It was previously not being built on Windows because the cmake file relied
on a sed script to generate a .in file that llvm-config needs.
By using cmake's configure_file function, we can get rid off the sed hack,
and also have this work on Windows.
Differential Revision: http://llvm-reviews.chandlerc.com/D1481
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189125 91177308-0d34-0410-b5e6-96231b3b80d8
Allow CMake to pick up external projects in llvm/tools without the need to modify the "llvm/tools/CMakeLists.txt" file.
This makes it easier to work with projects that live in other repositories, without needing to specify each one in "llvm/tools/CMakeLists.txt".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188921 91177308-0d34-0410-b5e6-96231b3b80d8
Like yaml ObjectFiles, this will be very useful for testing the MC CFG
implementation (mostly MCObjectDisassembler), by matching the output
with YAML, and for potential users of the MC CFG, by using it as an input.
There isn't much to the actual format, it is just a serialization of the
MCModule class. Of note:
- Basic block references (pred/succ, ..) are represented by the BB's
start address.
- Just as in the MC CFG, instructions are MCInsts with a size.
- Operands have a prefix representing the type (only register and
immediate supported here).
- Instruction opcodes are represented by their names; enum values aren't
stable, enum names mostly are: usually, a change to a name would need
lots of changes in the backend anyway.
Same with registers.
All in all, an example is better than 1000 words, here goes:
A simple binary:
Disassembly of section __TEXT,__text:
_main:
100000f9c: 48 8b 46 08 movq 8(%rsi), %rax
100000fa0: 0f be 00 movsbl (%rax), %eax
100000fa3: 3b 04 25 48 00 00 00 cmpl 72, %eax
100000faa: 0f 8c 07 00 00 00 jl 7 <.Lend>
100000fb0: 2b 04 25 48 00 00 00 subl 72, %eax
.Lend:
100000fb7: c3 ret
And the (pretty verbose) generated YAML:
---
Atoms:
- StartAddress: 0x0000000100000F9C
Size: 20
Type: Text
Content:
- Inst: MOV64rm
Size: 4
Ops: [ RRAX, RRSI, I1, R, I8, R ]
- Inst: MOVSX32rm8
Size: 3
Ops: [ REAX, RRAX, I1, R, I0, R ]
- Inst: CMP32rm
Size: 7
Ops: [ REAX, R, I1, R, I72, R ]
- Inst: JL_4
Size: 6
Ops: [ I7 ]
- StartAddress: 0x0000000100000FB0
Size: 7
Type: Text
Content:
- Inst: SUB32rm
Size: 7
Ops: [ REAX, REAX, R, I1, R, I72, R ]
- StartAddress: 0x0000000100000FB7
Size: 1
Type: Text
Content:
- Inst: RET
Size: 1
Ops: [ ]
Functions:
- Name: __text
BasicBlocks:
- Address: 0x0000000100000F9C
Preds: [ ]
Succs: [ 0x0000000100000FB7, 0x0000000100000FB0 ]
<snip>
...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188890 91177308-0d34-0410-b5e6-96231b3b80d8
In order to appease people (in Apple) who accuse me for committing "huge change" (?) without proper review.
Thank Eric for fixing a compile-warning.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188204 91177308-0d34-0410-b5e6-96231b3b80d8
1. Add some helper classes for partitions. They are designed in a
way such that the top-level LTO driver will not see much difference
with or without partitioning.
2. Introduce work-dir. Now all intermediate files generated during
LTO phases will be saved under work-dir. User can specify the workdir
via -lto-workdir=/path/to/dir. By default the work-dir will be
erased before linker exit. To keep the workdir, do -lto-keep, or -lto-keep=1.
TODO: Erase the workdir, if the linker exit prematurely.
We are currently not able to remove directory on signal. The support
routines simply ignore directory.
3. Add one new API lto_codegen_get_files_need_remove().
Linker and LTO plugin will communicate via this API about which files
(including directories) need to removed before linker exit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188188 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, when an invalid attribute is encountered on processing a .s file,
clang will abort due to llvm_unreachable. Invalid user input should not cause
an abnormal termination of the compiler. Change the interface to return a
boolean to indicate the failure as a first step towards improving hanlding of
malformed user input to clang.
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188047 91177308-0d34-0410-b5e6-96231b3b80d8
* ELFTypes.h contains template magic for defining types based on endianess, size, and alignment.
* ELFFile.h defines the ELFFile class which provides low level ELF specific access.
* ELFObjectFile.h contains ELFObjectFile which uses ELFFile to implement the ObjectFile interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188022 91177308-0d34-0410-b5e6-96231b3b80d8
As of this revision, all functions of LTOCodeGenerator are consistent in
ret-true-on-succ.
Tested on multiple OSes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187864 91177308-0d34-0410-b5e6-96231b3b80d8
The ExtractLoops function tries to reduce the failing test case by extracting
one or more loops from the misoptimized piece of the program. In doing this,
ExtractLoops must keep the MiscompiledFunctions vector up-to-date by ensuring
that the pointers refer to functions in the current failing program.
Unfortunately, this is not trivial because:
- ExtractLoops is iterative, and there are several early exits (and the
MiscompiledFunctions vector must be consistent with the current program at
every non-fatal exit point).
- Several of the utility functions used by ExtractLoops (such as
TestOptimizer, some of which are called through the TestFn callback
parameter, and Linker::LinkModules) delete their inputs upon success.
This change adds several updates of the MiscompiledFunctions vector at
different points. The first is after the initial call to TestMergedProgram
which checks that the loop-extracted program still works. The second is after
the call to TestFn (TestOptimizer, for example). This function will delete its
inputs (which is why the existing ExtractLoops logic cloned the inputs first).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187674 91177308-0d34-0410-b5e6-96231b3b80d8
Function attributes are the future! So just query whether we want to realign the
stack directly from the function instead of through a random target options
structure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187618 91177308-0d34-0410-b5e6-96231b3b80d8
If no other operation is specified, 's' becomes an operation instead of an
modifier. The s operation just creates a symbol table. It is the same as
running ranlib.
We assume the archive was created by a sane ar (like llvm-ar or gnu ar) and
if the symbol table is present, then it is current. We use that to optimize
the most common case: a broken build system that thinks it has to run ranlib.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187353 91177308-0d34-0410-b5e6-96231b3b80d8
Merge consecutive if-regions if they contain identical statements.
Both transformations reduce number of branches. The transformation
is guarded by a target-hook, and is currently enabled only for +R600,
but the correctness has been tested on X86 target using a variety of
CPU benchmarks.
Patch by: Mei Ye
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187278 91177308-0d34-0410-b5e6-96231b3b80d8
There's no need to specify a flag to omit frame pointer elimination on non-leaf
nodes...(Honestly, I can't parse that option out.) Use the function attribute
stuff instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187093 91177308-0d34-0410-b5e6-96231b3b80d8
The main observation is that we never need both the filesize and the map size.
When mapping a slice of a file, it doesn't make sense to request a null
terminator and that would be the only case where the filesize would be used.
There are other cleanups that should be done in this area:
* A client should not have to pass the size (even an explicit -1) to say if
it wants a null terminator or not, so we should probably swap the argument
order.
* The default should be to not require a null terminator. Very few clients
require this, but many end up asking for it just because it is the default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186984 91177308-0d34-0410-b5e6-96231b3b80d8
The gold plugin was passing the desired map size as the file size. This was
working for two reasons:
* Recent version of gold provide the get_view callback, so this code was not
used.
* In older versions, getOpenFile was called, but the file size is never used
if we don't require null terminated buffers and map size defaults to the
file size.
Thanks to Eli Bendersky for noticing this.
I will try to make this api a bit less error prone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186978 91177308-0d34-0410-b5e6-96231b3b80d8
The symbol table has forward references in the file. Instead of allocating
a temporary buffer or counting the size and then writing, this implementation
writes a dummy value first and patches it once the final value is known.
There is room for performance improvement. I will implement them as soon as I
get some other features (like a ranlib mode) in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186934 91177308-0d34-0410-b5e6-96231b3b80d8
Use the function attributes to pass along the stack protector buffer size.
Now that we have robust function attributes, don't use a command line option to
specify the stack protecto buffer size.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186863 91177308-0d34-0410-b5e6-96231b3b80d8
There already have two "dead" functions, initialize{IPO|IPA}, defined for
similar purpose. I decide not to call these two functions for two reasons:
o. they don't cover all LTO passes (which will soon be separated into IPO
and post-IPO passes)
o. We have not yet figured out the right passes and the ordering for IPO
and post-IPO stages, meaning this change is only for the time being.
Since LTO passes are registered, we are now able to print IR before and
after particular point.
For OSX users:
--------------
"...-Wl,-mllvm -Wl,-print-after=<pass-name>" will print IR after the
specified pass.
For Other UNIX with GNU gold linker:
------------------------------------
"-Wl,-plugin-opt=-print-after=<pass-name>" should work.
(NOTE: no need for "-Wl,-mllvm")
Strip "-Wl," if flags are fed directly to linker instead of clang/clang++.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186853 91177308-0d34-0410-b5e6-96231b3b80d8
This matches gnu archive behavior and since archive member order can change
which member is used, not changing the order on replacement looks like the
right thing to do.
This patch also refactors the logic for which archive member to keep and
whether to move it to a helper function (computeInsertAction). The
nesting in computeNewArchiveMembers was getting a bit confusing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186829 91177308-0d34-0410-b5e6-96231b3b80d8
We were incorrectly computing where to insert a member if it was replacing
a previous member that was before the insert point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186792 91177308-0d34-0410-b5e6-96231b3b80d8
The original change was rolled back in r186627 because of test
failures on the big endian machine. I believe I fixed the issue
so re-submitting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186734 91177308-0d34-0410-b5e6-96231b3b80d8
This allows "llvm-mc -disassemble" to accept two new features:
+ Using comma as a byte separator
+ Grouping bytes with '[' and ']' pairs.
The behaviour outside a [...] group is unchanged. But within the group once
llvm-mc encounters a true error, it stops rather than trying to resynchronise
the stream at the next byte. This is more useful for disassembly tests, where
we have an almost-instruction in mind and don't care what the misaligned
interpretation would be. Particularly if it means llvm-mc won't actually see
the next intended almost-instruction.
As a side effect, this means llvm-mc can disassemble its own -show-encoding
output if copy-pasted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186661 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Dump optional data directory entries in the PE/COFF header, so that
we can test the output of LLD linker. This patch updates the test binary
file, but the source of the binary is the same. I just re-linked the file.
I don't know how the previous file was linked, but the previous file did
not have any data directory entries for some reason.
Reviewers: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1148
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186623 91177308-0d34-0410-b5e6-96231b3b80d8
This centralizes the handling of O_BINARY and opens the way for hiding more
differences (like how open behaves with directories).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186447 91177308-0d34-0410-b5e6-96231b3b80d8
