BB#1: derived from LLVM BB %bb.nph28
Live Ins: %AL
Predecessors according to CFG: BB#0
TEST8rr %reg16384<kill>, %reg16384, %EFLAGS<imp-def>; GR8:%reg16384
JNE_4 <BB#2>, %EFLAGS<imp-use,kill>
JMP_4 <BB#2>
Successors according to CFG: BB#2 BB#2
These double CFG edges only ever occur in bugpoint-generated code, so there is
no need to attempt something clever.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117992 91177308-0d34-0410-b5e6-96231b3b80d8
It is legal for an instruction to have two operands using the same register,
only one a kill. This is interpreted as a kill.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117981 91177308-0d34-0410-b5e6-96231b3b80d8
source, and let rewrite() clean it up.
This way, kill flags on the inserted copies are fixed as well during rewrite().
We can't just assume that all the copies we insert are going to be kills since
critical edges into loop headers sometimes require both source and dest to be
live out of a block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117980 91177308-0d34-0410-b5e6-96231b3b80d8
At least X86FloatingPoint requires correct kill flags after register allocation,
and targets using register scavenging benefit. Conservative kill flags are not
enough.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117960 91177308-0d34-0410-b5e6-96231b3b80d8
When an instruction refers to a spill slot with a LiveStacks entry, check that
the spill slot is live at the instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117944 91177308-0d34-0410-b5e6-96231b3b80d8
We don't want unused values forming their own equivalence classes, so we lump
them all together in one class, and then merge them with the class of the last
used value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117670 91177308-0d34-0410-b5e6-96231b3b80d8
in SSAUpdaterImpl.h
Verifying live intervals revealed that the old method was completely wrong, and
we need an iterative approach to calculating PHI placemant. Fortunately, we have
MachineDominators available, so we don't have to compute that over and over
like SSAUpdaterImpl.h must.
Live-out values are cached between calls to mapValue() and computed in a greedy
way, so most calls will be working with very small block sets.
Thanks to Bob for explaining how this should work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117599 91177308-0d34-0410-b5e6-96231b3b80d8
proper SSA updating.
This doesn't cause MachineDominators to be recomputed since we are already
requiring MachineLoopInfo which uses dominators as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117598 91177308-0d34-0410-b5e6-96231b3b80d8
Critical edges going into a loop are not as bad as critical exits. We can handle
them by splitting the critical edge, or by having both inside and outside
registers live out of the predecessor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117423 91177308-0d34-0410-b5e6-96231b3b80d8
the remainder register.
Example:
bb0:
x = 1
bb1:
use(x)
...
x = 2
jump bb1
When x is isolated in bb1, the inner part breaks into two components, x1 and x2:
bb0:
x0 = 1
bb1:
x1 = x0
use(x1)
...
x2 = 2
x0 = x2
jump bb1
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117408 91177308-0d34-0410-b5e6-96231b3b80d8
When a block has exactly two uses and the register is both live-in and live-out,
don't isolate the block. We would be inserting two copies, so we haven't really
made any progress.
If the live-in and live-out values separate into disconnected components after
splitting, we would be making progress. We can't detect that for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117169 91177308-0d34-0410-b5e6-96231b3b80d8
An exit block with a critical edge must only have predecessors in the loop, or
just before the loop. This guarantees that the inserted copies in the loop
predecessors dominate the exit block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117144 91177308-0d34-0410-b5e6-96231b3b80d8
operand, also check if subregisters are killed.
Add <imp-def> operands for subregisters that remain alive after a super register
is killed.
I don't have a testcase for this that reproduces on trunk. <rdar://problem/8441758>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116940 91177308-0d34-0410-b5e6-96231b3b80d8
Pull an unsigned out of the Contents union such that it has the same size as two
pointers and no padding.
Arrange members such that the Contents union and all pointers can be 8-byte
aligned without padding.
This speeds up code generation by 0.8% on a 64-bit host. 32-bit hosts should be
unaffected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116857 91177308-0d34-0410-b5e6-96231b3b80d8
A CHECK-NOT pattern without a following CHECK pattern simply checks that the
pattern doesn't match before the end of the input file.
You can even have only CHECK-NOT patterns to check that strings appear nowhere
in the input file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116592 91177308-0d34-0410-b5e6-96231b3b80d8
All registers created during splitting or spilling are assigned to the same
stack slot as the parent register.
When splitting or rematting, we may not spill at all. In that case the stack
slot is still assigned, but it will be dead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116546 91177308-0d34-0410-b5e6-96231b3b80d8
splitting or spillling, and to help with rematerialization.
Use LiveRangeEdit in InlineSpiller and SplitKit. This will eventually make it
possible to share remat code between InlineSpiller and SplitKit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116543 91177308-0d34-0410-b5e6-96231b3b80d8
Before we would also split around a loop if any peripheral block had multiple
uses. This could cause repeated splitting when splitting a different live range
would insert uses into the periphery.
Now -spiller=inline passes the nightly test suite again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116494 91177308-0d34-0410-b5e6-96231b3b80d8
The reg-reg copies were no longer being generated since copyPhysReg copies
physical registers only.
The loads and stores are not necessary - The TC constraint is imposed by the
TAILJMP and TCRETURN instructions, there should be no need for constrained loads
and stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116314 91177308-0d34-0410-b5e6-96231b3b80d8
virtual registers for those stores since RegAllocFast requires that each live
physreg only be used once.
This fixes PR8357.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116222 91177308-0d34-0410-b5e6-96231b3b80d8
LocalRewriter.
This is a bit of a hack that adds an implicit use operand to model the
read-modify-write nature of a partial redef. Uses and defs are rewritten in
separate passes, and a single operand would never be processed twice.
<rdar://problem/8518892>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116210 91177308-0d34-0410-b5e6-96231b3b80d8
functions: computeRemainder and rewrite.
When the remainder breaks up into multiple components, remember to rewrite those
uses as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116121 91177308-0d34-0410-b5e6-96231b3b80d8
connected components. These components should be allocated different virtual
registers because there is no reason for them to be allocated together.
Add the ConnectedVNInfoEqClasses class to calculate the connected components,
and move values to new LiveIntervals.
Use it from SplitKit::rewrite by creating new virtual registers for the
components.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116006 91177308-0d34-0410-b5e6-96231b3b80d8
This function is intended to be used when inserting a machine instruction that
trivially restricts the legal registers, like LEA requiring a GR32_NOSP
argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115875 91177308-0d34-0410-b5e6-96231b3b80d8
never kept after splitting.
Keeping the original interval made sense when the split region doesn't modify
the register, and the original is spilled. We can get the same effect by
detecting reloaded values when spilling around copies.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115695 91177308-0d34-0410-b5e6-96231b3b80d8
Insert copy after defining instruction.
Fix LiveIntervalMap::extendTo to properly handle live segments starting before
the current basic block.
Make sure the open live range is extended to the inserted copy's use slot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115665 91177308-0d34-0410-b5e6-96231b3b80d8
LiveInterval::MergeValueNumberInto instead of trying to extend LiveRanges and
getting it wrong.
This fixed PR8249 where a valno with a multi-segment live range was defined by
an identity copy created by RemoveCopyByCommutingDef. Some of the live
segments disappeared.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115385 91177308-0d34-0410-b5e6-96231b3b80d8
edited during emission.
If the basic block ends in a switch that gets lowered to a jump table, any
phis at the default edge were getting updated wrong. The jump table data
structure keeps a pointer to the header blocks that wasn't getting updated
after the MBB is split.
This bug was exposed on 32-bit Linux when disabling critical edge splitting in
codegen prepare.
The fix is to uipdate stale MBB pointers whenever a block is split during
emission.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115191 91177308-0d34-0410-b5e6-96231b3b80d8
Usually we wouldn't do this anyway because llvm_fenv_testexcept would return an
exception, but we have seen some cases where neither errno nor fenv detect an
exception on arm-linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114893 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts revision 114633. It was breaking llvm-gcc-i386-linux-selfhost.
It seems there is a downstream bug that is exposed by
-cgp-critical-edge-splitting=0. When that bug is fixed, this patch can go back
in.
Note that the changes to tailcallfp2.ll are not reverted. They were good are
required.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114859 91177308-0d34-0410-b5e6-96231b3b80d8
creating it before and subtracting split ranges.
This way, the SSA update code in LiveIntervalMap can properly create and use new
phi values in dupli. Now it is possible to create split regions where a value
escapes along two different CFG edges, creating phi values outside the split
region.
This is a work in progress and probably quite broken.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114492 91177308-0d34-0410-b5e6-96231b3b80d8
