MO_ConstantPoolIndex is handled in printLeaMemReference.
MO_JumpTableIndex and MO_ExternalSymbol don't show up in inline asm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195847 91177308-0d34-0410-b5e6-96231b3b80d8
It is only used for asm printing.
On X86 we put basic block addresses on register before passing them to inline
asm, so the MO_MachineBasicBlock case was dead.
MO_ExternalSymbol was dead since any symbol being passed to inline asm
is represented as MO_GlobalAddress.
The MO_GlobalAddress and MO_Register cases were not tested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195824 91177308-0d34-0410-b5e6-96231b3b80d8
- Fix bug in (vsext (vzext x)) -> (vsext x) in SIGN_EXTEND_IN_REG
lowering where we need to check whether x is a vector type (in-reg
type) of i8, i16 or i32; otherwise, that optimization is not valid.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195779 91177308-0d34-0410-b5e6-96231b3b80d8
We would wrongly transform the testcase into the equivalent of an AND with 1.
The problem was that, when testing whether the shifted-in bits of the right
shift were significant, we used the width of the final zero-extended result
rather than the width of the shifted value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195731 91177308-0d34-0410-b5e6-96231b3b80d8
A Direct stack map location records the address of frame index. This
address is itself the value that the runtime requested. This differs
from IndirectMemRefOp locations, which refer to a stack locations from
which the requested values must be loaded. Direct locations can
directly communicate the address if an alloca, while IndirectMemRefOp
handle register spills.
For example:
entry:
%a = alloca i64...
llvm.experimental.stackmap(i32 <ID>, i32 <shadowBytes>, i64* %a)
Since both the alloca and stackmap intrinsic are in the entry block,
and the intrinsic takes the address of the alloca, the runtime can
assume that LLVM will not substitute alloca with any intervening
value. This must be verified by the runtime by checking that the stack
map's location is a Direct location type. The runtime can then
determine the alloca's relative location on the stack immediately after
compilation, or at any time thereafter. This differs from Register and
Indirect locations, because the runtime can only read the values in
those locations when execution reaches the instruction address of the
stack map.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195712 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Mikulas Patocka. I added the test. I checked that for cpu names that
gas knows about, it also doesn't generate nopl.
The modified cpus:
i686 - there are i686-class CPUs that don't have nopl: Via c3, Transmeta
Crusoe, Microsoft VirtualBox - see
https://bbs.archlinux.org/viewtopic.php?pid=775414
k6, k6-2, k6-3, winchip-c6, winchip2 - these are 586-class CPUs
via c3 c3-2 - see https://bugs.archlinux.org/task/19733 as a proof that
Via c3 and c3-Nehemiah don't have nopl
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195679 91177308-0d34-0410-b5e6-96231b3b80d8
These are handled almost identically to static mode (and ELF's global address
materialisation), except that a symbol may have "$non_lazy_ptr" appended. This
can be handled by passing appropriate flags along with the instruction instead
of using entirely separate pseudo-instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195655 91177308-0d34-0410-b5e6-96231b3b80d8
There is no sane way for an LEApcrel (= single ADR) instruction to generate a
global address on any ARM target I know of. Fortunately, no-one was trying to
any more, but there were vestigial patterns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195644 91177308-0d34-0410-b5e6-96231b3b80d8
to what is needed for constant islands. The prescan method for Mips16 constant
islands will eventually go away. It is only temporary and should be done
earlier when the instructions are first created or from the DAG. If we keep
it here we need to handle better the situation where constant islands
is called multiple times since don't want to prescan more than once.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195569 91177308-0d34-0410-b5e6-96231b3b80d8
I had to move some code and I moved a declaration forward past it's first use
in the function but by nutty coincidence there was another variable of the same
name and type and with completely unrelated function that was declared globally
in the class so no compilation error ensued.
It required some unusual conditions for it to even matter. Caused test
case casts.c in test-suite to fail during compilation with a duplicate
symbol error. I would have noticed it during final code review for this port.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195565 91177308-0d34-0410-b5e6-96231b3b80d8
We were ignoring the ordered/onordered bits and also the signed/unsigned
bits of condition codes when lowering the DAG to MachineInstrs.
NOTE: This is a candidate for the 3.4 branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195514 91177308-0d34-0410-b5e6-96231b3b80d8
Utilizing the 8 and 16 bit comparison instructions, even when an input can
be folded into the comparison instruction itself, is typically not worth it.
There are too many partial register stalls as a result, leading to significant
slowdowns. By always performing comparisons on at least 32-bit
registers, performance of the calculation chain leading to the
comparison improves. Continue to use the smaller comparisons when
minimizing size, as that allows better folding of loads into the
comparison instructions.
rdar://15386341
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195496 91177308-0d34-0410-b5e6-96231b3b80d8
Improvements over r195317:
- Set/restore EnableFastISel flag instead of just running FastISel within
SelectAllBasicBlocks; the flag is checked in various places, and
FastISel won't run properly if those places don't do the right thing.
- Test looks for normal ISel versus FastISel behavior, and not
something more subtle that doesn't work everywhere.
Based on work by Andrea Di Biagio.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195491 91177308-0d34-0410-b5e6-96231b3b80d8
- When simplifying the mask generation for BLEND, check whether that mask is
also consumed by other non-BLEND insns. If true, skip that simplification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195476 91177308-0d34-0410-b5e6-96231b3b80d8
I've no idea why I decided to handle TMxx differently from all the other
high/low logic operations, but it was a stupid thing to do. The high
registers aren't available as separate 32-bit registers on z10,
so subreg_h32 can't be used on a GR64 there.
I've normally been testing with z196 and with -O3 and so hadn't noticed
this until now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195473 91177308-0d34-0410-b5e6-96231b3b80d8
lowerBUILD_VECTOR() was treating integer constant splats as being legal
regardless of whether they had undef values. This caused instruction
selection failures when the undefs were legalized to zero, making the
constant non-splat.
Fixed this by requiring HasAnyUndef to be false for a integer constant
splat to be legal. If it is true, a new node is generated with the undefs
replaced with the necessary values to remain a splat.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195455 91177308-0d34-0410-b5e6-96231b3b80d8
e.g. "%tmp = load <2 x i64>* %ptr" can't be selected.
"%tmp = bitcast i64 %in to <2 x i32>" can't be selected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195424 91177308-0d34-0410-b5e6-96231b3b80d8
