inconsistent both with itself and with LLVM at large with formatting.
The *s were on the wrong side, the indent was off, etc etc. This is much
cleaner.
Also, go clang-format laying out the array of tags in nice columns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202799 91177308-0d34-0410-b5e6-96231b3b80d8
The original code does not work correctly on executable files because the
code is written in such a way that only object files are assumed to be given
to llvm-objdump.
Contents of RuntimeFunction are different between executables and objects. In
executables, fields in RuntimeFunction have actual addresses to unwind info
structures. On the other hand, in object files, the fields have zero value,
but instead there are relocations pointing to the fields, so that Linker will
fill them at link-time.
So, when we are reading an object file, we need to use relocation info to
find the location of unwind info. When executable, we should just look at the
values in RuntimeFunction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202785 91177308-0d34-0410-b5e6-96231b3b80d8
We were dropping the displacement on the floor if we also had some
immediate offset.
Should fix PR19033.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202774 91177308-0d34-0410-b5e6-96231b3b80d8
for the Cortex-A53 subtarget in the AArch64 backend.
This patch lays the ground work to annotate each AArch64 instruction
(no NEON yet) with a list of SchedReadWrite types. The patch also
provides the Cortex-A53 processor resources, maps those the the default
SchedReadWrites, and provides basic latency. NEON support will be added
in a subsequent patch with proper forwarding logic.
Verification was done by setting the pre-RA scheduler to linearize to
better gauge the effect of the MIScheduler. Even without modeling the
forward logic, the results show a modest improvement for Cortex-A53.
Reviewers: apazos, mcrosier, atrick
Patch by Dave Estes <cestes@codeaurora.org>!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202767 91177308-0d34-0410-b5e6-96231b3b80d8
DWARF discriminators are used to distinguish multiple control flow paths
on the same source location. When this happens, instructions across
basic block boundaries will share the same debug location.
This pass detects this situation and creates a new lexical scope to one
of the two instructions. This lexical scope is a child scope of the
original and contains a new discriminator value. This discriminator is
then picked up from MCObjectStreamer::EmitDwarfLocDirective to be
written on the object file.
This fixes http://llvm.org/bugs/show_bug.cgi?id=18270.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202752 91177308-0d34-0410-b5e6-96231b3b80d8
remove_if that its predicate is adaptable. We don't actually need this,
we can write a generic adapter for any predicate.
This lets us remove some very wrong std::function usages. We should
never be using std::function for predicates to algorithms. This incurs
an *indirect* call overhead for every evaluation of the predicate, and
makes it very hard to inline through.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202742 91177308-0d34-0410-b5e6-96231b3b80d8
Breaks the MSVC build.
DataStream.cpp(44): error C2552: 'llvm::Statistic::Value' : non-aggregates cannot be initialized with initializer list
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202731 91177308-0d34-0410-b5e6-96231b3b80d8
With C++11 we finally have a standardized way to specify atomic operations. Use
them to replace the existing custom implemention. Sadly the translation is not
entirely trivial as std::atomic allows more fine-grained control over the
atomicity. I tried to preserve the old semantics as well as possible.
Differential Revision: http://llvm-reviews.chandlerc.com/D2915
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202730 91177308-0d34-0410-b5e6-96231b3b80d8
It's easy to copy unintentionally when using 'auto', particularly inside
range-based for loops. Best practise is to use 'const&' unless there's
a good reason not to.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202729 91177308-0d34-0410-b5e6-96231b3b80d8
The current coding standards restrict the use of struct to PODs, but no
one has been following them. This patch updates the standards to
clarify when structs are dangerous and describe common practice in LLVM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202728 91177308-0d34-0410-b5e6-96231b3b80d8
The shared library generated by autoconf will now be called
libLLVM-$(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_PATCH)$(VERSION_SUFFIX).so
and a symlink named
libLLVM-$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_SUFFIX).so will
also be created in the install directory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202720 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously llvm-config --system-libs would print something like:
$ llvm-config --system-libs
-lz -ltinfo -lrt -ldl -lm
Now we don't emit blank line. Functionality is unchanged otherwise, in
particular llvm-config --libs --system-libs still emits the LLVM libraries
and the system libraries on different lines.
Reviewers: chapuni
Reviewed By: chapuni
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2901
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202719 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Parts of the compiler still believed MSA load/stores have a 16-bit offset when
it is actually 10-bit. Corrected this, and fixed a closely related issue this
uncovered where load/stores with 10-bit and 12-bit offsets (MSA and microMIPS
respectively) could not load/store using offsets from the stack/frame pointer.
They accepted frameindex+offset, but not frameindex by itself.
Reviewers: jacksprat, matheusalmeida
Reviewed By: jacksprat
Differential Revision: http://llvm-reviews.chandlerc.com/D2888
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202717 91177308-0d34-0410-b5e6-96231b3b80d8
a constructor either. Just call the constructor directly. I'll look into
making this work with aggregate initialization some other time (when
I have someone with MSVC 2012 handy to test ideas).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202688 91177308-0d34-0410-b5e6-96231b3b80d8
operand_values. The first provides a range view over operand Use
objects, and the second provides a range view over the Value*s being
used by those operands.
The naming is "STL-style" rather than "LLVM-style" because we have
historically named iterator methods STL-style, and range methods seem to
have far more in common with their iterator counterparts than with
"normal" APIs. Feel free to bikeshed on this one if you want, I'm happy
to change these around if people feel strongly.
I've switched code in SROA and LCG to exercise these mostly to ensure
they work correctly -- we don't really have an easy way to unittest this
and they're trivial.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202687 91177308-0d34-0410-b5e6-96231b3b80d8
proposed std::iterator_pair which was in committee suggested to move
toward std::iterator_range. There isn't a formal paper yet, but there
seems little disagreement within the committee at this point so it seems
fine to provide our own version in the llvm namespace so we can easily
build range adaptors for the numerous iterators in LLVM's interfaces.
Note that I'm not really comfortable advocating a crazed range-based
migration just yet. The range stuff is still in a great deal of flux in
C++ and the committee hasn't entirely made up its mind (afaict) about
how it will work. So I'm mostly trying to provide the minimal
functionality needed to make writing easy and convenient range adaptors
for range based for loops easy and convenient. ;]
Subsequent patches will use this across the fundamental IR types, where
there are iterator views.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202686 91177308-0d34-0410-b5e6-96231b3b80d8
