficiently
we normalize to the left form.
Differential Revision: http://reviews.llvm.org/D7622
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231507 91177308-0d34-0410-b5e6-96231b3b80d8
This is in preparation for changing visitSELECT to normalize towards
select(Cond0, select(Cond1, X, Y), Y);
select(Cond0, X, select(Cond1, X, Y)) which perfom an implicit and/or of
the conditions.
The factored function contains all DAGCombine rules which reduce two values
combined by an And/Or operation to a single value. This does not include rules
involving constants as visitSELECT already handles that case.
Differential Revision: http://reviews.llvm.org/D8026
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231506 91177308-0d34-0410-b5e6-96231b3b80d8
Currently shuffles may only be combined if they are of the same type, despite the fact that bitcasts are often introduced in between shuffle nodes (e.g. x86 shuffle type widening).
This patch allows a single input shuffle to peek through bitcasts and if the input is another shuffle will merge them, shuffling using the smallest sized type, and re-applying the bitcasts at the inputs and output instead.
Dropped old ShuffleToZext test - this patch removes the use of the zext and vector-zext.ll covers these anyhow.
Differential Revision: http://reviews.llvm.org/D7939
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231380 91177308-0d34-0410-b5e6-96231b3b80d8
When trying to convert a BUILD_VECTOR into a shuffle, we try to split a single source vector that is twice as wide as the destination vector.
We can not do this when we also need the zero vector to create a blend.
This fixes PR22774.
Differential Revision: http://reviews.llvm.org/D8040
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231219 91177308-0d34-0410-b5e6-96231b3b80d8
Accidentally committed a few more of these cleanup changes than
intended. Still breaking these out & tidying them up.
This reverts commit r231135.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231136 91177308-0d34-0410-b5e6-96231b3b80d8
There doesn't seem to be any need to assert that iterator assignment is
between iterators over the same node - if you want to reuse an iterator
variable to iterate another node, that's perfectly acceptable. Just
don't mix comparisons between iterators into disjoint sequences, as
usual.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231135 91177308-0d34-0410-b5e6-96231b3b80d8
have the debugger step through each one individually. Turn off the
combine for adjacent stores at -O0 so we get this behavior.
Possibly, DAGCombine shouldn't run at all at -O0, but that's for
another day; see PR22346.
Differential Revision: http://reviews.llvm.org/D7181
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230659 91177308-0d34-0410-b5e6-96231b3b80d8
Author: Simon Pilgrim <llvm-dev@redking.me.uk>
Date: Mon Feb 23 23:04:28 2015 +0000
Fix based on post-commit comment on D7816 & rL230177 - BUILD_VECTOR operand truncation was using the the BV's output scalar type instead of the input type.
and
Author: Simon Pilgrim <llvm-dev@redking.me.uk>
Date: Sun Feb 22 18:17:28 2015 +0000
[DagCombiner] Generalized BuildVector Vector Concatenation
The CONCAT_VECTORS combiner pass can transform the concat of two BUILD_VECTOR nodes into a single BUILD_VECTOR node.
This patch generalises this to support any number of BUILD_VECTOR nodes, and also permits UNDEF nodes to be included as well.
This was noticed as AVX vec128 -> vec256 canonicalization sometimes creates a CONCAT_VECTOR with a real vec128 lower and an vec128 UNDEF upper.
Differential Revision: http://reviews.llvm.org/D7816
as the root cause of PR22678 which is causing an assertion inside the DAG combiner.
I'll follow up to the main thread as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230358 91177308-0d34-0410-b5e6-96231b3b80d8
The CONCAT_VECTORS combiner pass can transform the concat of two BUILD_VECTOR nodes into a single BUILD_VECTOR node.
This patch generalises this to support any number of BUILD_VECTOR nodes, and also permits UNDEF nodes to be included as well.
This was noticed as AVX vec128 -> vec256 canonicalization sometimes creates a CONCAT_VECTOR with a real vec128 lower and an vec128 UNDEF upper.
Differential Revision: http://reviews.llvm.org/D7816
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230177 91177308-0d34-0410-b5e6-96231b3b80d8
DAGCombine will rewrite an BUILD_VECTOR where all non-undef inputs some from
[US]INT_TO_FP, as a BUILD_VECTOR of integers with the conversion applied as a
vector operation. We check operation legality of the conversion, but fail to
check legality of the integer vector type itself. Because targets don't
normally override operation legality defaults for illegal types, we need to
check this also.
This came up in the context of the QPX vector entensions for PowerPC (which can
have legal floating-point vector types without corresponding legal integer
vector types). No in-tree test case for this yes, but one can be added once
the QPX support has been committed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230176 91177308-0d34-0410-b5e6-96231b3b80d8
