11 Commits

Author SHA1 Message Date
David Blaikie
0fcb9cb1c1 DebugInfo: Following up to r209677, refactor local variable emission to delay the choice between emitting the definition attributes or using DW_AT_abstract_definition
This doesn't fix the abstract variable handling yet, but it introduces a
similar delay mechanism as was added for subprograms, causing
DW_AT_location to be reordered to the beginning of the attribute list
for local variables, and fixes all the test fallout for that.

A subsequent commit will remove the abstract variable handling in
DbgVariable and just do the abstract variable lookup at module end to
ensure that abstract variables introduced after their concrete
counterparts are appropriately referenced by the concrete variable.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210943 91177308-0d34-0410-b5e6-96231b3b80d8
2014-06-13 22:18:23 +00:00
Adrian Prantl
988b78a846 This reapplies r207235 with an additional bugfixes caught by the msan
buildbot - do not insert debug intrinsics before phi nodes.

Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.

Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.

This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source

rdar://problem/16679879
http://reviews.llvm.org/D3374

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207269 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-25 20:49:25 +00:00
Adrian Prantl
25c74de500 Revert "This reapplies r207130 with an additional testcase+and a missing check for"
This reverts commit 207235 to investigate msan buildbot breakage.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207250 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-25 18:18:09 +00:00
Adrian Prantl
7e96d88347 This reapplies r207130 with an additional testcase+and a missing check for
AllocaInst that was missing in one location.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.

Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.

This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source

rdar://problem/16679879
http://reviews.llvm.org/D3374

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207235 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-25 17:01:00 +00:00
Adrian Prantl
680311d2d2 Revert "This reapplies r207130 with an additional testcase+and a missing check for"
Typo in testcase.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207166 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-25 00:42:50 +00:00
Adrian Prantl
50e7ba14ca This reapplies r207130 with an additional testcase+and a missing check for
AllocaInst that was missing in one location.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.

Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.

This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source

rdar://problem/16679879
http://reviews.llvm.org/D3374

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207165 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-25 00:38:40 +00:00
Adrian Prantl
ab6ab3c333 Revert "Debug info for optimized code: Support variables that are on the stack and"
This reverts commit 207130 for buildbot breakage.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207162 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-25 00:04:49 +00:00
Adrian Prantl
f28f471f16 Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.

Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.

This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine-intrinsics testcase and included source


rdar://problem/16679879
http://reviews.llvm.org/D3374

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207130 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-24 17:41:45 +00:00
Adrian Prantl
c6db0bdef2 Debug info: Store the DIVariable in DebugLocEntry also for constants,
so DwarfDebug::emitDebugLocEntry can emit them with the correct signedness.

rdar://problem/15928306

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206042 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-11 17:49:47 +00:00
Alp Toker
46d36be2eb Fix some doc and comment typos
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205899 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-09 14:47:27 +00:00
Adrian Prantl
ccd539282b DwarfDebug: Prevent DebugLocEntry merging from coalescing two different
constants into only the first one.

rdar://14874886.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205357 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-01 21:04:18 +00:00