On instructions using the NZCV register, a couple of conditions have dual
representations: HS/CS and LO/CC (meaning unsigned-higher-or-same/carry-set and
unsigned-lower/carry-clear). The first of these is more descriptive in most
circumstances, so we should print it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207644 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This directive is used for setting up $gp in the beginning of a function.
It expands to three instructions if PIC is enabled:
lui $gp, %hi(_gp_disp)
addui $gp, $gp, %lo(_gp_disp)
addu $gp, $gp, $reg
_gp_disp is a special symbol that the linker sets to the distance between
the lui instruction and the context pointer (_gp).
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3480
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207637 91177308-0d34-0410-b5e6-96231b3b80d8
Since these are mostly used in "lsl #16", "lsl #32", "lsl #48" combinations to
piece together an immediate in 16-bit chunks, hex is probably the most
appropriate format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207635 91177308-0d34-0410-b5e6-96231b3b80d8
This is mostly aimed at the NEON logical operations and MOVI/MVNI (since they
accept weird shifts which are more naturally understandable in hex notation).
Also changes BRK/HINT etc, which is probably a neutral change, but easier than
the alternative.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207634 91177308-0d34-0410-b5e6-96231b3b80d8
Since these instructions only accept a 12-bit immediate, possibly shifted left
by 12, the canonical syntax used by the architecture reference manual is "#N {,
lsl #12 }". We should accept an immediate that has already been shifted, (e.g.
Also, print a comment giving the full addend since it can be helpful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207633 91177308-0d34-0410-b5e6-96231b3b80d8
Emit the COFF header when printing out the function. This is important as the
header contains two important pieces of information: the storage class for the
symbol and the symbol type information. This bit of information is required for
the linker to correctly identify the type of symbol that it is dealing with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207613 91177308-0d34-0410-b5e6-96231b3b80d8
This patch centralizes the handling of the thumb bit around
MCStreamer::isThumbFunc and makes isThumbFunc handle aliases.
This fixes a corner case, but the main advantage is having just one
way to check if a MCSymbol is thumb or not. This should still be
refactored to be ARM only, but at least now it is just one predicate
that has to be refactored instead of 3 (isThumbFunc,
ELF_Other_ThumbFunc, and SF_ThumbFunc).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207522 91177308-0d34-0410-b5e6-96231b3b80d8
When evaluating an assembly expression for a relocation, we want to
stop at MCSymbols that are in the symbol table, even if they are variables.
This is needed since the semantics may require that the relocation use them.
That is not the case when computing the value of a symbol in the symbol table.
There are no relocations in this case and we have to keep going until we hit
a section or find out that the expression doesn't have an assembly time
value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207445 91177308-0d34-0410-b5e6-96231b3b80d8
The symbol table itself has no relocations, so it is not possible to represent
things like
a = undefined + 1
With the patch we just omit these variables. That matches the behaviour of the
gnu assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207419 91177308-0d34-0410-b5e6-96231b3b80d8
Someone couldn't bear to have a completely orthogonal set of floating-point
registers, so we've got some instructions that only accept v0-v15 (coming in
ARMv9, V128_prime: you're allowed v2, v3, v5, v7, ...).
Anyway, we were permitting even the out of range registers during assembly
(CodeGen handled it correctly). This adds a diagnostic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207412 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce support for WoA PE/COFF object file emission from LLVM. Add the new
target specific PE/COFF Streamer (ARMWinCOFFStreamer) that handles the ARM
specific behaviour of PE/COFF object emission. ARM exception information is not
yet emitted and is a TODO item.
The ARM specific object writer (ARMWinCOFFObjectWriter) handles the ARM specific
relocation handling in conjunction with the WinCOFFObjectWriter in the MC layer.
The MC layer needs to be updated to deal with the relocation adjustments.
Branch relocations are adjusted by 4 bytes (unlikely their ELF counterparts).
Minor tweaks to switch multiple conditional checks into equivalent switch
statements. The ObjectFileInfo is updated to relax the object file setup for
Windows COFF. Move the architecture checks into an assertion. Windows COFF is
currently only supported on x86, x86_64, and ARM (thumb). Rather than
defaulting to ELF, we will refuse to generate an object file. This is better
though as you do not get an (arbitrary) object file which is different from the
request.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207345 91177308-0d34-0410-b5e6-96231b3b80d8
This skips a couple of compare ones due to the different syntaxt for
floating-point 0.0. AArch64 does it more canonically, and we'll need to fiddle
ARM64 to make it work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207119 91177308-0d34-0410-b5e6-96231b3b80d8
This matches ARM64 behaviour, which I think is clearer. It also puts all the
churn from that difference into one easily ignored commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207116 91177308-0d34-0410-b5e6-96231b3b80d8
These can have different relocations in ELF. In particular both:
b.eq global
ldr x0, global
are valid, giving different relocations. The only possible way to distinguish
them is via a different fixup, so the operands had to be separated throughout
the backend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207105 91177308-0d34-0410-b5e6-96231b3b80d8
Added support for bytes replication feature, so it could be GAS compatible.
E.g. instructions below:
"vmov.i32 d0, 0xffffffff"
"vmvn.i32 d0, 0xabababab"
"vmov.i32 d0, 0xabababab"
"vmov.i16 d0, 0xabab"
are incorrect, but we could deal with such cases.
For first one we should emit:
"vmov.i8 d0, 0xff"
For second one ("vmvn"):
"vmov.i8 d0, 0x54"
For last two instructions it should emit:
"vmov.i8 d0, 0xab"
P.S.: In ARMAsmParser.cpp I have also fixed few nearby style issues in old code.
Just for keeping method bodies in harmony with themselves.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207080 91177308-0d34-0410-b5e6-96231b3b80d8
This is dependent on changes that are not fully ready to be merged yet (WoA
object file emission). The test can be re-enabled for that target later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207038 91177308-0d34-0410-b5e6-96231b3b80d8
The test was changed from aarch64 to arm64 but not moved. The test would fail
if the backend was not built.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207029 91177308-0d34-0410-b5e6-96231b3b80d8
Emit the flag to indicate to the assembler that a section contains data if there
is pre-populated data present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207028 91177308-0d34-0410-b5e6-96231b3b80d8
AArch64 has feature predicates for NEON, FP and CRYPTO instructions.
This allows the compiler to generate code without using FP, NEON
or CRYPTO instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206949 91177308-0d34-0410-b5e6-96231b3b80d8
diagnostic that includes location information.
Currently if one has this assembly:
.quad (0x1234 + (4 * SOME_VALUE))
where SOME_VALUE is undefined ones gets the less than
useful error message with no location information:
% clang -c x.s
clang -cc1as: fatal error: error in backend: expected relocatable expression
With this fix one now gets a more useful error message
with location information:
% clang -c x.s
x.s:5:8: error: expected relocatable expression
.quad (0x1234 + (4 * SOME_VALUE))
^
To do this I plumbed the SMLoc through the MCObjectStreamer
EmitValue() and EmitValueImpl() interfaces so it could be used
when creating the MCFixup.
rdar://12391022
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206906 91177308-0d34-0410-b5e6-96231b3b80d8
Make sure only general purpose registers are valid for offset regs and
that 32-bit regs are only valid for sxtw and uxtw extends.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206799 91177308-0d34-0410-b5e6-96231b3b80d8
With this MC is able to handle _GLOBAL_OFFSET_TABLE_ in 64 bit mode, which is
needed for medium and large code models.
This fixes pr19470.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206793 91177308-0d34-0410-b5e6-96231b3b80d8
expressions for mov instructions instead of silently truncating by default.
For the ARM assembler, we want to avoid misleadingly allowing something
like "mov r0, <symbol>" especially when we turn it into a movw and the
expression <symbol> does not have a :lower16: or :upper16" as part of the
expression. We don't want the behavior of silently truncating, which can be
unexpected and lead to bugs that are difficult to find since this is an easy
mistake to make.
This does change the previous behavior of llvm but actually matches an
older gnu assembler that would not allow this but print less useful errors
of like “invalid constant (0x927c0) after fixup” and “unsupported relocation on
symbol foo”. The error for llvm is "immediate expression for mov requires
:lower16: or :upper16" with correct location information on the operand
as shown in the added test cases.
rdar://12342160
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206669 91177308-0d34-0410-b5e6-96231b3b80d8
Both ZLIB and the debug info compressed section header ("ZLIB" + the
size of the uncompressed data) take some constant overhead so in some
cases the compressed data is actually larger than the uncompressed data.
In these cases, just don't compress or rename the section at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206659 91177308-0d34-0410-b5e6-96231b3b80d8
While unnamed relocations are already cached in side tables in
ELFObjectWriter::RecordRelocation, symbols still need their fragments
updated to refer to the newly compressed fragment (even if that fragment
isn't big enough to fit the offset). Even though we only create
temporary symbols in debug info sections this comes up in 32 bit builds
where even temporary symbols in mergeable sections (such as debug_str)
have to be emitted as named symbols.
I tried a few other ways to do this but they all didn't work for various
reasons:
1) Canonicalize the MCSymbolData in RecordRelocation, nulling out the
Fragment (so it didn't have to be updated by CompressDebugSection). This
doesn't work because some code relies on symbols having fragments to
indicate that they're defined, I think.
2) Canonicalize the MCSymbolData in RecordRelocation to be "first
fragment + absolute offset" so it would be cheaper to just test and
update the fragment in CompressDebugSections. This doesn't work because
the offset computed in RecordRelocation isn't that of the symbol's
fragment, it's the passed in fragment (I haven't figured out what that
fragment is - perhaps it's the location where the relocation is to be
written). And if the fragment offset has to be computed only for this
use we might as well just do it when we need to, in
CompressDebugSection.
I also added an assert to help catch this a bit more clearly, even
though it is UB. The test case improvements would either assert fail
and/or valgrind vail without the fix, even if they wouldn't necessarily
fail the FileCheck output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206653 91177308-0d34-0410-b5e6-96231b3b80d8
