The code is buggy and barely tested. It is also mostly boilerplate.
(This includes MCObjectDisassembler, which is the interface to that
functionality)
Following an IRC discussion with Jim Grosbach, it seems sensible to just
nuke the whole lot of functionality, and dig it up from VCS if
necessary (I hope not!).
All of this stuff appears to have been added in a huge patch dump (look
at the timeframe surrounding e.g. r182628) where almost every patch
seemed to be untested and not reviewed before being committed.
Post-review responses to the patches were never addressed. I don't think
any of it would have passed pre-commit review.
I doubt anyone is depending on this, since this code appears to be
extremely buggy. In limited testing that Michael Spencer and I did, we
couldn't find a single real-world object file that wouldn't crash the
CFG reconstruction stuff. The symbolizer stuff has O(n^2) behavior and
so is not much use to anyone anyway. It seemed simpler to remove them as
a whole. Most of this code is boilerplate, which is the only way it was
able to scrape by 60% coverage.
HEADSUP: Modules folks, some files I nuked were referenced from
include/llvm/module.modulemap; I just deleted the references. Hopefully
that is the right fix (one was a FIXME though!).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216983 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch we had
@a = weak global ...
but
@b = alias weak ...
The patch changes aliases to look more like global variables.
Looking at some really old code suggests that the reason was that the old
bison based parser had a reduction for alias linkages and another one for
global variable linkages. Putting the alias first avoided the reduce/reduce
conflict.
The days of the old .ll parser are long gone. The new one parses just "linkage"
and a later check is responsible for deciding if a linkage is valid in a
given context.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214355 91177308-0d34-0410-b5e6-96231b3b80d8
The -print-file-name option in llvm-nm is to precede each symbol
with the object file it came from. While code for the parsing of this
option and its aliases existed there was no code to implement it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213906 91177308-0d34-0410-b5e6-96231b3b80d8
the specified section. This is same functionality as darwin’s nm(1) "-s" flag.
There is one FIXME in the code and I’m all ears to anyone that can help me
with that. This option takes exactly two strings and should be allowed
anywhere on the command line. Such that "llvm-nm -s __TEXT __text foo.o"
would work. But that does not as the CommandLine Library does not have a
way to make this work as far as I can tell. For now the "-s __TEXT __text"
has to be last on the command line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212842 91177308-0d34-0410-b5e6-96231b3b80d8
This will allow the "-s" flag to implemented in the future as it
is in darwin’s nm(1) to list symbols only in the specified section.
Given a LGTM by Shankar Easwaran who originally implemented
the support for lvm-nm’s -print-armap and archive map symbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212576 91177308-0d34-0410-b5e6-96231b3b80d8
It is not clear if llvm.global_ctors should or should not be in llvm.metadata,
but in practice it is not and we need to ignore it for LTO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212351 91177308-0d34-0410-b5e6-96231b3b80d8
symbol’s name. On darwin the -j flag is used (often in combinations
with other flags) to produce a complete list of symbol names which
than can then be reorder and used with ld(1)’s -order_file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212294 91177308-0d34-0410-b5e6-96231b3b80d8
This should allow llvm-ar to be used instead of gnu ar + plugin in a LTO
build. I will add a release note about it once I finish a LTO bootstrap with it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212287 91177308-0d34-0410-b5e6-96231b3b80d8
to select the slice out of a Mach-O universal file. This also includes
support for -arch all, selecting the host architecture by default from
a universal file and checking if -arch is used with a standard Mach-O
it matches that architecture.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212108 91177308-0d34-0410-b5e6-96231b3b80d8
universal file. This also includes support for -arch all, selecting the host
architecture by default from a universal file and checking if -arch is used
with a standard Mach-O it matches that architecture.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212054 91177308-0d34-0410-b5e6-96231b3b80d8
to match llvm-size and other UNIX systems for their nm(1).
Tweak test cases that used llvm-nm with standard input to add a "-" to
indicate that and add a test case to check the default of a.out for llvm-nm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211529 91177308-0d34-0410-b5e6-96231b3b80d8
the tool is given multiple files. Also fix the same issue with Mach-O
universal files. And fix the newline spacing to separate the output
in these cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211405 91177308-0d34-0410-b5e6-96231b3b80d8
fat files) to print “ (for architecture XYZ)” for fat files with more than
one architecture to be like what the darwin tools do for fat files.
Also clean up the Mach-O printing of archive membernames in llvm-nm to use
the darwin form of "libx.a(foo.o)".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211316 91177308-0d34-0410-b5e6-96231b3b80d8
fat files containing archives.
Also fix a bug in MachOUniversalBinary::ObjectForArch::ObjectForArch()
where it needed a >= when comparing the Index with the number of
objects in a fat file. As the index starts at 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211230 91177308-0d34-0410-b5e6-96231b3b80d8
and the -l option for the long format. Also when the object is a Mach-O
file and the format is berkeley produce output like darwin’s default size(1)
summary berkeley derived output.
Like System V format, there are also some small changes in how and where
the file names and archive member names are printed for darwin and
Mach-O.
Like the changes to llvm-nm these are the first steps in seeing if it is
possible to make llvm-size produce the same output as darwin's size(1).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211117 91177308-0d34-0410-b5e6-96231b3b80d8
This makes llvm-nm ignore members that are not sufficiently aligned for
lib/Object to handle.
These archives are invalid. GNU AR is able to handle this, but in general
just warns about broken archive members.
We should probably start warning too, but for now just make sure llvm-nm
exits with an 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211036 91177308-0d34-0410-b5e6-96231b3b80d8
The idea of this patch is to turn llvm/Support/system_error.h into a
transitional header that just brings in the erorr_code api to the llvm
namespace. I will remove it shortly afterwards.
The cases where the general idea needed some tweaking:
* std::errc is a namespace in msvc, so we cannot use "using std::errc". I could
add an #ifdef, but there were not that many uses, so I just added std:: to
them in this patch.
* Template specialization had to be moved to the std namespace in this
patch set already.
* The msvc implementation of default_error_condition doesn't seem to
provide the same transformations as we need. Not too surprising since
the standard doesn't actually say what "equivalent" means. I fixed the
problem by keeping our old mapping and using it at error_code
construction time.
Despite these shortcomings I think this is still a good thing. Some reasons:
* The different implementations of system_error might improve over time.
* It removes 925 lines of code from llvm already.
* It removes 6313 bytes from the text segment of the clang binary when
it is built with gcc and 2816 bytes when building with clang and
libstdc++.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210687 91177308-0d34-0410-b5e6-96231b3b80d8
This is a first step in seeing if it is possible to make llvm-nm produce
the same output as darwin's nm(1). Darwin's default format is bsd but its
-m output prints the longer Mach-O specific details. For now I added the
"-format darwin" to do this (whos name may need to change in the future).
As there are other Mach-O specific flags to nm(1) which I'm hoping to add some
how in the future. But I wanted to see if I could get the correct output for
-m flag using llvm-nm and the libObject interfaces.
I got this working but would love to hear what others think about this approach
to getting object/format specific details printed with llvm-nm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210285 91177308-0d34-0410-b5e6-96231b3b80d8
Input YAML file might contain multiple object file definitions.
New option `-docnum` allows to specify an ordinal number (starting from 1)
of definition used for an object file generation.
Patch reviewed by Sean Silva.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209967 91177308-0d34-0410-b5e6-96231b3b80d8
field represents ELF section header sh_info field and does not have any
sense for regular sections. Its interpretation depends on section type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209801 91177308-0d34-0410-b5e6-96231b3b80d8
Some bit-set fields used in ELF file headers in fact contain two parts.
The first one is a regular bit-field. The second one is an enumeraion.
For example ELF header `e_flags` for MIPS target might contain the
following values:
Bit-set values:
EF_MIPS_NOREORDER = 0x00000001
EF_MIPS_PIC = 0x00000002
EF_MIPS_CPIC = 0x00000004
EF_MIPS_ABI2 = 0x00000020
Enumeration:
EF_MIPS_ARCH_32 = 0x50000000
EF_MIPS_ARCH_64 = 0x60000000
EF_MIPS_ARCH_32R2 = 0x70000000
EF_MIPS_ARCH_64R2 = 0x80000000
For printing bit-sets we use the `yaml::IO::bitSetCase()`. It does not
support bit-set/enumeration combinations and prints too many flags from
an enumeration part. This patch fixes this problem. New method
`yaml::IO::maskedBitSetCase()` handle "enumeration" part of bitset
defined by provided mask.
Patch reviewed by Nick Kledzik and Sean Silva.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209504 91177308-0d34-0410-b5e6-96231b3b80d8
for undefined symbols, so it matches what COFFObjectFile::getSymbolAddress
does. This allows llvm-nm to print spaces instead of 0’s for the value
of undefined symbols in Mach-O files.
To make this change other uses of MachOObjectFile::getSymbolAddress
are updated to handle when the Value is returned as UnknownAddressOrSize.
Which is needed to keep two of the ExecutionEngine tests working for example.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209253 91177308-0d34-0410-b5e6-96231b3b80d8
for undefined symbols. Allowing llvm-nm to print spaces instead of 0’s for
the value of undefined symbols in Mach-O files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209235 91177308-0d34-0410-b5e6-96231b3b80d8
so that llvm-size will total up all the sections in the Berkeley format. This
allows for rough categorizations for Mach-O sections. And allows the total of
llvm-size’s Berkeley and System V formats to be the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209158 91177308-0d34-0410-b5e6-96231b3b80d8
Now the only method to configure ELF section's content and size is to assign
a hexadecimal string to the `Content` field. Unfortunately this way is
completely useless when you need to declare a really large section.
To solve this problem this patch adds one more optional field `Size`
to the `RawContentSection` structure. When yaml2obj generates an ELF file
it uses the following algorithm:
1. If both `Content` and `Size` fields are missed create an empty section.
2. If only `Content` field is missed take section length from the `Size`
field and fill the section by zero.
3. If only `Size` field is missed create a section using data from
the `Content` field.
4. If both `Content` and `Size` fields are provided validate that the `Size`
value is not less than size of `Content` data. Than take section length
from the `Size`, fill beginning of the section by `Content` and the rest
by zero.
Examples
--------
* Create a section 0x10000 bytes long filled by zero
Name: .data
Type: SHT_PROGBITS
Flags: [ SHF_ALLOC ]
Size: 0x10000
* Create a section 0x10000 bytes long starting from 'CA' 'FE' 'BA' 'BE'
Name: .data
Type: SHT_PROGBITS
Flags: [ SHF_ALLOC ]
Content: CAFEBABE
Size: 0x10000
The patch reviewed by Michael Spencer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208995 91177308-0d34-0410-b5e6-96231b3b80d8
