Summary:
We need to add a runtime memcheck for pair of accesses (x,y) where at least one of x and y
are writes.
Assuming we have w writes and r reads, currently this number is estimated as being
w* (w+r-1). This estimation will count (write,write) pairs twice and will overestimate
the number of checks required.
This change adds a getNumberOfChecks method to RuntimePointerCheck, which
will count the number of runtime checks needed (similar in implementation to
needsAnyChecking) and uses it to produce the correct number of runtime checks.
Test Plan:
llvm test suite
spec2k
spec2k6
Performance results: no changes observed (not surprising since the formula for 1 writer is basically the same, which would covers most cases - at least with the current check limit).
Reviewers: anemet
Reviewed By: anemet
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D10217
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239295 91177308-0d34-0410-b5e6-96231b3b80d8
When dependence analysis encounters a non-constant distance between
memory accesses it aborts the analysis and falls back to run-time checks
only. In this case we weren't resetting the array of dependences.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237574 91177308-0d34-0410-b5e6-96231b3b80d8
"Store to invariant address..." is moved as the last line. This is not
the prime result of the analysis. Plus it simplifies some of the tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237573 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically, if a pointer accesses different underlying objects in each
iteration, don't look through the phi node defining the pointer.
The motivating case is the underlyling-objects-2.ll testcase. Consider
the loop nest:
int **A;
for (i)
for (j)
A[i][j] = A[i-1][j] * B[j]
This loop is transformed by Load-PRE to stash away A[i] for the next
iteration of the outer loop:
Curr = A[0]; // Prev_0
for (i: 1..N) {
Prev = Curr; // Prev = PHI (Prev_0, Curr)
Curr = A[i];
for (j: 0..N)
Curr[j] = Prev[j] * B[j]
}
Since A[i] and A[i-1] are likely to be independent pointers,
getUnderlyingObjects should not assume that Curr and Prev share the same
underlying object in the inner loop.
If it did we would try to dependence-analyze Curr and Prev and the
analysis of the corresponding SCEVs would fail with non-constant
distance.
To fix this, the getUnderlyingObjects API is extended with an optional
LoopInfo parameter. This is effectively what controls whether we want
the above behavior or the original. Currently, I only changed to use
this approach for LoopAccessAnalysis.
The other testcase is to guard the opposite case where we do want to
look through the loop PHI. If we step through an array by incrementing
a pointer, the underlying object is the incoming value of the phi as the
loop is entered.
Fixes rdar://problem/19566729
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235634 91177308-0d34-0410-b5e6-96231b3b80d8
Fix oversight in -analyze output. PtrRtCheck contains the pointers that
need to be checked against each other and not whether memchecks are
necessary.
For instance in the testcase PtrRtCheck has four elements but all
no-alias so no checking is necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234833 91177308-0d34-0410-b5e6-96231b3b80d8
(Re-apply r234361 with a fix and a testcase for PR23157)
Both run-time pointer checking and the dependence analysis are capable
of dealing with uniform addresses. I.e. it's really just an orthogonal
property of the loop that the analysis computes.
Run-time pointer checking will only try to reason about SCEVAddRec
pointers or else gives up. If the uniform pointer turns out the be a
SCEVAddRec in an outer loop, the run-time checks generated will be
correct (start and end bounds would be equal).
In case of the dependence analysis, we work again with SCEVs. When
compared against a loop-dependent address of the same underlying object,
the difference of the two SCEVs won't be constant. This will result in
returning an Unknown dependence for the pair.
When compared against another uniform access, the difference would be
constant and we should return the right type of dependence
(forward/backward/etc).
The changes also adds support to query this property of the loop and
modify the vectorizer to use this.
Patch by Ashutosh Nema!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234424 91177308-0d34-0410-b5e6-96231b3b80d8
Both run-time pointer checking and the dependence analysis are capable
of dealing with uniform addresses. I.e. it's really just an orthogonal
property of the loop that the analysis computes.
Run-time pointer checking will only try to reason about SCEVAddRec
pointers or else gives up. If the uniform pointer turns out the be a
SCEVAddRec in an outer loop, the run-time checks generated will be
correct (start and end bounds would be equal).
In case of the dependence analysis, we work again with SCEVs. When
compared against a loop-dependent address of the same underlying object,
the difference of the two SCEVs won't be constant. This will result in
returning an Unknown dependence for the pair.
When compared against another uniform access, the difference would be
constant and we should return the right type of dependence
(forward/backward/etc).
The changes also adds support to query this property of the loop and
modify the vectorizer to use this.
Patch by Ashutosh Nema!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234361 91177308-0d34-0410-b5e6-96231b3b80d8
The dependences are now expose through the new getInterestingDependences
API so we can use that with -analyze too and fix the FIXME.
This lets us remove the test that relied on -debug to check the
dependences.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231807 91177308-0d34-0410-b5e6-96231b3b80d8
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
accesses are via different types
Noticed this while generalizing the code for loop distribution.
I confirmed with Arnold that this was indeed a bug and managed to create
a testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230647 91177308-0d34-0410-b5e6-96231b3b80d8
The LoopInfo in combination with depth_first is used to enumerate the
loops.
Right now -analyze is not yet complete. It only prints the result of
the analysis, the report and the run-time checks. Printing the unsafe
depedences will require a bit more reshuffling which I'd like to do in a
follow-on to this patchset. Unsafe dependences are currently checked
via -debug-only=loop-accesses in the new test.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229898 91177308-0d34-0410-b5e6-96231b3b80d8
r229622: "[LoopAccesses] Make VectorizerParams global"
r229623: "[LoopAccesses] Stash the report from the analysis rather than emitting it"
r229624: "[LoopAccesses] Cache the result of canVectorizeMemory"
r229626: "[LoopAccesses] Create the analysis pass"
r229628: "[LoopAccesses] Change debug messages from LV to LAA"
r229630: "[LoopAccesses] Add canAnalyzeLoop"
r229631: "[LoopAccesses] Add missing const to APIs in VectorizationReport"
r229632: "[LoopAccesses] Split out LoopAccessReport from VectorizerReport"
r229633: "[LoopAccesses] Add -analyze support"
r229634: "[LoopAccesses] Change LAA:getInfo to return a constant reference"
r229638: "Analysis: fix buildbots"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229650 91177308-0d34-0410-b5e6-96231b3b80d8
The LoopInfo in combination with depth_first is used to enumerate the
loops.
Right now -analyze is not yet complete. It only prints the result of
the analysis, the report and the run-time checks. Printing the unsafe
depedences will require a bit more reshuffling which I'd like to do in a
follow-on to this patchset. Unsafe dependences are currently checked
via -debug-only=loop-accesses in the new test.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229633 91177308-0d34-0410-b5e6-96231b3b80d8