Summary:
Remove the XFAIL added in my previous commit and correct the test such that
it correctly tests the expansion of the assembler temporary.
Also added a test to check that $at is always $1 when written by the
user.
Corrected the new assembler temporary warnings so that they are emitted for
numeric registers too.
Differential Revision: http://llvm-reviews.chandlerc.com/D3169
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204711 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The assembler temporary is normally $at ($1) but can be reassigned using
'.set at=$reg'. Regardless of which register is nominated as the assembler
temporary, $at remains $1 when written by the user.
Adds warnings under the following conditions:
* The register nominated as the assembler temporary is used by the user.
* '.set noat' is in effect and $at is used by the user.
Both of these only work for named registers. I have a follow up commit that makes it work for numeric registers as well.
XFAIL set-at-directive.s since it incorrectly tests that $at is redefined by
'.set at=$reg'. Testcases will follow in a separate commit.
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
Differential Revision: http://llvm-reviews.chandlerc.com/D3167
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204710 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
- If only two registers are passed to a three-register operation, then the
first argument is both source and destination register.
- If a non-register is passed as the last argument, generate the immediate
version of the instruction.
Also mark DADD commutative and add scheduling information (to the generic
scheduler), and implement DSUB.
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
CC: theraven
Differential Revision: http://llvm-reviews.chandlerc.com/D3148
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204605 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
VECTOR_SHUFFLE concatenates the vectors in an vectorwise fashion.
<0b00, 0b01> + <0b10, 0b11> -> <0b00, 0b01, 0b10, 0b11>
VSHF concatenates the vectors in a bitwise fashion:
<0b00, 0b01> + <0b10, 0b11> ->
0b0100 + 0b1110 -> 0b01001110
<0b10, 0b11, 0b00, 0b01>
We must therefore swap the operands to get the correct result.
The test case that discovered the issue was MultiSource/Benchmarks/nbench.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3142
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204480 91177308-0d34-0410-b5e6-96231b3b80d8
The Octeon cpu from Cavium Networks is mips64r2 based and has an extended
instruction set. In order to utilize this with LLVM, a new cpu feature "octeon"
and a subtarget feature "cnmips" is added. A small set of new instructions
(baddu, dmul, pop, dpop, seq, sne) is also added. LLVM generates dmul, pop and
dpop instructions with option -mcpu=octeon or -mattr=+cnmips.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204337 91177308-0d34-0410-b5e6-96231b3b80d8
operator* on the by-operand iterators to return a MachineOperand& rather than
a MachineInstr&. At this point they almost behave like normal iterators!
Again, this requires making some existing loops more verbose, but should pave
the way for the big range-based for-loop cleanups in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203865 91177308-0d34-0410-b5e6-96231b3b80d8
When printing assembly we don't have a Layout object, but we can still
try to fold some constants.
Testcase by Ulrich Weigand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203677 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a white lie to workaround a widespread bug in the -mfp64
implementation.
The problem is that none of the 32-bit fpu ops mention the fact that they
clobber the upper 32-bits of the 64-bit FPR. This allows MTHC1 to be
scheduled on the wrong side of most 32-bit FPU ops, particularly MTC1.
Fixing that requires a major overhaul of the FPU implementation which can't
be done right now due to time constraints.
The testcase is SingleSource/Benchmarks/Misc/oourafft.c when given
TARGET_CFLAGS='-mips32r2 mfp64 -mmsa'.
Also correct the comment added in r203464 to indicate that two
instructions were affected.
Reviewers: matheusalmeida, jacksprat
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3029
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203659 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Correct the match patterns and the lowerings that made the CodeGen tests pass despite the mistakes.
The original testcase that discovered the problem was SingleSource/UnitTests/SignlessType/factor.c in test-suite.
During review, we also found that some of the existing CodeGen tests were incorrect and fixed them:
* bitwise.ll: In bsel_v16i8 the IfSet/IfClear were reversed because bsel and bmnz have different operand orders and the test didn't correctly account for this. bmnz goes 'IfClear, IfSet, CondMask', while bsel goes 'CondMask, IfClear, IfSet'.
* vec.ll: In the cases where a bsel is emitted as a bmnz (they are the same operation with a different input tied to the result) the operands were in the wrong order.
* compare.ll and compare_float.ll: The bsel operand order was correct for a greater-than comparison, but a greater-than comparison instruction doesn't exist. Lowering this operation inverts the condition so the IfSet/IfClear need to be swapped to match.
The differences between BSEL, BMNZ, and BMZ and how they map to/from vselect are rather confusing. I've therefore added a note to MSA.txt to explain this in a single place in addition to the comments that explain each case.
Reviewers: matheusalmeida, jacksprat
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3028
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203657 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a white lie to workaround a widespread bug in the -mfp64
implementation.
The problem is that none of the 32-bit fpu ops mention the fact that they
clobber the upper 32-bits of the 64-bit FPR. This allows MFHC1 to be
scheduled on the wrong side of most 32-bit FPU ops. Fixing that requires a
major overhaul of the FPU implementation which can't be done right now due to
time constraints.
MFHC1 is one of two affected instructions. These instructions are the only
FPU instructions that don't read or write the lower 32-bits. We therefore
pretend that it reads the bottom 32-bits to artificially create a dependency and
prevent the scheduler changing the behaviour of the code.
The other instruction is MTHC1 which will be fixed once I've have found a failing
test case for it.
The testcase is test-suite/SingleSource/UnitTests/Vector/simple.c when
given TARGET_CFLAGS="-mips32r2 -mfp64 -mmsa".
Reviewers: jacksprat, matheusalmeida
Reviewed By: jacksprat
Differential Revision: http://llvm-reviews.chandlerc.com/D2966
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203464 91177308-0d34-0410-b5e6-96231b3b80d8
The old system was fairly convoluted:
* A temporary label was created.
* A single PROLOG_LABEL was created with it.
* A few MCCFIInstructions were created with the same label.
The semantics were that the cfi instructions were mapped to the PROLOG_LABEL
via the temporary label. The output position was that of the PROLOG_LABEL.
The temporary label itself was used only for doing the mapping.
The new CFI_INSTRUCTION has a 1:1 mapping to MCCFIInstructions and points to
one by holding an index into the CFI instructions of this function.
I did consider removing MMI.getFrameInstructions completelly and having
CFI_INSTRUCTION own a MCCFIInstruction, but MCCFIInstructions have non
trivial constructors and destructors and are somewhat big, so the this setup
is probably better.
The net result is that we don't create temporary labels that are never used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203204 91177308-0d34-0410-b5e6-96231b3b80d8
directly care about the Value class (it is templated so that the key can
be any arbitrary Value subclass), it is in fact concretely tied to the
Value class through the ValueHandle's CallbackVH interface which relies
on the key type being some Value subclass to establish the value handle
chain.
Ironically, the unittest is already in the right library.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202824 91177308-0d34-0410-b5e6-96231b3b80d8
business.
This header includes Function and BasicBlock and directly uses the
interfaces of both classes. It has to do with the IR, it even has that
in the name. =] Put it in the library it belongs to.
This is one step toward making LLVM's Support library survive a C++
modules bootstrap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202814 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Parts of the compiler still believed MSA load/stores have a 16-bit offset when
it is actually 10-bit. Corrected this, and fixed a closely related issue this
uncovered where load/stores with 10-bit and 12-bit offsets (MSA and microMIPS
respectively) could not load/store using offsets from the stack/frame pointer.
They accepted frameindex+offset, but not frameindex by itself.
Reviewers: jacksprat, matheusalmeida
Reviewed By: jacksprat
Differential Revision: http://llvm-reviews.chandlerc.com/D2888
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202717 91177308-0d34-0410-b5e6-96231b3b80d8
