an MCExpr, in order to avoid writing an encoded zero value in the immediate
field.
When getUnconditionalBranchTargetOpValue is called with an MCExpr target, we
don't know what the final immediate field value should be. We shouldn't
explicitly set the immediate field to an encoded zero value as zero is encoded
with a non-zero bit pattern. This leads to bits being set that pollute the
final immediate value. The nature of the encoding is such that the polluted
bits only affect very large immediate values, explaining why this hasn't
caused problems earlier.
Fixes <rdar://problem/15155975>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193535 91177308-0d34-0410-b5e6-96231b3b80d8
According to the ARM specification, "mov" is a valid mnemonic for all Thumb2 MOV encodings.
To achieve this, the patch adds one instruction alias with a special range condition to avoid collision with the Thumb1 MOV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188901 91177308-0d34-0410-b5e6-96231b3b80d8
The Thumb2 add immediate is in fact defined for SP. The manual is misleading as it points to a different section for add immediate with SP, however the encoding is the same as for add immediate with register only with the SP operand hard coded. As such add immediate with SP and add immediate with register can safely be treated as the same instruction.
All the patch does is adjust a register constraint on an instruction alias.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188676 91177308-0d34-0410-b5e6-96231b3b80d8
Thumb2 literal loads use an offset encoding which allows for
negative zero. This fixes parsing and encoding so that #-0
is correctly processed. The parser represents #-0 as INT32_MIN.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188549 91177308-0d34-0410-b5e6-96231b3b80d8
There are many Thumb instructions which take 12-bit immediates encoded in a special
8-byte value + 4-byte rotator form. Not all numbers are represented, and it's legal
to transform an assembly instruction to be able to encode the immediate.
For example: AND and BIC are complementary instructions; one can switch the AND
to a BIC as long as the immediate is complemented.
The intent is to switch one instruction into its complementary one when the immediate
cannot be encoded in the form requested in the original assembly and when the
complementary immediate is encodable.
The patch addresses two issues:
1. definition of t2SOImmNot immediate - it has to check that the orignal value is
not encoded naturally
2. t2AND and t2BIC instruction aliases which should use the Thumb2 SOImm operand
rather than the ARM one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188548 91177308-0d34-0410-b5e6-96231b3b80d8
1. The offset range for Thumb1 PC relative loads is [0..1020] and not [-1024..1020]
2. Thumb2 PC relative loads may define the PC, so the restriction placed on target register is removed
3. Removes unneeded alias between "ldr.n" and t1LDRpci. ".n" is actually stripped by both tablegen
and the ASM parser, so this alias rule really does nothing
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188466 91177308-0d34-0410-b5e6-96231b3b80d8
In Thumb1, only one variant is supported: CPS{effect} {flags}
Thumb2 supports three:
CPS{effect}.W {flags}
CPS{effect} {flags} {mode}
CPS {mode}
Canonically, .W should be used only when ambiguity is present between encodings of different width.
The wide suffix is still accepted for the latter two forms via aliases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188071 91177308-0d34-0410-b5e6-96231b3b80d8
The long encoding for Thumb2 unconditional branches is broken.
Additionally, there is no range checking for target operands; as such
for instructions originating in assembly code, only short Thumb encodings
are generated, regardless of the bitsize needed for the offset.
Adding range checking is non trivial due to the representation of Thumb
branch instructions. There is no true difference between conditional and
unconditional branches in terms of operands and syntax - even unconditional
branches have a predicate which is expected to match that of the IT block
they are in. Yet, the encodings and the permitted size of the offset differ.
Due to this, for any mnemonic there are really 4 encodings to choose for.
The problem cannot be handled in the parser alone or by manipulating td files.
Because the parser builds first a set of match candidates and then checks them
one by one, whatever tablegen-only solution might be found will ultimately be
dependent of the parser's evaluation order. What's worse is that due to the fact
that all branches have the same syntax and the same kinds of operands, that
order is governed by the lexicographical ordering of the names of operand
classes...
To circumvent all this, any necessary disambiguation is added to the instruction
validation pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188067 91177308-0d34-0410-b5e6-96231b3b80d8
While the .td entry is nice and all, it takes a pretty gross hack in
ARMAsmParser::ParseInstruction() because of handling of other "subs"
instructions to get it to match. Ran it by Jim Grosbach and he said it was
about what he expected to make this work given the existing code.
rdar://14214063
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187530 91177308-0d34-0410-b5e6-96231b3b80d8
instructions. With this patch:
1. ldr.n is recognized as mnemonic for the short encoding
2. ldr.w is recognized as menmonic for the long encoding
3. ldr will map to either short or long encodings depending on the size of the offset
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186831 91177308-0d34-0410-b5e6-96231b3b80d8
This adds an instruction alias to make the assembler recognize the alternate literal form: pli [PC, #+/-<imm>]
See A8.8.129 in the ARM ARM (DDI 0406C.b).
Fixes <rdar://problem/14403733>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186459 91177308-0d34-0410-b5e6-96231b3b80d8
Before the fix Thumb2 instructions of type "add rD, rN, #imm" (T3 encoding, see ARM ARM A8.8.4) with rD and rN both being low registers (r0-r7) were classified as having the T4 encoding.
The T4 encoding doesn't have a cc_out operand so for above instructions the operand gets erroneously removed, corrupting the token stream and leading to parse errors later in the process.
This bug prevented "add r1, r7, #0xcbcbcbcb" from being assembled correctly.
Fixes <rdar://problem/14224440>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185575 91177308-0d34-0410-b5e6-96231b3b80d8
1. it should accept only 4-byte aligned addresses
2. the maximum offset should be 1020
3. it should be encoded with the offset scaled by two bits
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185528 91177308-0d34-0410-b5e6-96231b3b80d8
The mapping between SRS pseudo-instructions and SRS native instructions was incorrect, the correct mapping is:
srsfa -> srsib
srsea -> srsia
srsfd -> srsdb
srsed -> srsda
This fixes <rdar://problem/14214734>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185155 91177308-0d34-0410-b5e6-96231b3b80d8
When using a positive offset, literal loads where encoded
as if it was negative, because:
- The sign bit was not assigned to an operand
- The addrmode_imm12 operand was not encoding the sign bit correctly
This patch also makes the assembler look at the .w/.n specifier for
loads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184182 91177308-0d34-0410-b5e6-96231b3b80d8
"hint" space for Thumb actually overlaps the encoding space of the CPS
instruction. In actuality, hints can be defined as CPS instructions where imod
and M bits are all nil.
Handle decoding of permitted nop-compatible hints (i.e. nop, yield, wfi, wfe,
sev) in DecodeT2CPSInstruction.
This commit adds a proper diagnostic message for Imm0_4 and updates all tests.
Patch by Mihail Popa <Mihail.Popa@arm.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180617 91177308-0d34-0410-b5e6-96231b3b80d8
immediate generates the narrow version. Needed when doing round-trip
assemble/disassemble testing using the alternate syntax that specifies
'pc' directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170255 91177308-0d34-0410-b5e6-96231b3b80d8
The NOP, WFE, WFI, SEV and YIELD instructions are all hints w/
a different immediate value in bits [7,0]. Define a generic HINT
instruction and refactor NOP, WFI, WFI, SEV and YIELD to be
assembly aliases of that.
rdar://11600518
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158674 91177308-0d34-0410-b5e6-96231b3b80d8
Make sure when parsing the Thumb1 sp+register ADD instruction that
the source and destination operands match. In thumb2, just use the
wide encoding if they don't. In Thumb1, issue a diagnostic.
rdar://11219154
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155748 91177308-0d34-0410-b5e6-96231b3b80d8
We were incorrectly conflating some add variants which don't have a
cc_out operand with the mirroring sub encodings, which do. Part of the
awesome non-orthogonality legacy of thumb1. Similarly, handling of
add/sub of an immediate was sometimes incorrectly removing the cc_out
operand for add/sub register variants.
rdar://11216577
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154411 91177308-0d34-0410-b5e6-96231b3b80d8
When an immediate is both a value [t2_]so_imm and a [t2_]so_imm_neg,
we want to use the non-negated form to make sure we prefer the normal
encoding, not the aliased encoding via the negation of, e.g., 'cmp.w'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153770 91177308-0d34-0410-b5e6-96231b3b80d8
For 'adds r2, r2, #56' outside of an IT block, the 16-bit encoding T2
can be used for this syntax. Prefer the narrow encoding when possible.
rdar://11156277
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153759 91177308-0d34-0410-b5e6-96231b3b80d8
When 'cmp rn #imm' doesn't match due to the immediate not being representable,
but 'cmn rn, #-imm' does match, use the latter in place of the former, as
it's equivalent.
rdar://10552389
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146567 91177308-0d34-0410-b5e6-96231b3b80d8
