This introduces new instructions neccessary to implement MSVC-compatible
exception handling support. Most of the middle-end and none of the
back-end haven't been audited or updated to take them into account.
Differential Revision: http://reviews.llvm.org/D11097
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243766 91177308-0d34-0410-b5e6-96231b3b80d8
The patch changes the SLPVectorizer::vectorizeStores to choose the immediate
succeeding or preceding candidate for a store instruction when it has multiple
consecutive candidates. In this way it has better chance to find more slp
vectorization opportunities.
Differential Revision: http://reviews.llvm.org/D10445
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243666 91177308-0d34-0410-b5e6-96231b3b80d8
The reason I was passing this vector by value in the constructor so that
I wouldn't have to copy when initializing the corresponding member but
then I forgot the std::move.
The use-case is LoopDistribution which filters the checks then
std::moves it to LoopVersioning's constructor. With this interface we
can avoid any copies.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243616 91177308-0d34-0410-b5e6-96231b3b80d8
Before, we were passing the pointer partitions to LAA. Now, we get all
the checks from LAA and filter out the checks within partitions in
LoopDistribution.
This effectively concludes the steps to move filtering memchecks from
LAA into its clients. There is still some cleanup left to remove the
unused interfaces in LAA that still take PtrPartition.
(Moving this functionality to LoopDistribution also requires
needsChecking on pointers to be made public.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243613 91177308-0d34-0410-b5e6-96231b3b80d8
Bonus change to remove emacs major mode marker from SystemZMachineFunctionInfo.cpp because emacs already knows it's C++ from the extension. Also fix typo "appeary" in AMDGPUMCAsmInfo.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243585 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
returns_twice (most importantly, setjmp) functions are
optimization-hostile: if local variable is promoted to register, and is
changed between setjmp() and longjmp() calls, this update will be
undone. This is the reason why "man setjmp" advises to mark all these
locals as "volatile".
This can not be enough for ASan, though: when it replaces static alloca
with dynamic one, optionally called if UAR mode is enabled, it adds a
whole lot of SSA values, and computations of local variable addresses,
that can involve virtual registers, and cause unexpected behavior, when
these registers are restored from buffer saved in setjmp.
To fix this, just disable dynamic alloca and UAR tricks whenever we see
a returns_twice call in the function.
Reviewers: rnk
Subscribers: llvm-commits, kcc
Differential Revision: http://reviews.llvm.org/D11495
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243561 91177308-0d34-0410-b5e6-96231b3b80d8
ASan shadow on Android starts at address 0 for both historic and
performance reasons. This is possible because the platform mandates
-pie, which makes lower memory region always available.
This is not such a good idea on 64-bit platforms because of MAP_32BIT
incompatibility.
This patch changes Android/AArch64 mapping to be the same as that of
Linux/AAarch64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243548 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
As added initially, statepoints required their call targets to be a
constant pointer null if ``numPatchBytes`` was non-zero. This turns out
to be a problem ergonomically, since there is no way to mark patchable
statepoints as calling a (readable) symbolic value.
This change remove the restriction of requiring ``null`` call targets
for patchable statepoints, and changes PlaceSafepoints to maintain the
symbolic call target through its transformation.
Reviewers: reames, swaroop.sridhar
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11550
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243502 91177308-0d34-0410-b5e6-96231b3b80d8
Before the patch, the checks were generated internally in
addRuntimeCheck. Now, we use the new overloaded version of
addRuntimeCheck that takes the ready-made set of checks as a parameter.
The checks are now generated by the client (LoopDistribution) with the
new RuntimePointerChecking::generateChecks API.
Also the new printChecks API is used to print out the checks for
debugging.
This is to continue the transition over to the new model whereby clients
will get the full set of checks from LAA, filter it and then pass it to
LoopVersioning and in turn to addRuntimeCheck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243382 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If a scale or a base register can be rewritten as "Zext({A,+,1})" then
LSR will now consider a formula of that form in its normal cost
computation.
Depends on D9180
Reviewers: qcolombet, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9181
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243348 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Was D9784: "Remove loop variant range check when induction variable is
strictly increasing"
This change re-implements D9784 with the two differences:
1. It does not use SCEVExpander and does not generate new
instructions. Instead, it does a quick local search for existing
`llvm::Value`s that it needs when modifying the `icmp`
instruction.
2. It is more general -- it deals with both increasing and decreasing
induction variables.
I've added all of the tests included with D9784, and two more.
As an example on what this change does (copied from D9784):
Given C code:
```
for (int i = M; i < N; i++) // i is known not to overflow
if (i < 0) break;
a[i] = 0;
}
```
This transformation produces:
```
for (int i = M; i < N; i++)
if (M < 0) break;
a[i] = 0;
}
```
Which can be unswitched into:
```
if (!(M < 0))
for (int i = M; i < N; i++)
a[i] = 0;
}
```
I went back and forth on whether the top level logic should live in
`SimplifyIndvar::eliminateIVComparison` or be put into its own
routine. Right now I've put it under `eliminateIVComparison` because
even though the `icmp` is not *eliminated*, it no longer is an IV
comparison. I'm open to putting it in its own helper routine if you
think that is better.
Reviewers: reames, nicholas, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11278
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243331 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we are generating sane codegen for vector sext/zext nodes on SSE targets, this patch uses instcombine to replace the SSE41/AVX2 pmovsx and pmovzx intrinsics with the equivalent native IR code.
Differential Revision: http://reviews.llvm.org/D11503
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243303 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r243167.
Duncan pointed out that dyn_cast can return null in these cases, so this
was an unsafe commit to make. Sorry for the noise.
Worryingly there were no tests which fail...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243302 91177308-0d34-0410-b5e6-96231b3b80d8
r243250 appeared to break clang/test/Analysis/dead-store.c on one of the build
slaves, but I couldn't reproduce this failure locally. Probably a false
positive as I saw this test was broken by r243246 or r243247 too but passed
later without people fixing anything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243253 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch updates TargetTransformInfoImplCRTPBase::getGEPCost to consider
addressing modes. It now returns TCC_Free when the GEP can be completely folded
to an addresing mode.
I started this patch as I refactored SLSR. Function isGEPFoldable looks common
and is indeed used by some WIP of mine. So I extracted that logic to getGEPCost.
Furthermore, I noticed getGEPCost wasn't directly tested anywhere. The best
testing bed seems CostModel, but its getInstructionCost method invokes
getAddressComputationCost for GEPs which provides very coarse estimation. So
this patch also makes getInstructionCost call the updated getGEPCost for GEPs.
This change inevitably breaks some tests because the cost model changes, but
nothing looks seriously wrong -- if we believe the new cost model is the right
way to go, these tests should be updated.
This patch is not perfect yet -- the comments in some tests need to be updated.
I want to know whether this is a right approach before fixing those details.
Reviewers: chandlerc, hfinkel
Subscribers: aschwaighofer, llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D9819
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243250 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch improves trivial loop unswitch.
The current trivial loop unswitch only checks if loop header's terminator contains a trivial unswitch condition. But if the loop header only has one reachable successor (due to intentionally or unintentionally missed code simplification), we should consider the successor as part of the loop header. Therefore, instead of stopping at loop header's terminator, we should keep traversing its successors within loop until reach a *real* conditional branch or switch (whose condition can not be constant folded). This change will enable a single -loop-unswitch pass to unswitch multiple trivial conditions (unswitch one trivial condition could open opportunity to unswitch another one in the same loop), while the old implementation can unswitch only one per pass.
Reviewers: reames, broune
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11481
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243203 91177308-0d34-0410-b5e6-96231b3b80d8
This patch extend LoopReroll pass to hand the loops which
is similar to the following:
while (len > 1) {
sum4 += buf[len];
sum4 += buf[len-1];
len -= 2;
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243171 91177308-0d34-0410-b5e6-96231b3b80d8
Since both places which set this variable do so with dyn_cast, and not
dyn_cast_or_null, its impossible to get a nullptr here, so we can remove
the check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243167 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of the pattern
for (auto I = x.rbegin(), E = x.end(); I != E; ++I)
we can use make_range to construct the reverse range and iterate using
that instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243163 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This threshold limited FunctionAttrs ability to prove arguments to be read-only.
In NVPTX, a specialized instruction ld.global.nc can be used to load memory
with non-coherent texture cache. We notice that in SHOC [1] benchmark, some
function arguments are not marked with readonly because FunctionAttrs reaches
a hardcoded threshold when analysis uses.
Removing this threshold won't cause significant regression in compilation time, because the worst-case time complexity of the algorithm is still O(# of instructions) for each parameter.
Patched by Xuetian Weng.
[1] https://github.com/vetter/shoc
Reviewers: nlewycky, jingyue, nicholas
Subscribers: nicholas, test, llvm-commits
Differential Revision: http://reviews.llvm.org/D11311
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243141 91177308-0d34-0410-b5e6-96231b3b80d8
The names for instructions inserted were previous dependent on iteration order. By deriving the names from the original instructions, we can avoid instability in tests without resorting to ordered traversals. It also makes the IR mildly easier to read at large scale.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243140 91177308-0d34-0410-b5e6-96231b3b80d8
We had a few places where we did
for (unsigned i = 0, e = STy->getNumElements(); i != e; ++i) {
but those could instead do
for (auto *EltTy : STy->elements()) {
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243136 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Resolving a branch allows us to ignore blocks that won't be executed, and thus make our estimate more accurate.
This patch is intended to be applied after D10205 (though it could be applied independently).
Reviewers: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10206
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243084 91177308-0d34-0410-b5e6-96231b3b80d8
The new code should hopefully be equivalent to the old code; it just uses a worklist to track instructions which need to visited rather than iterating over all instructions visited each time. This should be faster, but the primary benefit is that the purpose should be more clear and the diff of adding another instruction type (forthcoming) much more obvious.
Differential Revision: http://reviews.llvm.org/D11480
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243071 91177308-0d34-0410-b5e6-96231b3b80d8
Today, Select instructions also have associated PhiStates. In the near future, so will ExtractElement and SuffleVector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243056 91177308-0d34-0410-b5e6-96231b3b80d8
Deleting much of the code using trace-rewrite-statepoints and use idiomatic DEBUG statements instead. This includes adding operator<< to a helper class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243054 91177308-0d34-0410-b5e6-96231b3b80d8
We don't need to pass in the map from BDV to PhiStates; we can instead handle that externally and let the MeetPhiStates helper class just meet PhiStates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243045 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Scalarizer has two data structures that hold information about changes
to the function, Gathered and Scattered. These are cleared in finish()
at the end of runOnFunction() if finish() detects any changes to the
function.
However, finish() was checking for changes by only checking if
Gathered was non-empty. The function visitStore() only modifies
Scattered without touching Gathered. As a result, Scattered could have
ended up having stale data if Scalarizer only scalarized store
instructions. Since the data in Scattered is used during the execution
of the pass, this introduced dangling pointer errors.
The fix is to check whether both Scattered and Gathered are empty
before deciding what to do in finish(). This also fixes a problem
where the Function can be modified although the pass returns false.
Reviewers: rnk
Subscribers: rnk, srhines, llvm-commits
Differential Revision: http://reviews.llvm.org/D10459
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243040 91177308-0d34-0410-b5e6-96231b3b80d8
We currently version `__asan_init` and when the ABI version doesn't match, the linker gives a `undefined reference to '__asan_init_v5'` message. From this, it might not be obvious that it's actually a version mismatch error. This patch makes the error message much clearer by changing the name of the undefined symbol to be `__asan_version_mismatch_check_xxx` (followed by the version string). We obviously don't want the initializer to be named like that, so it's a separate symbol that is used only for the purpose of version checking.
Reviewed at http://reviews.llvm.org/D11004
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243003 91177308-0d34-0410-b5e6-96231b3b80d8
the general GMR-in-non-LTO flag.
Without this, we have the global information during the CGSCC pipeline
for GVN and such, but don't have it available during the late loop
optimizations such as the vectorizer. Moreover, after the CGSCC pipeline
has finished we have substantially more accurate and refined call graph
information, function annotations, etc, which will make GMR even more
powerful than it is early in the pipelien.
Note that we have to play silly games with preserving AliasAnalysis
(which is now trivially preserved) in order to let a module analysis
magically be preserved into the entire function pass pipeline.
Simultaneously we have to not make GMR an immutable pass in order to be
able to re-run it and collect fresh data on the final call graph.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242999 91177308-0d34-0410-b5e6-96231b3b80d8
preparation for de-coupling the AA implementations.
In order to do this, they had to become fake-scoped using the
traditional LLVM pattern of a leading initialism. These can't be actual
scoped enumerations because they're bitfields and thus inherently we use
them as integers.
I've also renamed the behavior enums that are specific to reasoning
about the mod/ref behavior of functions when called. This makes it more
clear that they have a very narrow domain of applicability.
I think there is a significantly cleaner API for all of this, but
I don't want to try to do really substantive changes for now, I just
want to refactor the things away from analysis groups so I'm preserving
the exact original design and just cleaning up the names, style, and
lifting out of the class.
Differential Revision: http://reviews.llvm.org/D10564
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242963 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
While working on a project I wound up generating a fairly large lookup table (10k entries) of callbacks inside of a static constructor. Clang was taking upwards of ~10 minutes to compile the lookup table. I generated a smaller test case (http://www.inolen.com/static_initializer_test.ll) that, after running with -ftime-report, pointed fingers at GlobalOpt and MemCpyOptimizer.
Running globalopt took around ~9 minutes. The slowdown came from how GlobalOpt merged stores from static constructors individually into the global initializer in EvaluateStaticConstructor. For each store it discovered and wanted to commit, it would copy the existing global initializer and then merge in the individual store. I changed this so that stores are now grouped by global, and sorted from most significant to least significant by their GEP indexes (e.g. a store to GEP 0, 0 comes before GEP 0, 0, 1). With this representation, the existing initializer can be copied and all new stores merged into it in a single pass.
With this patch and http://reviews.llvm.org/D11198, the lookup table that was taking ~10 minutes to compile now compiles in around 5 seconds. I've ran 'make check' and the test-suite, which all passed.
I'm not really sure who to tag as a reviewer, Lang mentioned that Chandler may be appropriate.
Reviewers: chandlerc, nlewycky
Subscribers: nlewycky, llvm-commits
Differential Revision: http://reviews.llvm.org/D11200
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242935 91177308-0d34-0410-b5e6-96231b3b80d8
