the 'zero' bit down into the back-end. There are other cases where this logic
isn't sufficient, so they should be handled separately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113665 91177308-0d34-0410-b5e6-96231b3b80d8
iterator when an optimization took place. This allows us to do more insane
things with the code than just remove an instruction or two.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113640 91177308-0d34-0410-b5e6-96231b3b80d8
2-phase build of llvm and llvm-gcc, similar to what the buildbots do, and runs
the regression testsuite.
Things to do:
- Work out some bugs with llvm-gcc flags.
- Not all platforms support ObjC.
- Run the test-suite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113382 91177308-0d34-0410-b5e6-96231b3b80d8
- Add patterns to match the following MMX builtins:
* __builtin_ia32_vec_init_v8qi
* __builtin_ia32_vec_init_v4hi
* __builtin_ia32_vec_init_v2si
* __builtin_ia32_vec_ext_v2si
These builtins do not correspond to a single MMX instruction. They will have
to be lowered -- most likely in the back-end.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112881 91177308-0d34-0410-b5e6-96231b3b80d8
int x(int t) {
if (t & 256)
return -26;
return 0;
}
We generate this:
tst.w r0, #256
mvn r0, #25
it eq
moveq r0, #0
while gcc generates this:
ands r0, r0, #256
it ne
mvnne r0, #25
bx lr
Scandalous really!
During ISel time, we can look for this particular pattern. One where we have a
"MOVCC" that uses the flag off of a CMPZ that itself is comparing an AND
instruction to 0. Something like this (greatly simplified):
%r0 = ISD::AND ...
ARMISD::CMPZ %r0, 0 @ sets [CPSR]
%r0 = ARMISD::MOVCC 0, -26 @ reads [CPSR]
All we have to do is convert the "ISD::AND" into an "ARM::ANDS" that sets [CPSR]
when it's zero. The zero value will all ready be in the %r0 register and we only
need to change it if the AND wasn't zero. Easy!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112664 91177308-0d34-0410-b5e6-96231b3b80d8
optional modified register (instead of reg0). Along with r112461 it will make
sure that the optional define of CPSR is marked as "def" and will thus mark the
instructions using these classes (t2ANDS*) as setting the 's' flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112462 91177308-0d34-0410-b5e6-96231b3b80d8
comparison with 0. These two pieces of code should give identical results:
rsbs r1, r1, 0
cmp r0, r1
mov r0, #0
it ls
mov r0, #1
and:
cmn r0, r1
mov r0, #0
it ls
mov r0, #1
However, the CMN gives the *opposite* result when r1 is 0. This is because the
carry flag is set in the CMP case but not in the CMN case. In short, the CMP
instruction doesn't perform a truncate of the (logical) NOT of 0 plus the value
of r0 and the carry bit (because the "carry bit" parameter to AddWithCarry is
defined as 1 in this case, the carry flag will always be set when r0 >= 0). The
CMN instruction doesn't perform a NOT of 0 so there is never a "carry" when this
AddWithCarry is performed (because the "carry bit" parameter to AddWithCarry is
defined as 0).
The AddWithCarry in the CMP case seems to be relying upon the identity:
~x + 1 = -x
However when x is 0 and unsigned, this doesn't hold:
x = 0
~x = 0xFFFF FFFF
~x + 1 = 0x1 0000 0000
(-x = 0) != (0x1 0000 0000 = ~x + 1)
Therefore, we should disable *all* versions of CMN, especially when comparing
against zero, until we can limit when the CMN instruction is used (when we know
that the RHS is not 0) or when we have a hardware fix for this.
(See the ARM docs for the "AddWithCarry" pseudo-code.)
This is related to <rdar://problem/7569620>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112176 91177308-0d34-0410-b5e6-96231b3b80d8
It's similar to "linker_private_weak", but it's known that the address of the
object is not taken. For instance, functions that had an inline definition, but
the compiler decided not to inline it. Note, unlike linker_private and
linker_private_weak, linker_private_weak_def_auto may have only default
visibility. The symbols are removed by the linker from the final linked image
(executable or dynamic library).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111684 91177308-0d34-0410-b5e6-96231b3b80d8
float t1(int argc) {
return (argc == 1123) ? 1.234f : 2.38213f;
}
We would generate truly awful code on ARM (those with a weak stomach should look
away):
_t1:
movw r1, #1123
movs r2, #1
movs r3, #0
cmp r0, r1
mov.w r0, #0
it eq
moveq r0, r2
movs r1, #4
cmp r0, #0
it ne
movne r3, r1
adr r0, #LCPI1_0
ldr r0, [r0, r3]
bx lr
The problem was that legalization was creating a cascade of SELECT_CC nodes, for
for the comparison of "argc == 1123" which was fed into a SELECT node for the ?:
statement which was itself converted to a SELECT_CC node. This is because the
ARM back-end doesn't have custom lowering for SELECT nodes, so it used the
default "Expand".
I added a fairly simple "LowerSELECT" to the ARM back-end. It takes care of this
testcase, but can obviously be expanded to include more cases.
Now we generate this, which looks optimal to me:
_t1:
movw r1, #1123
movs r2, #0
cmp r0, r1
adr r0, #LCPI0_0
it eq
moveq r2, #4
ldr r0, [r0, r2]
bx lr
.align 2
LCPI0_0:
.long 1075344593 @ float 2.382130e+00
.long 1067316150 @ float 1.234000e+00
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110799 91177308-0d34-0410-b5e6-96231b3b80d8
pass. This pass should expand with all of the small, fine-grained optimization
passes to reduce compile time and increase happiment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110627 91177308-0d34-0410-b5e6-96231b3b80d8
relatively expensive comparison analyzer on each instruction. Also rename the
comparison analyzer method to something more in line with what it actually does.
This pass is will eventually be folded into the Machine CSE pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110539 91177308-0d34-0410-b5e6-96231b3b80d8
need the Compare flag after all.
--- Reverse-merging r109901 into '.':
U include/llvm/Target/TargetInstrDesc.h
U include/llvm/Target/Target.td
U utils/TableGen/InstrInfoEmitter.cpp
U utils/TableGen/CodeGenInstruction.cpp
U utils/TableGen/CodeGenInstruction.h
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110424 91177308-0d34-0410-b5e6-96231b3b80d8
This pass tries to remove comparison instructions when possible. For instance,
if you have this code:
sub r1, 1
cmp r1, 0
bz L1
and "sub" either sets the same flag as the "cmp" instruction or could be
converted to set the same flag, then we can eliminate the "cmp" instruction all
together. This is a important for ARM where the ALU instructions could set the
CPSR flag, but need a special suffix ('s') to do so.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@110423 91177308-0d34-0410-b5e6-96231b3b80d8
later to identify and possibly remove superfluous compare instructions -- those
that are testing for and setting a status flag that should already be set.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109901 91177308-0d34-0410-b5e6-96231b3b80d8
protectors, to be near the stack protectors on the stack. Accomplish this by
tagging the stack object with a predicate that indicates that it would trigger
this. In the prolog-epilog inserter, assign these objects to the stack after the
stack protector but before the other objects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109481 91177308-0d34-0410-b5e6-96231b3b80d8
void foo() { __builtin_unreachable(); }
It will output the following on Darwin X86:
_func1:
Leh_func_begin0:
pushq %rbp
Ltmp0:
movq %rsp, %rbp
Ltmp1:
Leh_func_end0:
This prolog adds a new Call Frame Information (CFI) row to the FDE with an
address that is not within the address range of the code it describes -- part is
equal to the end of the function -- and therefore results in an invalid EH
frame. If we emit a nop in this situation, then the CFI row is now within the
address range.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108568 91177308-0d34-0410-b5e6-96231b3b80d8
the function. We'll just turn it into a "trap" instruction instead.
The problem with not handling this is that it might generate a prologue without
the equivalent epilogue to go with it:
$ cat t.ll
define void @foo() {
entry:
unreachable
}
$ llc -o - t.ll -relocation-model=pic -disable-fp-elim -unwind-tables
.section __TEXT,__text,regular,pure_instructions
.globl _foo
.align 4, 0x90
_foo: ## @foo
Leh_func_begin0:
## BB#0: ## %entry
pushq %rbp
Ltmp0:
movq %rsp, %rbp
Ltmp1:
Leh_func_end0:
...
The unwind tables then have bad data in them causing all sorts of problems.
Fixes <rdar://problem/8096481>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108473 91177308-0d34-0410-b5e6-96231b3b80d8
Objective-C metadata types which should be marked as "weak", but which the
linker will remove upon final linkage. However, this linkage isn't specific to
Objective-C.
For example, the "objc_msgSend_fixup_alloc" symbol is defined like this:
.globl l_objc_msgSend_fixup_alloc
.weak_definition l_objc_msgSend_fixup_alloc
.section __DATA, __objc_msgrefs, coalesced
.align 3
l_objc_msgSend_fixup_alloc:
.quad _objc_msgSend_fixup
.quad L_OBJC_METH_VAR_NAME_1
This is different from the "linker_private" linkage type, because it can't have
the metadata defined with ".weak_definition".
Currently only supported on Darwin platforms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107433 91177308-0d34-0410-b5e6-96231b3b80d8
Bill Wendling